|
| 1 | Dismantling of plainor corrugated steel sheets, any guage, thickness incl nainital of similar pattern roof coveringincluding ridges, complete all as specified and directed. |
| 2 | Dismantling asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings including ridges, complete all as specified and directed by Engineer-In-Charge. |
| 3 | Dismantling taking down framed trusses of span not exceeding 10m, complete all as specified and directed. |
| 4 | Taking down chowkats or frames with shutters not exceeding 1.5 sqm each (without taking off shutters from the frames), complete all as specified and directed. |
| 5 | Taking down chowkats or frames with shutters exceeding 1.5 sqm but not exceeding 4 sqm each (without taking off shutters from the frames). Complete all as specified and directed. |
| 6 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 7 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc. Complete all as specified and directed. |
| 8 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 9 | Demolition reinforced cement concrete of any description and in any position not otherwise specifically provided for. Complete all as specified and directed. |
| 10 | Demolition cement concrete of any description and in any position not otherwise specifically provided for. Complete all as specified and directed. |
| 11 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, complete all as specified and directed. |
| 12 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thicknness, including cover fillets, complete all as specified and directed. |
| 13 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 14 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 15 | Supply and Fixing mild steel work in tubular trusses including spcial shaped washer, vertical Post, including bracket, tee, distance pieces,cleatetc, complete using ERW or induction butt welded tubes, conforming to IS 1161-1979 grade St-240 complete all as specified and directed. |
| 16 | Erection and fixing only steel tubular work as in purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240. Complete all as specified and directed. |
| 17 | S&F rolled mild steel Fe 10-W (Gde-E-250) qualiy-A in Joist, channel, angle,tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and directed. |
| 18 | M&L for preparation of old steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed. |
| 19 | M&L for preparation of New steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed. |
| 20 | M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 21 | -ditto- all as per item No. 20 above but except bricks etc; complete all as specified and directed. |
| 22 | M&L for cement concrete Type B1, 1:2:4 (20mm graded aggregate)in lintels upto 1.5m clear span, cill, bands, plinth courses, coping etc and similar work, including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 23 | M&L for form workto sides and sofits of floor or roof beam, girders,lintel, cantilever, shelves includingsupports overhangs, opening of concrete walls, side of RCC/PCC band and lintel in walls, horizontal or slopin and similar work complete all as specified and directed. |
| 24 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to. Complete all as specified and directed by Engineer-In-Charge. |
| 25 | -ditto- all as per item No. 24 above but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders. Complete all as specified and directed. |
| 26 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 on walls finished even and fair, complete all as specified and directed. |
| 27 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls finished even and fair, complete all as specified and directed. |
| 28 | M&L for preparation of new plastered surfaces and applying two coats of cement base paint over and including a coat of chalk whiting/priming on plastered surfaces of walls, complete all as specified and directed. |
| 29 | M&L for preparation of new plastered surfaces and applying Two Coats Oill Bound Distemper over a coat of primer and 1mm thick wall care putty , complete all as specified and directed. |
| 30 | S&F of vitrified ceramic colour light shedtiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm.m. in floors etc, set and jointed in neat cement slurry and pointed in white or colours cement to match with tilesand including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 31 | S&F of vitrified Ceramic Colour light shedTiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm.m. in Skirting etc, set and jointed in neat cement slurry and pointed in white or colours cement to match with tilesand including 15mm thick screed bed in cement mortar 1:6. Complete all as specified and directed. |
| 32 | S&F of non Skid Ceramic Coloured Tiles 7 to 8mm thick(square/rectangular) areaof each tilesexceeding 0.11sq.m. but not exceeding 0.18sq.m, in floorsetc, set and jointed in neat cement slurry and pointed in white or colours cement to match with tilesand including 15mm thick screed bed in cement mortar 1:6. Complete all as specified and directed. |
| 33 | S&F of non Skid Ceramic Coloured joint free tiles 7 to 8mm thick(square/rectangular) areaof each tilesexceeding 0.11sq.m. but not exceeding 0.18sq.m, in floorsetc, set and jointed in neat cement slurry and pointed in white or colours cement to match with tilesand including 15mm thick screed bed in cement mortar 1:6. Complete all as specified and directed. |
| 34 | S&F of glazed ceramic tiles in vertical surfaces 350x250x7mm/450x350x7mm thick setand jointed in neat cement slury and pointed in white or colour cement to match with tiles Complete all as specified and directed. |
| 35 | M&L for machine cut kota stone slab flooring 16-18 mm thick,area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement and sand mortar 1:4, complete all as specified. |
| 36 | M&L for machine cut kota stone slab flooring 16-18 mm thick over and incl 10 mm thick rendering in cement and sand mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab as in riser of steps/ pillars/ skirting/ dado including rubbing and polishing complete all as specified and directed. |
| 37 | M&L for 75mm thick cement concrete type D-2, 1:4:8 as in Subbase flooring, complete all as specified and directed by Engineer-in-Charge. |
| 38 | M&L for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in plinth protection finished even and smooth (without using extra cement), complete all as specified and directed by Engineer-In-Charge. |
| 39 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 40 | S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing , complete all as specified and directed by Engineer-In-Charge. |
| 41 | S&F factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrappd on an additional square 8mm MS solid tube and this tube shall be welded to MS tubes. The wire gauge shall be stretched to tighten firmly Complete all as per drawing and all as specified and directed by Engineer-In-Charge. |
| 42 | Material and labour for ceiling using 9mm thick gypsum based ceiling tiles with wheather resistance face on back side and vinyl finish including framework on the front fixed in 24mm GI armstrong frame work of grid 600x600 mm size, the members of snap grid frame work of GI/Steel section of 24mm wide with T-flanges, channels etc of white colour having rotary stiching on all members, i.e main runner, 1200x600mm cross tee galvanised with minimum thickness of 120 gms per/sqm passed through 500 hrs test and hanging the same with existing roof members such as rafters, pulins or other wooden members particularly provided for hanging pupose using 8mm dia mild steel bar of required length fixed with nut bolt of 50mm long and 10mm dia of neck with washer flat iron 50x6mm thick clamps etc to steel members, complete all as specified and directed by Engineer-In-Charge. |
| 43 | Supply and fix 6mm thick PVC hollow wall paneling plain/coloured/printed fixed with screws to wall and corner, edges of panels be sealed with appropriate arrangement, colour and pattern as approvedComplete all as specified and as directed. |
| 44 | S&F powder coated anodised aluminium frame (thickness of powder coating not less than 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 45 | S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinge type B-21 100mm long (2 Nos) suitable handle (1 No.) complete all as specified and directed. |
| 46 | S&F aluminium diamond grill security window with flyscreens, average width of aperture 75mm, premium quality security window with 20mm frame(thickness) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittingscomplete all as specified and directed. |
| 47 | S&F aluminium alloy wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified & directed. |
| 48 | Supply and fix 5.50mm thick sheet glass but exc 0.5sq.m in each , ordinary quality and glazing with beads fixed with metal panel pins with solar control dil 25micron reflective type sicked to glass panes as per instruction of manufacturers complete all as specified and directed. |
| 49 | Supply and fixing for 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sq. m in each pane complete all as specified and directed. |
| 50 | S&F,aluminium (extruded section)door closer hydraulically regulated designationNo 3, universal type, suitable for door shutters of851 to 1000mm in width and of weight between 61 to 80 kg and fixed in repair complete all as specified and directed. |
| 51 | S&F of floor door stopper 140mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor all as specified and directed. |
| 52 | S&F of 200 mm size, brassbarrel tower bolts with cast or sheet barrel and rolled & fixed completeall as specified and as directed. |
| 53 | S&F of 150 mm size, aluminium anodised , barrel tower bolts of extruded section & fixed completeall as specified and as directed. |
| 54 | S&F in repair aluminium hat and coat hooks, solid body, 175mm to 250 mmfixed to wall with screws complete all as specified & as directed. |
| 55 | S&F of solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, & fixing in opening complete as per specification & drawing. |
| 56 | S&F of factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. |
| 57 | S&F of 125 mm long aluminium anodized cast type handle all as specified and directed. |
| 58 | S&F of 150 mm long brass extruded handles fabricated type polished all as specified and directed. |
| 59 | S&F of 100mm butt hinges, type B-21, extruded aluminium alloy with galvanised mild steel hinge pin, anodised & fixed to PVC door complete all as specified and as directed. |
| 60 | S&F in repair, vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or eracting stand & waste pipe, coupling etc with pedestal complete all as specified and directed. |
| 61 | S&F of 32mm waste coupling of PTMT (half or full threaded) (minimum weight 40mm-60 gms) with PVC waste pipe for wash hand basin fixed in repair complete all as specified and as directed. |
| 62 | S&F of 600mmx450mm Bevelled edge mirror of selected qulaity glass, mounted on 6mm thick AC building board or commrcial plywood and fixed to wooden plugs with chromium plated brass screws and cup washters etc. complete all as specified and directed by Engineer-in-Charge. |
| 63 | S&Fin repair, 15mm bore pillar taps, cast copper alloy with capstan heads chromium plated, fancy type, screwed down high pressure with or without lettered Hot or Cold with long screwed shank and fly nuts, complete all as specified and directed. |
| 64 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 65 | S&F of soap dish, stainless steel approximate size 160x160x90mm fixed to wall with chromium plated brass screws fixed in repair complete all as specified & as directed |
| 66 | S&F in repair, sheet glass shelf PTMT assembly consisting of 5.5mm thick sheet glass shelf 12cm wide fixedwith includingchromium plated screw, bracket guard and railing 60cm long complete all as specified and directed. |
| 67 | S&F of tubular towel rail brass chromium plated, D type, 60cm long between flange complete all as specified and directed. |
| 68 | S&F in repair, 15mm bore bibtaps, cast copper alloy with crutch , chromium plated, fancy type, screwed down, screwed for iron pipe and fixed, complete all as specified and directed by the Engineer-in-Charge. |
| 69 | S&F in repair, 15mm bore Stop Valve/angle valve , cast copper alloy with crutch , chromium plated,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or fpr unions and fixed, complete all as specified and directed |
| 70 | S&F of floor grating 100mm dia of PTMT.(Minimum weight 25gms) complete all as specified and directed. |
| 71 | S&F of PVC connection 15mm size with PTMT nuts of length 450mm Complete all as specified and directed. |
| 72 | M&L for cutting existing 40 or 50mm steel tubing for alterations or additions and screwing existing steel tubing for alterations or additions(lengthening screw on pipe to form connector) if necessary done in position without taking down complete all as specified. |
| 73 | Taking up or down, steel tubing 15mm bore and connections including cleaning for refixing and removal from sitecomplete all as specified and as directed. |
| 74 | S&F of 15mm bore galvanized steel water tubing, medium grade with all fittings fixed to wall, ceiling or laid in floors complete all as specified and directed. |
| 75 | S&F of 20mm bore galvanized steel water tubing, medium grade with all fittings fixed to wall, ceiling or laid in floorscomplete all as specified and directed. |
| 76 | S&F in repair vitreous china wash down water closet \"Orissa pattern, size, 580x440mm white, with integral foot rest (excluding flushing cistern and flush pipe) but including provision of cement concrete bedding. complete all as specified and directed . |
| 77 | S&F of low level flushing system PVC valveless syphonic action type, 10 ltrs capacity including supply pipe & fixing brackets of MS angle of size (25mmx25mmx3mm), 30 cm long in PCC (1:2:4) type B-1, block of size (10cmx10cmx10cm) on walls etc. Complete all as specified and directed . |
| 78 | Demolition and breaking up 150 mm dia, drain pipes Salt glazed ware, AC or reinforced concrete set in cement mortar complete all as specified & directed. |
| 79 | M&L for RCC NP2 pipe 150mm dia bore and jointed complete with collars as in culvert complete all as specified and directed. |
| 80 | M&L for cement concrete ( 1:3:6,type C2) bed to drain pipes of 150mm bore dia including packing under and haunching against the sides of pipes after they are laid and tested all as specified and directed. |
| 81 | Excavation in trenches, n.exc 1.5 mtr wide& n.exc1.5 mtr depth for foundation, etc, or for shafts, wells, casspits, manholes, pierholes etc. n. exc 10 sqm on plan & n. exc 1.50m in depth and getting out in soft and loose soil complete all as specified & directed. |
| 82 | Returning, filling in, including spreading, leveling, watering and well ramming the approved soil/earth in layers n. exc 25 cm thickin any type of soil complete all as specified and directed. |
| 83 | M&L for removing excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified & directed. |
| 84 | M&L for providing pre-cast cement concrete 1:2:4 typeB-1 (using 20 mm graded stone aggregates) as in cover slab formanholes, septic tank, soak well etc set in cement mortar 1:4 with plain fair faces including chamfered, weathering, throating etc including necessary use and waste of form work complete all as specified and as directed. |
| 85 | M&L for cutting into existing manholes for connecting new drains, of any dia making good to pipe and rendering , cutting out existing benching for and forming branch channel (1/2 round or ¾ section) in cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregates) finished smooth and reforming benching as required for 150 mm dia SGSW pipe complete all as specified and directed. |
| 86 | M&L for cast Iron floor trap 75mm, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 87 | S&F of PVC (SWR ) trap 110mm, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 88 | S&F of20 mm dia curtain rod of mild steel with decorative finish , with fixing brackets complete all as specified and as directed (two brackets per opening of door and window and 08 Nos PVC rings) complete all as specified and directed by Engineer-In-Charge. |
| 89 | S&F of rotational moulded polyethylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified including 20mm dia ball brass valve, complete all as specified and directed by Engineer-In-Charge. |
| 90 | S&F in repair gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed to steel pipe orunion, 20mm bore dia of pipe complete all as specified and directed by Engineer-In-Charge. |
| 91 | S&F of 110 mm bore PVC(SWR) pipes single sockets in any length with rubber ring joints laidin trenches or in floors complete all as specified and directed. |
| 92 | S&F of 110 mm bore PVC(SWR) bend any radius complete all as specified and directed. |
| 93 | S&F of 110mm PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. |
| 94 | S&F of 110mm bore PVC (SWR) junction single, (Single T) equal or unequal omplete all as specified and directed. |
| 95 | Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft / loose soil all as specified and as directed. |
| 96 | Removing excavated materials n.exc; 50m and depositing where directed at a level n.exc; 1.5m above the starting point in soil all as specified and directed. |
| 97 | M&L for cement concrete 1:4:8 type D2(Using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified. |
| 98 | S&F of PVC rain water pipes (SWR) 110mm dia(Single socketed, in any length with rubber joints, fixed to walls with flat iron clamps complete all as specified and directed. |
| 99 | M&Lfor hardcore of broken bricks gauge n.exc; 63 mm, deposited, spread and levelled in layers n.exc; 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 100 | M&Lfor plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate)in sub base of floor and pavings complete all as specified and directed. |
| 101 | M&Lfor plain cement concrete 1:2:4 (using 40mm graded stone aggregate)in sub base of floor and pavings complete all as specified and directed. |
| 102 | S&F of steel window 1.25mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm, 1.25 thick sheet single rebated comprises glazed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:2:4) type B-1 Four Nos for each window including following fitting welded to frame shutter : (a) Hold fast, 150mm long of 12mm square bar made to shape-04 Nos per window (b) Handles ofz section 100mm long (c) Stopper - 01 No per leaf (d)Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges - 01 No per leaf (e) MS Pintal hinges of size 75mm x 75mm x 12mm-02 Nos per leaf (f)Fabrication & fixing arrangement as per drg No CEJZ/TD-7/07 sheet 1/3 to 3/3.Note : Glass and painting shall be measured and paid separately under appropriate item etc. Complete all as specified and directed by Engineer-In-Charge. |
| 103 | M&L for framed work as in post, doors or gates and chowkhats of angle or other section with gusset plates, rails, braces, perline, truss etc, complete, drilled for fixing of steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening conforming to GdeFe 290(Gde E-165) complete all as specified and directed by Engr-in-Charge. |
| 104 | S&F of 3mm thick plain acrylic sheet, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane, complete all as specified and directed. |
| 105 | S&F of butt hinges 125mm size, medium weight, cold rolled mild steel, and fixed, complete all as specified and directed. |
| 106 | M&L for reinforced cement concrete M-25 design mix(using 20mm graded aggregates) in beams, cantilevers, lintel over 1.5m span etc; complete all as specified and directed. |
| 107 | Taking down carefully aluminium / copper point wiring (light, fan, socket, powerpoint) including batten, conduit and fittings such as switches, ceiling rose, sockets, brackets, light fittings, switch board etc, making good distrubed surfaces of wall, floar, ceiling etc complete all as specified and directed. |
| 108 | M&L for point wiring for one light / fan / bell point with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor ( FRLS ) 1100 Volts grade cable ( red colour cable to be used for live connection and black colour cable to be used for neutral connection ) controlled by one way switch drown through and including PVC concealed conduit with all accessories including 1.5 sqmm copper multistrand conductor (FRLS ) 1100 Volts grade unsheathed PVC insulated ( green colour ) continuity earth wire connected to common earth dolly and sunk cast pressed steel Metal flush mounting box for mounting of fittings like switch , socket and fan regulator and cover plat of suitable modules capacity and make of swich socket complete all as specified and as directed. |
| 109 | One light point controlled by one, one way switch |
| 110 | One fan point controlled by one, one way switch |
| 111 | One socket outlet 3 Pin, 5 Amp on independent board |
| 112 | One socket outlet 3 Pin, 5 Amp on same board. |
| 113 | - ditto - all as per item No. 108 above here in before but 2.5 Sqmm P.V.C insulated unsheathed cable with stranded copper conductor for 6 pin 6/16 Amp switch socket combination on independent board. |
| 114 | S&F of switch piano flush type single pole one way 6 Amp (ISI Marked) |
| 115 | S&F of switch piano flush type single pole one way 15 Amp (ISI Marked) |
| 116 | S&F of socket out let 2 in 1, 3 pin 5 Ampflush type (ISI Marked) |
| 117 | S&F of socket out let 2 in 1, 3 pin 15 Amp flush type (ISI Marked ) |
| 118 | M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body (ISI Marked) |
| 119 | Taking down old unserviceable regulator & supply & fix electronic type fan regulator stepped type on existing phenolic laminated sheet etc. suitable for ceiling fan. |
| 120 | S&F in repairPVC/Polycarbonate Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings type with back plate suitable for batten fittingscomplete all as specified and as directed. Make: Anchor/ Legrand/ Havells |
| 121 | Supply, installation, testing and commissioning of 20 watt 4 ft long LED Batten housing made of extruded alluminium with milky white diffuser and inbuilt electronic driver system lumen output should be at least 1800 lumen with a CCT of 6000 K, power factor should be greater than 0.9 with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 all as specified and directed. |
| 122 | Taking down old US MCB DB and S & F in Repair sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with 200 Amps rated bus bar all as specified and directed by Engineer-in-Charge. |
| 123 | Taking down old unsv MCB and Supply and fixingSP 6 To 32 AMP amp rating 240V, 10KA \"C\" curve miniature circuit breaker(MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. complete all as specified. |
| 124 | - ditto - all as per item No. 119 above here but SPN 32 AMPcomplete with connection testing and commissioning. complete all as specified. |
| 125 | S&F of ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor all as specified and directed. |
| 126 | S&F of exhaust fan, made of sturdy engineering plastic AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers cutting of the holes in existing wall and making good the surfaces all as directed. |
| 127 | S&F in repair LED Security light fitting 35 watt pressure die cast aluminium housing, heat resistant toughened glass with frame IP 66 Protection complete fitting including1.5 mtr long 40/50 mm (Suitable size for fixing of LED light fitting) bore GI pipe mounting bracket/Clamp made to shape for fixing on pole with 40 mm x 6 mm flat iron clamp 02 numbers with 16 mm dia bolts, nuts and washersall as specified and directed by Engineer-in-Charge. Note : Contractor shall provide 1 years written manufactures warranty for the LED fixture complete including driver from the certified date of completion. |
| 128 | M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as directed. |
| 129 | Supplying, laying, jointing and testing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 vols grade cross sectional area 16 Sqmm 2 core laid in trences, in floor, in duct, through pipes or along the pole including taking down old one complete all as specified and directed. |
| 130 | M&L for sand cushioning to under ground cable with a layer of sand 8 cm thick before laying of cable and 15 cm thick after laying of cable complete all as specified and directed. |
| 131 | M&L for brick protection using old size sub class ‘B’bricks, laid flat, dry adjacent to each otherlaid length wiseperpendicular to theaxis of cable complete all as specified and directed. |
| 132 | S&F of fire alarm control panel complying with BS EN 54 two loop panel of capacity from 99 detectors & 99 each modules upto 200 detector complete all as specified and directed. |
| 133 | S&F of addressable sounder complete all as specified and directed. |
| 134 | Supply, Installation, testing and commissioning of automatic floating sensitivity type alanog addressable acclimate photo thermal smoke and heat multisensor detector with mounting base LED, address switch from 01-159, to programme the detectors, complete as required (in changing environment area. |
| 135 | Supply, installation, testing and commissioning of conventional resettble manual call point, break glass type with alarm each LED Complete. |
| 136 | S&F of response Indicator unit complete all as specified and as directed. |
| 137 | Supply, installing, testing and commissioning of 2C x 1.5 sq. mm, PVC insulated FRLS Armoured copper cable for SLC RM Loop & Power Supply, confirming to IS standards and specifications complete as required as per technical specification. |
| 138 | Supply, installation, testing and commissioning of sirens electronic type horizontal single stage continous normal Each operation for 50 min with sound level 65db to 120db measured at 1.5 mtr with sound output variation of +5db, for 500 mtr range complete all specified and as required at site.For each block i.e or DUS x 01 No = 01 No |
| 139 | M&L for point wiring for one light point controlled by one switch with copper conductor cable FRLS cable 1100V grade single core confirming IS 694 (1990) PVC insulated and unsheathed multi standard FRLS copperconductor 2.5 Sqmm as wiring andearth continuity conductor 2.5 Sqmm PVC insulatedconnecting to common earthdrawn in & incl concealed in stove enamelled steel conduit mediumgrade ISI marked not less than 20 mm dia with all fittings and accessories including connecting with existing/new switch/DBs or any other accessories complete all as per requirement at site complete all as specified and as directed by Engr-in-Charge.Note: Switch/socket/Luminare/fittings/fixture will be measured and paid seperately. |
| 140 | One light point controlled by one, one way switch |
| 141 | Supply and fixing in replacement junction box 100 mm dia two way flame proof complete all as specified and directed by Engineer-in-Charge.Make : Havells/Sudhir/Crompton or equivalent as mentioned in List of makes in Appx B-1. |
| 142 | Supply and fix in replacement Switch flame proof rotary type with termination box in LM6, 10A, single pole 250V complete all as specified and directed by Engineer-in-Charge.Make : Havells/Sudhir/Crompton or equivalent as mentioned in List of makes in Appx B-1. |
| 143 | Supply and fix in replacement Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P+earth complete all as specified and directed by Engineer-in-Charge.Make : Havells/Sudhir/Crompton or equivalent as mentioned in List of makes in Appx B-1. |
| 144 | Supply and fixing LED light fitting 2x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge.Make : Havells/Sudhir/Crompton or equivalent as mentioned in List of makes in Appx B-1. |
| 145 | Supply and Fixing of Flameproof cum Waterproof LED Bulk Head light fitting of 40 W, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen \"A\" clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge.Make : Havells/Sudhir/Crompton or equivalent as mentioned in List of makes in Appx B-1. |
| 146 | S&F Flameproof & weather proof, steel body Exhaust Fan of size 300 mm complete all as specified and directed. |
| 147 | S&F Flameproof & weather proof 4 way SPN Distribution board/ lighting distribution panel with following fittings & fixtures complete all as specified and directed :-(a) Incoming : MCB 2 Pole, 25 Amp - 01 No(b) Outgoing : MCB 1 Pole, 10 Amp - 03 Nos |
| 148 | Supply and fixing air termination signle pointed aluminium rod 12 mm dia. And 300 mm long and secured to aluminium flanges grouted in floor. Roof etc. and connected to roof conductor with calmps all as specified. |
| 149 | S&F of GI pipe light garde 40mm dia for installing air termination rod including fixing arrangment of elctrode. |
| 150 | PCC Type B1-1:2 4 20mm graded for foundation blok for mounting air termination pipe |
| 151 | Supply and fixing aluminium strip 25 x 3.15 mm size fixed on suitable grooved porcelain insulators 60 cms RM apart with copper saddles/clamps fixed in roof/wall as roof down conductors all shown on drawing and specified in IS 2309 of 1969 including all fixed material. |
| 152 | M&L for inspection joint between down conductor and earth conductor using 75 mm x 75 mm x 25 mm each size made out of gun metal or phosphor bronze of aluminium 100 mm in length between Gl and aluminium strips (Bitmetallic Connection) connected togerther with 2 Nos of G.I. bolts, nuts washer of 6 mm dia and the joint housed inside inspection box of size 150mm x 120mm fabricated with 3 mm thick G.I. sheet with fixed back side on suitable G.I. bolts and nuts ground on wall the front side is removable inspection/testing complete all as specified. |
| 153 | Supplying and fixing copper strip 32 x 6 mm on wall and burried in ground as earth conductor. |
| 154 | Earthing complete with galvanised steel earth plate electrode 60×60cm.x 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion |
| 155 | Supplying, laying, jointing and testing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 vols grade cross sectional area 25 Sqmm 2 core laid in trences, in floor, in duct, through pipes or along the pole including taking down old one complete all as specified and directed by Engr-in-Charge. |
