|
| 1 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.G.I. pipes |
| 2 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.16.70.1 Made of G.I. wire of dia 4 mm |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.2.6.1 All kinds of soil |
| 4 | Providing and Laying in position Cement Concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level 4.1.3 1:2:4 (1 Cement : 2 Coarse sand (zone-III) : 4 Graded Stone aggregate 20 mm nominal size |
| 5 | Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bilingual), symbols and borders etc. as per IRC ; 67:2001, pasted onsubstrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge.16.59.1 Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm |
| 6 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.18.9.5 40 mm nominal dia Pipes |
| 7 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :18.17.3 40 mm nominal bore |
| 8 | Supply of Agro Shade Net with density 50%, dimension 3 mtr width 50 mtr length colour green and black as per direction of officer in charge. |
| 9 | Supply of Decomposing bacterial culture for composting in good quality. |
| 10 | Supply of 1” PVC pipe with nylone braided in good quality as per direction of officer-in-charge. |
| 11 | Supply of safety glass (Chashma) in good quality |
| 12 | Supply of Safety Boots Standard: IS 12254 should be ideal for working in forest are and sole make in polyvinyl chloride, resistant to mild acid/alkaline (Pair) |
| 13 | Supply of Hand Gloves: Puc dotted gloves seamless polyester cotton. (Pair) |
| 14 | Spply of Safety Helmet Standard: IS 2925 CN 397 light weight polyethylene HDPE ABS Made. |
