|
| 1 | Item no 1 :-Trimming of grass, shurbs and weeds from the shoulders/berms and disposing off the same to suitable locations etc. complete |
| 2 | Item no 2:- Metal Beam Crash Barrier--Type-A,W:Metal Beam Crash Barrier (Providing and erecting a W metal beam crash barrier comprising of 3mm thick corrugated sheet metal beam rail,70cm above road/ground level,fixed on ISMC series channel vertical post,150 x75x5mm spaced 2m centre to centre,1.8m high,1.1m below ground/road level,all steel parts and fitments to be galvanised by hot dip process, all fittings tocon form to IS:1367andIS:1364,metal beam rail tobe fixedon the vertical post with aspacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810)\"\" |
| 3 | Item No. 3 :- Providing Vertical Delineator having wide angle cube corner micro prismatic non metallicreflective sheeting confirming to Type XI of ASTMD4956-09 with White Color and Red Colorcombination and having minimum of retroreflective exposed area of 125 Sq CM on top slots and 35SqCM on bottom slots and no edges shall bee xposed for tampering.This tubulardelineator shall have a core and shell construction, shell shall be made of tough, high impact resistant, injection-molded, thermoplastic outer body and the inner core shallconsist of powder coated or painted Mildsteel of minimum thickness1.0mm.andcore shell structure shall be of height not less than 800mm above the ground and width not lessthan80mm.Themetallic core of the delineator shall extend300mmbeyond the shell length from bottom for installing in the ground.The extended portion shall have slots toinsert anchoring rods for enhancing the concrete grip.The logo of the manufacturer shall beem bosse done it her side of the body in the in jection molding process.The engineeringthermoplastic used formaking the delineator body shall have minimum in itial mechanical properties of 600J/mt estedin accordance with ASTMD 256 and shall retain at least70% of the seminimuminitial values when subjected to accelerated weathering for 1000hrs as per ASTMG155 or UL746C and as per IRC79 specification s and including fixing theunit in M20 Grade Cement Concrete of Size 30x30x40 cm including excavation for pit. |
| 4 | Item No. 4 :- Supplying and Fixing of Molded Shank Raised Pavement Markers /Cat\"s Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lenscapable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTMD 4280 Type Handcomplying to Specifications of Category A of MORTH Circular NoRW/NH/33023/10-97 DOIII Dt 11.06.1997. The height, width and length shall not exceed 50mm,100mmand102+/-2mm and with minimum reflective area of 13Sq cm on each side and the slope to the base shall be35+/-5degree.The strength of detachment of the integrated cylindrical shanks,(of dia meter not less than19+/-2mm and height not less than30+/-2mm) from the body is to be minimum value of 500Kg.Fixing will be by drilling hole son the road for the shanks to go inside,without nails and using epoxy resin based adhesive as permanufacturer\"s recommendation and complete as directed by the engineer.The contractor shall submit a two year warranty for satisfactory field erformance including stipulated retro-reflectance of the reflecting panel, to the Engineer. |
| 5 | Item No. 5 :- Providing and fixing Mandatory/Regulatory signboards in circular shape of______mm dia made out of____mm aluminum sheet bonded with white retroreflective sheeting of ClassB (TypeIVHigh intensity micro-prismatic grade sheeting-HIP)having pressure sensitive/heatactivated adhesive eretoreflective specified background, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 TableNo8.3 Supported with back support frame25mmx25mmx3mm, duly painted on back side with grey stove enamel paint and supported on one no.of M.S.angle iron post of size 65mmX65mmX6mm,3.45mlong, duly painted with with flat oil paint having alternate black and white bands of25cm width including G.I. fixtures etc; fixing the boards inM25grade concrete block of size60cm X 60cm X75cm including transportation etc; complete.Class (Type IV High intensity micro-rismatic grade sheeting-HIP)shall have7years written warranty from the manufacturer and authorised distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. 600 mm diamade out of 1.5mm aluminum sheet |
| 6 | Item No. 6 :-B Providing and fixing Cautionary / Warning sign boards in Equilateral Triangle size of__mm made out of___mm aluminum sheet bonded with white retroreflective sheeting of ClassB (Type IV High intensity micro-prismatic grade sheeting-HIP)having pressure sensitive/ heatactivated adhesivere to reflective specified background,border and backside reto reflective symbols, letters, numerals, arrow asper IRC:67-2012 Table No8.3 Supported with back support frame 25mmx25mmx3mm, duly painted on back side with grey stovee name paint and supported on one no.of M.S.angle iron post of size 65mmX65mmX6mm,3.45mlong, duly painted with flat oil paint having alternate black and white bands of25cm width including G.I. fixtures etc; fixing the boards in M25 grade concrete block of size 60cmX60cmX75cm including transportation etc;complete.ClassB(TypeIVHigh intensity micro-prismatic grade sheeting HIP) shall have 7years written warranty from the manufacturer and authorised distributor/ convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. 600 mmmade out of 1.5mm aluminum sheet |
| 7 | Item No.7: Excavation for catch / side water gutter in all sorts of soils & in hard murum and boulder strata to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils as directed by Engineer in charge etc., complete. |
| 8 | Item no 08-Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/ colour of 2.5mm thick including 1.5 Refractive index reflectorizingglass beads @250gm/sqm.Thickness of 2.5mm is exclusive of surface applied glass beads as per IRC35:2015. Initial Dry reflectivity RL shall be >250mcd/ sqm/ lux measured in the initial 7days and sustained reflectivity RL of 100mcd/sqm/lux and Qd of 100mcd/sqm/lux measured at the end of 2years by means of a Standard Reflectometer of Zehntner, Easylux, Deltamake capable of measuring RL&QD both according to IRC35:2015clause15.5.The finished surface to be level,uniform,and free from streaks and holes complete as per direction of Engineer-in-charge and in accordance with applicable specifications.(Refer MORTH Clause 803 for technical Specification and Performance for IRC 35:2015). |
| 9 | Item no 09-Providing earthwork in embankment with approved materials obtained from other sources upto lead of 50m. including all lifts, layinginlayersof20cm. to30cm. thick ness breaking clods,dressing to the required lines, curves,grades §ion, watering and compaction with vibratory roller withV-Sat attachment to achieve not less than97%of standard proctor density etc. complete( Material obtained from Other sources) |
