|
| 1 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 2 | 3 x 1.5 sq. mm |
| 3 | 3 x 2.5 sq. mm |
| 4 | 3 x 4 sq. mm |
| 5 | 6 x 6 sq. mm |
| 6 | 6 x 10 sq.mm. |
| 7 | Supply and fixing of 32 x 20 mm DLP mini- trunkingwhite-system with independent coveretc. as required complete. |
| 8 | Supply and fixing of following accessories suitable for 32 mm x 20 mm sizeplastic trunking white system. |
| 9 | End cap |
| 10 | Internal / external angle |
| 11 | Changeable flat angle |
| 12 | Flat junction |
| 13 | Supply and fixing of 105 x 50 mm DLPtrunkingwhite-system but without cover and partition etc. as required complete. |
| 14 | Supply and fixing of following accessories suitable for 105 mm x 50 mm sizeplastic trunking white system. |
| 15 | 85 mm flexible cover |
| 16 | End cap |
| 17 | Flat junction |
| 18 | Separation partitions |
| 19 | Supply and fixing of following LED light fixture with efficiency >100 lumen/ watt, P.F. >0.95, THD<10%,Electronic driver,LED lamp, reflector, diffuser, MS body/housing holder etc. complete with all fixing accessories and lamp as required complete. |
| 20 | 1 X 20W Box type LED tube with fitting |
| 21 | Supplying and fixing following rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 22 | Triple pole and neutral 5 A to 32 A |
| 23 | Triple pole (40A-63A) |
| 24 | Four Pole (40A-63A) |
| 25 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 26 | 5/6 A switch |
| 27 | 15/16 A switch |
| 28 | 6 pin 15/16 A socket outlet |
| 29 | Blanking Plate |
| 30 | Supplying and fixing following size/ modules, plastic boxfor modular switches in recess etc as required. |
| 31 | 1 or 2 Module |
| 32 | 3 Module |
| 33 | Supplying, installation of Clip-on frame with finishing plate for 85mm cover for DLP plastic trunking 105mm x 50mmetc. as reqd. |
| 34 | 3 module |
| 35 | 6 module |
| 36 | Supplying and fixing following modular switch/ socket on the existing clip-on frame fixed on 85mm cover of 105 x 50 mm DLP plastic trunking including connections etc. as required complete. |
| 37 | 6 A switch |
| 38 | 20 A switch |
| 39 | 6 A pin 2/3 pin socket outlet |
| 40 | 6/16 A 3 pin socket outlet |
| 41 | Laying of 1/2/3 run ofUTP cable enhanced cat 5/cat 6 cable in existing steel conduit pipe/GI pipe/ raceway / RCC pipe as reqd. the cost shall also include numbering of networking wire from room to rack as reqd. (wire will be supplied by dept) |
| 42 | Fixing of RJ-45 modular box with cover plate or I/o box for interneton surface/ recessed cutting the wall making good the same as required. ( box and cover plate will be supplied by dept.) |
| 43 | S&F, Copper tube / reducer/ lugterminals suitable for following size of conductor. |
| 44 | 6 /10/16 Sq.mm. |
| 45 | S & F metal enclosure suitable for DP/TPNMCB / DP ELCB on surface or recessed etc as reqd. |
| 46 | S & F following size of steel flexible pipe along with the accessories on surface etc as required |
| 47 | 20 mm |
| 48 | 25 mm |
| 49 | 32 mm |
| 50 | Dismantling and refixing of pole fuse box/ changeover switch/ main switch/ contactor/MCCB/ DB kWH meter etc. as required complete. |
| 51 | Supply & Laying of40 mm dia, 8Kg / cm², minimum 2.0 mm thick HDPE pipe, ISI mark in following manners as required complete. |
| 52 | In open duct |