Tender For Repair And Renovation Of Panchayat Market At Panchawati Junction Under Gram Panchayat Shivapuram, North And Middle Andaman-Andaman And Nicobar Islands

TDR : 53867098

Tender Notice
BOQ

Expired

North And Middle Andaman , Andaman And Nicobar Islands

Tender Brief : Tender For Repair And Renovation Of Panchayat Market At Panchawati Junction Under Gram Panchayat Shivapuram

Document Fees
₹ 500 /-

EMD
₹ 13559.0 /-

Tender Value
₹ 6.77 Lakhs /-

Submission Date
13-02-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
2	1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources).
3	1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources).
4	Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
5	G.I. pipes
6	Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
7	Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
8	Providing and fixing bolts including nuts and washers complete.
9	Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
10	Extra for providing and fixing wind ties of 40x 6 mm flat iron section.
11	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
12	Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
13	Ridges plain (500 - 600mm)
14	Gutter (600 mm over all girth)
15	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
16	One or more coats on old work
17	Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :
18	One or more coats on old work
19	Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:
20	One or more coats on old work
21	Finishing walls with Acrylic Smooth exterior paint of required shade :
22	Old work (One or more coat applied @ 0.90 ltr/10 sqm).
23	Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.
24	With cement mortar 1:4 (1 cement : 4 fine sand)
25	Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
26	Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
27	Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in:
28	Channels, angles, tees and flats
29	Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:
30	G.S. Sheet
31	ELECTRICAL WORKS
32	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC Conduit, with piano type switch, suitable size PVC box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
33	Group C
34	Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC Conduit, alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
35	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC Conduit as required
36	2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
37	2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
38	2 X 6 sq. mm + 1 X 6 sq. mm earth wire
39	Supplying and fixingSuitable PVC boxon surface or in recess, including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required.Make anchor/Polycab/Havells.
40	Supplying and fixing Suitable PVC box on surface or in recess, including providing and fixing 6 pin5/6 & 15/16amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.Make anchor/Polycab/Havells.
41	Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required
42	Supplying of prewired LED tube light 20W LUMEN output 2000lm 6500K Product code PANASONIC PBTM02203 or equivalent to ISI standard.(Havells/Panasonic/Polycab) or Equivalent to ISI Standarad.
43	Installation, testing and commissioning of pre-wired, LED FITINGof all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
44	Supplying of A.C. Ceiling fan(600mm sweep) with all accessories required. (Make: Bajaj/ Usha/ Orient/Crompton or equivalent to ISI standard). (5 star).
45	Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plateetc. as required.
46	Installation, testing and commissioning of ceiling fan, including down rods of standard length(upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
47	Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB /RCCB /Isolator)
48	4 way, Double door
49	Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
50	Single Pole
51	Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
52	40 Amps, 2 Pole Isolator
53	Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
54	Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.
55	Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthingas required.
56	Supplying and fixing rewirable porceline with fuse unit of 32 to 40 amps on energy meter board.
57	Supplying and fixing of Wooden meter board of Size 10\" X 12\" for fixing of Energy meter or equivalent to ISI standarad.
58	Supplying and fixing brass batten/ angle holder including connection etc. as required.
59	Supplying ofLED Lamp 9W (MAKE : WIPRO TEJAS 9W ) (Make: Bajaj/ Havells /Usha /Orient/Crompton or equivalent to ISI standard)

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Andaman And Nicobar Islands Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repair And Renovation Of Panchayat Market At Panchawati Junction Under Gram Panchayat Shivapuram, North And Middle Andaman-Andaman And Nicobar Islands

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
2	1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources).
3	1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources: 6 graded stone aggregate 20 mm nominal size derived from natural sources).
4	Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
5	G.I. pipes
6	Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
7	Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
8	Providing and fixing bolts including nuts and washers complete.
9	Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
10	Extra for providing and fixing wind ties of 40x 6 mm flat iron section.
11	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
12	Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
13	Ridges plain (500 - 600mm)
14	Gutter (600 mm over all girth)
15	Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :
16	One or more coats on old work
17	Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :
18	One or more coats on old work
19	Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:
20	One or more coats on old work
21	Finishing walls with Acrylic Smooth exterior paint of required shade :
22	Old work (One or more coat applied @ 0.90 ltr/10 sqm).
23	Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.
24	With cement mortar 1:4 (1 cement : 4 fine sand)
25	Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
26	Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
27	Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in:
28	Channels, angles, tees and flats
29	Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:
30	G.S. Sheet
31	ELECTRICAL WORKS
32	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC Conduit, with piano type switch, suitable size PVC box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
33	Group C
34	Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC Conduit, alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
35	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC Conduit as required
36	2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
37	2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
38	2 X 6 sq. mm + 1 X 6 sq. mm earth wire
39	Supplying and fixingSuitable PVC boxon surface or in recess, including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required.Make anchor/Polycab/Havells.
40	Supplying and fixing Suitable PVC box on surface or in recess, including providing and fixing 6 pin5/6 & 15/16amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.Make anchor/Polycab/Havells.
41	Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required
42	Supplying of prewired LED tube light 20W LUMEN output 2000lm 6500K Product code PANASONIC PBTM02203 or equivalent to ISI standard.(Havells/Panasonic/Polycab) or Equivalent to ISI Standarad.
43	Installation, testing and commissioning of pre-wired, LED FITINGof all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.
44	Supplying of A.C. Ceiling fan(600mm sweep) with all accessories required. (Make: Bajaj/ Usha/ Orient/Crompton or equivalent to ISI standard). (5 star).
45	Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plateetc. as required.
46	Installation, testing and commissioning of ceiling fan, including down rods of standard length(upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
47	Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB /RCCB /Isolator)
48	4 way, Double door
49	Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
50	Single Pole
51	Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.
52	40 Amps, 2 Pole Isolator
53	Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
54	Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.
55	Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthingas required.
56	Supplying and fixing rewirable porceline with fuse unit of 32 to 40 amps on energy meter board.
57	Supplying and fixing of Wooden meter board of Size 10\" X 12\" for fixing of Energy meter or equivalent to ISI standarad.
58	Supplying and fixing brass batten/ angle holder including connection etc. as required.
59	Supplying ofLED Lamp 9W (MAKE : WIPRO TEJAS 9W ) (Make: Bajaj/ Havells /Usha /Orient/Crompton or equivalent to ISI standard)

Tender For Repair And Renovation Of Panchayat Market At Panchawati Junction Under Gram Panchayat Shivapuram, North And Middle Andaman-Andaman And Nicobar Islands

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us