|
| 1 | B/R Portion:- Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 2 | 5mm thick cement plaster rendering in CM 1:3 on fair faces of concrete surfaces & finishing the surface even and smoothin ceiling, chajja in doublestorey building etc without using extra cement,complete all as specified and directed. |
| 3 | 15mm thick rendering in CM 1:4 on fair faces ofbrick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed. |
| 4 | 15mm thick rendering in CM 1:6 on fair faces ofbrick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed. |
| 5 | Preparation of new plastered surface of Wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ .90 ltr/10 sqm over new surfaces in painting on walls in camouflage pattern with combination of minimum five colours as approved by GE complete all as specified and as directed. |
| 6 | Complete removal of existing treatment on wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ .90 ltr/10 sqm over new surfaces in painting on walls in camouflage pattern with combination of minimum five colours as approved by GE complete all as specified and as directed. |
| 7 | Preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil emulsion distemper complete all as specified and directed |
| 8 | Complete removal of existing treatment and preparing of plastered or unplastered surfaces of walls and applying two coats of oil emulsion distempercomplete all as specified and directed |
| 9 | Preparation of newly plastered surfaces and applying three coats of white wash on ceiling sufraces complete all as specified and directed. |
| 10 | Preparation of old plastered surfaces and applying two coats of white wash on ceiling sufraces complete all as specified and directed. |
| 11 | Preparation of new or previously untreated surfaces of wood or wood based surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 12 | Preparation of new or previously untreated steel or iron surfaces not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 13 | Preparation of old painted steel or iron surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 14 | Demolition of brick work, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. |
| 15 | Brickwork with sub class ‘B’ bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed |
| 16 | Demolition of cement concrete (unreinforced) as in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and as directed. |
| 17 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 18 | Demolition of stone slab and tiles of any description and thickness in floors, aprons etc laid and pointed in any mortar, complete all as specified and directed. |
| 19 | Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11Sqm but n exc. 0.18Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 20 | Glazed ceramic coloured tiles 300x200mm /450mmx350mm x7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick back coat layer in cement mortar 1:3, complete all as specified and directed by Engr-In-Charge. |
| 21 | 25 mm thick PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in levelling course to floor surface, finishing surface even and fair, complete all as specified. |
| 22 | 75 mm thick cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in floors, hard standing etc and laid in alternate bays complete and finished the even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of 01 bitumen 85/25 grade and three part of sand by weight all as specified and directed |
| 23 | Machine cut pre polished kota stone slab flooring 18- 20 mm thick as in floor with & including white marble border of 150mm wide, 18-20mm thick laid over & including 20mm thick screed bed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 24 | Machine cut pre polished Kota stone 18-20mm thick as in riser of steps, skirting, dado and pillar, fixed over & including cement plaster 15mm thick in CM 1:3 and jointed with grey cement slurry mixed with pigment tomatch the shade of the kota stone including rubbing and polishing complete all as specified and directed. |
| 25 | Floor grinding and polishing granite finish to existing kota stone floors including necessary repairs if reqd after each cuttinng i.e filling of joints with white cement, araldite and pigments complete all as specified and directed by GE. |
| 26 | Floor grinding and polishing granite finish to existing kota stone in vertical surfaces including necessary repairs if reqd after each cuttinng i.e filling of joints with white cement, araldite and pigments complete all as specified and directed by GE. |
| 27 | Taking down chowkhats or framesexc 1.5 Sqm but n.exc 4 Sqm with shutters (without taking off shutters from frame)complete all as specified and directed |
| 28 | Taking down chowkats or frames n exc 1.50 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 29 | Taking down shutters of any description exc 2.0 sqm each complete all as specified and directed. |
| 30 | Factory made single extruded WPC (Wood Polymer Composite) solid door &other Frames / Chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitred joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete allas specified and directed.Note: 1.For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.2. M.S. hold fast/ lugs or SS dash fasteners shall be measured andpaid for separately). |
| 31 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite / borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 32 | 35mm thick 2nd class hard woodglazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated shash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR PART I section 8, clause 8.24 (a), kiln seasoned and chemically pressure treated , supplied & fitted to chowkats complete all as specified and directed. |
| 33 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 34 | Factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet, \"C\" channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed by Engineer-in-Charge. |
| 35 | Mild steel butt hinges, medium weight, cold rolled,100mm long, complete all as specified and directed. |
| 36 | Aluminium anodised, barrel tower bolts of extruded section of size 150mm and fixed, complete all as specified and directed. |
| 37 | Aluminium anodised, barrel tower bolts of extruded section of size 100mm and fixed, complete all as specified and directed. |
| 38 | Aluminium alloy handles, cast type, anodised of size 150mm and fixed, complete all as specified and directed. |
| 39 | Aluminium alloy handles, cast type, anodised of size 100mm and fixed, complete all as specified and directed. |
| 40 | 200 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 41 | 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 42 | Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed. |
| 43 | Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed. |
| 44 | Repairs to old steel windows/ventilator any size for easing to opening of shutters, fixing hinges,handle,tower bolt etc with welding inlcuding cleaning, including taking down and refixing in same opening and making good adjoining surface complete all as specified and directed. |
| 45 | Repairs to old panelled/wire gauzed shuttersfor ease to opening of shutters, fixing hinges,handle,tower bolt etc with screws includingtaking down and refixing in same opening complete all as specified and directed. |
| 46 | 3mm thick Sheet glass of ordinary quality,glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, complete all as specified and directed. |
| 47 | Supply and fixing in repairs 3mm thick Sheet glass of ordinary quality,glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, complete all as specified and directed. |
| 48 | Stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with aluminium wire staples or wooden beading complete allas specified and directed. |
| 49 | Supply and fixing in repair Stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with aluminium wire staples or wooden beading complete allas specified and directed. |
| 50 | Vitreous china squatting pan (Orissa pattern) size 580 x 440 mm, snow white, with \"P\" or \"s\" trap, front or back inlet and integral foot rests, complete connection to drain (outgoing pipe) and to flushing pipe and syphonage pipe etc. fixed in repairs including lime concrete bedding, complete, all as specified. |
| 51 | Vitreous china wash down water closet pan (pedestal pattern), white with seat cover including all fittings, fixing nut bolts, connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc fixed in repair,complete all as specified and directed. |
| 52 | Vitreous china bowl urinal flat back small- normal, size of 465X355X265mm white (minimum), with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 exclding flushing cistern,flush pipe and waste pipe, fixed in repair, complete all as specified and directed. |
| 53 | Supply and fixing in repair, Vitreous china wash basin, counter type oval shape size 550 x 400 mm excluding taps, waste,chain and plug and porcelain stopper but including brackets, waste pipe & CP waste coupling complete all as specified. |
| 54 | 15mm brass chromium plated basin mixerfor mixing hot & cold water screwed down for iron pipe, fixed in repair, complete all as specified and directed. |
| 55 | PVC valve less symphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets including 32mm dia PVC. flush pipe for low level cistern including all joints fixed in repair , complete all as specified and directed. |
| 56 | 15mm bore Stop valve/angle cock, cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, fixed in repairs, complete all as specified. |
| 57 | 15mm bore Stop cock cast copper alloy chromium plated fancy type with long shank and cup (concealed type) screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, fixed in repairs, complete all as specified. |
| 58 | 20mm dia Concussive push button taps of cast copper alloy, screwed for iron pipe and fixed for urinal complete all as specified and directed. |
| 59 | Bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed down, high presure with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule, fixed, complete all as specified and directed. |
| 60 | PVC connection 15mm size with CP nuts on both ends of length 600mm fixed in repairs, complete all as specified and directed. |
| 61 | Grating doom 100 mm dia with waste hole of steel fixed in repair, suitable for floor taps, all as specified and directed. |
| 62 | Supply and fixing in repair 600mm x 450mm size bevelled edge mirror with border, selected quality 5mm thick glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engineer-in-Charge. |
| 63 | Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed |
| 64 | Soap dish of CP fixed with and including chromium plated brass screws and wooden/plastic plugs, fixed in repairs, all as specified and directed. |
| 65 | Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 66 | Tubular towel rail 60cm long 20mm dia aluminium anodised incl necessary brackets, fixed in repair, complete all as specified and directed. |
| 67 | Dismantling of cast iron drain pipe of any dia set in cement mortar/concrete and taking out of trenches if required, complete all as specifie and directed. |
| 68 | PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement fixed in repair, complete all as specified. |
| 69 | PVC (SWR) pipes type \"B\" 75mm dia any length single socketed with rubber ring joint, laid in floor, fixed in repair, complete all as specified and directed. |
| 70 | PVC (SWR) pipes type \"B\" 75mm dia any length single socketed with rubber ring joint, laid in walls, fixed in repair, complete all as specified and directed. |
| 71 | PVC (SWR) pipes type \"B\"110mm dia any length single socketed with rubber ring joint, laid in floor, fixed in repair, complete all as specified and directed. |
| 72 | PVC (SWR) pipes type \"B\" 110mm dia any length single socketed with rubber ring joint, laid in walls, fixed in repair, complete all as specified and directed. |
| 73 | PVC (SWR) bends any radius 75mm bore fixed, complete all as specified and directed. |
| 74 | PVC (SWR) bends any radius 110mm bore fixed, complete all as specified and directed. |
| 75 | PVC(SWR) branch piece, single (single Y) equal or unequal 75mm bore fixed in repair, complete all as specified and directed. |
| 76 | PVC(SWR) branch piece, single (single Y) equal or unequal 110mm bore fixed in repair, complete all as specified and directed. |
| 77 | PVC (SWR) junction single (single T) 75mm bore equal or unequal, fixed in repairs, complete all as specified and directed. |
| 78 | PVC (SWR) junction single (single T) 110mm bore equal or unequal, fixed in repairs, complete all as specified and directed. |
| 79 | PVC (SWR) vent cowl for 75mm dia fixed in repair, all as specified. |
| 80 | Dismantling water tanks of any description exc 500 & nexc1000 litre capacityand removing from site complete all as specified and directed. |
| 81 | Rotational moulded polyethylene water storage tankstriple layer (Cylindrical vertical with closed top), ISI marked hoisted and fixed in position all as spd in SSR Pt-I,of capacity1000 Ltrs including making necessary connection and fittings, complete all as specified and as directed. |
| 82 | Ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule, 20mm bore fixed, complete all as specified and directed. |
| 83 | 20mm bore gun metal globe or gate valve (ISI marked) with iron wheel head,screwed both ends for iron pipe fixed in repair complete all as specified. |
| 84 | Supply onlly liquid water proofing compound of Dr. Fixit or equivalent make complete all as specified and directed. |
| 85 | Rendering 10mm thick in CM 1:3 on fair faces of brick work or concrete surfaces finished even and smooth and using liquid water proofing compound @ 3% or as per manufacturer instructions on sunken portion complete all as specified and directed(NOTE : Water proofing compound shall be measured and paid separately). |
| 86 | Applying a coat of blown type bitumen at the rate of 1.50 kg per square metre and binding with clean dry sand @ 0.05 cum per sqm surface and applying hot blown bitumen 85/25 on sunken portion complete all as specified and directed. |
| 87 | Polythene film,150 micron thick, laid on a coat of bitumen primer @ 0.30 to 0.50 kg per sqm complete all as specified and directed. |
| 88 | 50 mm dia HDPE pipes as spout pipes in sunken portion complete all as specified and directed |
| 89 | Loose filling ofbrick bats 80 to 150 mm in sunken portion complete all as specified and directed |
| 90 | Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 91 | Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 92 | 16mm dia 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 93 | 20mm dia 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified. |
| 94 | Steel water tubing of 25 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 95 | Taking down existing tarfelt including tiles including demolition of cement concrete & screed bed complete from roof surfaces including parapets and lowering without disturbing the existing RCC roof slab and removing the same to a distance exc. 50m and n. exc. 100m including roughening ofold concrete surface of roofby wire brushing and cleaning the surface to remove all loose dust etc complete all as specified & directed. |
| 96 | 40mm thick (minimum thickness) PCC type B-0, 1:2:4 (12.5mm graded aggregate) as in padding to roof slab and finishing surface smooth and even to maintain levelling on existing slab complete all as specified and directed. |
| 97 | 15mm thick screed bed or bedding layers in cement mortar 1:4over green surface of concrete on roof surfaces for laying APP based polymeric membrane including mixing with water proofing compound @ 3% or as per manufacturers instruction complete all as specified and as directed. NOTE : Supply only Water proofing compound shall be measured and paid separately. |
| 98 | Water proofing treatrment to RCC roof slab, includingparapet comprising with the following courses of treatment/specification from bottom to top :-(a) Applying bitumenous primer @ 0.4 ltrs per Sqmover plastered surfaces of roof including parapet surface.(b)Over the priming coat ,applying a tack coat of bitumen @ 1.2 kg/sqm of paving grade butumen Vg 20 (60-80 penetration) and providing APP based polymeric membrane minimum weighing 3.00 kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 200 gms/sqm) laid on bitumen surface by forced application and inserting in groove above 15cm from roof in parapet including minimum overlap of 100mm and 75mm atend and sides of the polymeric membrane respectively and sealed all overlaps and joints with suitable adhesive as per manufacturer\"s instruction and including applying bitumen Vg20 paving grade (60 to 80 penetration) @1.20Kg/Sqm & blinded with fine dry sand @0.50Kg/Sqm including testing. (Note:- (i)Laying of APP bassed polymeric membrane shall bedone with torch application methed or as per manufacturer\"s instructions.(ii)APP based polymeric membrane shall be \"Dr Fixit\" manufacturered by M/S Pidilite Industriesor \"MOPLY FP 3MM\" manufactured by M/S Texsa India Limited and \"Hyperplus\" by IWL India Limited |
| 99 | Mild steel work conforming to Fe-290 (Gde E-165) as in grills, gratings etc. with ends of bars shouldered and/or rivetted or forged into spikes; framed guard bars, and similar works, complete all as specfied and directed. |
| 100 | E/M PORTION:-Taking down carefully copper/aluminium point wiring for light, bell socket power socket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket,ceiling rose, celing fan etc to match with existing finishes complete all as specified and directed. |
| 101 | Point wiring with 2x1.5 sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable and 1x1.5 sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth dolly running in and including PVC casing & caping (ISI marked) of suitable size with PVC boards of approporiate size and all requisite accessories such as PVC elbow, Tee, collars, bends etc with PVC terminals box& cover for mounting switches, sockets, fan regulator etc complete all as specified and as directed for the following:- |
| 102 | One light/fan point controlled by one switch |
| 103 | All as per item No. 99 above but with two 2.5 sqmm size cable as phase and neutral and one 2.5 sqmm size cable as earth continuity for 15/20 amp multipurpose socket outlet on independent board |
| 104 | Ceiling rose, 3 phase,bakelite 65x50mm two or three therminals complete all as specified and directed. |
| 105 | Piano Type switch , 1 way, 6 amp, complete all as specified and directed. |
| 106 | Switch socket combination 2 in 1 , 5 pin 16 Amp, flush type complete all as specified and directed. |
| 107 | Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 108 | Supply and fixing LED lights fitting 1x 20W, 230V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 109 | Supply and fixing in repair building security light fittings, 35 watt LED,230v, AC out door type pre-wired,IP-65/66 protection, with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket complete all as directed. |
| 110 | Supply and fixing in repair exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm incl all connecting accessories complete all as specified and directed. |
| 111 | Supply and Fixing in repair Sheet Metal enclosure for SPN DBs, 8 Ways, Double Door (IP-43), with netral link complete suitable for 240 Volts, AC, 50 Hz complete all as specified and directed. |
| 112 | Supply and Fixing in repair MCBs, SPN, 240 volts, breaking capacity 10 KA, \"C\" series, rating 40-63 amps,complete all as specified and as directed. |
| 113 | Supply and Fixing in repair MCB, SP,240 volts, breaking capacity 10 KA, \"C\" series, rating 6 to 32 amps, complete all as specified and as directed. |
| 114 | 1100 volts grade heavy duty cable PVC insulated multi stranded aluminium conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 m apart including 4mm dia GI suspension wire, one twin core cable flat of circular of size 10sqmm including taking down existing old service connection, complete all as specified and directed. |
