|
| 1 | Dismantling Mangalore pattern or similar tiles in roofing including portions bedded in cement mortar complete all as specified and directed. |
| 2 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof coverings /claddings to wall, fixed with self tapping screws including scafoldings of any hieght complete all as specified and directed. |
| 3 | S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof coverings /claddings to wall, fixed with self tapping screws including scafoldings of any hieght complete all as specified and directed. |
| 4 | Dismantling roof battens of any description inany position complete all as specified and directed. |
| 5 | Dismantling of framed work timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed. |
| 6 | Material and labour to replace old decayed timber (including piecing, scarifying, etc of old and new timber if required) second class hard wood clean sawn in scantlings timber framed and fixedin any position and description including scafoldings of any hieght complete all as specified and directed. |
| 7 | Supplied and fixed in repairs to replace old or decayed boarding in patches including cutting out old,piecing, heading joints etc 20 mm thick second class hardwood clean sawn boarding fixed with nails with butt joints in any situation including scafoldings of any heightcomplete all as specified and directed. |
| 8 | Fixing only in repairs in patches including cutting out old,piecing,heading joints etc 20 mm thick second class hardwood clean sawn boarding fixed with nails with butt joints in any situation including scafoldings of any hieght complete all as specified and directed. |
| 9 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 10 | S & F hot rolled medium and high tensile structural steel of grade E 250 quality A conforming to IS 2062: 2011 as in joist, channel, angle, flat iron or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20 mm of the length indicated) complete all as specified and as directed. |
| 11 | S&F Plates (plain or chequered) Fe-410 Gde E-250 quality A, channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment all as specified and directed. |
| 12 | M&L for preparation of new or previously untreated steel surfaces and applying two coats of synthetic enamel paint over a coat of primer red oxide, zinc chrome complete all as specified and directed. |
| 13 | M&L for preparation of old steel surfaces and applying two coats of synthetic enamel paint over a coat of primer red oxide, zinc chrome complete all as specified and directed. |
| 14 | Demolition of cement concrete in ground floor n.exc 15cm thickness (below or above ground level) and removing the demolished material and debrisout side MD land.complete all as specified and directed. |
| 15 | M&L 75 mm PCC 1:3:6 type C-2using 40 mm graded stone aggregate as in plinth protection, flooring/subbase including necessaryshuttering complete all as specified and directed. |
| 16 | M&L for PCC (1:3:6), type C2 (40 mm graded aggregate ) in foundation filling and mass concrete for bottom of manhole complete all as specified and directed. |
| 17 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete allas directed. |
| 18 | M&Llight shade vitrified coloured Ceramic tiles 10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqmin floorsset and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer of mortar 15 mm thick in (1:6)for laying floor finishes complete all as specified. |
| 19 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust or existing applied paint & brushing neat cement slurry with 3.0 kg of cement per sq mtr etc. complete all as specified and directed. |
| 20 | M&Llight shade vitrified coloured Ceramic tiles 10 mm thick (Square/rectangular) polished area of each tile not exceeding 0.36 sqmin vertical surfaces such as skirtingsand dadosset and jointed in neat cement slurry and pointed in white or coloured cement to match including and over rendering 10 mm thick on fair faces of brick work in CM (1:4)complete all as specified. |
| 21 | M&L for digital coloured glazed ceramic tiles 300x450x7mm thick in vertical surfaces (including designed borders ) such as skirting and dados set and jointed in neat cement slurry pointed in coloured cement to match including and over rendering 10 mm thick on fair faces of brick work in CM (1:4)complete all as specified and directed.Note:- (Rate of Designer border in vertical surface will be deemed into quoted rates) |
| 22 | M&L Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed CM (1:6) complete all as specified and directed. |
| 23 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons,dados etc laid, bedded and pointed in any mortar and removal of rubbish off the site complete all as specified & directed. |
| 24 | M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed bese laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to mirror finish inluding Screed bed or bedding layer of mortar 15 mm thick in (1:6)for laying floor finishes complete all as specified and directed. |
| 25 | Ditto all as per Item abovebut in riser of steps, skirting, dado and pillar laid over cement screed and jointed over rendering 10 mm thick on fair faces of brick work in CM (1:4) complete all as specified and directed. |
| 26 | M&L machine Grinding/rubbing/polishing to Kota stone surfaces to mirror finish all as specified and directed. |
| 27 | Material and labour Granite (of any type and colur) 20 mm thick machine cut , bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing laid in steps/floors/Jambs/WHB conters and all other similar worksin approved design over 20 mm thick screed bedin cement mortar 1:4 complete all as specified and directed. |
| 28 | Dismantling of ceiling board (Plup insulation or insulation etc) or insulation board any thickness including cover fillet and grid frame work all as directed. |
| 29 | M & L for anodized aluminium snap grid having a size of605mm x 605mm and sections incorporated in frame work shall conform to IS 733, IS 737 and IS 1285 and snap grid frame work shall be fixed to ceiling with supporting hanger 6mm dia mild steel rod, J bolts with necessary bolts, nuts and washers all as manufacturer instruction, the main & cross tees shall be jointed at junction/crossings with anodized aluminum angle bracket of size indicated it shall be 19.05mm x 19.05mm x 1.45mm, weighing 0.14 Kg per RM, fixed with suitable mild steel, bolts nuts and washer all as per manufacturers instruction, the snap grid shall be supported at ends all along the wall with anodized aluminum angle of size as indicated along if not indicated it shall be 38mm x 25mm x 2.18mm, weighing 0.358 Kg per running meter complete all as specified and directed. |
| 30 | M&L for 7-8 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous materials reinforced with cellulose fibre for fixing in 605 X 605 mm grids .Note:- Frame work for ceiling shall be measured and paid separately.) |
| 31 | Taking downcement plaster ofany description from brick wallsurfaces etc including racking out joints and hacking for key, scrubbing down with water etc complete all as directed. |
| 32 | M & L for plastering 15-20mm thick (Avg) Polymer modified cement mortar in two coats, 15mm base coat and subsequent finishing coat with and including curing as per manufacturer\"s instruction complete all as specified and as directed by Engr-in-Charge.Make- Dr Fixit Repair Pro Polymer Mortar, FOSROC-RENDOROC S2-structural grade Polymer Mortar, Shalifix FRM Polymer Modified Fibre Reinforced Mortar of STP or equivalent as approved by the Engineer-in-Charge |
| 33 | Material and labour for 10 mm thick cement plaster in CM (1:4) on brick work/ RCC wall and finish the surface fair and even without using extra cement complete all as specified and directed. |
| 34 | M&L Rendering 15mm thick in cement mortar 1:4 using intergral water proofing compound on fair faces of brick work to be finished even and smooth(with out using extra cement.complete all as specified and directed.Note: Integral liquid water proofing compound to be used in per bag of cement shall be as per manufacturers instructions and paid separately under respective items.) |
| 35 | Supply only integral waterproofing compound |
| 36 | M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primingpaint over 1mm thick (average) wall putty all as specified. |
| 37 | Materials and labour for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant primingpaint over 1mm thick (average) wall putty all as specified. |
| 38 | M&L for preparation of newly plastered surfaces and applying two coats of 100% exterior grade acrylic paint (wheather proof paint)over one coat of primer complete all as per manfacturer,s specifications and directed. |
| 39 | M&L for preparation of Old plastered surfaces and applying two coats of 100% exterior grade acrylic paint (wheather proof paint)complete all as per manfacturer,s instruction/specifications and directed. |
| 40 | M&L for preparation of old painted wood or wood based surfaces,ofany description, not otherwisedescribed over 10 cm width or girth and apply one coat of synthetic enamel paint complete . |
| 41 | M&L for preparation of new wood or wood based surfaces,ofany description, not otherwisedescribed over 10 cm width or girth and apply twocoat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. . |
| 42 | Taking down Chowkhats or frames with shutters (without taking of shutters from the frame) n exc. 1.50 Sqmeach complete all as specified and directed. |
| 43 | Taking down Chowkhats or frames with shutters (without taking of shutters from the frame)exc 1.50n exc. 4.00 Sqmeach complete all as specified and directed. |
| 44 | Taking down shutters of any description n exc. 1.00 Sqm complete all as spcified and directed. |
| 45 | Taking down shutters of any descriptionexc. 1.00 Sqmn exc 2.00 Sqm complete all as spcified and directed. |
| 46 | Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm single piece extruded PVC profiles reinforced with 19 x 19mm MS square tube provided with EPDM rubber gasket weather seal through out the frame and the profile mitre cut at two corners and joined by inserting 2 nos 150mm long brackets of 15 x 15mm MS square tube inside 19 x 19mm MS square tube suitably screwed complete all as specified and directed. |
| 47 | Supply & fixfactory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes of size 15 x 15mm for top andbottom rails and 19 x 19mm for stiles, MS frame covered with 5mm thick single piece extruded PVC profile \"C\" channel having a 5mm thick PVC sheet strip of 20mm width struck inside with solvent cement, forming stiles, and 5mm thick single piece extruded PVC profile for top rail, lock rail & bottom rail on either side, and 10mm (5mm x 2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail; panelling of 5mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with PVC sheet beading, and joined together with solvent cement adhesive etc all as per manufacturer\"s instructions and drawings as shown in SSR Part-I 2009 complete all as specified. |
| 48 | Supply & fix for 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed. |
| 49 | Material and labour for preparation of wood and wood based materials,new or old, of any description and girth, not otherwise described, and treating ends of posts,back of chowkhats,etc. exc 0.1 sq. m but n exc 0.5 sq. m each and treated with tar or coal tar black paint complete all as specified and directed. |
| 50 | Material and labourfor preparation of wood and wood based materials,new or old, of any description and girth, not otherwise described, treating small articles such as holdfasts,end of posts,backs of chowkhats, etc area n. exc. 0.1 sq m each and treated with tar or coal tar black paint complete all as specified and directed. |
| 51 | Supply & fix 35 mm thick 2nd hard wood rail and style plain framed panelled shutters(any panel) with lock rail and panel of 9 mm thick B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS 1003 (Part-I) kiln seasonedand chemically pressure treatedcomplete all as specified and directed. |
| 52 | Supplied and fitted to chowkhats of2nd class hard wood 35mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securinggauge,etc sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) complete all as specified and directed. |
| 53 | Supplied and fitted to chowkhats of2nd class hard wood 30mm thick Glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc(without sash bars) edges of framing plain, chamfered or rounded, fittted with cut and mitred beads for securinggauge,etc sizes of member of shutter as specified SSR part-I Section 8 clause 8.24 (a) complete all as specified and directed. |
| 54 | Supply and fix for 30mm thick glazed & skelton, open rebated & prepare to receive glass/gauged etc divided in square with plain, chamferred or rounded mitred edges of framing plain, chamfered or rounded fitted with or without sash bars & metred beads for securing glass gauge etc size of members of shutters as specified in SSR Part-I section 8, clause 8.24(b) supplied & fitting to chowkats using 2nd class hard wood all as specified and as directed. |
| 55 | S&F Aluminum alloy anodised sliding door bolts of 300mm long with hasp stapple and fixedcomplete all as specified and directed. |
| 56 | S&F75 mm butt hinges medium weight cold rolled stainlesssteel. |
| 57 | S&Faluminium anodised 100 mm barrel tower bolts of extruded section complete all as specified and directed. |
| 58 | S&Faluminium handle 75 mm cast type anodised |
| 59 | Supply & fix 3 mm thick sheet glass ordinary quality with oil putty in square n. exc. 0.5m in each pane complete all as specified and directed. |
| 60 | M&Lfor Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden/ Aluminium beadding all as directed. |
| 61 | M&Lin repair for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden/ Aluminium beadding all as directed. |
| 62 | S&Faluminium anodised 200 mm barrel tower bolts of extruded section complete all as specified and directed. |
| 63 | S&Faluminium handle 150 mm cast type anodised |
| 64 | S&F100 mm butt hinges extruded aluminium alloy with galvanized mild steel hinges pin anodised type `C\"-22 complete all as specified and directed. |
| 65 | Supply & Fixing in repair vitreous China squatting pan, \" Orissa patteren, size 580 x 440 mm white, with integral footrests (excluding flushing cisteren and flush pipe) including taking down existing squating pan complete all as specified and directed. |
| 66 | S&F in repairs 10 litre capacity PVC low level flushing cisternwith all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete all as specified and directed. |
| 67 | S&F in repair vitreous China wash down water closet pan (pedestal pattern) white,incl. trap, connection to drain and flushing pipe including seat cover for pedstal pan complete all as specified & directed. |
| 68 | S&F in repair vitreous China wash basin white, flat back,size 580X450 mm including cutting for pinning in ends of brackets,complete. |
| 69 | S & F in repairs for vitreous china, half stall urinal flat back, size : 465 x 355 x 265mm white (min) with union and grating for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)incl. providing anf fixing plugs, securing urinal to plugs with and incl, 60 mm long brass screws, pointing around urinal back in cement mortar 1:2 (excl fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and as directed) |
| 70 | S&F PVC connection 15mm size PTMT nuts of length 450 mm complete all as specified and directed. |
| 71 | M&L in repairCP Towel Rail 61 cm long complete all as specified and directed. |
| 72 | M&L in repair CP soap dish all as per cat part. complete all as specified and directed. |
| 73 | S&F in repair 5.50 mm thick of size600X450 mm bevelled edge mirror of selected quality glass and fixed to walls using hidden studs complete all as specified and directed |
| 74 | S&F as in repairs 15 mm boreangular valve cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unionsall as specified and directed |
| 75 | S&F as in repairs 15 mm bore concealed stop cock (regular body)cast copper alloy screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions all as specified and directed . |
| 76 | S&F in repairs15 mm bore pillar taps cast copper alloy,with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred \"HOT or COLD\" with long screwed sunk and fly nuts. all as specified and directed |
| 77 | S&F as in repair 15 mm bore fancy type bib taps long bodycast copper alloychromium plated, screwed down, screwed for iron pipe or for brass ferrule. |
| 78 | Taking up or down steel tubing and connection including cleaning for refixing or removed to store,15 mm dia borecomplete all as specified and directed |
| 79 | Taking up or down steel tubing and connection including cleaning for refixing or removed to store,20 mm dia borecomplete all as specified and directed |
| 80 | S & F GI tubing 15mm bore medium grade medium grde with all fittings and fixed complete to wall and ceilingor laid in floorscomplete all as specified and directed |
| 81 | S & F GI tubing 20 mm bore medium grade medium grde with all fittings and fixed complete to wall and ceilingor laid in floorscomplete all as specified and directed |
| 82 | Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good ,cutting n, exc. 10cm girth complete all as specified and directed. |
| 83 | M&L for PVC (SWR) multi floor trap with grating including jointing with solvent cement for diameter of 75 mm outlet complete all as directed. |
| 84 | M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cementcomplete all as specified and directed. |
| 85 | S&F in repairs 75 mm dia PVC(SWR) pipes single socketed in any length with rubber ring joints, sealed with adhesive suitable for PVC pipes andlaid in trenches or fixed to walls complete all as specified and directed.(Note : upto any height and including necessary scafolding) |
| 86 | S&F 75mm dia PVC (SWR) bends with access doors any radius. |
| 87 | S&F 75 mm dia PVC (SWR) vent cowl. |
| 88 | M&L for gently cleaning the surfaces of the stone masonry and piers with specification water misting techniques employing air water jet using a fine nozzle sprinkling systemcalibration to spray fine mist along the stone surfaces without over wetting followed up by gentled surfactants and cleaning brushing with soft nylon brushes as specified, gentle surfaces cleaning may include using water misting and mild Ph balanced surfactants as specified for indicated areas to remove surface dirt, existing paint. grith surfaces accreetions lime wash etc by means of water misting and Ph balances surfaces cleaning all as specified and directed.Note:- Quoted rate shall be inclusive of removing vegetation on wall surfaces, chajja etc and erection and dismantling of MS tubular double scaffolding up to 8-14 metre height and provision of necessary safety equipment to sklled works to carry out works. |
| 89 | M&L for raking out cement pointing or any other hard material used and careful repointing and repair to be carried of the damaged pointing to walls externally and internally above the base of vaults and apse domes with poor joints, in lime mortar 1:3 (1 lime , 3 sand mix to be approved by consultants before application) of size 50x15mm and filling in of any holes/damage area of stones that may have to be filled in lime mortar pointing to be carefully colour matched using additives such as kattha, sand stone dust and such additives to exactly preparation of batches of samples upto 20 samples of colour matched lime mortar for approved by Eng-in-charge.The contractor to ensure use of masking tapes and sharp specialized spatulae and tools to ensure clear lines and high level of workmanship on site all as specified and directed. |
| 90 | M&L for applying two coats of melamine polish on external wall clading after perpration of surface all as per manufacturers direction all as specified and directed by Engr-in-Charge |
| 91 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 92 | M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. |
| 93 | M&L Priming surfaces and applying normal treatment (formoderate conditions) using glass fibre base bitumen felt, grade 2 all as specified and directed. |
| 94 | Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified. |
| 95 | Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, , cassing capping with accessories and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductorgreen colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer bothinternally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washersand making goodthe disturbed surfaces as per existingfor one light fan point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately . |
| 96 | Description all as per Srl item No.95.00 here in before but for socket outlet point 5 Amp on same board. |
| 97 | Description all as per Srl item No.95.00 here in before but for socket outletpoint 5 Amp on Independent board. |
| 98 | Description all as per serial item No 95.00 above but with 4 sqmm cablefor 3 pin 15 Amps switch socket outlet (Power point) complete all as specified. |
| 99 | Supply and fix switch piano (ISI marked) Single pole 240 volts,5Amps all as specified and directed. |
| 100 | Supply and fix socket(ISI marked) 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and as directed. |
| 101 | Supply and fix switch socket combination (ISI marked) 2/3 pin and 5/15 Amps, flush type, 240 volts complete all as specified and directed. Make- Havells/anchor/ Legrand. |
| 102 | S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd |
| 103 | Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified. |
| 104 | S & F LED light fitting 1x9W/1X10W luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. |
| 105 | Supply and Fix20 watt LED, 6500 K, in repair, 4 feet long fixed including on pvc square for mounting the fittings and electrically connecting with three single core 23/0.0076. PVC insulated multi strandard copper flexible cable from ceiling rose to light fitting (connector block of lamp fitting) and one for earthing complete all as specified and directedWipro, Model No : Wipro Garnet 20W LED Emergency Batten or in equivalent model in Havells / Philips/ Wipro. |
| 106 | S & F Exhaust fan 230 volts, 250mm,metal heavy dutywith wooden frame including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall. |
| 107 | M & Lrefixing of ceiling fan (old fan) and connecting up including provision of cable from ceiling rose or connector andfan Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. with taking down fan, sealing cable end, dismantling romoving andhanging fan andblades and removing fan and blades to store. |
| 108 | Supply and fixing Ceiling fan complete with blades, down rods,electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDCmaking all electric connection. huck and suitable size rod for hanging ceilingfan complete all as specified and as directed |
| 109 | Supply and fixing LED security Buildinglight LED 35 Watt, pressure die cast aluminum housing, heat resistant glass, IP65 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of lightcomplete. |
| 110 | Supply and fix MCB Distribution board , 240 volts single pole andneutral , single door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link,8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking downcomplete all as specified and directed. |
| 111 | Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity \"C\" seriescomplete all as specified and directed including taking down old one. |
| 112 | Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB\"sincluding taking down old one. |
| 113 | Supply and fix in repairs MCCB DB TPN 4 way vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, single door with200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified.(Note:MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule .Note:Copper thimble shall be used for connection of cable . |
| 114 | Supply and fix MCCB TPN, 240 Volts, 63 to 100Amps, 10 kA rupturing capacity 415 Voltscomplete all as specified and directed including taking down old one. |
| 115 | Material & Labour for Sub main wiring in repair, with two run of 6 sq mm stranded copper conductor PVC unseathed FRLSH wire along with 6 sq mm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduite of adequate size (not less than 32 mm dia) for housing the wires for from Pannel / Main DB to house SPN DB including taking down old Unsv submain with all associated fixtures complete all as specified & as directed by engr-in-charge Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 6 sqmm cable and one run of 6 sqmm cable with PVC conduite shall be measured as one length. |
| 116 | M & L Sub main wiring with two run single core 4 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia Cassing cappingISI markedwith all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of4 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 6 sqmm and one run of6 sqmm cable and one run of PVC conduitshall be measured as one RM. |
| 117 | M & L Sub main wiring with two run single core 1.5 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia Casssing cappiingISI markedwith all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of1.5 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as directed.Note: (i) Two runs of 1.5 sqmm and one run of1.5 sqmm cable and one run of PVC conduitshall be measured as one RM. |
| 118 | Supply, lay in trenches, floors ,fix on wall/pole, passing through pipes etc.,LT UG cable , 1100 volts grade, PVC/ XLPE insulated , with multistrandedaluminium conductors, armoured with galvanised steel wire or tape ,gland, lugs etc, of size 35 Sq.mm 3.5core , confirming to IS specifications. |
| 119 | Excavation in trenches in soft/loose soil n.exc 1.5m wide and n. exc 1.5m depth for laying of cable, errection of poles, stay andpipe line,and getting out complete all as specified and as directed. |
| 120 | Returning & filling including spreading, leveling watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified. |
| 121 | Removal of excavated soil to a distance n. exc 50 m above the starting point complete all as specified and directed |
| 122 | M&L for laying of bricks locally available sub class \"B\" bricks (old size) for cable protection cover laid flat and dry in trenches over the cable prependicular to the direction of cableall as directed. |
| 123 | M&L for local sand coushioning with dry and clean over and under the cable for protection of cable , 80 mm sand laid before laying the cable 150 mm sand after laying the cable and filling the sand in cable duct of inside the sub station building complete all as directed |
| 124 | Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways andone handle for lifting made out of 8 mm dia TMTbar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I. |
