|
| 1 | Dismantling timber scantling 40 sq cm & over in section,any position in unframed work,complete all as specified and directed |
| 2 | S&F 2nd class soft wood clean sawn timber fixed in scantling, complete all as specified and directed |
| 3 | S&F 2nd class hard wood clean sawn timber fixed in scantling, complete all as specified and directed |
| 4 | Dismantling of wall & celling boards (fiber pulp insulation etc) or insulation boards/slabs/blanketsany thickness, including cover fillets, complete all as specified and directed |
| 5 | M&L for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work, fixed in ceiling, complete all as specified and directed. |
| 6 | S&F 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative one face veneers onfaces fixedin ceilling with screws to timber frame work, complete all as specified and directed. |
| 7 | M&L for 6mm thick plywood, grade BWR, type BB, fixed with nails to timber frame work, fixed in wall, complete all as specified and directed. |
| 8 | S&F 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative one face veneers onfaces fixedin wall with screws to timber frame work, complete all as specified and directed. |
| 9 | S&F Second class soft wood plain fillets square, rectangular or triangular in section, clean sawn,secured with nails, cross sectional area exc 6 and n.exc 13 Sqcm, complete all as specified and directed. |
| 10 | S & F in repair curtain rails, harrison rail, aluminium alloy chromium plated with fixing brackets, stops, rollers etc., complete all as specified and directed. |
| 11 | Dismantling boarding, any description, fixed in any position, complete all as specified and directed. |
| 12 | S & F 20 mm thick, second class hard wood boarding clean sawn, planed one side with butt joints and fixed with nails in any situation as in eaves board, etc.,complete as specified and directed. |
| 13 | M&L preparation of new painted wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 14 | M & L for preparation of old wooden surfacesof any description , not other wise described, over 10cm width or girth including and applyingtwo coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 15 | Demolition of cement concrete (un reinforced) in ground floor and paving n.exe 15 cm thickness (below or above ground level), complete all as specified and as directed. |
| 16 | M&L 25 mm thickplain cement concrete 1:2:4 type B-1 ( using 20 mm graded stone aggregate) as in sub base of floors finished even and fair, complete all as specified and as directed. |
| 17 | M&L for Virified Ceramic light shade tiles 10 mmthick (square/ rectangular polished, area of each tiles exceeding 0.36 sqm but n exc 0.42 sqm, as in floors etc. set and jointed inneat cement slurry and pointed incement white or coloured to match the shade of tiles laid overand including 15mm thick screed bed or bedding layer in cement mortar 1:4 ,complete all as specified and directed |
| 18 | M&Lfor plain cement concrete 1:4:8type D2 (Using 40mm graded crushed stone aggregate) 75mm thickas in sub base of floors finished even and fair, complete all as specified anddirected. |
| 19 | M&L for chequered cement concrete tiles 30cm X30cmX25mm thich set, joined and pointed in neat cement slurry in floors with grey cement and with grey cement and pigment laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 ,complete all as specified and directed |
| 20 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises, complete all as specified and as directed |
| 21 | M&L forVitrified Ceramic light shade tiles 10 mmthick (square/ rectangular polished, area of each tiles not exceeding 0.36 sqm, as in skirting, dados, walls, vertical surfaces etc. set and jointed inneat cement slurry and pointed incement white or coloured to match the shsde of tilesandincluding 10mm thick backing coat in cement mortar 1:3, complete all as specified and directed. |
| 22 | M&L forglazed ceramic tilesof size 350x250x7mm/450x350x7mm thick, as in skirting, dados, walls, vertical surfaces etc.,set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles including 10mm thick backing coat in cement motor 1:3, completeall as specified and directed. |
| 23 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, complete all as specified and directed |
| 24 | M & Lfor Machine cut kota stone slab flooring 20 - 25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including 15mm thick screed bedin cement mortar 1:4 and jointed with grey cement slurry @ 2 Kg per square, complete all as specified and directed |
| 25 | M&L for Granite (of any type) work ,20 mm thick, (table rubbed and polished) in steps jambs , pillars ,window cills ,cooking platforms ,and the like in cement mortar (1:4) including pointing in white cement (1;2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thcik screed bed or bedding layer in CM 1:3, complete all as specified and directed. |
| 26 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exc 1.5 sqm but n.exc 4 sqm each, complete all as specified and directed. |
| 27 | S&F 2nd class hardwood plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, complete all as specified and directed. |
| 28 | S&F 35 mm thick 2nd class soft wood (kail) glazed and skeleton shutters, open rebated and prepared to receive glass, gauze (without sash bars), edges of framing plain,, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section -8 , clause 8.24 (a), complete all as specified and as directed . |
| 29 | S&F Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples, complete all as specified and as directed. |
| 30 | S&F butt hinges, medium weight cold rolled, mild steel of size 100 mm, complete all as specified and as directed |
| 31 | S&F150 mm long aluminium barrel tower bolts of extruded section and fixed,complete all as specified and directed |
| 32 | S&F150 mm aluminum alloy handles, fabricated type, anodised, complete all as specified and directed |
| 33 | S&F Aluminium alloy, anodised, sliding door bolt 300 mm with hasp, staple (bolt type) and fixin glips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sectionsor cast- aluminium alloy and fixed, complete all as specified and as directed |
| 34 | Taking downcement plaster on brick or stone walls incl.raking out joints hacking for key scrubbing down with water etc., complete all as specified and as directed |
| 35 | M&L for 15mm thick rendering on other than fair faces of brick / concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement, complete all as specified and directed. |
| 36 | M & L preparing surface of newly plasteredwalls and applying three coats of whitewashcomplete as specified and directed. |
| 37 | M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 38 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth forfoundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting outt in soft/loose soil, complete as specified and directed. |
| 39 | M & Lfor plain cement concrete1 : 4 : 8Type D2 (using 40 mm graded crushed stone aggregsate) as in foundation and mass concrete,complete as specified and directed. |
| 40 | Returning, filling in, including spreading levelling, watering and well ramming in layersnexc25 cm in soft/loose soilcomplete as specified and directed. |
| 41 | Removing Excavated soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point,complete as specified and directed.. |
| 42 | M & Lbrick work with sub class \"B\" bricks straight or curved on plan exc 6 m mean radius built inCM1 : 6, complete as specified and directed. |
| 43 | M & L for 20mm thick Damp proof coursein CM 1:2 to horizontal or vertical surfaces including necessary formwork, complete as specified and directed. |
| 44 | Supply only Integral waterproofing compound,complete as specified and directed. |
| 45 | M & L broken stone hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface,complete as specified and directed. |
| 46 | M & L for 100 mm thick plain cement concrete 1:4:8 Type D2 ( using 40 mm graded crushed stone aggregate) as in sub base to floors,complete as specified and directed. |
| 47 | M&L for Non - skid Ceramic colourtiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles laid over and including 15mm thick screed bed or bedding layerin cement mortar 1:4, complete all as specified and directed |
| 48 | M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates. of Gde Fe 410-W (Gde- E-250) Qty-Acomplete as specified and directed. |
| 49 | M&L forpreparation of new steel & iron surfaces of any description over 10cm width or girth and applying two coats synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed |
| 50 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete as specified and directed. |
| 51 | M&L for Non asbestos fibre cement boards 600x600x4mm thick fixed in ceiling including fixing of aluminium frame snap grid frame work of grid 605x605mmwork with screws, complete as specified and directed. |
| 52 | Material and labour for rendering 15 mm thick cement plaster in CM (1:4) on fair faces of brick or concrete surfaces and finishing the surface even and fair (without using extra cement) etc.complete all as specified and directed. |
| 53 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint, complete all as specified anddirected. |
| 54 | S&F solid PVC door frames of size 50mm X 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube complete all as specified & directed |
| 55 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete as specified and directed. |
| 56 | S&F 250mm aluminium alloy, anodisedsliding door bolt with hasp, staple (bolt tyoe) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed |
| 57 | S&F china wash down water closet padestal pattern white excluding flush and fix to position, including seat cover and connection to drain etc., complete as specified and directed. |
| 58 | S&F PVC valveless , syphonic action type , flushing cistern, low level ,white, with inlet, ball valve, float and handle,completewith flush pipe of polythelene of low or high density or PVC 32 mm dia , including brackets / fastening assesoriesof 10 litres capacity, complete all as specified and as directed. |
| 59 | S&F Vitreous China wash basin with pedestal support, white , flat back,size 550x400mm fixed onbrackets or stands, including 32 mm waste coupling CP Brass and outlet PVC pipe etc, complete all as specified and as directed |
| 60 | S&F 600mmX450mm bevelled edge Mirror of selected quality glass, mounted on 6mm thick AC building Board or commercial plywood and fixed to wooden plug with chromiun plated brass screw and cup washer, complete as specified and directed. |
| 61 | S & FGI tubing, medium grade, 15 mm borewith all fittings and fixed complete to walls or laid in floors,complete as specified and directed.. |
| 62 | S & F GI tubing, medium grade, 20 mm bore with all fittings and fixed complete to walls or laid in floors, complete as specified and directed. . |
| 63 | S&F PVC connections 15mm size with PTMT nuts of length 450mm etc., complete all as specified and directed. |
| 64 | Supply and Fixed wash hand basinBrass CP mixture 15mm bore for mixing hot and cold water screwed down for 15 mm iron pipe and fixed , complete all as specified and directed. |
| 65 | S&F15 mm bore, Stop/Angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed. |
| 66 | S&F 15mm bore, bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule , complete as specified and directed.. |
| 67 | S&Fbrass cromium plated tubeler towel rail 20 mm diainclding brackets,complete as specified and directed. |
| 68 | S & FCP steel grating 75/100mm dia, complete all as specified and directed. |
| 69 | S & F 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed,complete as specified and directed. |
| 70 | M&LPVC (SWR) floor trap, 75mm dia bore plain with grating including jointing with solvent cementcomplete as specified and directed. |
| 71 | S & F 110 mm bore PVC (SWR) pipes (Medium duty) single socketed in any length with rubber ring joints fixed to walls/floor with and including clamps, nut bolts,complete as specified and directed. |
| 72 | S&F 110mm PVC (SWR) bend, branch piece, single (single \"Y\"/\"T\") equal or unequal,complete as specified and directed. |
| 73 | S&F PVC (SWR) pipes 75mm dia bore single sockets, in any length with rubber ring joints, laid in trenches or floors/wall, complete as specified and directed. |
| 74 | S&F PVC (SWR) bends 75mm dia bore, complete as specified and directed. |
| 75 | S & FHealth faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete in all respect as specified. |
| 76 | S&F Toilet paper holder of stainless steel fixed to walls,complete as specified and directed. |
| 77 | Demolition of brick or stone boulder masnory, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facing, dressed stonework and percast concrete articles,complete as specified and directed. |
| 78 | Cutting holes into or through brick walls built in brick walls, in cement mortar or cement lime mortar and stone walls exc 150 sqcm but not exc 400 sqcm, complete as specified and directed. |
| 79 | Providing, cement concrete type B1, 1:2:4 ( using 20mm graded crushed stone aggregate) in roof kerbs or mud stops, filling brick wall holes, rounded or chamfered on edges, complete as specified and directed. |
| 80 | Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in any type soil, complete as specified and directed. |
| 81 | S & F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an strength of 550 Mpa as in roof covering/cladding to wall, ridge fixed with self tapping screws,complete as specified and directed. |
| 82 | M & L 10mm thick rendering on fair faces of brick work or concrete surface in cm 1:6 to be finished even and smooth with out uing extra cement, complete as specified and directed. |
| 83 | Material and labour for Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper acrylic /distemper oil emulsion acrylic, white or tinted over a coat of primer of same make, complete all asspecified and directed |
| 84 | M & L for2nd class hard wood, plain straight, solid chawkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, supplied and fixed incl fixing hold fastner,complete as specified and directed.. |
| 85 | S & F 2nd class hard wood 35mm thick plain framed panlled shutters (any numbers of panels) of 2nd class hard wood with panels of timber flat on both sides or of veenerred particles boards medium density, wood particle board with commercial face veereers, complete as specified and directed.. |
| 86 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed. |
| 87 | S&F sheet glass 3mm thick ordinary quality and glazing with oil putty or fixed withwoodenbeadsin squarenot exc. 0.5 Sqm in each pane, complete all as specified and directed. |
| 88 | Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars shutters (openable for windows); barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanksand similar work conforming to Fe.290.Gde-E-165,complete all as specified and directed. |
| 89 | S&F 300mm aluminium alloy, anodisedsliding door bolt with hasp, staple (bolt tyoe) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed. |
| 90 | M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS-15658-2006 of60mm thickness M-35 Gradewith grey cement and pigment, complete all as specified and directed. |
| 91 | M&L for sand cushoning 25mm thick for interlocking tiles, complete all as specified and as directed |
| 92 | M&L forColouredChequred cement concrete tiles 30cm x 30 cm x 25 mm thick, laid over andincluding 15mm thick screed bed or bedding layer in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match with grey cement and pigment, complete all as specified and directed. |
| 93 | M&L Brickwork with sub-class ‘B’ bricks in brick-on-edge walls (less than ½ brick thick), built in CM 1:4,complete all as specified and directed. |
| 94 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete (FE 410-S) including old unserviceable wooden gate, complete all as specified and directed. |
| 95 | M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter to obtain fair finished surface, complete all as specified as directed. |
| 96 | M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchionsto obtain fair finished surface, complete all as specified as directed. |
| 97 | M & L for reinforced cement concrete1:2:4, type B-1 using 20 mm graded crushed stone aggregate (nominal mix) in foundations, including rafts, footings, foundation beams; Plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete,complete all as specified as directed. |
| 98 | M & L for reinforced cement concrete1:2:4, type B-1 using 20 mm graded stone aggregate (nominal mix) in columns, pillars, piers, posts and struts, complete all as specified as directed. |
| 99 | M & L for mild steel TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 100 | Description all as per Serial Item No 99 here-in-before, but 5mm dia and over upto and including 10mm dia asin stirrups, spacers and binders, complete all as specified and directed. |
| 101 | M & L for granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,complete all as specified and directed. |
| 102 | Excavation in post holes (or similar holes) in soft/loose soil each n. exc 0.50 Cum and getting outand removing surplus earth to a distance n. exc 50m, complete all as specified and directed. |
| 103 | M & L for plain cement concrete1 : 2 : 4Type B2 ( using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete, complete all as specified and directed. |
| 104 | S & F Mild steel screw bolts 11 to 15 mm diameter of shank screw bolts (machine made) with hexagonal screw heads at one end & screwed the other or screwed both ends, each screwed endsto be fitted with washers & one hexagonal or square nuts, small end exe 10cm and not exc 15cmlong, complete all as specified and directed. |
| 105 | S & F Mild steel work as a wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling,boltingor riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed. |
| 106 | Fixing only chain link fencing including line wires, any mesh size and type to any type of standards including provission of binding wire, complete all as specified and directed. |
| 107 | Supply only Chain link MS galvanisd fencing, any size or type, complete all as specified and directed. |
| 108 | S&F mild steel in joist channel, angle or T section, fixed independentl, without connecting plate ect (cut to ordinary length i.e, within 20mm of the lenhth indicated). of Gde Fe 410-W (Gde- E-250) Qty-A, complete all as specified and directed. |
| 109 | S & F Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats & connecting plates, etc., complete all as specified and directed. |
| 110 | M&L 40 mm thickplain cement concrete 1:2:4 type B-1 ( using 20 mm graded stone aggregate)as in floor topping of hard standing/floor finished even and smoothwithout using extra cement (PCC shall be laid in alternate bays in panels of size, complete all as specified and directed. |
| 111 | M&L for taking down carefully existing old burnt out / unserviceable aluminium / copperpoint wiring system any type/ size and any description complete for light, fan,bell,socket, power points etc complete including removing the all type of fittings & fixture alongwith it connected fixing acessories such as all switches, sockets, ceiling roses, holder,regulators,bell etc complete and removing ofall the old materials from the site for to taking as a schedule of credit, complete all as specified and directed.. |
| 112 | Taking down ceiling fans 48\"/56\" sweep, cleaning the dust properly, oiling and greasing of bolts and bearings including and repair itif required and refixing and connecting up, complete all as specified and as directed . |
| 113 | Taking down Wall fans of Fan of any Size sweep, cleaning the dust properly, oiling and greasing of bolts and bearings including and repair itif required and refixing and connecting up, complete all as specified and as directed . |
| 114 | M&L for making single phasing point wiring system used as copper conductor wire for phase and neutral wiring system the wire made out of PVC insulated FRLS of 1100 volt grade with having multistranded copper conductor wire of size 1.5 Sq.mm (Nominal area) ISI marked drawn through wiring system surface on wall or concealed in wall with the help of heavy duty ISI mark PVC casing capping strip / PVC conduit pipe ISI mark in any lengthy wiring system and along with its all connected fittings accessories including providing of pressed steel terminal sunken boxes or heavy duty PVC box and duly fixed it concealed in wall or surface on wall and alongwith providing of back and face top covered plate frame or electro plated plastic laminated sheet for housing / mounting of any type/size switches sockets, regulators etc and including using /drawing of one run of single wire 1.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI marked with multistranded copper conductor wire used as a continuous earth wire for point wiring complete system and including making the good to all disturbed surfaces of wall/ceiling area of new wiring system and to match to it as per the existing surface of wall/ceiling etc, complete all as specified and as directed . |
| 115 | Descriptionall as per serial item No113 here-in-before, but one light point / fan point wiring system controlled by oneway switch,complete all as specified and as directed. |
| 116 | Descriptionall as per serial item No 114 here-in-before, but one 5 Amp socket outlet point wiring system fixed on same board & controlled by one way switch,complete all as specified and as directed. |
| 117 | Descriptionall as per serial item No 114 here-in-before, but one 5 Amp socket outlet point wiring system fixed on independent board & controlled by one way switch,complete all as specified and as directed. |
| 118 | Descriptionall as per serial item No 114 here-in-before, butusing PVC insulated FRLS wire 1100 volt grade with multistranded copper conductor wire of size 2.5 Sq. mm (Nominal area) ISI Marked for power socket point on indenpent board point wiring systemand also providing of 2.5 sqmm PVC insulated FRLS wire 1100 volt grade ISI Marked with multistranded copper conductorwire used as a continuous earth wire for power point wiring system, complete all as specified and as directed. |
| 119 | Supply and fixingswitch paino flush type single pole one way5/6 Amps, complete all as specified and as directed. |
| 120 | Supply and fixing of socket outlettwo in one3/5 pin multi pin type 5/6 Amps, complete all as specified and as directed. |
| 121 | Supply and fixing of switch flush type single pole one way15/16 Amps, complete all as specified and as directed. |
| 122 | Supply and fixing of socket outlettwo in one5/6 pin multi pin type 15/16 Amps , complete all as specified and as directed. |
| 123 | Supply and fixing of step type electronic fan regulator flush type with having hum free step alongwith speed control know suitable for single phase, complete all as specified and as directed. |
| 124 | S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm, complete all as specified and as directed. |
| 125 | Supply and fixing of LED tube lightfitting of 1x 20W/22W 220V AC decorative box type with driver, holder including LED tube light with having energy efficient type use in both warm/white type colourcomplete including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting comlplete and including taking down of old fitting, complete all as specified and as directed. |
| 126 | Supply and fixing in repair LED Bldg Security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and as directed. |
| 127 | S&F star rated electric ceiling fan 1200mm sweep min air delivery 210 CFM with service value 6.0 BEE norms 5 star rating with bruhless direct current motor (BLDC)of single phase 230 volt AC alongwith blade, down rod, canopy, clamps with reel insulator, electronic regulator & accessories and MS fan hook fixed in ceiling/roof including providig flate flexible copper wire and making all electricalconnection, complete all as specified and directed. |
| 128 | S & F and testing star rated of electric ventilation exhaust fan of Size 300mm sweep complete Ac single phase 230 volt and made out of strudy engineering Steel body complete with blade and lowers with shutter and also or making ofsuitable type/size of hole on wall of any type of wall construction work for installation/fixing of exhaust fan after fan fixing work making good to all disturbed hole surface area of wall/ceiling and floor area of hole system and to match/dressing to it as per the existingsurface on wall/floor/ceiling etc by cement plastering work, complete all as specified and directed. |
| 129 | S & F Storage type Water heater (Geyser) 5 STAR of Cap 25 Ltrs working on 230 volts AC supply with in and out going water connection pipe (Hot & Cold)fixing arrangement with nut bolts and making good the disturbed surface, complete all as specified and directed. |
| 130 | Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable ofsize/type of distribution board of rating SPN 8 way type 220 volt AC supply systemwith IP protection rating with ISI marked and having neutral and earth link bus bar and mounting base chanel suitable for holding MCBs incommer and s outgoingsystem complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs, complete all as specified and directed. |
| 131 | Supply and fixing of sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrengment system suitable ofsize/type of distribution board of rating SPN 12 way type 220 volt AC supply systemwith IP protection rating with ISI marked and having neutral and earth link bus bar and mounting base chanel suitable for holding MCBs incommer and s outgoingsystem complete set and including dully fixed surface on wall or concealed in wall and making all necessary electrical and also refixing the electric meter and its wiring connection including taking down of existing meter and DBs, complete all as specified and directed. |
| 132 | Supply and fixing of MCB SPN 40 to 63 Amps with breaking capacity 10KA \"C\" Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring connection complete including taking down of old MCB, complete all as specified and directed. |
| 133 | Supply and fixing of MCB SP 40 to 63 Amps with breaking capacity 10KA \"C\" Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring connection complete including taking down of old MCB, complete all as specified and directed. |
| 134 | Supply and fixing of MCB SP 06 to 32 Amps with breaking capacity 10KA \"C\" Curve series, 220 Volts, 50 Hz AC supply complete and also making suitable size / type of electric wiring connection complete including taking down of old MCB, complete all as specified and directed. |
| 135 | M & L for Submain wiring with 2 runs of single core 10 sqmm FRLS PVC insulated unsheated multistranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC conduitconcealedand conduit accessories of medium grade not not less than 25 mm dia including one run of single core 10 sqmm FRLS PVC insulatedunsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain riwing complete all as specified and as directed.Note: 3 runs of 10 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre. |
| 136 | Supply, laying and testing ofLT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty)with aluminium conductor 1100 volt gradecross sectional area of size 16 sqmm 2 core including laid in trenches or fixing on poles or passing through pipes complete including taking out of old unserviceable cable any type any size, complete all as specified and directed. |
| 137 | M&L for earthing work complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level and connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers of galvanised steel and to be protected by GI pipe 15 mm bore light grade & connected to earth test point/main switch board or main control board and also providing charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soilall as shown in Electrical Plate No 3 of SSR part -I. and also making arrangment of20 mm dia bore galvanised iron pipe (medium grade) for water and making funnel, wire mesh,and also including provision of concrete pit cover framing work in PCC (1:2:4) type B-1 using 20mm graded of stone aggregate with XPM (weight not less than 4 Kg/Sqm) and outer frame work of angle iron 25x25x6mm with top concrete pit cover and handle for lifting of cover complete work all as specified and directed . |
| 138 | Supply & fixing of modular type switch 5/6 Amps 220 Volts AC,one module, complete all as specified and directed. |
| 139 | Supply and fixing of modular type socket of 5/6 Amps 220 Volts AC,3/5 multi pin type with two modular, complete all as specified and directed. |
| 140 | Supply and fixing of modular type switch of 15/16 Amps 220 Volts AC one module, complete all as specified and directed. |
| 141 | Supply and fixing of modular type socket of 15/16 Amps 220 Volts AC 5/6 multi pin type with two modular, complete all as specified and directed. |
| 142 | S&F galvanised steel tubing, light grade, ISI marked, for protection of under ground cable on pole/wall/under roadpipe 40 mm bore, complete all as specified and directed. |
| 143 | Supply, laying and testing ofLT cable XLPE insulated screened, PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty)with aluminium conductor 1100 volt gradecross sectional area of size 10 sqmm 2 core including laid in trenches or fixing on poles or passing through pipes completeall as specified and directed. |
| 144 | Supply and fixing LED mirror light fitting with high out put diffuser 2 feet long of 10 Watt220 volt AC decorative type with driver holder and LED lamp with having energy efficient type use in both warm/white type colour complete light fitting set all as per existing fitting type/ size of sample /model and make and including providing of suitable type flate fexible cable for electric connection from ceiling rose to fitting and making electric connection, complete all as specified and directed. |
| 145 | Supply and fixing of LED street light fitting for buildings of rated capacity 35 Watt 230 volt AC with having LED driver,lamp bracket with impact and corrosion resistant with lense embeded including thermal management in multiple optices complete with IP 65/66 protection suitable for out door type made out of high pressure die cast hosing with heat resistant glass complete including providing of suitable size of dia GI pipe light grade bracket and it to match/setting the new fitting fixture hole attechment system of suitable bracket length upto 1.2 mtr long and make to shape / bendof 120 degree angle including duly fixed alongwith existing pole /bldg wall/ roof with the help of 02 Nos ofMS fixing clamp alongwith nut bolt and including providing of suitable type of flate fexible two/three core cable and making electric connection, completeall as specified and directed. |
| 146 | S & F sheet metal enclosure box duly powder coated & framing work with locking system and having double door fixing arrangment system suitable of rating of size/type of distribution board SPN 4 way type 220 volt AC supply system with IP-43 protection system and having mounting chanel with having suitable rating of copper bus bar and suitable size of common neutral and earth link and also making all necessary electrical connection and duly fixed surface on wall or conceled in wall with the help of cutting chases to wall for fixing of DB and making good the disturbed wall surface, complete all as specified and directed. |
| 147 | S&F LED BOLLARD light fitting decorative type with drivers & LED luminaire of rating capacity in 20W 220 volt AC Size 2\"\" with new genertion energy saving environmental friendly long life & having unique concept LED Bollard in IP 66 to ensure sustainable performance in all section and aesthetics wich keeps the surrounding lively complete set including making and duly fixed on PCC block with holding attechment work (when if required at site) for settingand also providing of suitable type of flat fexible two/three core cable and making electric connection complete all as specified and directed. |
| 148 | M & L for Submain wiring with 2 runs of single core 06 sqmm FRLS PVC insulated unsheated multistranded 1100 volts grade with copper conductor drawn through and including non-metalic rigid PVC conduitconcealedand conduit accessories of medium grade not not less than 25 mm dia including one run of single core 06 sqmm FRLS PVC insulatedunsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain wiring, complete all as specified and as directed.Note: 3 runs of 06 Square mm cable and 1 run of PVC conduit with accessories shall be measured as 1 unit of running metre. |
| 149 | Supply and fixing post top lantern Led type 40 watt 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrision resistant complete with driver and lamp complete all as specified and as directed. |
| 150 | Supply and fixing ofrigid non metalic PVC conduit of size 20/25 mm bore heavy duty with all fitting laid in trenches/ wall including providing clamping arrangment for holding of pipe on wall inproper size of clamps, nut bolt ,and washer etc complete all as specified.and directed |
| 151 | Notes :-An amount of Rs.11077.34.00 on account of Credit Schedule for Schedule \"A\" Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. |
