|
| 1 | B/R Portion :-Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and as directed. |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing ), removing serviceable tile to store and rubbish off the premises complete all as specified and directed. |
| 3 | 25 mm thick PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in levelling course to floor surface, finishing surface even and fair, complete all as specified and directed. |
| 4 | 75 mm thick cement concrete (1:3:6), type C-1 using 20mm graded stone aggregate as in floors, hard standing etc and laid in alternate bays complete and finished the even & fair and providings joints through out the thickness of plinth protection filed with mastic filling comprising one part of 01 bitumen 85/25 grade and three part of sand by weight all as specified and directed |
| 5 | Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11Sqm but n exc. 0.18Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 6 | Glazed ceramic coloured tiles 450mmx350mm x7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick rendering in cement mortar 1:4, complete all as specified and directed by Engr-In-Charge. |
| 7 | Vitrified ceramic light shade tiles 10 mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.36sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 8 | Vitrified ceramic light shade tiles 10 mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.36sqm in verticle surface such as skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shad of tiles,including 10mm thick rendering in CM (1:4), complete all as specified and directed. |
| 9 | 20mm thick Heavy Duty endura coloured tiles of size 45cmx45cm /40cmx40cm, joint less,in floors, laid over and including screed bed15 mm thick in CM 1:4 complete all as specified and directed. |
| 10 | Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed. |
| 11 | Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed. |
| 12 | Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 13 | 5mm thick cement plaster rendering in CM 1:3 on fair faces of concrete surfaces & finishing the surface even and smoothin ceiling, chajja in doublestorey building etc without using extra cement,complete all as specified and directed. |
| 14 | 15mm thick rendering in CM 1:4 on fair faces ofbrick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed. |
| 15 | 15mm thick rendering in CM 1:6 on fair faces ofbrick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed. |
| 16 | Preparation of new plastered surface of Wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ .90 ltr/10 sqm over new surfaces in painting on walls in camouflage pattern with combination of minimum five colours as approved by GE complete all as specified and as directed. |
| 17 | Complete removal of existing treatment on wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ .90 ltr/10 sqm over new surfaces in painting on walls in camouflage pattern with combination of minimum five colours as approved by GE complete all as specified and as directed. |
| 18 | Preparation of newly plastered or unplastered surfaces of walls and applying two coats of oil emulsion distemper complete all as specified and directed. |
| 19 | Complete Removal of existing treatment and preparing of old plastered or unplastered surfaces of walls and applying two coats of oil emulsion distempercomplete all as specified and directed. |
| 20 | Preparation of newly plastered surfaces and applying three coats of white wash on ceiling surfaces complete all as specified and directed. |
| 21 | Preparation of old plastered surfaces and applying two coats of white wash on ceiling surfaces complete all as specified and directed. |
| 22 | Taking down chowkhats or frames with shutters exc 1.5 Sqm but n.exc 4 Sqm (without taking off shutters from frame) complete all as specified and directed. |
| 23 | Taking down chowkats or frames n exc 1.50 Sqmwith shutters (without taking off shutters from the frame) complete all as specified and directed. |
| 24 | Taking down shutters of any description exc 2.0 sqm each complete all as specified and directed. |
| 25 | Anodised aluminium framefor doors,windows, ventilatorswith one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 26 | Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 27 | Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 28 | 6mm thick plain solid colour PVC sheet fixed to aluminium doors at site as per manufacturer instructions complete all as specified and directed. |
| 29 | 5.50mm thick Sheet glass of ordinary quality,glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, complete all as specified and directed. |
| 30 | 4mm thick Sheet glass of ordinary quality,glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, complete all as specified and directed. |
| 31 | Anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as per requirement and direction of Engineer-in- charge. |
| 32 | Factory made Pressed steel frames of size 125x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc. complete including bottom of each chowkat to be welded with 02 Nos 25x3mm thick Flat iron projecting 10cm on either side & PCC 1:3:6 type C-0 in back filling of chowkats & tarring back of chowkats and hold fastscomplete all as specified & directed. |
| 33 | Factory made Pressed steel frames of size 105x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos 25x3mm thick Flat iron projecting 10cm on either side & PCC 1:3:6 type C-0 in back filling of chowkats & tarring back of chowkats and hold fastscomplete all as specified & directed. |
| 34 | 35mm thick 2nd class hard wood plain, framed, panelled shutter (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered paticle board medium density, wood particle board with commercial face veneers complete all as specified and directed. |
| 35 | 35mm thick 2nd class hard woodglazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated shash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters , supplied & fitted to chowkats complete all as specified and directed. |
| 36 | 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 37 | Preparation of new wooden surfaces of any description exc 10cm width or girth including knotting and stopping as required and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 38 | 150mm long Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed |
| 39 | 75mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed. |
| 40 | Vitreous china wash down water closet pan (pedestal pattern), white with seat cover including all fittings, fixing nut bolts, connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc fixed in repair,complete all as specified and directed. |
| 41 | Supply and fixing in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. |
| 42 | Supply & fixed in repair, Vitreous china wash hand basin, counter type oval shape ofsize 550 x 400 mm excluding taps, wastechain and plug and porcelain stopper but including brackets, waste pipe & CP waste coupling complete all as specified and directed. |
| 43 | 15mm bore brass chromium plated basin mixerfor mixing hot & cold water screwed down for iron pipe fixed in repair, complete all as specified and directed. |
| 44 | PVC valve less syphonic action type flushing cistern 10ltr capacity , low level white with inlet ball valve float and handle including brackets including 32mm dia PVC flush pipe for low level cistern including all joints fixed in repair , complete all as specified and directed. |
| 45 | 15mm bore Stop valve/angle cock, cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, fixed in repairs, complete all as specified. |
| 46 | Supply and fixing in repair Bib taps 15mm bore of cast copper alloy chromium plated , screwed down, high presure with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule, fixed, complete all as specified and directed. |
| 47 | PVC connection 15mm size with CP nuts on both ends of length 600mm fixed in repairs, complete all as specified and directed. |
| 48 | Grating doom 100 mm dia with waste hole of PTMT (minimum weight-40 gms),complete all as specified and directed. |
| 49 | Supply and fixing in repair 600mm x 450mm size bevelled edge mirror with border, selected quality 5mm thick glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engineer-in-Charge. |
| 50 | Supply and fixing in repair Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed |
| 51 | Soap dish of CP fixed with and including chromium plated brass screws and wooden/plastic plugs, fixed in repairs, all as specified and directed. |
| 52 | Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 53 | Tubular towel rail 60cm long 20mm dia aluminium anodised incl necessary brackets, fixed in repair, complete all as specified and directed. |
| 54 | Dismantling of cast iron drain pipe of any dia set in cement mortar/concrete and taking out of trenches if required, complete all as specifie and directed. |
| 55 | PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement fixed in repair, complete all as specified and directed. |
| 56 | PVC (SWR) pipes 75mm dia,Type B, any length single socketed with rubber ring joint, laid in floor, fixed in repair, complete all as specified and directed. |
| 57 | PVC (SWR) pipes 75mm dia,Type B, any length single socketed with rubber ring joint, laid in walls, fixed in repair, complete all as specified and directed. |
| 58 | PVC (SWR) pipes 110mm dia, Type B, any length single socketed with rubber ring joint, laid in floor, fixed in repair, complete all as specified and directed. |
| 59 | PVC (SWR) pipes 110mm dia, Type B, any length single socketed with rubber ring joint, laid in walls, fixed in repair, complete all as specified and directed. |
| 60 | PVC (SWR) bends any radius 75mm bore fixed, complete all as specified and directed. |
| 61 | PVC (SWR) bends any radius 110mm bore fixed, complete all as specified and directed. |
| 62 | PVC(SWR) branch piece, single (single Y) equal or unequal 75mm bore fixed in repair, complete all as specified and directed. |
| 63 | PVC(SWR) branch piece, single (single Y) equal or unequal 110mm bore fixed in repair, complete all as specified and directed. |
| 64 | PVC (SWR) junction single (single T) 75mm bore equal or unequal, fixed in repairs, complete all as specified and directed. |
| 65 | PVC (SWR) junction single (single T) 110mm bore equal or unequal, fixed in repairs, complete all as specified and directed. |
| 66 | PVC (SWR) vent cowl for 75mm dia fixed in repair, complete all as specified and directed. |
| 67 | Dismantling water tanks of any description exc 500 & nexc1000 litre capacityand removing from site complete all as specified and directed. |
| 68 | Rotational moulded polyethylene water storage tankstriple layer (Cylindrical vertical with closed top), ISI marked hoisted and fixed in position all as spd in SSR Pt-I,of capacity1000 Ltrs including making necessary connection and fittings, complete all as specified and as directed. |
| 69 | Ball brass valves, high pressure, with polythene float and fly nut complete screwed for iron pipe or brass ferrule, 20mm bore fixed, complete all as specified and directed. |
| 70 | 20mm bore gun metal globe or gate valve (ISI marked) with iron wheel head,screwed both ends for iron pipe fixed in repair complete all as specified. |
| 71 | Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 72 | Taking up or down steel tubing of 25mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 73 | 16mm dia 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 74 | 25mm dia 3-layer PP-R (Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 75 | Taking down existing tarfelt including tiles and demolition of concrete & screed bed complete from roof surfaces including parapets and lowering without disturbing the existing RCC roof slab and removing the same to a distance not exc. 100m including roughening ofold concrete surface of roofby wire brushing and cleaning the surface to remove all loose dust etc complete all as specified & directed. |
| 76 | 40mm thick PCC type B-0, 1:2:4 (using 12.5mm graded stone aggregate) as in padding to roof slab and finishing surface smooth and even to maintain levelling to existing slab complete all as specified and directed. |
| 77 | 15mm thick screed bed or bedding layers in cement mortar 1:4 in order to maintain proper slope over existing roof surfaces including mixing of liquid water proofing compound@ 3% or as per manufacturers instruction complete all as specified and as directed. NOTE : Supply only water proofing compound shall be measured and paid separately. |
| 78 | Water proofing treatrment to RCC roof slab, includingparapet comprising with the following courses of treatment/specification from bottom to top :-(a) Applying bitumenous primer @ 0.4 ltrs per Sqmover plastered surfaces of roof including parapet surface.(b)Over the priming coat ,applying a tack coat of bitumen @ 1.2 kg/sqm of paving grade butumen Vg 20 (60-80 penetration) and providing APP based polymeric membrane minimum weighing 3.00 kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 200 gms/sqm) laid on bitumen surface by forced application and inserting in groove above 15cm from roof in parapet including minimum overlap of 100mm and 75mm atend and sides of the polymeric membrane respectively and sealed all overlaps and joints with suitable adhesive as per manufacturer\"s instruction and including applying bitumen Vg20 paving grade (60 to 80 penetration) @1.20Kg/Sqm & blinded with fine dry sand @0.50Kg/Sqm including testing. (Note:- (i)Laying of APP bassed polymeric membrane shall bedone with torch application methed or as per manufacturer\"s instructions.(ii)APP based polymeric membrane shall be \"Dr Fixit\" manufacturered by M/S Pidilite Industriesor \"MOPLY FP 3MM\" manufactured by M/S Texsa India Limited and \"Hyperplus\" by IWL India Limited |
| 79 | Demolition of existing soakage well ,complete all as specified and directed. |
| 80 | Supply only liquid water proofing compound of Dr. Fixit or equivalent make complete all as specified and directed. |
| 81 | Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 2.4 M dia X 4.5 M effective depth as per TD drg CEUZ/TD/1203/2003 amended upto date complete all as specified and directed. |
| 82 | On site LLDPE septic tank of minimum capacity 10 users designed to carry sewage and sullage water, excavation in any type of soil and removing surplus excavated metrerial to a distance excceeding 50 mtr but not exceeding 100 mtr and providing 200 mm thick PCC 1:4:8, type D-2 as foundation below tank, including Vent shaft, connection etc.,complete all as specified and directed. |
| 83 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 84 | Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 85 | Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, valley gutterand similar worksfixed with self tapping screws complete all as specified and directed. |
| 86 | Dismantling of timber scantling 40sqcm and over in section,in any position, complete all as specified and directed. |
| 87 | Rolled mild steel works as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam,tee,angle, channel or flat sections) including distance pieces, cleats etc Fe 410W(Gde E-250), quality \"A\" complete all as specified and directed. |
| 88 | Applying two coats of synthetic enamel paint over a coat of red oxide primer to new or previously untreated steel surfaces over 10cm width or girth including preparation of surfaces, complete all as specified and as directed. |
| 89 | Rendering 15 mm thick on stone masonry surface or other than fair face of brick work or on one side of lathingfinished even & smooth without using extra cement in CM 1:6, complete all as specified and directed. |
| 90 | Rendering 15 mm thick on stone masonry surface or other than fair face of brick work or on one side of lathingfinished even & smooth without using extra cement in CM 1:4, complete all as specified and directed. |
| 91 | Walling of random rubble stone masonry uncoursed , well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete all as specified and directed. |
| 92 | All as per Item No.91 above but except stone( using old serviceable stones obtained from dismataling) complete all as specified and directed. |
| 93 | Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.18Sqm but n exc. 0.38Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 94 | Non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.18Sqm but n exc. 0.38Sqm in vertical surfaces like skirting,dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 10mm thick rendering in CM (1:4), complete all as specified and directed. |
| 95 | 25 mm thick PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregate) as in sub base of floor, finishing surface even and fair, complete all as specified and directed. |
| 96 | 40mm thick PCC 1:2:4, type B1, using 20 mm graded aggregates as in sub base in floors, finished even and fair etc. complete all as specified and directed. |
| 97 | Machine cut pre polished kota stone slab flooring 18-20 mm thick as in floor with & including white marble border of 150mm wide, 16-20mm thick laid over & including 20mm thick screed bed in CM 1:6 and jointed with white/grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 98 | Machine cut pre polished Kota stone 20-25mm thick as in riser of steps, skirting, dado and pillar fixed over & including cement plaster 15mm thick in CM 1:4 and jointed with grey cement slurry mixed with pigment tomatch the shade of the kota stone including rubbing and polishing includingcomplete all as specified and directed. |
| 99 | Chequered cement concrete tiles 300x300x 25mm thick, set & jointed in neat cement slurryin floors and pointed with grey cement mixed with pigments, laid over and including 20mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 100 | 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on one sides andother face is covered with decorative face veneer with lipping/frame to match, complete all as specified and directed. |
| 101 | Box Type Steel Windows/ Ventilatorsconforming to IS-1038,manufacturedwithISI marked rolled steel sections by any ISI approved manufacturer. Fixed and openable framesfabricated of sections specified in drgs, corners welded to form a soild fused welded joint. The process of welding adopted may be flash butt welding which gives a continuous and solid joint all along the place of meeting of the member. Welds shall be properly ground and left with no protrusions of welding material at the joint. Handles shall be of Z section welded with openable frame. Box steel section used in outer frame, shutter frame and central frame shall be ERW section of 16 guage. Fixing lugs to fixed trames shall be as per provision of IS-1038 except that top lugs shall not be provided. All openable shutters of side hung windows shall be provided with non friction hinges.Two mild steel tower bolts of size as shown on drawings shall be provided to each leaf of window (one at top and one at bottom). Each tower boltwelded on 3mm thick steel sheet piece of suitable size which shall in turn be welded to Z section of steel window to provide suitable arrangement of using tower bolt, complete all asshown on drg No. CEUZ/TD-1518/15 , sheet 1/3 to 3/3 and as directed. |
| 102 | Mild steel work conforming to Fe-290 (Gde E-165) as in grills, gratings etc. with ends of bars shouldered and/ or rivetted or forged into spikes; framed guard bars, and similar works, complete all as specfied and directed. |
| 103 | 3mm thick Sheet glass of ordinary quality,glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, complete all as specified and directed. |
| 104 | Galvanised steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with aluminium wire staples or wooden beading complete allas specified and directed. |
| 105 | Mild steel butt hinges, medium weight, cold rolled,100mm long, complete all as specified and directed. |
| 106 | Aluminium anodised, barrel tower bolts of extruded section of size 150mm and fixed, complete all as specified and directed. |
| 107 | Aluminium alloy handles, cast type, anodised of size 150mm and fixed, complete all as specified and directed. |
| 108 | 300mm Mild steel ordinary rat tail rod pattern springs including roller and roller platecomplete all as specified and directed. |
| 109 | Dismantlingwall/ceiling board (fibre, pulp, insulation, etc) or insulation board, slabs/ blankets,of any thickness, including cover fillets complete all as specified and directed. |
| 110 | Dismantling of timber scantling under 40sqcmin section unframed work as in fillets, rails, posts, rafters, purlins etc , complete all as specifie and directed. |
| 111 | Suspended false ceiling using E- grid suspended ceilinggrid system of gridsize 600x600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross Tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24mm x 0.5mm using 4mm thick high pressure stream cured classic variant E-board, designer pattern (ISI marked, IS No 14862-2000) & E board to be placed in the grid suspended by 4mm GI wire hangers from the purlins of the roof with butter fly clips, complete all as specified and directed.Make:- Everest Industries Ltd or its equivalent as approved by GE. |
| 112 | E/M PORTION:-Taking down carefully copper/aluminium point wiring for light, bell socket power socket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket,ceiling rose, celing fan etc and making good to disturbed surfaces of wall, floor etc to match with existing finishes complete all as specified and directed. |
| 113 | Point wiring with 2x1.5 sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable and 1x1.5 sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth dolly running in and including PVC casing & caping (ISI marked) of suitable size with PVC boards of approporiate size and all requisite accessories such as PVC elbow, Tee, collars, bends etc with PVC terminals box & cover for mounting switches, sockets, fan regulator etc complete all as specified and as directed for the following:- |
| 114 | One light/fan point controlled by one switch complete all as specified and directed. |
| 115 | One 5 Pin, 6 amp socket outlet on same board complete all as specified and directed. |
| 116 | One 5 Pin, 6 amp socket outlet on independent board complete all as specified and directed. |
| 117 | All as per item No. 113 above but with two 2.5 sqmm size cable as phase and neutral and one 2.5 sqmm size cable as earth continuity for 15/20 amp multipurpose socket outlet on independent board complete all as specified and directed. |
| 118 | Ceiling rose, 3 phase,bakelite 65x50mm two or three therminals complete all as specified and directed. |
| 119 | Piano Type switch , 1 way, 6 amp, flush type complete all as specified and directed. |
| 120 | Socket outlet 2 in 1, 5 pin 6 Amps, flush type complete all as specified and directed. |
| 121 | Switch socket combination 2 in 1 , 5 pin 6 Amp, flush type complete all as specified and directed. |
| 122 | Switch socket combination 2 in 1 , 5 pin 6and 16 Amp, flush type universal complete all as specified and directed. |
| 123 | Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed. |
| 124 | Invert Led Lamp , CDL 12 Watt , B22 base all as specified and as directed. |
| 125 | Supply and fix in repairs Electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 / 1400 mm sweep complete all as specifiedand as directed. |
| 126 | Supply and fixing in repair Inverter LED light fittings, 1x20 w LED, 230 V complete with all accessories internally per wired including lithium ION battery with charging time 8-10 hours and back up time upto 4 hours andconnecting up with PVC insulated and sheathed, 1100 v grade, flexible, multistranded copper conductor three core cable complete all as directed. |
| 127 | Decorative LED wall light fitting 15 watt, champagne gold finish fixed with plastic body suitable for 15 watt retrofit Led bulb, opeal white PC diffuser for glare free light complete all as specified and directed |
| 128 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 129 | Supply and fixingin replacementLED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 130 | Supply and fix in repair exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm incl all connecting accessories complete all as specified and directed. |
| 131 | Supply and fixing in repair ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed by engineer-in-charge. |
| 132 | Supply and Fixing in repair Sheet Metal enclosure for SPN DBs, 8 Ways, Double Door (IP-43), with netral link complete suitable for 240 Volts, AC, 50 Hz complete all as specified and directed. |
| 133 | Supply and Fixing in repair MCBs, SPN, 240 volts, breaking capacity 10 KA, \"C\" series, rating 40-63 amps,complete all as specified and as directed. |
| 134 | Supply and Fixing in repair MCB, SP,240 volts, breaking capacity 10 KA, \"C\" series, rating 6 to 40 amps, complete all as specified and as directed. |
| 135 | Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit notless than 2.25 m below ground level) with top edge of the earth plate not less than 1.5 m below ground level, connected to GI earth wire 4mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I, connected to earth test point all as specified or indicated including excavation and connected earth work in soft / loose soil, P.C.C 1:3:6 type C-1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15mm bore GI medium grade earth lead protection pipe, 50mm thick R.C.C. 1:2:4 type B-1 cover slab of earth pit reinforced with 8mm dia TMT bars @ 10cm C/C both ways and with handle made out of 10mm dia bars, funnel, strainer,charcoal and testing on completion including dismantling unserviceable earthing complete all as specified and as directed. |
| 136 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armouredwith galvanised steel wire or tape and overall PVC sheathed 16 sq. mm nominal cross section in service connections complete all as specified and directed. |
| 137 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 138 | Supply and Fixing in repair Sheet Metal enclosure for SPN DBs, 12 Ways, Double Door (IP-43), with netral link complete suitable for 240 Volts, AC, 50 Hz complete all as specified and directed. |
