|
| 1 | Demolition of cement concrete (unreinforced ) in ground floor and paving n.exc 15cm thickness below or above ground level) complete all as specified and as directed. |
| 2 | Demolition of roofs (other than ground floors), beams, staircase, landing, chajjasin any description and in any positionetcincluding backing coat below APP and all other as specified and directed by engineer in charge . |
| 3 | Demolition ofBrickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articlesl etc complete. |
| 4 | M&L old brick work with fly ash bricks (FASB)straight or curved on plan exc 6m mean radious built cement mortar 1:6 complete (on parapet wall) all as specified and as directed. |
| 5 | Demolition of cement concrete (reinforcement cutas facilitate demolition) in any description and in any position not other wise specifically provided for complete all as specified at site. |
| 6 | Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc complete all as specified and as directed. |
| 7 | Taking down 15 mm bore steel tubing and connection including cleaning and refixing or removal to store etc complete all as specified and as directed. |
| 8 | Taking down 20 mm bore steel tubing and connection including cleaning and refixing or removal to store etc complete all as specified and as directed. |
| 9 | Fixing only 20 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete all as specified and as directed. |
| 10 | S&F 15 mm diaCPVC pipes SDR 11with all plain CPVC SDR 11fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete all as specified and directed by EIC. |
| 11 | S&F 20 mm diaCPVC pipes SDR 11with all plain CPVC SDR 11fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete all as specified and directed by EIC. |
| 12 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each etc complete all as specified and as directed. |
| 13 | -do- but exc 1.5 Sqm and n exc 4 sqm each. |
| 14 | Taking down shutters of any description nexc 1 sq.meach removal to store complete all as specified and as directed. |
| 15 | Dismantling/demolition of existing water tanks of steel /PVC/RCC of capacity exceeding 250 liters but not exceeding 500 litres complete and the scrap should be removing from site all as specified and as directed. |
| 16 | M & L for complete removal of existing treament on ceiling andapplying two coat of white wash complete all as specified and as directed. |
| 17 | M & L for Complete removal of existing treament of wall by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit and applying two coat of oil emulsion distemper on walls with roller over a coat of chalk white priming coat complete all as specified and as directed. |
| 18 | M & L for complete removal of existing treatment on old surface of wall by scrubing with hard wire brush, washing down with water and applying two coats of weather proof exterior acrylic emulsion paintof approved make and approved by GE over one coat of primer from the same manufacturer complete all as speified and directed by EIC. |
| 19 | M&L for a coat of JK/Birla wall care putty 2mm thickincluding preparation of surface complete all as specified and as directed. |
| 20 | M&L for rendering 15 mm thick on external faces of brick work or concrete surfacesCM 1:4, and finishing the surface even and smooth without using extra cement completeall as specified and directed. |
| 21 | M&L renderig 15mm thick in cementmortar 1:6 over other than fair faces of of brick or concrete surface of wall rendering is to be finished even and smooth without using extra cement complete all as specified and as directed. |
| 22 | M&L renderig 5mm thick in cement mortar 1:4 on ceiling surface and finished even and smooth with out using extra cment complete all as specified and as directed. |
| 23 | M & L for preparation of new plastered surfaceandapplying two coat ofoil bound distemper with roller on walls over a coat of chalk white priming coat complete all as specified and as directed. |
| 24 | M & L for preparation of new surface of wall and applying two coats of weather proof exterior acrylic emulsion paintof approved make and approved by GE over one coat of primer from the same manufacturer complete all as speified and directed by EIC. |
| 25 | M & L for preparation of new plastered surface and applying three coat of white wash on ceiling complete all as specified and as directed. |
| 26 | Dismantling of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floor,wall, aprons etc complete all as specified and directed. |
| 27 | M&L for non skid Coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in floors & Skerting etc. set and jointed in neat cement slurryand pointed in white or coloured cement to match to floor etc including 15 mm screed bed with CM(1:6) completeall as specified and as directed. |
| 28 | M&L for coloured joint free ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in skirting/dado etc. set and jointed in neat cement slurry and pointed in colour cement to match to floor, over and incl 10 mm thick rendering on wall or conc surfaces in cement mortar 1:6 ,complete all as specified and as directed. |
| 29 | M&L for glazedcoloured ceramic tiles 300x600x7 mm thick for work in vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match the existing wall surfaces, over and incl 10 mm thick rendering in cement mortar 1:4 etc complete all as specified and as directed. |
| 30 | S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring jointslaid in floors or trenches and taking down old PVC/CI/Concrete pipes complete all as specified and as directed. |
| 31 | S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring jointslaid in floors or trenches and taking down old PVC/CI/Concrete pipes complete all as specified and as directed. |
| 32 | S&F PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints fixed to walls and taking down old PVC/CI/Concrete pipes complete all as specified and as directed. |
| 33 | S&F 110 mm bore PVC (SWR) bends with heal any radius complete all as specified. |
| 34 | S&F PVC (SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls and taking down old PVC/CI/Concrete pipes complete all as specified and as directed. |
| 35 | S&F 75 mm bore PVC (SWR) bends any radius complete all as specified. |
| 36 | S&F 110 mm bore PVC (SWR) bends with oval access door any radius complete all as specified. |
| 37 | S&F 75 mm bore PVC (SWR) bends with oval access door any radius complete all as specified. |
| 38 | S&F PVC (SWR) branch pieces, single( equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 75mm bore of pipe complete all as specified and as directed. |
| 39 | S&F PVC (SWR) branch pieces, single( equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 100mm bore of pipe complete all as specified. |
| 40 | S&F 75 mm bore PVC (SWR) floor trap complete all as specified. |
| 41 | S&F PVC (SWR) cowl 100mm bore complete all as specified and as directed. |
| 42 | M&L for 16-18 mm thick Granite (of any type) work (table rubbed and polished) inwindow cills, cooking platform,steps, jambs, pillars and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone including cutting andpolishing types over 20 mm thick in CM(1:6) etc complete all as specified and as directed. |
| 43 | Rounding to edges of stone slabs one edge, such as in stair steps, cooking platform, and other similar situations etc complete all as specified and as directed. |
| 44 | M&L for machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, over and including 20 mm thick screed bed or bedding layer in cementy mortar 1:4,etc complete all as specified and as directed. |
| 45 | M&L for machine cut kota stone slab 18-20mm thick, in riser of steps, skirting, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete,incl 10mm thick rendering on wall or conc surfaces in cement mortar 1:4 ,complete all as specified and as directed. |
| 46 | S&F in repair sinks made of stainless steel 1mm thick in kitchen or laboratory with drainage board with plug washers and waste pipe including bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting unionto pipe over all size 915mm x 460mm bowl size 410mm x 330 mm x 160mm. and to be fixed with granite or surface with proper gradient for wash out of water all as specified and directed. |
| 47 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to thestiles & rails with suitable PVC sheet beading, and joined together with solvent cementall as directed and specified by Engineer-in-Charge. |
| 48 | S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube etc complete all as specified and as directed. |
| 49 | S&F Pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and as directed. |
| 50 | S&F Pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and as directed. |
| 51 | S&F30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sidesincluiding necessery beadings etc complete all as specified and as directed. |
| 52 | S & F factory made35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a),divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed. |
| 53 | S & F butt hinges medium weight SS and fixed 100 mm size etc complete all as specified and as directed. |
| 54 | S & F butt hinges medium weight SSl and fixed 75 mm size etc complete all as specified and as directed. |
| 55 | S&F but hinges extruded aluminium alloy with galvanised mild steel hing pin, anodised and fixed, type C-21 100 mm size in toilet with PVC doors etc complete all as specified and as directed. |
| 56 | S&F aluminium anodised barrel tower bolts of extruded section and fixed fixed 200 mm long etc complete all as specified and as directed. |
| 57 | S&F aluminum handles cast type anodized 150 mm size etc complete all as specified and as directed. |
| 58 | S&F mild steel, 300 mm ordinary door spring including roller and roller plate etc complete all as specified and as directed. |
| 59 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and as directed. |
| 60 | M&L two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed. |
| 61 | M&L two coat synthetic enamel paint over one coat of red oxide primer on new steel surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed. |
| 62 | S&F galvanized mild steel wire cloth 0.36 mm nominal dia of wire and avg width of aperture 1.18 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed. |
| 63 | S&F 18 mm thick WPC board of prelaminated both face with decorative colour fixed with screws, solvent cement/adhesive to make kitchen cabinet /shutters incl taking down old wooden partical boards complete all as per specifications and as directed by the Engr-in-Charge |
| 64 | S&F Continuous (piano) hinges, mild steel bright finish electrogalvanised 20mm width of flap etc complete all as specified and as directed. |
| 65 | S&F Hasp & staple safety type aluminium anodized with mild steel hing pin incl bolt to hing plate and fixed with screws 100mm size etc complete all as specified and as directed. |
| 66 | S&F auto closing hinges 35mm of 0 crank (KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete all as specified and as directed. |
| 67 | S&F stainless steelhandles 100mm size for kitchen cabinet shutters complete all as specified and as directed. |
| 68 | M&L for Hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 69 | M&L for 75mm thick cement concrete type C-2 1:3:6 (using 20 mm graded stone aggregate) as in plinth protection finished surface even and smooth without using extra cement complete all as specified and as directed. |
| 70 | M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in filling & mass concrete in floor and sunken portion complete all as specified and as directed by Engineer -in-charge. |
| 71 | M&L for machine pressed precast concrete interlocking paver block colour Glossy finishes any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade and fixed with grey cement and pigment over andincluding 50 mm thick sand cussion complete all as specified and directed. |
| 72 | M&L for cement concrete type B-1 ,1:2:4 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 73 | M&L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed. |
| 74 | Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed. |
| 75 | M&L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in copping or roof kerbs on roof chamfered on edge including troweling slightly complete all as specified and as directed. |
| 76 | M&L 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is stilgreen finished even and fair including mixing ofwater proofing compound as per manufacturer instructionetc complete all as specified and as directed. Note :- Water proofing compound shall be measured separately assupply only |
| 77 | Supply only integral water proofing compound complete all as specified and as directed. |
| 78 | M&L for one coat of bituminous based primer conforming to IS-3384-1965 @ 0.3 Kg/Sqm to be applied on prepared surface, till the surface is properly impregnated complete all as specified and as directed. |
| 79 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. |
| 80 | M&L for toping layer of precast machine pressed cement concrete tiles of size 25cm x 25cm x 22 mm thick conforming to IS : 1237-1980 shall be laid in neat cement slurry without pigment over and including 15 mm thick cement mortar screed in 1:4 and joints between the tiles to be filled with chemical like tile grout or equilent complete all as specified and directed. |
| 81 | S & F 500 litre capacity of rotational moulded polyethylene water storage tank triplelayered construction, ISI marked of make specified (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified in SSR Part-I complete all as specified and as directed. |
| 82 | S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 83 | S&Fin repair20 mm boreBall valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm etc complete all as specified and as directed. |
| 84 | S&F figured glass ,pin head type 3mm thick and glazing with oil putty in square n.exc 0.5sqm in each pane complete all as specified and as directed. |
| 85 | S&F Powder coated aluminium sliding windows with fly proof shutters having top rail of section 41mmx20mmx1.6mm thick, bottom rail of section 41x20x1.6mm thick ,vertical style of section 38x20x1.6mm thick including necessery jointing cleats ,glazing clips, rubber packing ,snap beading, screws handle and locking system etc, fitted including usingg standard aluminium section including necessery fittings and fixtures complete all as specified and directed. |
| 86 | S&F Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 87 | S&F framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders ; framed balusters; walk ways; railings; framework of watertanks and similar work conforming to Fe 290. Gde-E-165 complete all as specified and as directed. |
| 88 | S&F Sheet glass 4.8 mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 89 | S&F Anodised aluminium ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed. |
| 90 | M&L for rendering 15mm thick in cement mortar 1:3 mixed with water proofing compound as per manufacturer instructions surfaces finished even and smooth without using extra cement complete all as specified and directed. (Note :- WPC shall be measured and paid seprately) |
| 91 | M&L for applying two coats of latex / epoxy compound approved manufactured orapproved by GE in proportions as per manufacturer instruction complete on surfaces floor and wall of sunken portion treatment complete including testing by ponding all as specified and directed. |
| 92 | S&F in repairchromium plate curtain rod 25 mm dia withbrackets and knobs at both end complete all as specified and directed |
| 93 | S&F in repairs vitreous china squatting pan \"ORISSA PATTERN \" size 580mm x 440mm \"white with integral foot rest (excluding flushing cistern and flush pipe ) with \"P\" or \"S\" trap, front or back inlet including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed |
| 94 | S & F in repair Vitreous China Ware Wash hand basin white, flat back, size 450 x 300 mm size(flat back or angle back type)including cutting for and pinning ends of brackets or erecting stand and waste pipe. |
| 95 | Suppy only 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 96 | S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed. |
| 97 | S&F PVC connection 15mm dia with Brass nuts of length 450mm etc complete all as specified and as directed. |
| 98 | S&F in repair brass CP wall mixer 15mm dia bore mixing hot & cold water with shower rose for screwed down for iron pipe and fixedfor bathroom complete all as specified and as directed. |
| 99 | S&F 15mm bore Pillar taps, cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered ‘Hot\" or ‘Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed |
| 100 | S&F in repair 15 mm bore angle cock long threadfancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete all as specified and as directed. |
| 101 | S&F in repair 15 mm bore stop cock long thread (concealed type) fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete all as specified and as directed. |
| 102 | S&F in repair 125 mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing of steel pipe or union complete all as specified and as directed. |
| 103 | S&F in repair 15 mm bore bib taps long bodychromium plated fancy type, cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe or for unions and fixed 15 mm boreetc complete all as specified and as directed. |
| 104 | Supply and fixing stainless steel plate rack of size 750x900x250mmcomplete all as specified and as directed. |
| 105 | Supply and fixing 250-300mm size corner glass shelf with bracket fixed with screws and thickness of glass 8-10mm complete all as specified and as directed by Engineer-in-Charge. |
| 106 | S&F 600mm CP towel rail \"D\" type fixed to wall with CP brass screws complete all as specified and as directed. |
| 107 | S&F SS chromium plated peg set of five fixing with wall complete all as specified and directed |
| 108 | M& L Providing precast RCC Cover Slab, 1:2:4 type B 1 using 20 mm graded stone aggregate as in manhole cover slabs including necessary form work etc. set in CM 1:6 complete.Note :- reinforcement shall be measured and paid separately. |
| 109 | S&F for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete, all specified and directed. |
| 110 | Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth for sewage line, manhole etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and as directed. |
| 111 | Returning filling in including spreading, levelling, watering and well ramming in layer nexc 25 cm in soil complete all as secified and directed |
| 112 | Removing of excavated materials n exc.exc 50 m and deposited where where directed complete all as specified. |
| 113 | Demolition and breaking 150mm dia drain pipe (salt glazed stoneware) set in cement mortar including packing under and haunching against side of pipe complete all as specified and as directed. |
| 114 | M&L for 150mm bore reinforcement concrete pipes, class NP-3 laid and laid jointed complete with collers complete all as specified and as directed. |
| 115 | M & L cement concrete bed to 150mm dia drain pipe including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate complete all as specified and as directed. |
| 116 | Taking down carefully copper/ aluminium point wiring (light, fan, socket, or power) complete fitting such as switches, ceiling roses pendants, regulators, sockets, light fitting ceiling fan etc to be measured seperately ) removing materials for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperatly) and making good disturbed surface of walls floors etc all as specified and directed. Note-Responsibility after taking down fan/exhaust fan keep in safe custody of contractor and refix the same afterbefore completion of work the rate of same deemed to be included in the item quoated rate. |
| 117 | Taking down carefullyexisting wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size anycapacity fromboards completeall as specified and as directed. |
| 118 | Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed. |
| 119 | M & L for concealed point wiring One light point controlled by one switch complete with PVC insulated and unsheathed flame retardant low smoke and halogen ( FRLSH ) cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 20 mm dia, clip, with MS terminal boxes (not less than 1.6mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dollywith3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green multi stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed. |
| 120 | Ditto all as per item No 119 above but one exhaust fan controlled by one switch and regulator. |
| 121 | Ditto all as per item No 119 above but 5 Amp socket outlet point controlled by one switch on independent board. |
| 122 | Ditto all as per item No 119 above but 5 Amp socket outlet point controlled by one switch on same board. |
| 123 | Ditto all as per item No 119 above but one bell/buzzer point controlled by one switch . |
| 124 | Ditto all as per item No 119 above but one light pointcontrolled by two way switch with cable 1.5Sqmm. |
| 125 | S&F modular socket 20Amps with MCB 20Amp \"C\" type complete all as specified and as directed. |
| 126 | Description all as per item No 119 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 2.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed. |
| 127 | S&F switch pianoflush button type 5 Amp single pole one waycomplete all as specified and asdirected. |
| 128 | S&F socket outlet 2 in 1,3pin, 5 Amp flush type complete all as specified and asdirected. |
| 129 | S&F switch pianoflush button type 5 Amp two waysingle phase complete all as specified and asdirected. |
| 130 | S&F switch pianoflush button type 16/20 Amp single pole one way complete all as specified and asdirected. |
| 131 | S&F socket outlet2 in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and asdirected. |
| 132 | S & F delux Fan Regulator whiteelectronic rotary, socket type 240 Volt50 Hz complete all as specified as directed. |
| 133 | S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittingscomplete all as specified as directed |
| 134 | S & F 9W/10W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. Make C&S Cat No LTHPLEDLAMP7W/B22 or equivalent make as specified in Appndx\"B\" to PS . |
| 135 | S&F TPN DB-DPX 125 MCCB DBs 4 way single door with provision for DPX 125 MCCB and as incomer and SP/TP MCBs as outgoing Nos of modules DPX 125+12, including 125 Amp MCCBcomplete all as specified and directed. |
| 136 | S&F MCCB 4 pole, 415V, AC , 3 phase, 50 HZ, breaking capacity 16 KA with fixed thermal and fixed magnetic setting of capacity 63 Amps 100% ICU complete all as specified and as directed. |
| 137 | S&F ceiling rose,surface polycarbonate63 x50mm three terminals completeall as specified and asdirected. |
| 138 | M&L, sub main wiringwith two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and includingnon metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 20 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed.(NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chasesin wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface. |
| 139 | S&F sheet metal enclosure double doorconcealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar SPN DB 8 ways 240 V complete all as specified and as directed . |
| 140 | S&F MCB single pole and neutral 40 Amp / 63 Amp 240 V ,10KA , \"C\" series, complete all as specified and as directed with copper lugs |
| 141 | S&F MCB single pole 6 to 32Amps 240 V,10KA, \"C\" series,complete all as specified and as directed |
| 142 | S&F LED T/L fitting completre with basic all porpose surface and wall mountedled batten with aluminium housing & intergrated elecotronic driver 10 watt capacity 2 feet long and incl connection from ceiling rose complete all as specified and as directed. |
| 143 | S&F electric bell, AC 230 Volts, single pole, ding dong type complete all as specified and directed . |
| 144 | S&F modular bell push, piano type 6 amp SP one way complete all as specified and as directed |
| 145 | S&Fbell push, piano type 6 amp SP one way complete all as specified and as directed |
| 146 | S&F air fresh fan 250 mm sweep noiseless light-weight rust proof body self closing louvers and blades complete with all arrangements of making hole complete all as specified and as directed. |
| 147 | S&F storage type water heater (Geyser), 230 Volt AC, 25 Ltrs capacity BEE 5 star rating comprising copper inner tank,suitable heatng element, thermostate with adjustable temperature stting 0-90 C, indication lamps provision for inlet outlet and air vent connections & heavy duty with brass nuts, 450 mm long mounteted on wall surfaces including all fixing arrangement such s faster bolts, nuts washers etc complete including making gooddisturbed wall surfaces matching with the existing surfaces and finishing all as specified and as directed by Engr-in-charge. |
| 148 | Supply and fixing in repair 22 W LED 6000kDecorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 28watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and directed by Engr-in- Charge. |
| 149 | Supply and fix LED 35/36 W building security light fitting,5700 K energy saving & environmental friendly long life versatile pressure die cast aluminiumIP 66.road way luminare with high power LEDs as light source and electronic driver suitable for pole dia 35 mm including 35 mm dia light grade tube bracket ,bend to shape 1.80 mtrlength with two nos of clamps of size 50mm x 6mm with nuts and bolts,washers etcincluding connection with 1.5sqmm threesinglecorePVC insulated and PVC sheathed cable stranded copper cable upto ceiling rose and fixing on walls/pole complete all as specified and directed. Make Bajajcat part noBRLEP20WLEDWH or equivelent make as specified in Appendix B to PS. |
| 150 | Supply and laying or fixing or passing through HDPE pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with gaivanised steel or strip and overall PVC sheathed, 25 Sqmm 4 core ISI marked as per IS 7098(Part 1) including connecting on LT OH line/LT panel/DB with suitable lugs, glands, binding wire etccomplete all as specified and directed by Engineer-in-Charge. |
| 151 | Supply and laying or fixing or passing through HDPE pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with gaivanised steel or strip and overall PVC sheathed, 35 Sqmm 4 core ISI marked as per IS 7098(Part 1) including connecting on LT OH line/LT panel/DB with suitable lugs, glands, binding wire etccomplete all as specified and directed by Engineer-in-Charge. |
| 152 | Supply and Fixing Exhaust fans AC single phase 230/240V of size 300 mm sweep, 1250-1350 RPM with louvre complete including with all arrangement of making holes on wall, making good and finishing of disturbed surfaces matching with the existing surfaces, necessary fixing arrangement such as fastener bolts, nuts, washers etc, of appropriate size all as specified and as directed |
| 153 | Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etcfor protection of LT cable XLPE grade 1100 volts complete all as specified and directed by Engineer-in-Charge. |
| 154 | Supply and fix MCCB having breaking capacity of of 16 KA 415V, 4 pole having rating capacity of 100 Amp 100% ICU complete all as specified and as directed. |
| 155 | M&L pipe galvanised iron of size 50 mm dia, light grade ISI marked, complete with fittings laid in trenches/ fixed with poles etc as protection to cables complete as ditrected by Engineer in Charge |
| 156 | M&L for earthing completewith galvanisedsteelearth plateelectrode of size 600 mm x 600 mm x 6 mm thickweithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade)and watering pipe 20 mm bore GI pipe(light grade) andchamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg.50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and saltcomplete and earth leadconnected to earthing test point (up to main switches, DBs) completeall as specified &testing on completion. NOTE:-(I)item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii)PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra costof additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate. |
