Tender For Special Repairs To Certain Otm Accn At Hms Under Ge East Hisar And Ge West Hisar, Hisar-Haryana

TDR : 53854161

Tender Notice
BOQ

24 Days Left

Hisar , Haryana

Tender Brief : Tender For Special Repairs To Certain Otm Accn At Hms Under Ge East Hisar And Ge West Hisar

Document Fees
₹ 2000 /-

EMD
₹ 460910.0 /-

Tender Value
₹ 3.85 Crore /-

Submission Date
05-03-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed.
2	Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed.
3	S&F made single extruded WPC (Wood Polymer composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45mm x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).
4	-ditto- all as per item No 3 above but of frame size 65 x 100mm
5	-ditto- all as per item No 3 above but of frame size 65 x 125mm
6	Factory made single exturded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus ofelasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: Stainless steel butt hinges and necessary S S screws shall be paid separately)
7	S&F for 1mm thick factory made pressed steel shutter fixed with 1.25mm thick pressed steel frame of 105 x 60mm and as reqd for cupboards (consisting two shutters) including 06 Nos hinges of size 75mm long and Godrej pattern three way locking system with suitable shape & size 12mm dia MS rod & 01 Nos chromium plated handle of size 150mm long with & including two coats of shop spray synthetic enamel painting over a coat of red oxide primer as colour approved by GE. Note 1:Cupboards frame to be fixed with 06 Nos nuts & bolts of dia 12mm & 150mm long at vertical outer edge of cupboards brick wall / concrete surface including making good the distrubed surfaces complete all as specified and directed.2 Front Face shall only be measured for payment purpose.
8	S & F in repair of 18 mm thick PVC solid board for making cupboard with partition and door of approved make complete all as specified and directed byEngr in Charge.
9	S&F 30mmthick factory made wire mesh solid WPC (Wood Polymer Composite) shutter of consisting density of 600 Kg/Cum and door to be panelled with SS mosquito meshaluminium mesh for aditional strength and safety purpose hologram to be clearly visible on material, Manufacture test certificates to be submitted complete all as specified and as directed by Engr-in-Charge. Note : Stainless steel butt hinges and necessary S S screws shall be paid measured separately
10	M&L for cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in filling of pressed steel frame and hold fast block etc.
11	Taking down old rusted & damaged steel windows/ventilators of any description and of any type & size with guard bars / grill including cutting holes for hold fasts & making good the disturbed portion complete all as specified & as directed.
12	S&F factory made mild steel windows (Box Type ) with side hung shutters including glazing bars to receive glass, dovetailed or weldedwith and including necessary welding, reveting, tower bolt, handle, holdfast, hinges and steel peg stay as per Drg No.CEJZ/TD-2013/01 sheet (1/3, 2/3, 3/3). The rates include for painting with 50 micron thickness of powder coated painting over a shop coat of zinc chromate primer with approved colour complete all as specified and directed.
13	S&F steel window box type with side hung shutters Factor made including box type hinges with steel handle and steel peg stay complete w/o glazing bars dovetailed or welded including necessary welding, riveting, tower bolt, handle, holdfast, hinges and steel peg stay. The rates include for painting with 50 micron thickness of powder coated painting over a shop coat of zinc chromate primer with approved colour complete all as specified and directed.
14	S&F steel ventilator with top hung shutter of glazed & gauged including hinges,steel peg stay complete with glazing bars including one shop coat of redoxide primer complete all as specified and directed.
15	M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, hand rails, cupboards frame and similar work con- forming to Fe.290.Gde-E-165 with and including necessary cutting and weldingcomplete all as specified and directed.
16	M&L preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primercomplete all as specified and directed.
17	M&L for preparation of new steel or iron surfaces of any description, over 10 cm width or girthand applying two coats of synthetic enamel paintcomplete all as specified and directed.
18	M&L for preparation of old steel or iron surfaces of any description, over 10 cm width or girthand applying two coats of synthetic enamel paintcomplete all as specified and directed.
19	Supply and fixingacrylic transparent sheets 3mm thick in square / rectangular area of each pane not exc 0.5 sqmand fixed /lock with window frame by using PVC snap beeding with necessary self tapping reveting / screwing or any other suitable methodcomplete all as specified and directed.
20	Supply and fixingacrylic frosted/figured sheets3mm thick in square / rectangular area of each pane not exc 0.5 sqmand fixed /lock with window frame by using PVC snap beeding with necessary self tapping reveting / screwing or any other suitable method complete all as specified and directed.
21	S&F Sheet glass 4.00mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane
22	S&F 4 mm thick figured glass fixed with and including necessary rubber gasket and aluminium beading all as directed
23	S&F Galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples
24	S&Fstainless steel butt hinges medium weight of size 100 mm fixed with stainless screws complete all as specified and directed.
25	S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixingclips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
26	S&F 200mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed.
27	S&F extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed.
28	S&F 100mm long aluminium anodized floor door stopper double legged with rubber shoe, fixed to bottom rail of door complete all as specified and directed.
29	S&F mild steel 300mm, ordinary rat rail rod pattern springs, including roller and roller plate complete all as specified and directed
30	Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.
31	M&L for 100mm thick (1:2:4) Type-B-2 (using 40mm graded crushed stone aggregate) as in Flooring for Garage and ramp complete all as specified and directed.
32	M&L for 75mm thick (1:3:6) Type-C-2 (using 40mm graded crushed stone aggregate) as in plinth protection complete all as specified and directed.
33	M&L for 50mm thick (1:2:4) Type-B-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed by Engr-in-Chargre.
34	M&L for 25mm thick (1:2:4) Type-B-0 (using 12.5mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed by Engr-in-Chargre.
35	M&L for Machine cut kota stone slab flooring 18-20mm thick of size not less than 0.30 Sqm of each slab over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with and including 15mm thick screed bed or bedding in cement mortar 1:6 complete all as specified and directed. (Note : Single piece tiles will be placed on the surface of stair case tread area).
36	M&L for Kota stone slab 15mm thick in riser of bricks steps & riser of staircase , skirting, dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing with & including backing coat in 10mm thick CM (1:3) to receive Kota Stone complete all as specified and directed (Note : Single piece tiles will be placed on the surface of stair case riser area).
37	M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed
38	Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
39	M&L RCC 1:2:4 Type-B1 (20mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like incl necessary forms works complete all as specified and directed.
40	Demolition/ dismantling existing roof treatment complete all as specified & directed.
41	Demolition of mud in roofs, any thickness. Including plastering and leeping (whether full thickness removed or only or part thereof) and removal to a distance not exc 250 mtr complete all as specified and directed.
42	M&L for preparation of roof surfaces (old or new) with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particles with and including providing 50 mm thick (average) PCC 1:2:4 type B-0 (using 20mm graded stone aggregate) with maintain the proper roof slope as in bedding, coping and kerb complete all as specified and directed.
43	M&L for providing 10mm thick polymer modified plaster in ratio 1:10 (1 part of polymer and 10 parts of cement with solid contents not less than 30%) over slab and applying priming coat of epoxy primer with resin and hardner with water dilution as per manufacturer instructions, applying 1st coat of solvent based polyurathene liquid membrane not less than 500 micron thick UV stable having SRI value greater than equal to 105 with consumption of 0.61 Kg/Sqm and applying 2nd coat solvent based polyurathene liquid mambrane not less than 500 micron thick UV stable having SRI value greater than equal to 105 with consumption of 0.61 Kg/Sqm over dried 1st coat complete all as specified and directed.Make : M/s Asian Paints Ltd/ M/s STP Ltd/ M/s Sika India Pvt Ltd or equivalent in list of makes
44	Providing cement concrete 1:2:4 type B-0 using 12.50 mm graded stone aggregate as in roof kerbs complete all as specified and directed.
45	S&F superior qualitySSCurtain rod, 20mm diawith and includingSS bracket 2 Nos of each opening andfency type SSside knobof required shape and size 2 Nos of each opening as approved by Engr- in charge and complete all as specified and directed.
46	Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
47	M & L for Brick work with Fly Ash Bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete andall as specified and directed.
48	M & L for Brick work of Fly Ash Bricks old size, straight or curved on plan to any in half brick thick walls , built in cement mortar 1:4 complete andall as specified and directed.
49	Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc. from wall & ceiling surfaces complete all as specified and directed.
50	M&L rendering 10 mm thick in CM 1:6 on fair face of brick /concrete surfaces of any description and finishing the surfaces even and smooth without using extra cement complete with complete all as specified and directed.
51	M&L for preparing new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer of same make over two coats of wall care putty complete all as specified and directed.
52	M&L for preparing old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer of same makewith and including complete removal of existing treatment of any layer of wall by sanding with internal dust extraction system forclean environmentand complete all as specified and directed.
53	M&L for preparing new plastered or unplastered surfaces of walls and applying three coats of white wash on undecorated surface complete all as specified and directed.
54	M&L preparing old plastered or unplastered surfaces of walls and applying two coats of white wash on old decorated surface with and including complete removal of existing treatment of any layer of wall complete all as specified and directed.
55	M&L for rendering 5mm thick in CM 1:3 as in ceiling/landing etc on concrete surface finish even and smooth without using extra cement complete all as specified and directed.
56	M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash on undecorated surface complete all as specified and directed.
57	M&L for preparing old plastered or unplastered surfaces of ceiling and applying two coats of white wash on old decorated surface with and including complete removal of existing treatment of any layer of ceiling surfaces complete all as specified and directed.
58	Rendering 15mm thick in two layers on fair faces of brick work or concrete surfaces 10mm in CM 1:6 and top layer 5mm thick in CM 1:4 finishing the surface the even and smooth with using water proofing compound complete all as specified and directed (WPC shall be measured and paid seperately). WPC @ 0.20 Liter per 50 Kg of cement.
59	Supply only liquid water proofing compound.
60	M&L for preparing new plastered or unplastered surface of walls and Finishing walls with two coats of Premium Acrylic Smooth exterior paint of required shade having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali &fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm of same make complete all as specified and directed.
61	M&L for Complete removal of existing treatment by sanding withinternal dust extraction system for clean environment, washing down and stopping of distempered and painted surfaces and M&L applying two coats of acrylic smooth exteriorpaint over and incl of a coat of exterior wall primer complete all as specified and directed
62	M&L for complete removal of old decorated, plastered or pointed surfaces of wall by brooming down or steel wire brushing,scrapping down smoke soot moulds, moss and efflorescent, salts and treating oil & greasy spots, washing, rubbing down and stopping of distempered surface, filling of cracks etc and applying two coats of oil bound distemper over a 1 mm thick puttyover a coat of pirmer complete all as specified & directed by Engineer-in-Charge.
63	M&L for writing letters or figures (Block, Roman, Italic or Indian) n. exc. 30 cm high with synthetic enamel paint as required for marking of building numbers all as specified and directed.
64	S&F in repair 15 mm bore bib tap fancy type chromium plated cast copper alloy with cruth or butter flyhandle screwed down for iron pipeand fixed complete.
65	S&F 20 mm dia Stop valves / gate valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedcomplete all as specified and directed.
66	S&F brass chromium plated shower roses of size 125mm with or without swivel joints, any size, including shower arm 15mm size, 195mm long bend of 45degree with flange of CP fixing to steel pipe or union complete all as specified and directed.
67	S&FSS , premium type, peg set 6.heavy weight complete all as specified and directed.
68	S&F in repairs PVC valveless,syphonic action type flushing cistern low level 10 ltr capacity white, with intel, ball valve, float and handle including bracket flushing, bracket flushing pipe complete all as specified & directed.
69	S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm.
70	S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm.
71	S&F 750 x 1200mmwith smooth edges along with fixing accessories of selected quality glass,complete all as specified and directed.
72	S&F in repairs Vitrous china wash hand basin, white, flat back of size 550 x 400 mm white excluding taps,and plug and porcelain stopper but including bracket, cutting for and pinning the ends of brackets, PTMT waste coupling of 32 mm dia (half or full threaded )(Min wt 45 gms /40 mm -60 gms) & waste pipe as suitable complete all as specified and directed.
73	S&F in repair Pillar tap, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts, screwed for iron pipe 15 mm
74	S&F in repair single/multi PVC (SWR) floor trap 75mm dia, palin with grating including joining to waste pipe, fixed in cement concrete type B-1 (1:2:4) using 20mm graded broken stone aggregate complete all as specified and directed.
75	S&F in repair vitreous China, squatting pan, Orissa Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with PTMT trap of suitable size( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc completeincluding provision of cement concrete bedding & making good to floor complete all as specified and directed including taking out old one.
76	Supply & fixing in repair Vitreous China wash down water closet pan (pedestal pattern), whitewith P or S trap with and including plastic water closet seat cover , connection to trap, flushing pipe & anti -syphonage pipe and flushing cistern 10 ltr capacity etc including necessary materials for fittings &making good to floor complete all as specified and directed by Engr-in-Charge.
77	S&F in repair 600mm x 450mm bevelled edge mirror of3mm thick selected quality glass,fixed to wall with 4nos anchor bolt with SS Screws complete all as specified and as directed.
78	S&F chromium plated Tubular towel rail, 18/20mm dia, D type, 60cm long between flanges, fixed with screws complete all as specified and directed.
79	S&F PVC waste pipe 32 mm dia for urinal or wash basin etccomplete all as specified and as directed.
80	S&F 15mm dia CP angle valves complete all as specified and directed.
81	S&F Wall Mixer 3-in-1 System with 115 mm Bend Pipe & Aerator complete all as specified and directed. Make Jaquar cat part No MQT-519KN or equivalent in list of makes
82	S&FCP Central Hole Basin Mixer withPopup waste with 450 mm long mm Long Braided Hoses complete all as specified and directed. Make Jaquar cat part No MQT-519KN or equivalent in list of makes
83	S&F CP Sink Mixer with Swinging pipe spout complete all as specified and directed.Make Jaquar cat part No MQT-519KN or equivalent in list of makes
84	S&F in repair stop valve cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 20 mm bore or union and fixed complete all as specified and as directed.
85	S&F in repairs soap dish any type fixed to plugs with chromium plated brass screws and fixed complete all as specified and as directed.
86	Dismantling of cast iron drain pipe of 100mm dia, jointed in CM and taking out from trenches/walls, if required complete all as specified..
87	Dismantling of cast iron drain pipe of 75mm dia, jointed in CM and taking out from trenches/walls, if required complete all as specified..
88	S&F 110 mm bore PVC (SWR) couplers complete all as specified and directed by Engr-in-Charge
89	S&F 110 mm bore PVC (SWR) reducers complete all as specified and directed by Engr-in-Charge
90	S&F 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed by Engr-in-Charge
91	Supply and fixing in repairs stack clamps out of 50mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100mm bore pipe complete all as specified and directed by Engr-in-Charge
92	Supply and fixing in repairsstack clamps out of 50mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends aof stays to wall or roof for 75 mm bore pipe complete all as specified and directed by Engr-in-Charge
93	S&F110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors withpipe supporting clamping system consists of Mono Brackets +U Bolt Rubber Sleeve mounted system for 110 mm bore PVC (SWR) pipe with wall distance 75mm at a spacing of 2 mtrs complete all as specified and directed.
94	S&F75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors fixing down with pipe supporting clamping system consists of Mono Brackets +U Bolt Rubber Sleeve mounted systemfor 75 mm bore PVC (SWR) pipe running with wall distance 75mm at a spacing of 2 mtrs complete all as specified and directed.
95	S&F 110 mm PVC (SWR) access door bends any radiuscomplete all as specified and directed.
96	S&F 75 mm PVC (SWR) access door bends any radiuscomplete all as specified and directed.
97	S&F 110mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed.
98	S&F 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed.
99	S&F 110mm PVC PVC (SWR) vent cowl complete all as specified and directed.
100	M&L for treatment of sunken floor slab comprising of the following specifications with and including demolition of sunken floors complete all as specifiedand directed:-(i) Cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely.Provision of 40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in padding concrete to achieve proper slope including cutting holes in bricks or RCC wall for spout. Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with and including integral water proofing compound Sika Plastocreat plus or equivalent make in list of makes as approved by GE @ 0.2% by wt of cement consumed including filling it with water to check dampness and seepage and where dampness / seepage is noticed, nozzles shall be fixed and grouting carried out. (iii)All junctions points of side wall where CI/GI/PVC pipes are passing through shall be sealed with epoxy putty Sikaguard 694 F(I) or equivalent make in list of makes as approved by GE. (iv)After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean. (v) Applying two coats of polymer modified cementious water proof coating with Sika Topseal 107 or or equivalent make in Fosroc / Thremax or equivalent in list of makes as approved by GE in two coats @ 3kg/sqm to sanwiched with glass fibre reinforcemnt: Sika Fab-1or equivalent make in list of makes as approved by GE over base coat as per mnaufacturer\"s instruction to bottom and vertical sides up to finished floor level+100mm height.The thickness of two layer shall be 1mm.When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion. (vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound SIKA plastocreat plus or equivalent make in list of makes as approved by GE @ 0.2% by wt of cement consumed as per manufacturer\"s specification including rounding of corners and injuctions sloping towards spout.(vii)Allpipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round after painting with anticorrosive paint .(viii) The sunken floor shall be filled with lean concrete 1:7:12.Note :- Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. Test record for each sunkenslab shall be maintained.The treatment shall be carried out by authorised applicators of chemicals. Cost of testing and all M&L is included in the rates quoted above.
101	S&F in repair 1000 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc complete all as specified
102	S&F20mm bore dia ballvalves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed.
103	S&F20mm bore dia nipple suitable for HDPE water tank (Min weight 15mm-38 gms/20mm-45gms/25mm-65gms)fixed complete all as specified and directed.
104	S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including PTMT waste coupling & waste pipe 900mm long complete all as specified and directed.
105	S&F Kitchen platerackof overall size 750 mm x 600mm x 250 mmcomplete all as specified and directed.
106	S&F corner glass shelf 300mm (with brass brackets) complete all as specified and directed.
107	S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe)
108	Taking up or down carefully steel tubing and connections & making good the disturbed portion including cleaning for refixing or removal to store of size (a) 15mm dia bore
109	Taking up or down carefully steel tubing and connections & making good the disturbed portion including cleaning for refixing or removal to store of size (b) 20mm dia bore
110	S&F GI tubing tubes \"medium grade\" galvanized with all fittings/ connections & fixing done with pipe supporting clamping system consists of Mono Brackets +U Bolt Rubber Sleeve mounted system water supply pipe 15mm / 20mm GI running with wall distance 75mm at a spacing of 2 mtrsand fixed complete to walls and ceiling or laid in floors or including concealing and cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing whereever required\".(a) 15mm dia bore
111	S&F GI tubing tubes \"medium grade\" galvanized with all fittings/ connections & fixing done with pipe supporting clamping system consists of Mono Brackets +U Bolt Rubber Sleeve mounted system water supply pipe 15mm / 20mm GI running with wall distance 75mm at a spacig of 2 mtrsand fixed complete to walls and ceiling or laid in floors or including concealing and cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing whereever required\".(a) 20mm dia bore
112	Re-fixing old 20mm dia steel water GI tube medium grade with all fittings / connections & fixing done with pipe supporting clamping system consists of Mono Brackets +U Bolt Rubber Sleeve mounted system water supply pipe 20mm GI running with wall distance 75mm at a spacig of 2 mtrs in new or old position and fixed with or without concealed to walls, ceiling or laid in floors or including concealing and cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing whereever required\".
113	Supply&Laying of CPVC pipe, SDR 11 , 20mm outer dia & fittings on walls/ceiling or laid in floors or including concealing and cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing whereever required\".
114	S&F Brass Elbow forspecial fitting of20 mm bore CPVC pipe complete all as specified and directed.
115	S&F Brass Tee forspecial fitting of20 mm bore CPVC pipe complete all as specified and directed.
116	Supply and fixing Fiber Glass Reinforced plastic (FRP)Door Frames of cross section 90 mm x 45 mm havingsingle rebate of 32 mm x 15 mm to receive shutter of 30mmthickness.The laminate shall be moulded with fireresistant grade unsaturated polyester resin and choppedmat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs.The frame shall be covered with fiber glass from all sides.M.S. stay shall be provided at the bottom to steady theframe., complete as specified by the manufacturer and as per directions of Engineer-in-charge.
117	Supply and fixing to existing door frames 30 mm thickGlass Fibre Reinforced Plastic (FRP) panelled doorshutter of required colour and approved brand andmanufacture, made from fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks ofseasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames,complete all as specified by the manufacturerand as per directions of Engineer- in-charge.
118	Providing and Erecting steel props (upto Full Height ,Braced at centre ,resting on wedge and block to support the structure provisionally during repair work and maintaining them in position till reqd and as directed.
119	Chipping of loose/ damaged /cracked / previously repaired / delaminated or weak concrete of any thickness by chieseling to expose the sound core concrete where ever required in RCC Column, Chajas, Slabs, Beams, Lintels and to expose rusted reinforcement upto depth n.exc 50mm and disposal of rubbish off the premises to a distance not exc 50 mtrs including cleaning of reinforced concrete surface by air compressor complete all as specified and directed.
120	Supply and apply of rust remover cum passivator to remove rust from existing reinforcement by using product: Rustoff-100of Sika or equivalent make in list of makes as approved by GE, with density 1.01 Kg/ltr at 30 degree celsius and consumption : 0.2 Kg/Sqm/coat complete all as specified and directed.Note: The mtrl to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar).
121	Supply and apply a cement based polymer modified rebar corrosion protection system to existing reinforcement using cement based polymer modified rebar corrosion protection system with consumption : 3.75 kg/Sqm for two coats andProduct requirements: carbonation resistance: 2 mm of SikaTop Armatec®-108 of Sika or equivalent make in list of makes as approved by GE corresponds to 20 mm of normal mortar; bond strength > 1N / Sqmm according to ASTM C 882-78 complete all as specified and directed.Note: The mtrl to be applied thoroughly on exposed rebars only with the help of a brush of suitable size. The area will be measured as length of bar x two times the dia of bar)
122	Providing extra reinforcement with TMT bars as per site design requirement including straightening, cutting, bending, placing in position, binding with GI wire of 18 guage etc complete in all respects. Additional reiforcement with adequate lap length & rings at required spacing shall be tied with existing reinforcement using binding wire or welded complete as per site requirement and directions
123	Providing and fixing rebar of required length & diameter with epoxy resin wherever required in RCC members, including power drilling, cleaning of holes, then rebars should be inserted in holes that should be filled with epoxy to ensure the bond as per manufacturer recommendation complete as per site requirement and directions.(a) 16 mm x 160 mm
124	Providing and fixing rebar of required length & diameter with epoxy resin wherever required in RCC members, including power drilling, cleaning of holes, then rebars should be inserted in holes that should be filled with epoxy to ensure the bond as per manufacturer recommendation complete as per site requirement and directions.(b) 20 mm x 200 mm
125	Providing and fixing shear connectors of 16 mm dia TOR steel upto 160 mm length epoxy resin RCC members including power drilling, cleaning of holes, insertion of epoxy, placing shear connections in position to ensure the bond as per manufacturer recommendation complete as per site requirement and directions.
126	M&L for Providing, mixing & applying two component Epoxy resin concrete Bonding coat on prepared RCC surfaces as per manufacturer\"s specification including prepartion of surface throughly and cleaning complete where ever requiredwith usingProduct: Sikadur®-32 LP of Sika or equivalent in list of makes as approved by GE with Consumption: 0.4 kg/Sqm and Product requirements: Complies with ASTMC 881-78, Type II Grade 2 Class B+C complete all as specified and directed.
127	M&L for providing by mixing and trowel application of prepacked, light weight, two component structural grade polymer modified fibre reinforced thixotropic cement mortar Sika Monotop 122F of Sika or equivalent make in list of makes as approved by GE at an average thickness exceeding 10mm and upto 25mm to the prepared concrete surface in soffit of slabs, beam, columns, parapets, fins and facias at any height, including finishing of applied Polymer mortaras per thetechnical specifications and manufacturer\"s instructions complete all as specified and directed .
128	M&L for weld-mesh of size 50x50x3mm to be wrapped on the exposed surface of rib of beam & on the slab bottom and tack welding to the exposed reinforcement at close intervals and gunite with cement mortar 1:3 mixed with admixture Sika Plasto creat plus or equivalent make in list of makes as per manufacturer\"s instructions as approved by GE around rib of beam or roof slab of thickness n.exc 40mm to be applied under an operating pressure.The gunitedsurface to be cured properly for a min of 7 days all in complete as per thetechnical specifications and manufacturer\"s instructions and directed by Engr-in-Charge.
129	Providing and fixing water tight centering & shutteringand Scaffolding including bolting, strutting, propping etc. including removal of form work from column, beam , slab etc. complete as per site requirement and directions of Engineer-in-charge.
130	Supply and apply a ready to use non shrink, cementitious free flow micro-concrete (<100 mm) using Product: SikaRep® Microcrete-4+ adequate coarse aggregate, Yield: approx 17 Ltr/bag (30 Kg) (depending on the size and quantity of coarse aggregate added), Product : SikaRep® Microcrete-4orequivalent make in list of makes as approved by GE, Product requirements: compressive strength > 60 N/Sqmm (28 days) according to ASTM C 1107-99 complete all as specified and directed.
131	M&L for providing and fixing 12-16mm dia injection ports non returnable nozzle by drilling, cleaning and sealing holes 50-75 mm deep at 200mm c/c with fast setting high strength Epoxy putty, solvent free, three component compound based on epoxy resins, graded fillers and thixotropic agents using Sikadur 31 of Sika or equivalent make in list of makes as approved by GEas in beams, columns, slab and parapets as per the technical specifications and manufacturer\"s instructions complete all as specified and directed.
132	M&L for grouting of nozzles with low viscous moisture insensitive, High strength, epoxy resin grout with Sikadur 52 LP (IN) of Sikaor equivalent make in list of makes as approved by GE with pressure not excedding 2-3 Kgf/Sqcm till the nozzle refuses to take further grout including cutting extra length of the nozzle after the grout hardens and finishes as per thetechnical specifications and manufacturer\"s instructions complete all as specified and directed.
133	Removal of plaster/finishes of the wall patch area observed to expose the brick surface. Cleaning; shifting and stacking debris, necessary lead and lift and disposal of debris outside the premises etc., complete as all as specified and directed.
134	Making the grooves 10mm * 10mm above coating area and fill with SIKAFLEX-127 or equivalent in list of makes, single component, elastic, moisture curing, hybrid moisture curing, hybrid polyurethane based construction sealant and adhesive.
135	Drilling holes at the first joint of masonry wall at ground level horizontally 10mm diameter in masonry structure along the side of the joints at 45 degree so as to cross the brick/block at the intervals spacing in 300 mm depending on extent of rising dampness as per recommendation of Engr-in-charge, cleaning of hole :- Clean the hole by air blower prior to fixing nozzles. Install NRV packer injection packers 10 mm diameter, 10 cm long in the holes and tighten. Fix the packer securely using Sikagard 694 F(I) or equivalent in list of makes and supply and apply of 3 parts, very low viscous elastic polyacrylic injection resin Sika @ Injection 306 or equivalent in list of makes with a versatile and adjustable reaction time having mixed viscosity: 3-11 M pa s at +20 degree C, reaction time : adjustable according to ambient temprature and execution requirement between 8-50 Mins Ph 9-10. Tested as per wissbau No 2002-094- (1A) fuction test with re-injectable hose system. these holes should be drilled until a depth of approx. 5 cm (for a 6cm thick wall) before the end of the wall is reached. Pump Sika @ injection -306 @ at>20 bar into a behind fissures or into masonry joint which are allowing water to infiltrate into unwanted area if voids is masonry being injected contain insufficient moisture to activate the grout inject a small amount of water prior to injecting the grout when movement stop of sika @injection -306 appears at the next packer move to the next packer and inject. if the dampness is heavy inject similarly at next joint line, pumping of sika injection is to done till chemical comes out from adjacent holes. Cutting of packers :- Cut the packers after completion of grouting without damaging structural elements.Note : consumption of all chemicals is deemed to be included in the quoted rate of the contractor, consumption of chemical per hole may vary from 0.5 kg to 1.5 kg.
136	Providing and applying acrylic polymer SikaTop® -107 Seal IN or equivalent in list of makes, 2 component polymer modified cementitious coating of tensile strength of 2.0 N/mm2 as per ASTM D 412 , elongation of 110% as per ASTM D 412, Shore A hardness ~ 90 (ASTM D2240), resisting 5 bars hydrostatic pressure as per EN 12390-8:2019 applied in two coats @ 3kg/sqm over a saturated surface and the interval between each coat of coating application is 6-8 hrs. The 2 coats must be applied at right angle to each other with a brush. Finally sprinking sand over the second coat for better adhesion with plaster
137	Providing and laying of 10 mm thick hand applied Sika Monotop 122F or equivalent in list of makes single component, dual shrinkage compensated, thixotropic high strength formulation trawlable mortar on the brick wall including pointing of brick joint over a bond coat of SIKA Latex or equivalent in list of makes: Water\"cement - 1:4:6 with SIKA Latex or equivalent in list of makes consumption @ 100 gm/sqm or equivalent in list of makes on the wall surface. the PMM should have compressive strength > 50 MPa in 28 days as per ASTM C 109 (7cm cube). (Complete finished item with all leads and lifts) and preparingthe plaster of thickness up to 15mm over the brick masonry surface by providing and applying a bond coat of Sika Latex : Water : Cement - 1:4:6 with Sika Raintite-I consumption @100 gm/sqmor equivalent in lsit of makes on the wall surface followed by hand mix of cementitious mortar 1:4 to be mixed with permeability reducing polymer Sika Raintite-i @ 400gm/sqm (6%) by weight of cementitious content at time of mixing with water as per manufacturer\"s recommendations including all leadlife, levelling the surface, curing etc complete.
138	Removing all disintregated and loose concrete of any thickness incl plaster if any in RCC Column, Chajjas, Slabs, Beams, Lintels etc, removing all loose rust/scale from exposed reinforcement bars by using wire brushes and sand paper incl cleaning of exposed surfaces of reinforcement with protective anti corrosive epoxy bonding chemical (Mate Pidilite) and tide reinforcement bars/IRC fabric 50mm x 50mm x 12 gauge if reqd to reinforcement concrete bond primer to exposed surfaces and applying cement moter 1: 3:4 with MPC (one part cement 3 part sand : 1 part 6mm course aggregate) 2 and average thikness not less than 20mm incl IRC 50mm x50mm)x 12mm gauge or reinforcement bars in the revoving debris all as specified and directed by EIC (Note :Incl necessory scafolding to execute the work )
139	M&L 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base of floors all as specified.
140	Making \"V\" Groove of3 mm wide and 3 mm deep over crack line by electrically operated grinder with diamond concrete saw blade and cleaning it by Air Blower as directed.
141	Supply and apply of rust non shrink repair mortar for non moving cracks in plaster and walls Product Consumption : 25 RMT/Kg for crack size of 6mm x 6mmDensity : 0.85 Kg/l at 27° C
142	Supply and Apply of ready to use water resistant White Cement Based Finishing/smoothing material in 1.5 mm thickness for indoor and outdoor plastered surfaces.Product Coverage :1.2 Kg powder/Sqm/mm thicknessSystem Reinforcement : tensile adhesion > 1.0 N/mm2 at 28 days (According to EN 1348) water capillary Absorption 0.8 ml at 24 Hrs as per Karsten Tube Test, Water Retentivity > 98% (according to EN 196-3)
143	Cutting holes into or through cement concrete slabs and cutting through reinforcement chajjas, etc reinforced or other wise surfical area exc 100 sqcm but n.exc 250 sqcm as directed to insert angle iron for holding chajjas / coller platforms as required complete all as specified and directed.
144	S&F Joist, channel, angle or tee sections, fixed independently, without connecting plates, etc (cut to ordinary lengths i.e. within 20mm of the length indicated), for cooler stand, chajjas complete all as specified and directed.
145	S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall and in chajjas, fixed with self tapping screws complete all as specified and directed.
146	S&F rolled mild steel framed work as in doors or gates of angle or other section conforming to FE-410-W (Gde-E-250) Quality A, with gusset plates, rails braces, etc complete drilled for fixing of sheets and including steel sheeting or other covering and hanging and fixing complete as in garrage door and roof access door complete all as specified and directed.
147	Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises
148	M&L for non- skid ceramic coloured tiles 7 to 8 mm thick area of each tile exc 0.11 sqm but not exc 0.18 sqm and including 15 mm thick bedding to tiles in cement mortar 1:4, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match.
149	M&L non skid coloured designer ceramic tiles7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed with Epoxy to match with and including 15mm thick screed bed in CM (1:6) compete all as specified and directed.
150	M&L for coloured glazed ceramic coloured tiles, designer & pattern (dark & light shade combination) tiles in 450 x 300 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed with Epoxy to match over with and including a backing coat in CM 1:3 and complete all as specified and directed by Engineer-in-Charge.
151	Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar
152	M&L Chequered cement concrete tiles 20 cm X20 cm X 25 mm thick over15 mm thick bedding of CM 1:6 in floors ,set,jointed and pointed in neat cement slurry with grey cement and pigmentand complete all as spd and directed
153	Demolition and breaking up drain pipes (salt glazed ware or RCC or PVC) set in cement mortar 150 mm dia complete all as specified and directed.
154	Demolition and breaking up drain pipes (salt glazed ware or RCC or PVC) set in cement mortar 200mm dia complete all as specified and directed.
155	S&F RCC pipe class NP-2 laid to slope in trenchesjointed and tested complete with collars for 150 mm dia pipe complete all as specified and directed.
156	ditto item No 155 above-but 200 mm dia .
157	M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 150mm dia pipe complete all as specified and directed.
158	M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 200mm dia pipe complete all as specified and directed.
159	Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed
160	Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.
161	Removing excavated material (Soils) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
162	M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete.
163	M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in coping & benching including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work, finished even and smooth using extra cement complete.
164	M&L for precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs for manholes (square / rectangular / circular of any type and size with Angle iron bend to shape of manhole etc, shelves and similar articles with plain faces including necessary formwork and setting in cement mortar 1:6 including necessary use and waste of formwork and demolition of existing RCC cover slabs complete
165	Dismantling plain or corrugated steel sheeting of any type asbestos/steel, any gauge, thickness, including Nainital or similar pattern roof coverings sheets
166	S&F Powder coated Anodised aluminium frame for doors, windows ventilators and partition with one or more rebates including joining cleat for fixing etc. complete all as specified.
167	S&F Powder coated Anodised aluminium door, shutters/partition/ Windows, aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified.Note :(i) Glass panes and wire cloth shall be measured & paid separately . (ii) Rubber beading will not be weighed and not to be paid seperately.
168	S&F Door closer hydraulically regulated of Aluminium (extruded section body), designation No 2, universal type, suitable for door shutter of 701 to 850mm in width and of weight between 36 to 60 Kgs complete all as specified and directed.
169	S&F as inbrass Mortice lock,vertical type, 4 leversize 100 mm
170	S&F sheet glass 4.8 mm thick ordinary quality in squares exc 0.5 sq m each pane all as specified.
171	Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers.
172	Dismantling old u/s kitchen cupbord shutter with frame complete all as specifed
173	S & F 18 mm thickPVC solid board for making modular kitchen cabinet cupboard with partition and door of approved complete all as specified and directed byEngr in Charge.
174	S & F SS plate rack(size- 45 Cm x50 Cm x 20 Cm /4mm dia SS rod)with necessary fitting like slider etc complete all as specified and directed
175	S & F SS Crockery rack (size- 45 Cm x50 Cmx 20 Cm /4 mm dia SS rod with necessary fitting like slider etc complete all as specified and directed
176	S & F SS bottle rack (size-25 Cm x 50 Cmx45 Cm/ 4 mm dia SS rod) with necessary fitting like slider etc complete all as specified and directed
177	S& F 100 long SS fancy type handle complete all as specified and directed
178	S&F for pipe supporting clamping - Single pipe of dia of 110mm (4\") down take pipe fixing done with clamping system consists of profile bracket + continuous slotted C channel + U bolt rubber sleeve mounted system running vertically with wall distance 7mmm (3\")Pipe support clamping made of :1. Profile bracket having wall distance 75mm (3\") made of low carbon Hot Roll Gauge corrected Oil Pickled and Drawn (HROP D) steel (IS 1079) ; material size 32mm x 3mm with ribs and notch or hot dip galvanized + Zn Al Flake coated having salt spray test (test method - ASTM B -117 - 2019) result 2000 hrs with SS304 Hex flange bolt with serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921 an SS304 Hex Flange Nut BSW 5/16 x 18 x8 x 13 with serration as per DIN 6923.2. Continuous slotted \"C\" channel with ribs to be used of size 50mm (10\") made of low carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hott Dip Galvanized + Zn Al Flake coated with material thickness of 3mm.3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7mm approx ; Zn AlFlake coated with noise absorbing semi transparent ribbed silicon rubber sleeve ; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13with Serration set as per DIN 6923 - Zn Al Flake coated.Hotdip Glavanizing: As per IS 69 (1985) - 610 grams /m2 (>85 microns ).Material Grade : IS 1079 used as per MTC confirms to En 10204 3.1.Material Qty for one unit : 1. Profile bracket wall distance 75mm (3\") - 2 Nos ..Continuous slotted C channel of size 250 mm (10\") - 1 No ; 3. U Bolt Rubber sleeve mounted for 110mm (4\") CI or PVC pipe dia . -1 NO ; and 4. Fixing nail Zn coated of thickness 6.5mm and length 63mm (21/2\") - 4 Nos.Fixing Details : Pipe support clamping unit to be fixed at every metre distance in the duct as specified in chief Engineer Jaipur Zone Techical Drawing of Factorymade Pipe Supporting System no TD/20/01.
179	S&F for pipe supporting clamping - Single pipe of dia of 75mm (3\") down take pipe fixing done with clamping system consists of profile bracket + continuous slotted C channel + U bolt rubber sleeve mounted system running vertically with wall distance 7mmm (3\")Pipe support clamping made of :1. Profile bracket having wall distance 75mm (3\") made of low carbon Hot Roll Gauge corrected Oil Pickled and Drawn (HROP D) steel (IS 1079) ; material size 32mm x 3mm with ribs and notch or hot dip galvanized + Zn Al Flake coated having salt spray test (test method - ASTM B -117 - 2019) result 2000 hrs with SS304 Hex flange bolt with serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921 an SS304 Hex Flange Nut BSW 5/16 x 18 x8 x 13 with serration as per DIN 6923.2. Continuous slotted \"C\" channel with ribs to be used of size 50mm (10\") made of low carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hott Dip Galvanized + Zn Al Flake coated with material thickness of 3mm.3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7mm approx ; Zn AlFlake coated with noise absorbing semi transparent ribbed silicon rubber sleeve ; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13with Serration set as per DIN 6923 - Zn Al Flake coated.Hotdip Glavanizing: As per IS 69 (1985) - 610 grams /m2 (>85 microns ).Material Grade : IS 1079 used as per MTC confirms to En 10204 3.1.Material Qty for one unit : 1. Profile bracket wall distance 75mm (3\") - 2 Nos ..Continuous slotted C channel of size 250 mm (10\") - 1 No ; 3. U Bolt Rubber sleeve mounted for 110mm (4\") CI or PVC pipe dia . -1 NO ; and 4. Fixing nail Zn coated of thickness 6.5mm and length 63mm (21/2\") - 4 Nos.Fixing Details : Pipe support clamping unit to be fixed at every metre distance in the duct as specified in chief Engineer Jaipur Zone Techical Drawing of Factorymade Pipe Supporting System no TD/20/01.
180	S&F for pipe supporting clamping - Single pipe of dia of 20mm(3/4\") down take pipe fixing done with clamping system consists of profile bracket + continuous slotted C channel + U bolt rubber sleeve mounted system running vertically with wall distance 7mmm (3\")Pipe support clamping made of :1. Profile bracket having wall distance 75mm (3\") made of low carbon Hot Roll Gauge corrected Oil Pickled and Drawn (HROP D) steel (IS 1079) ; material size 32mm x 3mm with ribs and notch or hot dip galvanized + Zn Al Flake coated having salt spray test (test method - ASTM B -117 - 2019) result 2000 hrs with SS304 Hex flange bolt with serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921 an SS304 Hex Flange Nut BSW 5/16 x 18 x8 x 13 with serration as per DIN 6923.2. Continuous slotted \"C\" channel with ribs to be used of size 50mm (10\") made of low carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hott Dip Galvanized + Zn Al Flake coated with material thickness of 3mm.3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7mm approx ; Zn AlFlake coated with noise absorbing semi transparent ribbed silicon rubber sleeve ; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13with Serration set as per DIN 6923 - Zn Al Flake coated.Hotdip Glavanizing: As per IS 69 (1985) - 610 grams /m2 (>85 microns ).Material Grade : IS 1079 used as per MTC confirms to En 10204 3.1.Material Qty for one unit : 1. Profile bracket wall distance 75mm (3\") - 2 Nos ..Continuous slotted C channel of size 250 mm (10\") - 1 No ; 3. U Bolt Rubber sleeve mounted for 110mm (4\") CI or PVC pipe dia . -1 NO ; and 4. Fixing nail Zn coated of thickness 6.5mm and length 63mm (21/2\") - 4 Nos.Fixing Details : Pipe support clamping unit to be fixed at every metre distance in the duct as specified in chief Engineer Jaipur Zone Techical Drawing of Factorymade Pipe Supporting System no TD/20/01.
181	M&L Black Granite(of any type), 20 mm thick machine cutlaid over cement screed as in Cooking Plateform & clothing store and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the granitestone including cutting and polishingwith and including 15mm thick (1:6) screed bed or bedding in cement mortar 1:6 complete all as specified and directed.
182	Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
183	Dismantling structural steel work including doors, gates, rolling shutters but excluding framed truss etc.
184	Supply & fixing steel rolling shutters, thickness of laths 1.00 mm, with ball bearings gear operated type with bevel gear box and crank handle and safety lever locks mild steel with 4 levers for rolling shutters as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position as indicated, complete, push pull or manual type, with safety lever locks mild steel with 4 levers, complete all as specified and as directed.
185	Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases, landings and chajja complete and removal to a distance exc 500 m but not exc 1.5 km all as specified and as directed
186	M&L for reinforced cement concrete type(design mix) M-25 (20mm graded aggregate)in beam, cantilevers, lintels etc and the like as specified.
187	M&L for reinforced cement concrete type (design mix) M-25 (20mm graded aggregate)in slabs supported on walls, beams and columns in floor landing and the like as specified.
188	S/F 10 mm dia and over TMT bars cut to length, bend to shape required including cranking, bending, spirally for hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specifed and directed.
189	All as per itemabove but 5mm dia and over up to and incl 10mm dia in stirrups, spacers and binders.
190	Use & waste of form work for fair finished flat surfaces of concrete in beams, lintels incl support etc.
191	All as per item no 190 above but to soffits of suspended slabs, landing & similar works n.exc 200 mm thick etc and finishing fair surfaces complete all as specified and as directed by Engineer-in-Charge
192	Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide
193	M&L for 10 mm thick rendering on fair faces of concrete surfaces in CM 1:6 and finished even and smooth without using extra cement as specified and directed by EIC.
194	All as per item no 193 above but 5mm thick rendering in CM 1:4 on ceiling.
195	M&L for preparing new plastered or unplastered surfaces of ceilings and applying three coats of white wash on undecorated surface complete all as specified and directed.
196	M&L for preparing new plastered or unplastered surfaces of walls and applying three coats of white wash on undecorated surface complete all as specified and directed.
197	M&L Stone sett flooring with stone setts of size 200 to 250mm long, 150 to 200mm wide and 150mm deep and sides dressed; bedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush complete all as specified and directed
198	M&L Stone sett flooring with stone setts of size 200 to 250mm long, 150 to 200mm wide and 150mm deep and sides dressed but except stonebedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush complete all as specified and drected.
199	M&L Edge stones to flooring with stone setts of size 250 to 300mm long x l50 to 200mm wide, and 450mm deep bedded in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush complete all as specified and directed.
200	Dismantling Wall and ceiling boards (fibre, pulp, insulation,etc.) or insulation boards/slabs/ blankets, any thickness,including cover fillets
201	S&F for aluminium anodised snap grid frame work for false ceiling for size of grid 605X605 mm including necessary notching and prepare holes, supportinghanger comprising of MS rod J bolts with frame work to ceiling and to the snap grid 12 mm thick half perforated low density particle board / tiles 60cm X60cm in size fixed with staples all of directed for gridall as specified and directed.
202	M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion2.25 litres per linear metre including drilling and plugging holes etc. in apron. complete all as specified and as directed by Engineer-in-Charge
203	M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existingfloors complete all as specified and as directed by Engineer-in-Charge
204	Taking down carefully copper/aluminum point wiring (light/fan/socket or power) complete including taking out existing unserviceable terminal boxes & conduitwith switches/sockets/fan regulators and fittings such as ceiling rose, pendants, tube light fittings, lamp holders, brackets light fittings, rectangular blocks etc. and making good disturbed surface of walls, floors etc. to match with the existing surface etc complete all as specified and directed.
205	Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades including regulatorand deposit to MES store yard of AGE E/M GE Hisar complete all as specified and as directed.
206	Taking down carefully copper/aluminium Sub main wiring of any size fromsurface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.
207	M&L for point wiring for one light point controlled by one, one way switch with 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.50 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including concealed PVC rigid non metallic conduit 20mm dia medium grade (ISI marked) with all fittings such as tees, bends etcincluding modular press steel with cover plate and frame, complete, all as specified & directed.
208	All as per item No.207 (here-in-before)but one Fan/exhaust fan pointcontrolled by one Number one way switch complete all as specified and directed
209	All as per item No. 207 (here-in-before)but for one 5 Amp socket outlet on independent board controlled by one Number one way switch on independent board.
210	All as per item No. 207 (here-in-before) but for one 5 Amp socket outlet on the same board controlled by one Number one way switch on same board.
211	All as per serial item No. 207 (here-in-before) but for one bell/buzzer point controlled by one bell push
212	All as per serial item No. 207 (here-in-before) but for One Light point controlled by two, two way switches with cables 1.5sqm size.
213	AllaspersrlitemNo.207(here-in-before) but for 15 Amp socket out let by using 2.50 sqmm PVC insulated unsheathed copper conductor cable FRLS multi strand on independent boardincluding provn of2.50 Sqmm unsheathed, multi strandedcopper conductor cable FRLS continues as earth wire connected to earth dolly etc complete all as specified and directed.
214	S&Fmodular type switch piano, flush type, single pole, one way, 5/6 Amp, 230 Volts all as specified & directed.
215	S&F modular typeswitch piano flush type, single pole, one way, 15 Amp, 230 Volts.
216	Supply and fixing modular type switch 2 way 6amp, 230Volts 1 modlecomplete all as specified and directed
217	Supply and fixing modular type bell push , 5 Amp 240 Volts.
218	S&F modulartype socket outletmultipurpose 3 Pin 5/6 Amp (with 2 pin outlet also) 230 volts AC complete all as specified and directed.
219	S&F modulartype socket outletmultipurpose 3 Pin 15/16 Amp (with 3 pin 5/6 Amp outlet also) 230 volts AC complete all as specified and directed.
220	S&F ceiling rose surface bakelite 65mm x 50mm, 3 terminalswith back plate etc complete all as specified and directed.
221	S&F in repair of modular type ceiling fan regulator electronic step type of suitable wattage, 230V suitable for 1200/1400 mm ceiling fan etc complete all as specified and directed.
222	Supply and fixing LED lights fitting 1x 20W, 220V,AC wall mounted aluminium LED batten (4FT)withhigher efficacy & integrated electronic driver with efficacy of 100lumen/W connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
223	S&F LED light fitting mirror type with high out put diffuser, 2 Feet, 10 Watt Cap, 220 V AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size all as specified and directed.Make : Cat Part No LTTB2F10WLEDEW BATTEN of C&S or equivalent in list of makes
224	S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.
225	S&F in reapir of street light LED light fitting 35 watt, pressure die cast housing with epoxy powder coating, IP65, connected with and including 0.5 sqmm flexible copper multistranded conductor cable including security light bracket made to shape out of GI pipe 40mm dia light grade 1.5m length and fixed with MS clamps of size 40x5mm - 2 Nos, nuts, bolts and washers fixed on wall all as specified and directed.
226	S&F in repair of MCB single pole, 240 volts, 6 Amps to 32 Amp breaking capacity 10KA complete all as specified and directed.
227	S&F in repair of M.C.B. SPN, 240 Volts, 40 -63 Ampsbreaking capacity 10 KA complete all as specified and directed.
228	S&F in repair of M.C.B. TPN, 240 Volts,63-100 Ampsbreaking capacity 10 KA complete all as specified and directed.
229	S&F in repair of sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed.
230	S&F in repair of sheet metal enclosure MCB DB SPN 6 way with 200 amps rated bus bar 240 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed.
231	S&F in repair of sheet metal enclosure MCB DB SPN 4 way with 200 amps rated bus bar 240 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed.
232	S&F in repair of sheet metal enclosure MCB DB TPN 6 way with 200 amps rated bus bar 240 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed.
233	S&F in repair of sheet metal enclosure MCB DB TPN 4 way with 200 amps rated bus bar 240 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed.
234	M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.0 mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt and electrode to galvanised earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel protected by galvanised iron light grade 15 mm dia pipe and GI Pipe 20 mm light grade for water filling including 15x20 mm reducer socket funnel wire mesh, RCC cover PCC chamber pit with PCC (1:3:6) type C-2 excavation and earth work, disposal of surplus spoil, to a distance not exceeding 50 mtrs all as specified and shown on electrical plate No. 5 of 1991 (Part-I) including taking out old existing earthing complete all as directed.
235	Supply and fixing ceiling fans (Copper winding) complete with blades, down rods and accessories, 230V, 1200mm sweep , min air delivery 210 CFM ,BEE five star rated with brushless direct current motor(BLDC)with remote complete all as specified and directed
236	S&F down rod suitable for ceiling fans for extension from ceiling of 1meter length complete all as specified and directed by Engr-in- Charge.
237	M&L in repair of sub main wiring using two single core 4.0 sqmm FRLS PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawing PVC conduit (as required & directed by Engr-in-Charge) accessories like bends, tee, etc. and connecting to earth dolly and including 4.0 sqmm earth wire, PVC insulated & unsheathed all as directed.
238	M&L in repair of sub main wiring using two single core 6.0 sqmm FRLS PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawing PVC conduit (as required & directed by Engr-in-Charge) accessories like bends, tee, etc. and connecting to earth dolly and including 6.0 sqmm earth wire, PVC insulated & unsheathed all as directed.
239	Supply and fixing exhaust fan, made out of sturdy Engineering Plastic AC single phase, 230 Volts of size 250 mm sweep with blades, frame and louvers complete all as specified and as directed by Engg-in-charge.
240	S&F Bell ding dong type, AC, 230 Volts, single pole.
241	Supply and fix modular lamp holder, insluated body, with modular straight back plate suitable for batten fittings & complete all as specified & directed
242	Refixing only ceiling fan/ exhaust fan of any sweep complete with all necessary electrical connections from ceiling rose to fan, fan blades Hisar complete all as specified and as directed.
243	Taking down hot water geyser of capacity25 after disconnecting all necessary electrical/Mechanical connections from MCB Box/Switch Board/wall nut &bolts and deposit to MES store yard of AGE E/M GE Hisar complete all as specified and as directed.
244	Refixing ofhot water geyser of capacity25 and connecting all necessary electrical/Mechanical connections to MCB Box/Switch Board/wall nut &bolts and collect from MES store yard of AGE E/M GE Hisar complete all as specified and as directed.
245	PVC connection 450mm longwith PTMT nuts at either ends suitable for inlet connection 15mm bore (for Hot water and Cold water for Geyser)

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Haryana Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Special Repairs To Certain Otm Accn At Hms Under Ge East Hisar And Ge West Hisar, Hisar-Haryana

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Special Repairs To Certain Otm Accn At Hms Under Ge East Hisar And Ge West Hisar, Hisar-Haryana

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us