|
| 1 | Demolition of reiforcedConcrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 2 | Demolition of brickwork masonary built in lime or cement mortar including all quiens arches, pillars etc but including concrete articles complete all as specified and directed |
| 3 | Taking down chowkhats or frames with shutters(without taking off shutters from the frame) area exc.1.5 sqm each not exc. 4.00 sqm each complete all as specified and directed |
| 4 | M&L for 30 mm thick flush shutters with block board core & plywood face panels commercial type on both face complete all as specified and directed. |
| 5 | S&F for 35 mm thick factory made 2nd class hard wood glazed and skeleton shutters, open repeated and prepared to receive glass, gauze etc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR part-I section 8,clause 8.24(a) and for door and fixed with chowkats,chemically pressure treatedcomplete all as specified and directed. |
| 6 | S&F for 125x60mm Pressed steel frames for doors withdoublerebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as per manufcaterer instruction complete all as psecified and directed |
| 7 | S&F for Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube with wooden grain printed PVC sheet used inserted ofcolour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed. |
| 8 | S&F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick 3D wood grain Moulded PVC Sheet Polyurethane dark painted on the both face & 2mm prelam PVC dark Sheet on both face complete all as specified and directed |
| 9 | S&F for 100 mm long stainless steel butt hinges with steel pin complete all as specified and directed. |
| 10 | S&F for 200mm long anodised aluminiumbarrel tower bolt of extruded section complete all as specified and directed. |
| 11 | S&F for 300mm long, aluminium alloy, anodised aldrop door bolt including fixing clips of sheet, cast or exturded section complete all as specified and directed. |
| 12 | S&F for 150mm long aluminium alloy floor door stopper ,fabricated type complete all as specified and directed. |
| 13 | Dismantling of floor hearth or wall tling including cement mortar bedding (but not backing), removing servicesable tiles to store and rubbish off the premises complete all as specified and directed. |
| 14 | M&L for double chargered vitrified coloured tiles 7 to 8mmthick (square/ rectangular) polished dark coloured, area of each tiles 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick (1:6) for laying floor finishes complete all as specified and directed. |
| 15 | M&L for glazed ceramic coloured wall tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified and directed. |
| 16 | M&L for non skid joint free coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed. |
| 17 | M&L for 18 to 20 mm thick machine cut kota stone as in riser of step,dado and skirting over and including 10 mm thick 1:4 CM backing on vertical surface of wall with rubbing and mirror polishing finished complete in repairs all as specified and as directed. |
| 18 | M&L forrubbing,grinding and mirror polishing finished of kota stone or white marble complete in repairs all as specified and directed. |
| 19 | M&L for Granite (of any type) work 20mm thick (table rubbed and polished) including the screed bed in steps, jambs, pillars, window- cills, cooking platformsand like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.including with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed. |
| 20 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations compete all as specified and as directed. |
| 21 | Taking down chowkhats or frames with shutters(without taking off shutters from the frame) not exc. 1.5 sqm each complete all as specified and directed |
| 22 | M&L for factory made uPVC white color sliding window three track made of extruded profiles with wall, thickness of profiles not less than 2.3mm with hollow section with multi chamber.Frame (88mm x 52mm), sliding sash (42mm x 67mm) interlock (One vertical length in each shutters 45.5mm x 28mm), glazing bead (24.5mm x 16mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc, making arrangement for fixing of hardware, EPDM gasket, 1.2mm +/- 0.2 mm thick galvanised steel frame (30mm x 18mm) of 2 Nos, sliding sash (30mm x18mm) sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners hardware touch lock of zinc alloyed (white powder coated) steel roller system.Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and required accessories and 5.0 mm thick coloured glass pans complete all as specified and directed. |
| 23 | S&F in galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed. |
| 24 | S&F including fabrication of framed work such as in grills, grating ,hold fast of door and window chowkat etc., with ends of bars shouldered and or riveted or forget into spikes, frames guard bars, barred iron doors, and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed |
| 25 | M&L for 1000 ltr rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed |
| 26 | S&F for 20mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed (minimum weight 20mm-210 gms) complete all as specified and directed |
| 27 | S&F in repairs 15mm bore GI tubes \"medium grade\" galvanised with all fittings and fixed to walls and ceiling or laid in floor complete all as specified and directed |
| 28 | S&F in repairs 20mm bore GI tubes \"medium grade\" galvanised with all fittings and fixed to walls and ceiling or laid in floor complete all as specified and directed |
| 29 | S&F for 18 mm thick 100% Solid PVC Laminated Board of required size comprising of virgin PVC resin of K Valve 57-60 (Suspension Grade),Calcium Carbonate and natural fibers ( Wood powders/rice husk/Wheat husk) and non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with having minimum density not less than 650 kg/cbm having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compressive of 50 N/mm2, Modulus of elasticity 850 N/mm2 and resistance of spread of flame of Class A category with property of being Termite/Borer Free, Water/Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter complete all as per specified and directed.Note : Material test certificate and authentication should beprovided by the manufacturing company. |
| 30 | S&F for Stainless steelauto closing hinges openable at 0 degree for kitchen cabinet shutters complete all as per specified and directed. |
| 31 | S&F of stainless steel handles 150 mm sizefor cabinet shutters complete all as per specified and directed. |
| 32 | S&F in repair 20 mm dia Stainless steel curtain rod of wall thickness not less than 1mm with both side decorative brakets and fixing brakets complete all as specified and specified. |
| 33 | M&L for RCC 1:2:4 nominal mixed using 20 mm graded stone aggregate as in chajja/latak etc and the like, complete all as specified and directed. |
| 34 | M&L for RCC 1:2:4 nominal mixed using 20 mm graded stone aggregate as in slabs supported on walls, roof beams etc and the like, complete all as specified and directed. |
| 35 | Use and waste form work to sides and soffit of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc rough finished complete all as specified and as directed |
| 36 | S&F for TMT bars of 10mm dia and over in reinforcement cut to length bent to shape required including cranking bending and binding with mild steel annealed wire not less than 0.90 mm dia or securing with clips and as straight in groves complete all as specified and directed. |
| 37 | M&L for brickwork with fly ash bricks (old size), straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed |
| 38 | Taking down cement plaster/terrazzo/tiles etc on brick wall or stone wall etc, including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed |
| 39 | M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work finished even and fair without using extra cement complete all as specified and as directed |
| 40 | M&L for rendering 15mm thick in CM 1:4 on brick or concrete surface,finished even and fair complete all as specified and directed. |
| 41 | M&L for rendering 10mm thick in CM 1:3 on ceiling ofbrick or concrete surface,finished even and fair complete all as specified and directed. |
| 42 | M&L for Preparation of newaly plaster surface of wall and applying two coats of oil bound distemperon 1 mm thk wall putty complete all as specified and directed. |
| 43 | M&L forpreparation of newsurface of wall and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coatof exterior primer applied @ 2.20 kg/10 sqm) external paint over a coat of putty complete all as specified and directed. |
| 44 | M&L for Preparation of newly plastered surface of ceiling and applying two coats of white wash complete all as specified and directed |
| 45 | M&L for preparing old decorated surfaces of wall and applying two coats of oil bound distemper with 1mm thick birla wallputtywhite or tinted complete all as specified and directed. |
| 46 | M&L for complete removal ofpreparation of old decorated surface of wall and Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coatof exterior primer applied @ 2.20 kg/10 sqm) external paint over a coat of putty complete all as specified and directed. |
| 47 | M&L for Preparation of old plastered surface of ceiling and applying two coats of white wash complete all as specified and directed |
| 48 | M&L Preparation of old painted surface of steel surfaces (previously decorated) painting with one coat of synthetic enamel paint with paint sprayer machine on old steel surfaces for grills, guard bars ,shutters etc complete all as specified and directed. |
| 49 | M&L for preparation of newly steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer with paint sprayer machine, complete all as specified and directed. |
| 50 | Demolition of plain cement concrete in any position including tar felt & cement mortar bedding etc from roof or sunken complete all as specified and directed. |
| 51 | Complete removal of mud phuska from roofs of any thickness and removing the waste material from site to a distance exc. 250m but not exc. 500m and deposited where directed including cleaning of surface complete all as specified and directed. |
| 52 | Dismantaling ofbrick tiles or terracing tiles, single layer on roofs complete all as specified and directed. |
| 53 | M&L for plain cement concrete 1:2:4type B-0 (12.5mm graded stone aggregate) as in roof padding,roof kerbs, benching on roof slab and other similar works laid as per slop required finished even and fair complete all as specified and directed. |
| 54 | M&L for 10mm thick plaster in CM 1:3, mixed with liquid water proofing compound over concrete surface of roof when concrete is green complete all as specified and directed. |
| 55 | Cleaning the dust,durt and any other foreign material from roof surface and applying a coat of bituminous primer @ 0.40 ltr / Sqm uniformily and primer shall be allowed to dry over night as conforming to IS 3384-1986 complete all as specified and directed. |
| 56 | M&L for Laying of 3mm thick APP membrane of (reinforced with non-woven fabric polyester type) (weight not less than 3 kg per sqm) shall be done using butane torch maintaining 100mm ie overlap and 150mm end overlap,sealing all overlaps and bonded to the surface by fusing and bonding torchon method complete all as specified and directed. Note: All water proofing work shall be done as per manufacturer instruction and under supervision of manufacturer technical representative. |
| 57 | Supply only Liquid water proofing compound (ISI marked) complete all as spesified and directed. |
| 58 | M&L for 40mm thick brick tiles laid over and including 20mm thick screed bed in CM 1:4 mixed with polymer based liquid water proofing additive @ 2 % by weight of cement and the joints of tiles shall be filled with CM 1:3 mixed with crude oil as per SSR-2009 (Part-I) on non assesible roof area complete all as specified and directed. |
| 59 | Refixing only40mm thick brick tiles laid over and including 20mm thick screed bed in CM 1:4 mixed with polymer based liquid water proofing additive @ 2% by weight of cement or as per manufacturer\"s instruction and the joints of tiles shall be filled with CM 1:3 mixed with crude oil as per SSR-2009 (Part-I) on non assesible roof area complete all as specified and directed. |
| 60 | M&L for Sunken floor treatment as in following sequence:- (a) The surface of Sunken floor is to be properly cleaning the dust,durt and any other foreign material,fungus moss etc from the surface. (b) M&L for 10mm thick plaster in CM 1:3, mixed with liquid water proofing compound over concrete surface of sunken area when concrete is green. (c) Applying a coat of bituminous primer @ 0.40 ltr / Sqm uniformily and primer shall be allowed to dry over night as conforming to IS 3384-1986. (c) M&L for APP based polymeric water proofing membrane of 3mm thick (reinforced with non-woven fabric polyester type) (weight not less than 3 kg per sqm) shall be done using butane torch maintaining 100mm ie overlap and 150mm end overlap,sealing all overlaps including at all junction and corners with bonded to the surface by fusing and bonding torchon method complete all as specified and directed. |
| 61 | M&L for cement concrete 1:5:10, type E-2 (40 mm graded aggregate) as in sunken filling and mass concrete works complete all as specified and directed. |
| 62 | M&L for 40 mm bore galvanised steel tubes \"medium grade\" as in sunken spout pipe complete all as specified and directed. |
| 63 | S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etc and lime concrete bedding complete all as specified in SSR and including \"P\" or \"S\" trap complete all as specified and directed. |
| 64 | S&F in repairs vitreous China white wash down water closet pan (pedestal pattern) including fixing bolts,plastic water closet white. seat cover clossed pattern with flat bottom (white colour) and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed. |
| 65 | S&F for in repairvitreous china wash and basin, white, flat back, size 550 mm x 400 mm fixed on MS bracket including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, waste fitting,pipe and union complete all as specified and directed. |
| 66 | S&F for waste coupling 32mm size full thread with 130mm height complete all as specified and directed. |
| 67 | S&F for bottle trap (with internal partition ) 32mm size with 300 mm & 190 mm long wall connection pipes & wall flanges complete all as specified and directed. Make :Jaquor Cat part ALD-CHR-769L300X190 or equivalent as per approved make list. |
| 68 | S&F in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including ball valve float & handle, waste pipe & brackets complete set all as specified and directed. |
| 69 | S&F in repair vitreous china Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including 32mm dia CP coupling, CP urinal spredar with CP pipe up to angle cock, waste pipe etc with all fixing arrangement and pointing around urinal back complete all as specified and directed. |
| 70 | S&F in repair Wall mixer with provision for overhead shower with 115 mm bend pipe on upper side,connecting legs and wall flanges complete all as specified and directed. Make : Jaquorcat part COP -273PM or equivalent as per approved make list. |
| 71 | S&F for Maze overhead shower 200x200 mm square shape single flow (body & face plate SS with chrome finish) with rubit cleaning systemcomplete all as specified and directed |
| 72 | S&F for shower arm 20 mm dia and 450 mm long round shape with 90 degree bend for wall mounted shower with flangecomplete all as specified and directed |
| 73 | S&F in repairs 600 mm long tubular towel rail , brass chromium plated of 20 mm dia complete all as specified and directed. |
| 74 | S&F in repair urinal spreader with CP connection pipe complete all as specified and directed |
| 75 | S&F in repairs bevelled rounded edge mirror of 5.00 mm thickglass , with stainless steel screwcomplete all as specified and directed. |
| 76 | S&F in repairs Stainless steel grating dome 100 mm dia with or without waste holes as required complete all as specified and directed |
| 77 | S&F in repair health faucet with flexible pipe of one mtr length including wall hook for EWC complete all as specified and directed. |
| 78 | S&F in repair flushing jet spray for pedestal pattern EWC including 1.00 m long flexible pipe and brass chromium plated nuts complete all as specified and directed. |
| 79 | S&F in repair 32 mm bore low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm white in colour fixed in repairs to walls or laid in floors including all fittings such as bend, elbow, tee etc complete all as specified and directed |
| 80 | S&F for angular stop cock with wall flange complete all as specified and directed. Make :Jaquor Cat part OPP-CHR-15053PM or equivalent as per approved make list. |
| 81 | S&F in repair for 15mm bore bib taps chromium platedwith crutch or butterfly handle, screwed down , screwed for iron pipes or brass ferrulecompleteall as specified and directed. |
| 82 | S&F in repair 15 mm bore CP central hole basin mixer (swan neck/head type) with regular spoutfancy type, castcopper alloy with capstan heads,long screwed shanks and fly nuts screwed for iron pipe fixed complete all as specified and directed. |
| 83 | S&F fortwo way bib cock/angle valve with wall flange complete all as specified and directed. |
| 84 | S&F fortoilet paper holder with flap complete all as specified and directed |
| 85 | S&F for corner glass self (with bracket)complete all as specified and directed. |
| 86 | S&F for towel ring complete all as specified and directed |
| 87 | S&F in repair rotational moulded polyethylene water storage tank of capacity 1000 ltr (Cylindrical/vertical with closed top) three layer construction, ISI marked hoisted & fixed in position including dismantling of old tank and removing from site complete all as specified and directed. |
| 88 | S&F in repair ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20mm bore minimum weight 210 gms complete all as specified and directed. |
| 89 | S&F in repair 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 90 | S&F in repairs 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trench complete all as specified and directed. |
| 91 | S&F in repairs 75 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trences complete all as specified and directed. |
| 92 | S&F in repair 110 mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 93 | S&F in repair 75 mm bore PVC (SWR) bend any radius complete all as specified and directed. |
| 94 | S&F in repair 110 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed. |
| 95 | S&F in repair 75 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed. |
| 96 | S&F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating incl joinig to waste pipe with solvent cement joint dia of outlet 75 mm bore complete all as specified and directed. |
| 97 | Cutting holes into existing manhole brick wall manhole built in CM, connection new drains making good to pipes and rendering cuttting out existing benching for and forming branch channel ( 1/2 round or 3/4 section) in cement concrete (1:2:4) type B1 smooth finished and reforming benching as requiredfor intenal dia of pipe 150mm complete all as specified and directed |
| 98 | M&L PCC type B-1 (1:2:4) using 20 mm graded stone aggregate as in coping in lintels upto 1.5m clear span, cills, steps; seismicand other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, watertroughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed |
| 99 | Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 100 | M&L for PCC type E-2, 1:5:10 using 40mm graded stone aggregate as in sub base complete all as specified and directed |
| 101 | M&L for 80mm thick M-40 grade factory made rubber moulded vaibratory cement concrete coloured interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 25mm thick sand cushion and joints filled with sand complete including dismantling of tiles all as specified and directed. |
| 102 | Taking down carefully aluminium / copper point wiring any type for one light , fan, socket power point or buzzer controlled by one switch complete including fitting / fixtures such as switches, ceiling roses, holder, socket, light fitting etc; for creditand making good disturbed surfaces of walls, ceilings etc complete all as specified and directed |
| 103 | M&L for point wiring with concealed in wall 1.5 sqmm (nominal area) FRLSH PVC insulated stranded copper conductor single core including non metalic PVC conduit medium grade of appropriate size concealed in wall and modular sunken box, cover plate/frame any module as required at site with all accessories as specified including 1.5 Sqmm FRLSH PVC insulated unsheathed multistranded copper earth conductor to common earth and connected to earth dollyfor fan / light / exjaust fan/ bell point controlled by one switch and single conduit shall be used for each circuit complete all as specified and directedNote:- 1. Cost of PVC conduit, with connected item to be included in the quoted rate.2. M&L for cutting chases on walls / ceilingand making good disturbed surfaces including finishing with cement mortar (1:3) etc; are deemed to be included in the quoted rate.3. Modular metal box, cover plate & frame for any module to be included in the quoted rate. |
| 104 | Description same all as per item No. 104 here-in-above but for 3 pin 5 Amps switch socketon independent board with 1.5 sq mm copper cable complete all as specified and directed |
| 105 | Description same all as per item No. 104 here-in-above but for 3 pin 15 Amps switch socket n on independent board with 4 sq mm copper cable including 4 Sqmm FR PVC insulated unsheathed multistranded copper earth conductor to common earth complete all as specified and directed |
| 106 | Description same all as per item No. 104 here-in-above but for 5 Amps socket point on the same board controlled by one switch complete all as specified and directed |
| 107 | Description same all as per item No. 104 here-in-above but for one light point controlled by two, two way switch with 1.5 sq mm copper conductor cable complete all as specified and directed |
| 108 | S&F for modular switch 1 way, 6 amps, 230V AC, one waycompleteall as specified & directed. |
| 109 | S&F for modular socket out let 2-in-1, 3 pin, 6 amp flush type 2 module completeall as specified & directed. |
| 110 | S&F for modular switchflush type 16 amps, 230V AC single pole one waycompleteall as specified & directed. |
| 111 | S&F for modular socket out let 2-in-1, 3 pin, 5 & 16 amp flush type 2 module completeall as specified & directed. |
| 112 | S&F for modular switch 2 way, 6 amps, 230V AC, one waycompleteall as specified & directed. |
| 113 | S&F for ceiling rose surface backelitethree terminals complete all as specified and directed. Make Anchor/havells/legrand |
| 114 | S&F modular fan regulator, 5 stepped, electronic type, single phase, 120 watt, socket size incl connection completecompleteall as specified & directed. |
| 115 | Supply and fixing in replacement of Decorative ultra slim square profile LED lighting fixture 20W, 120 lumen per watt 4\" long batten with extruded polycarbonate, environmental friendly, energy efficient ready to use pack with all assoceries intenallt prewired &includingconeecting up with 2 core flexible cppper conductor cable with sutable size & suitable forand mounting clamps complete all as specified and directed. |
| 116 | Supply & fixing energy efficient LED light of 10 Watt of length - 02 Feet long having minimum 1150 Lumen output, wide voltage protection range 140-270 Volt AC housed in with high quality polycarbonate diffuser including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed. |
| 117 | S&F batten Lamp holderinsulated body PVC/polycarbonatewith back plate and 9 W LED bulb inverter type suitable for batten fitting complete all as specified and directed |
| 118 | S&F on wall building security light luminaire for 1x35 w LEDwith deep drawn housing complete with and including cable for connection from ceiling rose with3 core 1.5 Sqmm PVC insulated stranded copper conductor including bracket made out of 32 mm bore GI Light grade 1.20 M long to required shape as in bracket for to shape fixed on wall/pole with two pair of MS flate iron clamp of size50mm X 6 mm thickness of required shape with nuts, bolts and washers including painting complete and taking down unserviceable one complete all as specified and directed |
| 119 | Taking down carefully ceiling fan/Exhaust fan any sweep and any make after disconnecting the electrical connection, dismantling the blades and removing fan incl bladesand new windin, repair, servicing, paiting if required and after repair made serviceable condition to fix same place complete all as specified and as directed. |
| 120 | Supply and fixing in replacement offactory made epoxy polyester powder coated distribution board TP & N 4 way (vertical load line distribution board) with metal double door (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet andfixed on wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates including4 pole MCCB 200 Amp 25 KA - 01 fixed type NosandTPN/TP/SPN/SP MCB 63 Amps \"C\" curve 10 KA asper site requirement outgoings complete all as specified and conforming to IS: 8623 along with cable end box for aboveDB complete all as specified and directedNOTE :-(a) MCB and MCCB cost shall be included under respetive item of sch.(b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. |
| 121 | M&L for single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps 240 volt capacity for AC complete all as specified and directed. |
| 122 | S&F in replacment offactory made, sheet metal enclosure distribution boards, double door type, protection class ( IP-43), suitable for mountingMCBs confirming to IS-13032, IS-8623, BS-5484 with min 100 Amps rating copper bus bar , SP&N 8 ways, 220volts complete all as specified and directed Note : MCB/ shall be measured and paid seperatly under respective item of this schedule |
| 123 | Supply and fixing in replacment of240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single polescurrent carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed |
| 124 | Supply and fixing in replacment of240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single polescurrent carrying capacity 40/63 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed |
| 125 | Supply and fixing in replacment of240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and neutral current carrying capacity 40/63 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed |
| 126 | M&L inreplacment oftwo single core (submain) FRLS PVC insulated cable of6.00 Sqmm nominal dia and one single core green PVC insulated copper conductor earth continuity cable of 6.00 sqmm nomianal dia as mentioned below is drawn in and includingnon metallic, medium duty, rigid PVC conduit not less than 20 /25mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making good to disturbed surfaces with cement mortar ratio of 1:4 and colour wash complete all as specified and directed.Note :- (I) The cost for cutting, chases required and suitable lugs shall deemed to be included in the quoted unit rate.(II) Two run of submain wire, one run of earth wire and one run of PVC conduit shall be measured one RM |
| 127 | M&L inreplacment oftwo single core (submain) FRLS PVC insulated cable of4.00 Sqmm nominal dia and one single core green PVC insulated copper conductor earth continuity cable of 4.00 sqmm nomianal dia as mentioned below is drawn in and includingnon metallic, medium duty, rigid PVC conduit not less than 20 /25mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making good to disturbed surfaces with cement mortar ratio of 1:4 and colour wash complete all as specified and directed.Note :- (I) The cost for cutting, chases required and suitable lugs shall deemed to be included in the quoted unit rate.(II) Two run of submain wire, one run of earth wire and one run of PVC conduit shall be measured one RM |
| 128 | M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia asearth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion and dismantlling is old earthing complete. Notes(i)The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I(ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire andGI pipe for protection of earth wire. Any varriation in quantity shall be adjusted. |
| 129 | Supply and fixing of GI pipe light grade of size 15 mm bore for laying in trenches/floors or walls including allfittings for fixing complete all as specified and directed |
| 130 | M&L for earth continuity conductor or main earthing lead 4 mm dia GI or steel wire fixed to wall on batten or recessed or buried in ground or drawn in conduit/pipe all as required at site complete all as specified and directed |
| 131 | Schedule of Credit (MINUS) Rs. 51,452.00 B/F from Serial Page No.[Note : Detailsof items for schedule of credit is given on Srl Page No. _____] This amount shall be automatically deducted to arrive at tendered sum |
