|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises to a distance exceeding 1.5 Km but not exceeding 5 Km complete all as specified and as directed. |
| 2 | Taking down of cement or cement lime plaster of any description any thickness on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed. |
| 3 | Demolition of Plain cement concrete (un reinforced)in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 4 | Demolition of reinforced cement concrete of any description , any grade and in any position including reinforcement cut as required to facilitate demolition as in water tanks including base beams, shelves, platforms etc complete all as specified and as directed. |
| 5 | Taking down Chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames) complete all as specified and as directed. |
| 6 | Taking down Chowkhats or framesexc 1.5 sq. m but n exc 4 sq. meach but with shutters (without taking off shutters from the frames) complete all as specified and as directed. |
| 7 | Taking up or down steel tubing 15 mmand connections, including cleaning for refixing or removal to store etc complete all as specified and as directed. |
| 8 | Taking up or down steel tubing 20 mmand connections, including cleaning for refixing or removal to store etc complete all as specified and as directed. |
| 9 | Taking up or down steel tubing 25 mm or 32 mm and connections, including cleaning for refixing or removal to store etc complete all as specified and as directed. |
| 10 | M&L for rendering 5 mm thick in ceilings in CM (1:3) finished even and smooth without using extra cement completeall as specified and as directed . |
| 11 | M&L for rendering 10 mm thick on surfaces of brick work or concrete in CM (1:6) finished even and smooth without using extra cement complete all as specified and as directed . |
| 12 | Demolition of Brickwork or stone/boulder masonry, laid dry complete all as specified and as directed. |
| 13 | M&L for 25 mm thick PCC 1 : 2 : 4 type B-0using 12.5 mm graded stone aggregateas in screed bed in floors complete all as specified and as directed. |
| 14 | Material and labour for water proofing treatment to sunken slabs as under complete all as specified and as directed :-(i) Preparation and cleaning of the existing sunken/lowered portion of RCC slab surface for full depth of sunken floor by wire brush. chisel out any mortar sticking the surface.(ii) Applying FOSROC Nitoproof 600PF (Minimum 0.80mm dft) over a priming coat of Nitoproof WB or equivalent product of Asian paints / M/s MC Bauchemie / CIPY/ SIKA / Pidilite Dr Fixit / Thermax / STP as approved by GE, applied as per manufacturers instructions to bottom and full vertical sides of sunken floors.(iii) Fill it with water and check for dampness and seepage. In case the slightest indication of seepage / leekage is noticed, the same shall be rectified by injection grouting to seal all cracks or application of polymer modified mortar FOSROC Nitobond SBR or equivalent of M/s MC Bauchemie / CIPY SIKA / Pidilite Dr Fixit / Asian paints / Thermax / STP admixed with integral WPC or cementitous crystalline waterproofing compound in the affected area to seal all cracks and micro cracks if any, and this shall be done by contractor at his own cost.(iv) Apply additional coat of FOSROC Nitoproof 600PF or equivalent of Asian paints / M/s MC Bauchemie / CIPY / SIKA / Pidilite Dr Fixit / Thermax / STP .(v) All junction points of side walls where CI/GI pipes are passing through shall be sealed with epoxy cement mortar. |
| 15 | M&L for light weight cinder aggregate of size 20 to 40 mm for sunken filling including taking out old materials of any descriptionand removing debries to a distance exceeding 1.5 Km but not exceeding 5Kmcomplete all as specified and as directed. |
| 16 | M & L for precast cement concretesolid building blocks or slabs 10cm thick with plain or interlocking joints with PCCtype C1 1:3:6using 20mm graded stone aggregatesetting in mortar 1:4 in walls complete all as specified and as directed. |
| 17 | M&L for Precast reinforced cement concrete 1:2:4 mix, type B-1 using 20 mm graded stone aggregate as in slabs supported on walls, as in platforms, shelves etc complete all as specified and as directed. |
| 18 | M&L for steel reinforcement TMT bars 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columnshooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 19 | M & Lfor coloured Non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors, area of each tile exc.0.11 sqm but n.exc 0.18 sqm, set and jointed in Apoxy Grout 2 to 3 mm spacer and filled withwhite cement mixed with matching pigment over and including 20 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 20 | Material and labour for Glazed ceramic coloured tiles in vertical surfaces 600X300X7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match with and including 10mm thick backing coat on vertical surfaces of wall in cement mortar 1:4 complete all as specified and as directed. |
| 21 | M&L 18 to 20 mm thick machine cut polishedgranite stone slab of approved colour and shade as in platforms for counter sunk WHB including cutting holes of required shape for fixing of wash basins, fixed in cement mortar 1:4, pointing with epoxy groutof matching clour including grinding and polishing, moulding edges etc complete all as specified and as directed. |
| 22 | Supplying and laying of 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specifiedincluding cutting grooves/ holesin brick walls for concealing and making good with CM (1:3) where ever required complete all as specified and as directed. |
| 23 | Supplying and laying of 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specifiedincluding cutting grooves/ holesin brick walls for concealing and making good with CM (1:3) where ever required complete all as specified and as directed. |
| 24 | Supplying and laying of 32 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specifiedincluding cutting grooves/ holesin brick walls for concealing and making good with CM (1:3) where ever required complete all as specified and as directed. |
| 25 | S&F of1000lit capacityRotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old exting tank complete all as specified and as directed. |
| 26 | S&F of25 mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwedfor iron pipe (Minimumweight15 mm- 142 Gms)complete all as specified and as directed. |
| 27 | S&F 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both endssuitable for CPVC pipe incuding connecting socket complete all as specified and as directed. |
| 28 | Supply and fixing in repair vitreous china wash basin counter sunk type oval shape, 550x400 size (approx)white including 32 mm chromium plated waste fitting , fixing brackets, in granite slab complete all as specified and as directed. |
| 29 | S&F in repairs 32/40 mm dia brass chromium plated bottle traps for wash basin with inlet and outlet screwed for pipe or connections including necessary packing union and cap and 32 mm dia PVC flexiable waste pipe complete all as specified and as directed. |
| 30 | S&F in repair vitreous china wash down water closet (pedestal pattern) white (excluding fixing bolts, flushing cistern ) with plastic water closet seat including fixing of flush pipe to pedestal pan including all joints complete all as specified and as directed. |
| 31 | S & F in repair10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve, float and handle including brackets complete all as specified and as directed. |
| 32 | S & F in repairs vitreous China squatting pan,‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe complete all as specified and as directed. |
| 33 | S&F in repair vitreous China Urinal, half stall type, with and including waste couplingCP of 40 mm and32 mm dia PVC flexiable waste pipe, all fixing acessories complete all as specified and as directed. |
| 34 | S&F 15 mm pillar taps fancy type cast copperalloy with capstan heads, chromium plated screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts, screwed for iron pipes complete all as specified and as directed. |
| 35 | S&F in repair chromium plated urinal spreader of selected best qualityfor fixing with 15mm dia pipe complete all as specified and as directed. |
| 36 | S&F in repair Brass Chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed. |
| 37 | S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed. |
| 38 | S&F in repair brass chromium plated shower rose 125mm with or without swivel joints including fixing to steel pipe or union complete all as specified and as directed. |
| 39 | S&F 15 mm bore Bib taps chromium plated fancy type , cast copper alloy with crutch or butterfly handle, screwed down, screwed for CPVC pipe 20 mm outer dia including suitable connector socket complete all as specified and as directed. |
| 40 | S&F 15 mm bore Two way Bib taps chromium plated fancy type , cast copper alloy with crutch or butterfly handle, screwed down, screwed for CPVC pipe 20 mm outer dia including suitable connector socket complete all as specified and as directed. |
| 41 | S&F 15 mm bore Stop valves / angle valves, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed for CPVC pipe 20 mm outer dia including suitable connector socket complete all as specified and as directed. |
| 42 | S & F in PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 43 | S&F of5mm thick looking mirror of selected quality glass, mounted on 12 mm thick pvc sheetand fixed with wooden plugs and chromium plated screws including necessary joining cleats, glazing clips, rubber packing with anodised aluminium beading etc complete all as specified and as directed. |
| 44 | S & F in repair PVC (SWR) pipes of 110mm dia single socketed in any length with rubber ring joints fixed to walls / floorincl taking down old pipes of any description complete all as specified and as directed. |
| 45 | S & F in repair PVC (SWR) pipes of 75 mm dia single socketed in any length with rubber ring joints fixed to walls / floorincl taking down old pipes of any description complete all as specified and as directed. |
| 46 | S&F in repair 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 47 | S & F in repairs PVC (SWR) bend of 75 mm dia complete all as specified and as directed. |
| 48 | S&F in repairs 110mm bore PVC SWR bend of 110 mm dia complete all as specified and as directed. |
| 49 | S&F in repairs 110mm bore PVC SWR bendwith acces door complete all as specified and as directed. |
| 50 | S&Fin repairs 110mm bore PVC SWR junction single (single T)equal or unequal complete all as specified and as directed. |
| 51 | S&F in repairs PVC (SWR) 110 mm dia Vent cowl complete all as specified and as directed. |
| 52 | M&L in repairs for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed. |
| 53 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and as directed. |
| 54 | S&F ofProviding and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and as directed. Note: Stainless steel butt hinges and necessary S.S screws shall be paid separately. |
| 55 | S&F ofFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardanand fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and as directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.suppling & fixing in opening as per specification & drawing all as specified and directed. |
| 56 | S&F of 100mm stainless steelbutt hinges, cold rolled medium weight complete all as specified and as directed. |
| 57 | S&F of 100mm Aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed. |
| 58 | S&F of 100mm extruded aluminium anodised alloy handles fabricated type complete all as specified and as directed. |
| 59 | S&F250 mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and as directed. |
| 60 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 61 | S&F 4mm thick Figured glass, pin head type and glazing fixed in aluminium frames with rubber beading/gasket in squares n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 62 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed with alluminium wire staples complete all as specified and as directed. |
| 63 | M & L for preparing new plastered or unplastered surfaces on walls including cornices and applying two coats of distemper over a coat of alkali resistant primer complete all as specified and as directed. |
| 64 | M & L for preparation of newly plastered surfaces & applying threecoatsof white wash on ceilings complete all as specified and as directed. |
| 65 | S&F Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistanceof 99%, NRC0.50 to 0.75 as per IS8225:1987, Noncombustible as per BS 476 (part 4 ) -1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of mainT runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. with fully perforated 12mm thick micro tegular edged or 10mm thick squre edged GRG False ceiling . The work shall be carried out as per specifications, drawing complete all as specified and as directed. |
| 66 | M&L for complete removal of existing treatment on walls,including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces andProviding and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two or more coats of distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer\"s specification complete all as specified and as directed. |
| 67 | M&L for preparationof old plastered external wall surfaces by complete removal of existing treatment and applying applying one coats of cement basedpaintover a priming coat complete all as specified and as directed. |
| 68 | M & L for preparation of oldplastrered surfaces of ceiling& applying one coatsof white wash complete all as specified and as directed. |
| 69 | M&L preparation old untreated steel surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint over complete all as specified and as directed. |
| 70 | M & L for preparing old plastered or unplastered surfaces on walls including cornices and applying one coat of white wash complete all as specified and as directed. |
| 71 | M & L for preparing old painted wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 72 | Supply and fixing of 12mm thick Toughned glass as in hinged doors, partitions automatic doors , Curved or Flat parapet glass portion and similar work including cutting to shape, drilling holes required complete all as specified and as directed. |
| 73 | Supply & Fixing of AFA Logo with crest (Glass Etched) of Size 450mm dia and overall height 710mm on 12mm thick tuffend glass complete all as specified and as directed. |
| 74 | S&F stainless steel heavy duty Floor spring complete all as specified and as directed. |
| 75 | S&F Door handle cylinder crystal style of size 300mm long (set of 2) complete all as specified and as directed. |
| 76 | S&F Stainless Steel Glass door lock complete all as specified and as directed. |
| 77 | S&Fpowder coatedaluminium frame for doors, windows, ventilators, partitions etc with one or more rebates including joining cleat for fixing etc complete all as specified and as directed. |
| 78 | S &F Aluminium anodized powder coated door shutter aluminium section weighing 0.55kg/m incl necessary joining cleats, glazing clips rubber neoprene packing handles 2 nos in each door hinges anodised aluminum snap beading screws etc complete all as specified and as directed. |
| 79 | S & F powder coatedaluminium window and ventilator shutters of Sliding type with standard aluminium sections 40 x 18mm sizeweight not less than 0.55Kg/Rm including rollers and necessary locking arrangement etc complete all as specified and as directed. |
| 80 | S&F in 100mm miled steelbutt hinges, cold rolled medium weight complete all as specified and as directed. |
| 81 | S&F in 200mm Aluminum anodised barrel tower bolts of extruded section complete all as specified and as directed. |
| 82 | S&Fin repair 150mm extruded aluminium anodised alloy handles fabricated type complete all as specified and as directed. |
| 83 | S&F300 mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and as directed. |
| 84 | S&F 150mm Floor door stopper ofbrass body and tongue with hard drawn steel spring etc complete all as specified and as directed. |
| 85 | S&F 12mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to Aluminium frame work complete all as specified and as directed. |
| 86 | M&L for 0.56 mm thick plain aluminium sheeting, alloy 31000H4 fixed to crumple joints with necessary rawl plugs and screws complete all as specified and as directed. |
| 87 | S&F 12 mm thick veneered decorative plywood grade 1 (with BWR resin) with one face decorative veneer fixed with nails to timber frame work complete all as specified and as directed. |
| 88 | M&L for IInd class hard wood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,supplied and fixed complete all as specified and as directed. |
| 89 | M & Lfor Virified tiles 10 mm thick (square/ rectangular) polished dark shade, double charged, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchover and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 90 | M & Lfor Virified tiles 10 mm thick (square/ rectangular) polished, dark shade, double charged area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 10mm thick backing coat on vertical surfaces of wall as in skirtingin cement mortar 1:4 complete all as specified and as directed. |
| 91 | Taking down old, unsv aluminium/copper point wiring (light, fan, socket or power) complete, incl fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc complete all as specified and as directed. |
| 92 | Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc complete all as specified and as directed. Note for Item Nos 91 & 92 : Cost of making good the disturbed surfaces is deemed to be included in the unit quote rates. |
| 93 | M & L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade), ISI marked with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes, Modular White Cover Plates with frames of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc. complete all as specified and as directed for the following : Make of cable : Havells/Polycab/Finolex/KEI,Make of Conduit : Precision/Finolex/Polycab/Modi |
| 94 | One Light/E/Fan etc. point controlled by one switch 5/6 Amps complete all as specified and as directed. |
| 95 | One switch socket outlet point 5/6 Amps on independent board complete all as specified and as directed. |
| 96 | Description all as per Item No-4 above but with FRLS PVC insulatedcopper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete all as specified and as directed. Note for Item Nos 93 & 94 : (i) Modular metal flush boxes, Modular White Cover Plates with frames shall be measured & paid separately.(ii) Cutting chases & making good the disturbed surfaces is deemed to be included in the unit quoted rates.(iii) The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets. |
| 97 | M & L for sub-main wiring alongwith earth wire of size (2 x 2.5) sq. mm +(1 x 2.5) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc complete all as specified and as directed. Make of cable : Havells/Polycab/Finolex. Make of Conduit : Precision/Finolex/Polycab/ModiNote : (a) Two runs of PVC wire, One run of Earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. (b) Cost of Modular metal flush boxes (if any for junction inspection) is deemed to be included in the unit quoted rates. (c) Cutting chases (if any) & making good the disturbed surfaces is deemed to be included in the unit quoted rates. (d) Cost of PVC clamps/saddles of appropriate sizes with fixing screws for fixing on walls &/or PVC cable ties etc. for fixing on steel support members (if any) is deemed to be included in the unit quoted rates. (e) The wiring shall be done with proper colour coding using Red, Yellow & Blue Coloured wires only for Phase, Black for Neutral & Green for Earth Wire. |
| 98 | M & L for sub-main wiring alongwith earth wire of size (4 x 4.0) sq. mm + (1 x 4.0) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) of minimum size 25 mm dia with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc complete all as specified and as directed. Make of cable : Havells/Polycab/Finolex/KEI. Make of Conduit : Polycab/Finolex/Modi/Precision. Note : (a) Four runs of PVC wire, One run of Earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. (b) Cost of Modular metal flush boxes (if any for junction inspection) is deemed to be included in the unit quoted rates. (c) Cutting chases (if any) & making good the disturbed surfaces is deemed to be included in the unit quoted rates. (d) Cost of PVC clamps/saddles of appropriate sizes with fixing screws for fixing on walls &/or PVC cable ties etc. for fixing on steel support members (if any) is deemed to be included in the unit quoted rates. (e) The wiring shall be done with proper colour coding using Red, Yellow & Blue Coloured wires only for Phase, Black for Neutral & Green for Earth Wire. |
| 99 | S & F Modular switch, one way, 6 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXXW061, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab |
| 100 | S & F Modular shuttered socket outlet 3 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKSWW063, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab |
| 101 | S & F Modular switch, one way, 16 Amp, 1 Module, 240 volt with Indicator complete all as specified and as directed. Cat No : ACVSXXW161, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab |
| 102 | S & F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKCWW163, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/PolycabNote for Item Nos 97 to 100 : (a) Design / Drawing / Technical catalogue / specifications alongwith comparative Rate Analysis to be submitted to the Engr-In-Charge for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned. (b) Cost of taking down old unsv one & making good disturbed surfaces is deemed to be included in the unit quoted rates. |
| 103 | Supply & Fixingand concealing modular metal flush boxsuitable for fixing switches/sockets of 1/2 modules complete all as specified and as directed. Make : VERONA (Havells) or techno-commercially equiv In Legrand / Anchor Roma / Polycab |
| 104 | Supply & Fixingand concealing modular metal flush boxsuitable for fixing switches/sockets of 3 modules complete all as specified and as directed. Make : VERONA (Havells) or techno-commercially equiv In Legrand / Anchor Roma / Polycab |
| 105 | Supply & Fixingand concealing modular metal flush boxsuitable for fixing switches/sockets of 6 modules complete all as specified and as directed. Make : VERONA (Havells) or techno-commercially equiv In Legrand / Anchor Roma / Polycab |
| 106 | Supply & Fixingand concealing modular metal flush boxsuitable for fixing switches/sockets of 12 modules complete all as specified and as directed. Make : VERONA (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab |
| 107 | Supply & Fixingand concealing modular metal flush boxsuitable for fixing switches/sockets of 18 modules complete all as specified and as directed. Make : VERONA (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab |
| 108 | Supply & Fixingmodular cover platesuitable for fixing switches/sockets of 1/2 modules complete all as specified and as directed. Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand / Anchor Roma / Polycab |
| 109 | Supply & Fixingmodular cover platesuitable for fixing switches/sockets of 3 modules complete all as specified and as directed. Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand / Anchor Roma / Polycab |
| 110 | Supply & Fixingmodular cover platesuitable for fixing switches/sockets of 6 modules complete all as specified and as directed. Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand / Anchor Roma / Polycab |
| 111 | Supply & Fixingmodular cover platesuitable for fixing switches/sockets of 12 modules complete all as specified and as directed. Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand / Anchor Roma / Polycab |
| 112 | Supply & Fixingmodular cover platesuitable for fixing switches/sockets of 18 modules complete all as specified and as directed. Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/PolycabNote for Item Nos 102 to 110 : (i) The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets. (ii) Cost of taking down old unsv one & making good disturbed surfaces is deemed to be included in the unit quoted rates. |
| 113 | S&F ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite three terminal complete all as specified and as directed. Make: Havells/Legrand/Anchor |
| 114 | S&F Surface and wall mounted LED batten 10 watts 2 feet long, Warm White, extruded aluminium housing providedfor efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit incl taking down old unsv one complete all as specified and as directed. Make : LUKER, Cat No LT510P WW or techno-commercially equiv in Havells/Jaguar/Philips. |
| 115 | S&F Surface and wall mounted LED batten 20 watts 4 feet long, 3-IN-1, extruded aluminium housing providedfor efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit incl taking down old unsv one complete all as specified and as directed. Make : LUKER, Cat No LT520P 3-IN-1 or techno-commercially equiv in Havells/Jaguar/Philips. |
| 116 | S & F LED square shape (2\" x 2\") slim ceiling RECESS light fitting 40 W or next higher rating, CRI > 80, CT>5700 K (White), integrated type, with high efficiency electronic driver, surge suppressor/protection & high brightness LEDs, with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size incl taking down old unsv one complete all as specified and as directed. Cat No : LKM2240 of make Luker or techno-commercially equiv in Havells/Jaguar/Philips. |
| 117 | S & F LED square shape (2\" x 2\") slim ceiling SURFACE light fitting 40 W or next higher rating, CRI > 80, CT>5700 K (White), integrated type, with high efficiency electronic driver, surge suppressor/protection & high brightness LEDs, with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size incl taking down old unsv one complete all as specified and as directed. Cat No : LKMSRS40N of make Luker or techno-commercially equiv in Havells/Jaguar/Philips. |
| 118 | Supply and fix energy saving high power LED building security light of 30W made up of pressure die cast aluminum housing with embedded PC cover having top opening, seperate driver compartment with IP66 protection, IK-09 and making electric connections in flexible conduit with & incl GI Pipe bracket of appropriate dia & necessary fixing arrangements like clamps, nuts, bolts, washers etc. incl taking down old unsv one complete all as specified and as directed. Make : LUKER, Cat No LSTE030S or techno-commercially Equivalent in Havells/Jaguar/Philips. |
| 119 | S&F Surface and wall mounted LED Picture Light 12 watts, Warm White with integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit incl taking down old unsv one complete all as specified and as directed. Make : LUKER, Cat No LMCL 12 WW or techno-commercially equiv in Havells/Jaguar/Philips.Imp Note for Item Nos 112 to 117 : (a) Design/Drawing/Technical catalogue/specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge/GE for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned before placing order to the Manufacturer/Supplier. (b) Anything missed out in the technical specifications but technically required for efficient working is deemed to be included in the quoted rates. (c) Cost of taking down old unsv one & making good disturbed surfaces is deemed to be included in the unit quoted rates. |
| 120 | Supply, install, commissioning & testing of Exhaust fan, metal body with automatic back shutter louvers 380 mm sweep, 1400 RPM or more, single phase, 240 Volts, AC, 50 Hz and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator/other surfaces etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) incl taking down old/unsv one complete all as specified and as directed. Make : Havells, Cat No: Turbo Force (SP) or techno-commercially equivalent in Usha/Bajaj/Khaitan. Note :- (i) The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates. (ii) The cost of transportation of old unsv E/fan to MES storeyard is deemed to be included in unit quoted rates. (iii) Installed C/Fans Warranty card duly signed by the user should be submitted to the Engr-in-Charge. |
| 121 | S&F Ceiling Fans complete with blades, down rods, electronic regulator (compatible for BLDC Fans) & accessories, 230 V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE, 5 Star rated with BLDC mtor incl taking down old/unsv one complete all as specified and as directed. Make : HAVELLS/BAJAJ/USHA/KHAITAN. Note : (i) Installed C/Fans Warranty card duly signed by the user should be submitted to the Engr-in-Charge. (ii) The cost of making good the disturbed surface & fixing arrangements required is deemed to be included in the quoted rate. (iii) The cost of transportation of old unsv Ceiling Fan to MES storeyard is deemed to be included in unit quoted rates. |
| 122 | S & F SPN DB, 4 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection & taking down old unsv one complete all as specified and as directed. Make-L&T/LEGRAND/SIEMENS/ABB. |
| 123 | S&F MCB, TP, C-Series 415 Volts of capacity 25-63 Amps with breaking capacity 10 KA complete all as specified and as directed. Make : L&T/LEGRAND/SIEMENS/ABB. Note for Item Nos 120 & 121 : Make of MCBs shall be same as the make of MCB DBs. |
| 124 | M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6.3 mm thick buried directly in ground (in vertical position) earth pit not less than 2.25 mtr below normal ground level with the top edge of the earth plate not less than 1.5 mtr (B.G.L.) and connected to galvanized iron wire 4 mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron including PCC pit & cover with suitable handle including necessary excavation and earth work in any type of soil, 20 mm dia med grade galvanized steel tube for watering with one end fixed with funnel and wire mesh, 15 mm bore medium grade galvanized steel tubing for drawing earth lead GI strip protection & common salt, charcoal in alternate layers etc complete all as shown in EP No 3 of SSR Part 1 and testing on completion complete all as specified and as directed. Make of GI Pipe : TATA / Jindal / PrakashNote : On completion of the complete work/job the Contr is to perform earth resistance tests for each earthing job in the presence of the Engr-In-Charge or his rep & submit test certificates duly signed & certified. If the test results are not satisfactory or not within the permissible limits of relevant Standards/IS then the job is to be redone without any extra cost to the Dept till the results are satisfactory. |
| 125 | S&F rigid non-metallic PVC Conduit (medium grade) of size 20 mm dia, ISI Marked of colour as approved by Engr-In-Charge inclusive of connected fittings with & including necessary fixing arrangements such as PVC saddles, couplers, lock nuts, pipe hooks etc. suitable for drawing AC electric cables complete all as specified and as directed. Note : Quoted rate is deemed to be inclusive of cost of drawing electric cables after electric supply disconnection & re-connection after drawing complete. |
| 126 | Supply and laying through rigid non-metallic PVC conduit of size min 25 mm dia, medium grade incl connected fittings along walls / ceilings / plinths etc. Cable with Copper conductor PVC round sheathed (flexible), FRLSH, industrial cable, 1100 Volts grade of cross sectional area, 4.0 Core 10 Sqmm incl connecting with suitable glands, lugs etc incl taking down old unsv one complete all as specified and as directed. Make of Cable : Havells/Finolex/Polycab/Gloster, Make of Conduit : Precision/Finolex/Polycab/Modi.Note : Cost of PVC clamps/saddles of appropriate sizes with fixing screws for fixing on walls etc. &/or PVC cable ties etc. for fixing on steel support members (if any) is deemed to be included in the unit quoted rates. |
