|
| 1 | Note-(i) Work to be carried out on GL to 14th Floor (including terrace of building) (ii) Rate of Scaffolding and Safety system for labour are included in quoted rates by contractor (iii) Safety Net and Water proofing covering materials shall be arrange by contracter while working at site and it will be deem fit in quoted rates by contractor.M&L for preparing of old decorated plastered surfaces of wall including plasters and cornises etc by using steel wire brush brooming down,washing with water as required and applying two coats of oil bond distemper over a coat of 3 mm wall care putty complete all as specified and directed |
| 2 | M&L for preparing of old decorated plastered surfaces of ceiling by using steel wire brush brooming down,washing with water as required and applying two coats of oil bond distemper over a coat of 3 mm wall care putty complete all as specified and directed |
| 3 | M&L for preparation of old painted wooden surfaces of any descriptrion over 10 cm width or girth, with aluminium primer and applying two coat of synthetic enamel painting to wooden surface as specified and as directed. |
| 4 | M&L for preparation of old painted Steel surfaces of any descriptrion over 10 cm width or girth and applying two coat of synthetic enamel painting to steel surface as specified and as directed. |
| 5 | M&L Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 6 | M&L Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and Rendering 10mm thick on fair faces of brickwork or concrete surfaces in cement plaster1:4 rough finished surfaces to receive tiles. |
| 7 | M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colouredcement to match and Rendering 10mm thick on fair faces of brickwork or concrete surfaces in cement plaster1:4 rough finished surfaces to receive tiles. |
| 8 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 9 | S&F in repairs 15 mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed |
| 10 | S&F in repairs Brasschromiumplatedshower rose 125mm size Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union |
| 11 | S&F in repairs Vitreous China wash basin, white, flat back, size 550x400 mm excludingbut including bracketsexcluding taps, waste, chain and plug andporcelain stopper but including brackets |
| 12 | S&F in repairs Pillar taps fancy type two in one of 15mm, cast copper alloy, with capstan heads,chromium plated,screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts,screwed for iron pipe and fixed |
| 13 | S&F in repairsVitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts,flushing cistern and flush pipe) |
| 14 | S&F in repairs 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet,ball valve, float and handle including brackets |
| 15 | S&F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern |
| 16 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 600 mm |
| 17 | S&F in repairs 15 mm Bib taps fancy type two in one connection chromium plated cast copper alloy with crutch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed |
| 18 | S&F in repairs Stop valves/angle cock 15 mm, cast copper alloy, screwed down, highpressure,withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed |
| 19 | S&F in repairs Stop valves of 15mm, cast copper alloy, screweddown,high pressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixedfancy type, chromium plated with long shankandcup (concealed type) |
| 20 | M&L in repairs Medium 12mm density fibre board, exterior grade,fixed to ceiling,flat or sloping timber,walls framework with screws (For Kitchen cupboard/Rack) |
| 21 | S&F in repairs 75 mm Extruded aluminium alloy handles, fabricated type, anodised |
| 22 | S&F in repairs Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-12 |
| 23 | S&F in repairs 150 mm Extruded aluminium alloy handles, fabricated type,anodised |
| 24 | S&F in repairs Aluminium alloy, anodised, sliding door bolt 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 25 | S&F Aluminium anodised, barrel tower bolts 200 mm of extruded section and fixed |
| 26 | S & F in repair 100 mm in size brass 2 levers mortise lock vertical type fixed in door/shutter complete all as specified and directed. |
| 27 | S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in floor,door |
| 28 | S&F in repairs 40 mm Waste coupling of PTMT (half or full threaded) . (Minimum weight 40 mm 45gms/40mm-60 gms) |
| 29 | S&F in repairs 350X450 mm size cabinet mirror rectangular shape with 4 mm thick selected quality mirror and PTMT frame with openable door shutter with PTMT frame outside mirror as framed complete all as specified and directed |
| 30 | S&F in repairs Grating square 150 mm size of PTMT (Minimum weight 100gms) |
| 31 | S&F Door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed |
| 32 | S&F in repairs Bib tapsFancy type,chromium plated cast copper alloy with crutch orbutterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed (for kitchen tap) |
| 33 | M&L for preparing of old decorated plastered surfaces of wall including plasters and cornises etc by using steel wire brush brooming down,washing with water as required and applying two coats of oil bond distemper over a coat of 3 mm wall care putty complete all as specified and directed |
| 34 | M&L for preparing of old decorated plastered surfaces of ceiling by using steel wire brush brooming down,washing with water as required and applying two coats of oil bond distemper over a coat of 3 mm wall care putty complete all as specified and directed |
| 35 | M&L for preparation of old painted wooden surfaces of any descriptrion over 10 cm width or girth, with aluminium primer and applying two coat of synthetic enamel painting to wooden surface as specified and as directed. |
| 36 | M&L for preparation of old painted Steel surfaces of any descriptrion over 10 cm width or girth and applying two coat of synthetic enamel painting to steel surface as specified and as directed. |
| 37 | M&L Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 38 | M&L Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and Rendering 10mm thick cement plaster on fair faces of brickwork or concrete surfaces in cement plaster1:4 rough finished surfaces to receive tiles. |
| 39 | M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or colouredcement to match and Rendering 10mm thick cement plaster on fair faces of brickwork or concrete surfaces in cement plaster1:4 rough finished surfaces to receive tiles. |
| 40 | Taking up or down 15 mmsteel tubing and connections,including cleaning for refixing or removal to store |
| 41 | Supplying and laying of 16mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floorscomplete all as specified. |
| 42 | M & L for rendering 15mm thick cement plaster on external surfaces of brick or concrete wall surfaces in cement motar 1:4 of cement and surfaces finished enen and fair without using extra cement all as specified and directed. |
| 43 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 44 | S&F in repairs 15 mm Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed |
| 45 | S&F in repairs Brasschromiumplatedshower rose 125mm size Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union |
| 46 | S&F in repairs Vitreous China wash basin, white, flat back, size 550x400 mm excludingbut including bracketsexcluding taps, waste, chain and plug andporcelain stopper but including brackets |
| 47 | S&F in repairs Pillar taps fancy type two in one of 15mm, cast copper alloy, with capstan heads,chromium plated,screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts,screwed for iron pipe and fixed |
| 48 | S&F in repairsVitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts,flushing cistern and flush pipe) |
| 49 | S&F in repairs 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet,ball valve, float and handle including brackets |
| 50 | S&F in repairs Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern |
| 51 | S&F in repairs PVC connections 15mm size with PTMT nuts of length 600 mm |
| 52 | S&F in repairs 15 mm Bib taps fancy type two in one connection chromium plated cast copper alloy with crutch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed |
| 53 | S&F in repairs Stop valves/angle cock 15 mm, cast copper alloy, screwed down, highpressure,withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed |
| 54 | S&F in repairs Stop valves of 15mm, cast copper alloy, screweddown,high pressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixedfancy type, chromium plated with long shankandcup (concealed type) |
| 55 | M&L in repairs Medium 12mm density fibre board, exterior grade,fixed to ceiling,flat or sloping timber,walls framework with screws (For Kitchen cupboard/Rack) |
| 56 | S&F in repairs 75 mm Extruded aluminium alloy handles, fabricated type, anodised |
| 57 | S&F in repairs Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-12 |
| 58 | S&F in repairs 150 mm Extruded aluminium alloy handles, fabricated type,anodised |
| 59 | S&F in repairs Aluminium alloy, anodised, sliding door bolt 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 60 | S&F Aluminium anodised, barrel tower bolts 200 mm of extruded section and fixed |
| 61 | S & F in repair 100 mm in size brass 2 levers mortise lock vertical type fixed in door/shutter complete all as specified and directed. |
| 62 | S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in floor,door |
| 63 | S&F in repairs 40 mm Waste coupling of PTMT (half or full threaded) . (Minimum weight 40 mm 45gms/40mm-60 gms) |
| 64 | S&F in repairs 350X450 mm size cabinet mirror rectangular shape with 4 mm thick selected quality mirror and PTMT frame with openable door shutter with PTMT frame outside mirror as framed complete all as specified and directed |
| 65 | S&F in repairs Grating square 150 mm size of PTMT (Minimum weight 100gms) |
| 66 | S&F Door closer hydraulically regulated, designation No.3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed |
| 67 | S&F in repairs Bib tapsFancy type,chromium plated cast copper alloy with crutch orbutterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed (for kitchen tap) |
| 68 | \"Supply and Application of 4 Layer Thermacool Waterproofing Coating System on leaking concrete wall/Ceiling surface by thorough surface preparation followed opening of cracks, application of absorption coat of Thermacool WP 51, nano-tech modified, UV resistant elastomeric clear coat having min. 50% solids, filling of cracks, then overcoating with 2 Coats of Thermacool WP51 + Cement mixture as waterproofing coat having +450% Elongation, Tensile Strength min. 2.2 MPa and then top-coated with 1 protective coat of Thermacool 0.3C pure acrylic based, UV resistant, non-yellowing, bio-organism resistant (anti-fungal, anti-bacterial) coating conforming to BIS STD IS 17218:2019 with Pull off Adhesion 2.8 Mpa, passes 2000 hrs accelerated durability test, suitable for all types of cementitious surfaces, white colour, matt, surface coverage 3.25 sqm/Ltr/2 coat, DFT 100 - 120 microns using brush, roller, airless spray gun as applicable. The product should have been tested at IIT or NABL Approved Lab and application is to be done by Thermogreen cool coat private limited approved applicator only\" |
| 69 | M&L for preparation old surfaces of plastered or unplasteredold decorated surfaces by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, washing with water as required and applying two coats of oil bond distemper on walls including cornices, pilasters etc over a coat of 3.00mm thick wall care putty complete all as specified and directed. |
| 70 | Ditto all as per item No. 01 here in above but on ceiling surfaces complete all as specified and directed by Engr-in-Charge. |
| 71 | M&L for preparation of old plaster surfaces finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. Note : The work is required to be carried out upto 25th floor (including terrace of building) from ground floor. The cost of scaffolding shall be deemed to be included in the item. The contractor shall also make necessary safety arrangement for labour. |
| 72 | M&L for preparation of old painted wooden surfaces of any descriptrion over 10cm width or girth and applying one coat of synthetic enamel painting to wooden surface as specified and as directed. |
| 73 | M&L preperation of old painted steel and iron surfaces of any description over 10cm width of girth and applying one coat of synthetic enamel paint (any tint/shade) complete all as specified and directed by Engr-in-Charge. |
| 74 | Taking down cement plaster on brick or stone walls etc.including racking out joints,hacking for key scrubing down with water&receive plaster upto double story height complete all as specified and as directed. |
| 75 | M&L for rendering 15mm thick on brick wall or concrete surface in cement mortar 1:4 mixed with WPC, finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. Note : WPC shall be measured and paid for seperately. |
| 76 | M&L for rendering 15mm thick on fair faces of brickwork in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 77 | M&L for rendering 10mm thick plastering on fair faces of concrete surfaces of ceiling mixed with water proofing compound of acylic bonding material as per manufacturing materials of M/s pedilite/M/s Dr. fixit/M/s Fosrack including clean existing reinforcement with wire/ rotary wire brush, making the surfaces free from loose material dirt etc and filling deep patch with concrete and making smooth and even surfaces without using extra cement in CM 1:4 complete.(Water proofing compound measured separately) |
| 78 | Supply only Liquid Water proofing compound complete all as specified and directed. |
| 79 | M&L preparation of new surfaces with 3mm thick wall care putty and applying two coat of oil bond distemper over a coat of primer on walls complete all as specified and directed by Engr-in-Charge. |
| 80 | M&L for preparation of new plaster surfaces finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. Note : The work is required to be carried out upto 25th floor (including terrace of building) from ground floor. The cost of scaffolding shall be deemed to be included in the item. The contractor shall also make necessary safety arrangement for labour. |
| 81 | M&L preparation of new surfaces with 3mm thick wall care putty and applying two coat of oil bond distemper over a coat of primer on ceiling complete all as specified and directed by Engr-in-Charge. |
