Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Excavating in post holes(or similar holes) each n exc .5 cum getting out in soft / loose soil,returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25 cm etc complete all as specified and as directed |
| 2 | Surface excavation n exc 30 cm deep and average 15 cm in soft/loose soil and getting out in Soft / Loosesoil etc complete all as specified and as directed |
| 3 | Excavation over area n exc 1.5m in depth and getting out in soft/ loose soil etc complete all as specified and as directed |
| 4 | Excavation over areaexc 1.5m in depth but n exc 3mand getting out in soft/ loose soil etc complete all as specified and as directed |
| 5 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in Soft / Loose etc complete all as specified and as directed |
| 6 | Spreading and levelling in layers n exc. 25cm thick incl well ramming including watering as required etc complete all as specified and as directed. |
| 7 | Returning, filling in, including spreading, levelling,watering and well ramming in layers not exc 25 cm thick with soil etc complete all as specified and as directed |
| 8 | Removing excavated materialexc. 250 m but n exc. 500 m anddepositing where directed et complete all as specified and as directed |
| 9 | Material and labour for hard core with broken stone or boulder of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15 cm thick water and rammed to a true surfac etc all as specified and as directed |
| 10 | Supply only broken bricksfor loose filling, in pitsof gauge exc 63 mm and n exc100 mmcomplete all as specified and directed. |
| 11 | Material and labour for PCC 1:2:4 type B-0 with using 12.50 mm graded stone aggregate as in surface channels and drains complete all as specified and directed. |
| 12 | Material and labour for cement concrete 1:2:4 type, B1 (using 20 mm graded stone aggregates )as in copings, Chajja kerbs,etc including necessary form work, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed. |
| 13 | Material and labour for Providing precast cement concrete Type B-1 1:2:4 (20 mm graded stone aggregates) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 etc complete all as specified and as directed |
| 14 | Material and labour for cement concrete1:3:6 type C2 (40mm graded stone aggregate) as in foundations filling and mass concrete etc complete all as specified and as directed |
| 15 | Material and labour for plain cement concrete 1:4:8 type D-2, ( using 40 mm graded stone aggregates) as in foundations and mass concrete etc complete all as specified and as directed |
| 16 | Material and labour for cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in hold fast and fillingof pressed steel chowkatetc complete all as specified and as directed |
| 17 | Material and labour for providing reinforced cement concrete (M-25) Design Mix with using 20 mm graded stone aggregates as in Foundation, including rafts, footings, plinth beam etc complete all as specified and as directed |
| 18 | Material and labour for reinforced cement concrete M-25 (desing mix) with using 20 mm graded stone aggregates as in slab supported on walls, beam and columns in floors, roofs landing balconies canopies etc complete all asspecified and as directed. |
| 19 | Material and labour for providing reinforced cement concrete (M-25) design Mix with using 20 mm graded stone aggregates as in Chajja etc complete all as specified and as directed |
| 20 | Material and labour for providing reinforced cement concrete (M-25) Design Mix with using 20 mm graded stone aggregates as in beam, cantilevers, bressumers, lintels over 1.5 mtr span etc complete all as specified and as directed |
| 21 | Material and labour for providing reinforced cement concrete (M-25) design Mix with using 20 mm graded stone aggregates as in col, pillars, piers, posts and struts etc complete all as specified and as directed |
| 22 | Supply only Liquid water proofing compound |
| 23 | Material and labour brickwork (Old size Brick) with sub class ‘B’ bricks, straight orcurved on plan exc 6mmeanradius built in cement mortar 1:6 etc complete all as specified and as directed |
| 24 | Material and labour for brick work with sub class `B\" bricks old sized straight or curved on plan exc 6 M mean radous and built in cement mortar 1:4 etc complete all as specified and as directed. |
| 25 | Material and labour brickwork (Old size Brick) with sub class ‘B’ bricks, straightor curved on plan to anyradius inhalf brick thickwalls built in Cm 1:4 etc complete all as specified and as directed |
| 26 | Material and labour for Damp proof course 40 mm thick in cement concrete 1:2:4 type B-0 to horizontal or vertical surfaces including necessary formwork and applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m etc complete all as specified and as directed. |
| 27 | Material and labour for green Marble work ( 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and as directed. |
| 28 | Material and labour for 18 to 20mm thick granite Granite stone slab(of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including grinding the edges half roundetc complete all as specified and as directed |
| 29 | Material and labour for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or toetc complete all as specified and as directed |
| 30 | Material and labour for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) with Rough finished surfaces of concrete (Flat) etc including edges of roof slab etccomplete all as specified and as directed |
| 31 | Material and labour forformwork to chullah hoods, chajjas, troughs and similar items including edge, rough finished surfaces of concrete etc complete all as specified and as directed |
| 32 | Material and labour for formwork to sides and soffits of floor or roof beam, beam and haunching, girders, bressummers, lintels cantilevers, shelves including supports, overhangs etc also splays between floor and beam with rough finished etc complete all as specified and as directed |
| 33 | Material and labour for formwork to sides of pillars, posts, struts, piers, col and stanchions, for square, rectangular or polygonal, rough finished surfaces of concrete etc complete all as specified and as directed |
| 34 | Supply and fixStop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 20mm bore of iron pipe or for union and fixedcomplete all as specified and as directed |
| 35 | Supply and fix 2nd class hard wood 35 mm thick Glazed andskeletonshutters, openrebated and preparedto receive glass,gauze, etc. (withoutsash bars),edges offraming plain,chamfered orrounded. fitted withcut and mitred beadsfor securing glass, etc.; sizes of me-mbers of shutters asspecified inSSR PartI, Section 8, clause8.24(a); supplied andfitted to chowkats etc complete all as specified and as directed |
| 36 | Supply and fix 35mm thick flush shutter solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed |
| 37 | Supply and fix Solid PVC Door Frame of size 50mm x 47mmmade out of 5mm plain colour PVC sheetreinforced with M.S. Square tube, suppling & fixing in opening as per specification &drawing etc complete all as speciffied and as directed |
| 38 | Supply and fix Factory Made Solid PVC Moulded Door Shutter, with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm prelam PVC sheet on back face, supplying & fixing in frame at site as per specification and drawing complete all as directed. |
| 39 | Supply and fix aluminium anodised towerbolt 200 mm long of extruded section etc complete all as specified and as directed |
| 40 | Supply and fix 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 41 | Supply and fix aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed |
| 42 | Supply and fix 100mm sizebutt hinges, medium weight, cold rolled stainless steel, and fixed etc complete all as directed. |
| 43 | Supply and fix mild steel 300mm, ordinary rat tailrod pattern springsincluding roller androller plate etc complete all as specified and as directed |
| 44 | Supply and fix150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed |
| 45 | Supply and fix100 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed |
| 46 | Supply and fix stainless steel decorative curtain rod of 25 mm bore (weight not less 400 gms per running meter) incl fancy finale caps cap (02 nos in each curtain rod)incl Brass Chromium Plated designer Bracket for curtain rod of dia 25 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm longetc complete all as specified and as directed |
| 47 | Supply and fixbrass chromium plated tubular towel rail, 20mmdia, D type, 60cm long between flangesetc complete all as specified and as directed |
| 48 | Supply and fix tubular towel ringwith brass chromium plated brackets fixed with screws and wooden/plastic cleats etc. complete all as specified and directed. |
| 49 | Supply and fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staple etc complete all as secified and as directed |
| 50 | Material and labour for framed work as in grills, grating etc with ends of bars shouldered and / or riveted or forged into spikes framed guard bars barred iron doors, ladders framed balusters walks ways, railing framed work of water tanks and similar work etc complete all as specified and as directed |
| 51 | Material and labour for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed |
| 52 | All as per item No 51 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc complete all as specified and as directed |
| 53 | Supply and fix Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc confirming to Fe 410-W (Gde E-250)Quality \"A\"complete all as specified and as directed |
| 54 | Supply and fix powde coated steel window or ventilators (ECO-4000 series or equivalent) fabrication from roll framed section made of galvanized steel colour / powder coated (base steel as per IS-513 \"D\" quality galvanized as per IS-277 with Zinc coating of 120 gms/ Sqm. with total coated thickness of 0.58 mm section for frame should be of 72mmX55mm, section of mullion should be of 72mmX50mm, section for frame should be of 40mmX20mm, section for fixed glass bead should be of 12mmX12mm, section of fly mesh should be of 40mmmX20mm, section for frame framed glazed shutter and mesh shutter should be cut to length and mitre joined with polypropylene corner brackets, mullions section should be jointed with frame mullion using mullion caps Ethyl Propylene Damien monomer (EPDM) gasket should be used all around glass in shutter and fixed glass spoon section should be used around fly mesh to fix mesh in mesh shutter and including each glazed shutter and mesh shutter should be provided withstainless steel pivot flings-I set, secular handle & secular stay window frame should be fixed to brick / concrete masonry by using Nylon self-expanding caps and driving MS electroplated 800 mm long screwed into the caps through frame including Grill made of 12 mm Sqm bars welded to 150 mm Centre to Centre , 20X5mm MS Flat. total Grill unit should be powder coated and fixed to window frame with screws and including with primer coat of Epoxy primerof 5-7 micron thicks painted with polyester paint 12-16 microns thick of powder coated with polyester up to 50-60 micron thick complete all as specified and as directed.Notes : Wire mesh and glass will be measured and paid separately under relevant items of Schedules |
| 55 | Supply and fix Factory made 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with double rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed |
| 56 | Supply and fix mild steel works conforming to Fe 290 Gde E-165 as in angle iron post and struts in fencing incl cutting tops to shape as directed drilling holes notching for wire etc. incl all necessary drilling, bolting of riveting etc. etc complete all as specified and as directed |
| 57 | Supply and fix of Mild steel screw bolts(Machine made, dia of neck 10mm) with hexagonal or square heads at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square length exc 5cm but not exc 10cm long etc complete all as specified and as directed . |
| 58 | Supply and fixing Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and bindingwith and including mild steel wire (annealed) not less than 0.9mm dia orsecuring with clips all as specified and dir. |
| 59 | Material and labour for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete. (Fe-410W(GdeE-250) quality B |
| 60 | Fixing only galvanised chain link fencing of mesh size(100mmX100mmX4.00mm /75mmX75mmX3.15mm)) size and any type of standards, rails, straining bolts, etc. including provission of binding wire etc complete all as specified and as directed |
| 61 | Supply and fix Galvanised. 2 strand, steelbarbedwire 2.24mm diabarbed with 2mm dia barbs at75mm spacings and strainingand fixing to any type ofstandard rails strain- ingbolts, including, securing ortying at crossings with andprovision of galvanised mildsteel wire, staples or steelpins, etc. as directed (eachline wire to be measured) etc complet all as specified and as directed |
| 62 | Supply only galvanised chain link fencing of mesh size (100mmX100mmX4.00mm /75mmX75mmX3.15mm) etc complete all as specified and as dicected |
| 63 | Supply and fixsteel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St 240complete all as specified and directed. |
| 64 | Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as complete all as specified and as directed. |
| 65 | Material and labour for 100mm thick cement concrete (1:2:4) type B-1(using 20 mm graded stone aggregates) asflooring etc finishing the concrete even and smooth without using extra cement etc complete all as specified and as directed |
| 66 | Material and labour for 100 mm thick plain cement concrete (1:4:8)type D-2 ( using 40 mm graded crushed stone aggregate) as insub base of tiles/floor of hard standing/path etc complete all as specified and directed. |
| 67 | Material and labour for 75 mm thick cement concrete (1:4:8) type D-2 ( using 40 mm graded stone aggregates) asin sub base of flooing etc complete all as specified and as directed |
| 68 | Material and labour for 75 mm thick PCC 1:3:6, type C-1, using 20 mm graded aggregates as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade \"A\" complete all as specified and directed. |
| 69 | Material and labour for cement concrete type B-0 1:2:4 (12.5mm graded stone aggregates) 25 mm thick as in sub base of flooring etc completeall as specified and as directed |
| 70 | Material and labour for coloured glazed ceramic tiles as in vertical surface 300x600mm thick with and including 10mm thick CM 1:4 backing coat, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as directed. |
| 71 | Material and labour forNon - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) laid in floors area of each tile exc. 0.11 sqm but n.exc 0.18 sqm, in floors etc. with and incl 15mm thick screed bed in CM 1:6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed. |
| 72 | Material and labour for coloured glossy finished Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.38 sqm but not exceeding 1.00 sqm in floors etc. with and including 15mm thick screed bed in CM 1:6 ,set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as directed. |
| 73 | All as per item No. 72 above but in vertical surfaces such as skirting and dado, laid over and including 10 mm thick rendering in CM 1:4. complete. |
| 74 | Material and labour for exterior grade, coloured glossyfinish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thickset, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles over etc complete all as specified and directed. |
| 75 | Material and labour for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified & directed. |
| 76 | Material and labour for rendering for ceiling 5 mm thick in CM 1:3 on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed |
| 77 | Material and labour for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surfacefinished and smooth without using extra cement etc complete all as specified and as directed |
| 78 | Material and labour for rendering 15 mm thick in CM (1:4) on other than fair faces of brick work or concrete surface mixed with water proofing compound where ever is reqd as per manufacture instruction finished even and smooth without using extra cement etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately |
| 79 | Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed |
| 80 | Material and labour for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed |
| 81 | Material and labour for 10 mm cement plastering in CM (1:3) as in horizontal and vertical surface of brick work or concrete surface mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately |
| 82 | Material and labour for applying APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017, 3mm thick and weighing not less than 3.60kg/Sqm reinforced with non woven polyster/HMHDPE matt black finished over compatible primer/bonding bitumen @ 0.40 Litr/Sqm and torch applications of membrane with 75mm side overlap and 100mm end lap after necessary preparation of surface complete as per manufacturer\"s instructions and applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sqm complete all as specified and directed. complete all as directed. |
| 83 | Material and labour for preparation of newly plastered surfaces of wall and applying two coats of acrylic distemper over a coat of primer including 1.00mm thick wall care putty complete all as specified and as directed. |
| 84 | Material and labour for prepration of newaly plastered surface of wall,applying a coat ofwall care putty not less than 1.00 mm thick and two coat ofacrylic exterior weather resistant paint (weather proof paint) of tint as approved over one coat of External weather coat primer etc complete all as specified and directed . |
| 85 | Material and labour for preparing newely plastered surface of ceilingand applying two coats of acyrlicdistemper over a coat of primer over 1.00mm thick wall care putty complete all as specified and as directed. |
| 86 | Material and labour for preparing newly plastered surface of wall and applying two coat of cement base paintover a coat of primer etc complete all as specified and as directed |
| 87 | Material and labour for preparation of newly plastered surface of wall or concrete surfaces and applying three coats of white wash etc complete all as specified and as directed |
| 88 | Material and labour preparationnewly plasteredsurface and applying three coat of white wash on ceiling complete all as specified and as directed |
| 89 | Supply and fix 4mm thick sheet glass ofordinary quality and glazing with oil putty or wooden beading to wooden frame or steel framein squares n exc 0.50 sqm in each pane complete all as specified and as directed |
| 90 | Supply and fix 4mm thick figured glass, pin head type and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed |
| 91 | Material and labour for preparation of new woodensurfaces of any description exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed. |
| 92 | Material and labour for preparation of new steel surfaces of any descriptionn. exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 93 | Material and labour for preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed |
| 94 | Supply and fix GI tubes, 15 mm dia bore of pies \"medium gradegalvanised, withall fitting andfixed completeto walls andceilings or laidin floors etc complete all as specified and as directed |
| 95 | Supply and fix GI tubes, 20 mm dia bore of pies \"medium gradegalvanised, withall fitting andfixed completeto walls andceilings or laidin floors etc complete all as specified and as directed |
| 96 | Supply and fix rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs incl 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc complete all as specified and directed |
| 97 | Supply and fix15 mm dia bore three in one chromium plated wall mixer with L Bend for Hot and cold water, screwed down for iron pipes and fixed etcetc complete all as specified and as directed |
| 98 | Supply and fix15 mm dia bore central hole basin mixer (Brass) for Hot and cold water, screwed down for iron pipes and fixed etcetc complete all as specified and as directed |
| 99 | Supply and fix 15 mm dia bore chromium plated bib taps, fancy type long body withcrutch orbutterflyhandle, screwed down, screwed foriron pipe or forbrass ferrule andfixed etc complete all as specified and as directed |
| 100 | Supply and fix 15 mm dia bore chromium plated fancy type long body stop valves/ angle cock castcopper alloy,screweddown,highpressure,withcrutch or butterfly handle,screwed bothends forironpipe orforunions and fixed etc complete all as specified and as directed |
| 101 | Supply and fix 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and as directed |
| 102 | Supply and fix 125 mm, dia chromium plated, swivel type shower rose with 190 mm long chromium plated shower arm and wall flange suitable for fixing 15 mm bore iron pipe complete all as specified and as directed. |
| 103 | Supply and fix 110 mmPVC, SWR pipes, single socketed in any length with rubber ring joint fixed to walls etc etc complete all as specified and directed |
| 104 | Supply and fix PVC (SWR) pipe 110 mm bore single socketed in any length with adhesivejoint fixed to laid in trenches complete as specified complete all as specified. |
| 105 | Supply and fix PVC bends (any radius) of 110mm dia with access door etc complete all as specified and as directed |
| 106 | PVC (SWR) bends/shoe of any radius for 110 mm bore complete all as specified. |
| 107 | Supply and fix 75 mmPVC, SWR pipes, single socketed in any length with rubber ring joint fixed to walls etc complete all as specified and directed |
| 108 | Supply and fix PVC (SWR) pipe 75 mm bore single socketed in any length with rubber ring joints laid in trenches or in floor complete as specified complete all as specified. |
| 109 | Supply and fix PVC (SWR) vent cowl for110 mmbore pipe complete as specified complete all as specified. |
| 110 | Supply and fix PVC bends (any radius) of 75mm dia with access dooretc complete all as specified and as directed |
| 111 | PVC (SWR) bends/shoe of any radius for 75 mm bore complete as specified complete all as specified. |
| 112 | Supply and fix vitreous china wash down water closet pan(Pedestal Pan) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat , black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc, coloured closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed |
| 113 | Material and labour for Vitreous china urinal, half stall white (excluding flushing cisterrn) including urinal spreader, PVC connection, 40mm PVC waste pipe & 40mm waste coupling providing and fixing plugs, bedding urinal against wall in mortar 1:2, securing urinal to plug, with and including 60mm long screws, pointing around urinal back in cement, fixing flush pipe, grating and union for discharge pipe complete all as specified. |
| 114 | Supply and fixSoap dish, any type, fixed toplugs with chromium platedbrass screws etc complete all as specified and as directed |
| 115 | Supply and fix 0.85 mm thick stainless steel kitchen plate rack of size 786mmx610x254mm including fixing with Rawal plug and screw complete all as specified and as directed. |
| 116 | Supply and fix vitreous china counter wash basin of oval shape ofsize 560X410mm excluding taps, waste, chain & plug and porcelain stopper but including brackets and including, 32 mm bore waste CP couplingand 32mm bore LDPE pipe 600 mm long and 15 mm bore 450 mm long PVC connection etc complete all as specified and directed. |
| 117 | Supply and fix PVCflushing cisrern valveless with flushing out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets & connection to pipe etc 15 mm dai bore PVC connection 450 mm long complete all as specifiedand as directed |
| 118 | Supply and fixGrating doom 125mm dia with waste hole of PTMT (Min weight 40 gms). complete all as specified and directed. |
| 119 | Supply and fix CP Health faucet brass CP for 15 mm bore pipe with CP pipe of 1 Mtr length complete all as specified and directed. |
| 120 | Supply and fix chromium plated toilet paper holder complete all as specified and directed. |
| 121 | Supply and fix 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as directed |
| 122 | Supply and fix75 mm dia bore PVC (SWR) multi floor trap with grating including jointing with solvent cement etc complete all as specified and as directed |
| 123 | Material and labour for cement concrete bed to drain pipes including packing under and haunching againstthe sides of pipe after they are laid & tested for 150 mm bore of pipe withcement concrete 1:4:8 type D-2 using 40mm graded stone aggregatecomplete all as specified and directed. |
| 124 | Material and labour Concrete bed in cement concrete 1:3:6 type C-2 to drain pipes 150 mm bore Pipe including packing under, and haunching against the sides of pipes after they are laid and tested in complete all as specified and directed. |
| 125 | Supply and fix SGSW pipes 150 mm bore single socketed, in any lengthwith rubber ring joints, laid in trenches or in floorsand jointed complete all as specified and directed. |
| 126 | Material and labour for Soakage well excavation 1.2 dia x 3.0 meter effective depth , in any type of soil, foundation in PCC 1:3:6 walls of honey combed masonry with top ring ofRCC 1:15:3 concrete including intercepting chamber and screen chamber made of brick masonry in CM , RCC cover slab in of 1:1.5 :3 (with using 20 m graded stone aggregates) , interconneting pipes of SGSW pipes etccomplete all as specified and as directed |
| 127 | Material and labour for RCC septic tank capacity upto 10 users designed to carry sewage and sullage water excavation of any type of soil PCC 1:4:8 below foundation, RCC Nominal mix 1:1:5:3 (with using 20 mm graded stone aggregates) in walls, base slab, baffle wall and roof slab including beams etc with vent shaft manhole opening with cover connection etc, complete with effective depth of 1.5 meterand overall depth of 3.0 meter. |
| 128 | Material and labour for point wiring with 1.5 sqmm, single core, PVC insulated and PVC unsheathedFR-LSH cable, 1100 volts grade IS-694marked, with multistranded copper conductors and earthcontinuity wire with 1.5 Sqmm copper conductor cable (including connecting to earth dolly)laid/fixed with and including PVC rigid conduit on walls/ceiling (concealed),with MS/PVC terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulators etc. including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly for one light or fan point controlled by one 5 Amp switch one way complete all as specified and as directed. |
| 129 | All as per item serial No 128 here-in-before but One 3 pin socket outlet 6 amps on the same board with other switches complete all as specified and as directed. |
| 130 | All as per item serial No 128 here-in-before but One socket outlet 3 pin 6 Amp on independent board complete all as specified and as directed. |
| 131 | All as per item serial No 128 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cable for 6 pin 15 Amp socket outlet on independent board and earth continuity wire with 2.5 sqmm cable. complete all as specified and as directed. |
| 132 | Supply and fixswitch modular type 6 Amp 240 Volts single one way (ISI marked) complete all as specified and as directed. |
| 133 | Supply and fix modular socket, 6 Amp 2/3 pin combined, 2 module complete all as specified and as directed. |
| 134 | Supply and fixmodular switch 1 way 16 amp, 1 module complete all as specified and as directed. |
| 135 | Supply and fix modular socket, 16 Amp 2/3 pin combined, 2 module complete all as specified and as directed. |
| 136 | Supply and fix ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and as directed. |
| 137 | Supply and fixmodular lamp holder ,PVC/Polycarbonate type with back plate suitablefor batten fittings complete all as specified and as directed. |
| 138 | Supply and fix stepped type electronic fan regulator, two module size, flush type complete all as specified and as directed. |
| 139 | Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 240 V complete all as specified and as directed. |
| 140 | Supply and fixmodular white cover plate with frame, 2 module complete all as specified and as directed. |
| 141 | Supply and fix modular white cover plate with frame, 4 module complete all as specified and as directed. |
| 142 | Supply and fix modular white cover plate with frame, 6 module complete all as specified and as directed. |
| 143 | Supply and fix modular white cover plate with frame, 8 module complete all as specified and as directed. |
| 144 | Supply and fix metal flush box 4 module for modular switches complete all as specified and as directed. |
| 145 | Supply and fix metal flush box 6 module for modular switches complete all as specified and as directed. |
| 146 | Supply and fixmetal flush box 8 module for modular switches complete all as specified and as directed. |
| 147 | Supply and fixmetal flush box 1/2 module for modular switches complete all as specified and as directed. |
| 148 | Supply and fixingLED lights fitting 1x 20W, 220V, AC decorative batten type connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 149 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 150 | Supply and fixLED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 151 | Supply and fix factory made, sheet steel distribution boards, TPN, 4 Way,double door IP- 43 ,with provision for FP MCB as incomer and SP MCBs as outgoing complete and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and as directed. |
| 152 | Supply and fix MCB DB of sheet metal enclosure IP-43 double door SPN 8 way with 200 A rated bus barand grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and as directed. |
| 153 | Supply and fixMCB Tripple pole & neutral 40 to 100 Amps in accordance with IS/IEC 60898-1, 415 V, 50 Hz,10 kA,C-series rupturing capacity providing in DB complete all as specified and as directed. |
| 154 | Supply and fix MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA,C-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and as directed. |
| 155 | Supply and fixMCBs, SPN 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and as directed. |
| 156 | Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 157 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed. |
| 158 | Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm burieddirectly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etcRCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate)including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 complete all as specified and as directed. |
| 159 | Supply, fixing and testing of Storage type electric water heater of capacity 25 ltrs with BEE 5 star rated, 230 V, maximum power consumption 2 KW, Drypower Fero Glas caoting Technology for inner container and Heavy Duty seamless Incoloy 800 Glass lined heating element, vertical wall mounting complete with all accesories and PVC connecting pipe with whirl technology 15 mm bore 450mm long 2 Nos for hot and cold water supply with two years warrenty on product and 5 years warranty on inner container complete all as specified and as directed. |
| 160 | Supply and fix LED 60 W building secruity light made up of pressure die cast housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07 and suitable for dia upto 43 mm complete all as specified and directed. |
| 161 | Supply and fixing building secruity light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. |
| 162 | Material and labour forbuilding secruity light bracket made out of 40 mm bore light grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape for fixing street light luminaries all as directed, length of GI Pipe shall not be less than 2.0 mtrs complete all as specified and directed. |
| 163 | Supply and lay GI tubing 40 mm bore light grade for cable protection and fixing to the existing pole with flat iron clamp 25x 3mm including nut bolts complete all as specified and as directed. |
| 164 | Material and labour forwiring with 2 runs of 6 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith single run of 6 sqmm single core FR-LSHPVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completioncomplete all as specified and directed. Note: 2 run of 6 Sqmm cable and 1 run of 6 Sqmm cable along with conduit altogether shall be measured as one unit. |
| 165 | Material and labour for Sub main wiring with 2 runs of 4.0 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dia non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4.0 sqmm single core FR-LSHPVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion complete all as specified and directed. Note: 2 run of 4 Sqmm cable and 1 run of 4 Sqmm cable along with conduit altogether shall be measured as one unit. |
| 166 | Supply and fix steel tubes medium grade galvanised 25 mm bore with all fittings and fixed complete to walls and ceilings and laid in floors complete all as directed. |
| 167 | Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 25mm bore complete all as specified and directed |
| 168 | Material and labour for Cutting existing steel tubing of 40mm for alterations or additions complete all as specified and directed |
| 169 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete all as specified and directed |
| 170 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 core complete all as specified and directed |
| 171 | Supply and spreading clean dry river sand in cable trenches as in cable cushioning complete all as specified and as directed. (Note: Punnedthickness shall be measured and paid) complete all as specified and directed |
| 172 | Material and labour for bricks sub class ‘B’ brick old size for cable protection laid in flat in trenches over the cable perpendicular to the direction of cable complete all as specified and directed |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
