|
| 1 | Dismantling of plain or corrugated steel sheeting, any gauge or any thickness as in roof covering, wall cladding etc., completeall as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) area n.exc. 1.5 Sqm including builders hardwareeach complete all as specified and as directed. |
| 3 | Taking down chowkats or frames with shutters(without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm each including builders hardware complete all as specified and as directed. |
| 4 | Demolation of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided,complete all as specified and as directed. |
| 6 | Demolition of brick work built in cement mortar including all quoins, arches, pillar including coping etc. complete all as specified and as directed. |
| 7 | Dismantling of stone slabs and tiles of andy description or thickness as on platform, shelves, floors etc laid, bedded and pointed in any mortar complete all as specified and as directed. |
| 8 | Taking down cement plaster on walls, chajja surfaces, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed. |
| 9 | Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed. |
| 10 | Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation or for shafts, wells cesspits,man holes, laying of cable etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed. |
| 11 | Returning, filling, in soil including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and as directed. |
| 12 | Removing excavated soil to distance not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point etc complete all as specified and as directed. |
| 13 | Material and labour for hardcore of broken or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface etc complete all as specified and as directed. |
| 14 | Material and labour for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 15 | Material and labour for PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete etc. complete all as specified and as directed. |
| 16 | Material and labour for PCC 1:2:4 type B1 ( using 20mm graded stone aggregate) as.in foundations, filling and mass concrete, postetc complete all as specified and as directed. |
| 17 | Supply only water proofing compound, ISI marked complete all as specified and as directed. |
| 18 | Material and labour for Brick work with sub class \"B\" old size built in CM 1:6, straight or curved on plan exc 6m mean radius on plan complete all as specified and directed. |
| 19 | Material and labour for Brick work with sub class \"B\" old size built in CM 1:4, straight or curved on plan exc 6m mean radius on plan complete all as specified and directed. |
| 20 | Material and labour for half brick work with sub class \"B\" old size built in CM 1:4, straight or curved on plan exc 6m mean radius on plan complete all as specified and directed. |
| 21 | Supply and fix 30 mm thcik flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 22 | Material and labour for 125 mm size butt hinges, heavy weight, cold rolled mild steel,complete all as specified and as directed. |
| 23 | Material and labour for 100 mm size stainless steel butt hinges medium weight, complete all as specified and as directed. |
| 24 | Material and labour for 200 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed. |
| 25 | Material and labour for 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded sectionor cast aluminum alloy complete all as specified and as directed. |
| 26 | Supply and fixmild steel sliding door bolts, 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed. |
| 27 | Material and labour for 150 mm extruded aluminum alloy handles, fabricated type, anodized complete all as specified and as directed |
| 28 | Material and labour for 150 mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed |
| 29 | Supply and fix steel windows with side hung shutters glazed shutter including both side openable (out side glazed window and inside fly proof window)including projecting type hinges with steel handle and steel peg stay complete with glazing bars and 12 mm square bar or round bar of approved design welded to steel window frame dovetailed or welded complete all as specified and directed . Note: Guard bar or square bar shall be measure and paid separately. |
| 30 | Supply and fix mild steel framed work such as grills,gratings,etc.with ends of bars shouldered and/or riveted,or forged into spikes,framed guard bars, barred iron doors,ladders, framed balusters, walk ways,railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed |
| 31 | Supply and fix pressed steel frames for doors of size 105mmx60mmx1.25mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed |
| 32 | Supply and fix roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conformingto Fe 410 -W (Gde- E- 250) quality- A complete all as specified and as directed |
| 33 | Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as complete all as specified and as directed. |
| 34 | Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as specified and as directedNote: To be executed for provison of ridges and hips, valley etc complete all as specifed and as directed |
| 35 | Material and labour for 100 mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate)as infloor etc complete all as specified and as directed. |
| 36 | Material and labour for 40 mm thick PCC 1:2:4 type B2 ( using 20 mm graded stone aggregate ) as in sub floor finishing cement complete all as specified and as directed. |
| 37 | Material and labour for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smoothwithout using extra cementcomplete all as specified and as directed. |
| 38 | Material and labour for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade fixed with grey cement and pigment complete all as specified and as directed. |
| 39 | Material and labour for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 40 | Material and labour for 15 mm thick rendering in cement mortar (1:4) using water proofing compound @ 2 % by weight of cement in finish coat on other than fair faces of brick wall suerfaces, finished even and smooth without using extra cement complete. Note:- water proofing compound shall be measured and paid separately. |
| 41 | Material and labour for preparation of newly plastered surfaces of walls and applying three coats of white washcomplete all as specified and as directed. |
| 42 | Material and labour for complete removal of old treated surfaces on wallsand applying one coat of alkali resistant primer and applying two coats of cement based paintcomplete all as specified and directed. |
| 43 | Material and labour for preparation of new surfaces of wall complete removal by washing, rubbing down dirty surface during fixing of aluminium windows etc andapplying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gMaterial and labouritre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqmcomplete, all as specified and as directed. |
| 44 | Material and labour for preparation of old surfaces of wall complete removal by washing, rubbing down dirty surface during fixing of aluminium windows etc andapplying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gMaterial and labouritre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqmcomplete, all as specified and as directed. |
| 45 | Material and labour 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and as directed. |
| 46 | Material and labour for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 47 | Material and labour for preparation of new steel surface of any description,n.exc 10cm width or girth and applying two coats synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed. |
| 48 | Material and labour for preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coats of synthetic enamel paint complete. |
| 49 | Materials and labour for Cement concrete work in pavement/ hard-standing of flexural strength 40 KG/per square centimetre in field using 400 KG of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and as directed. |
| 50 | Materials and labour for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade \"A\" complete all as specified and as directed. |
| 51 | Materials and labour forming Construction joint 40mm deep x 10mm wide filled with sealing compound grade \"A\" complete all as specified and directed. |
| 52 | Materials and labour for forming 12mm expansion joint filled with pre - formed bituminous filler and top 30 mm primed and sealed with sealing compound, grade \"B\" thickness of the concrete slab 250mm complete all as specified and as directed. |
| 53 | Materials and labourfor construction of brick culvert with RCC slab 7.13 mtr x 0.6 mtr using DRG NO STD 784 SH 1/1 complete all as specified and as directed. |
| 54 | Supply and fixing150 mm dia PVC (SWR) pipes, having , single socketed in any length with rubber ring jointslaid in trenchesas in waste / soil pipe complete all as specified and as directed. |
