|
| 1 | Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed. |
| 2 | Excavating in post holes (or similar holes) each not exceeding0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc50m and making good surfaces in soft/loose soil complete all as specified and as directed. |
| 3 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in Soft / Loose etc complete all as specified and as directed |
| 4 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed. |
| 5 | Removal of surplus excavated soil to a distance exc 250m but nexc 500m and depositing as directed at a level n exc 1.5m from the starting point complete all as specified and as directed. |
| 6 | Material and labour for hardcore of broken or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 7 | Material and labour for sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed. |
| 8 | Material and labour for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc complete all as specified and as directed. |
| 9 | Material and labour for PCC 1:4:8 type D2 (using 40mm grade stone aggregate ) as in foundation /mass concrete complete all as specified and as directed. |
| 10 | Material and labour for RCC M-25 (20mm graded stone aggregate) design mix as in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under-reamed piles and mass concrete etc complete all as specified and as directed. |
| 11 | Material and labour for RCC M-25 (20mm graded stone aggregate) design mix as in Column complete all as specified and as directed. |
| 12 | Material and labour for RCC M-25 (20mm graded stone aggregate) design mix as inBeam,cantilevers, lintelscomplete all as specified and as directed. |
| 13 | Material and labour for PCC 1:3:6 type C0 (using 12.5mm graded stone aggregate) as infilling of hollow steel frames of any size complete all as specified and as directed. |
| 14 | Material and labour for PCC 1:2:4 type B0 (using 12.50 mm graded crushed stone aggregate) for coping on brick work,kerbs,slightly rounded or chamfered angles and throating, complete all as specified and as directed. |
| 15 | Supply only liquid water proofing compound of approved complete all as specified and as directed. |
| 16 | Material and labour for brick work with old size sub class \"B\" bricks straight or curved on plan exc. 6m mean radius and built in CM 1:6 etc complete all as specified and as directed. |
| 17 | Material and labour for brick work with sub class \"B\" bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and as directed. |
| 18 | Material and labour for brick work with subclass ‘B’ bricks, (locally available best quality) straight or curved on plan to any radius in half brick thick wall, built in cement mortar (1:4) complete all as specified and as directed. |
| 19 | Material and labour for Damp proof course 40 mm thick in cement concrete 1:2:4 type B 0 to horizontal or vertical surfaces including necessary formwork and applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m complete all as specified and as directed. |
| 20 | Material and labour for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed. |
| 21 | Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed. |
| 22 | Material and labour for formwork to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified and as directed. |
| 23 | Refixing wooden or aluminium door shutters of any description not exceeding 2 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware, glass etc as required and renewal of unserviceable screws complete all as specified and as directed. |
| 24 | Supply and fix 2nd class hardwood 35mm thick skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.24 (a); supplied and fitted to chowkats etc complete all as specified and as directed. |
| 25 | Supply and fix 30mm thickflush shutters solid core construction with particle board core and plywood face panels commercial type on both side complete all as specified and as directed. |
| 26 | Supply and fix Factory Made Solid PVC Moulded Door Shutter, with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm prelam PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing complete all as specified and as directed. |
| 27 | Material and labour for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification and drawing etc complete all as specified and as directed. |
| 28 | Supply and fix 150 mm size aluminum anodised, barrel tower bolts of extruded section etc complete all as specified and as directed. |
| 29 | Supply and fix aluminum alloy anodised, sliding door bolts with hasp and staple, (bolt type) and fixing clips of sheets, cast or extruded section and fixing boltand sliding bolts of extruded section or cast aluminium alloy and fixed 300mm long etc complete all as specified and as directed. |
| 30 | Supply and fix 100mm sizebutt hinges, medium weight, stainless steel, and fixed etc complete all as specified and as directed. |
| 31 | Supply and fix steel helical door spring 300 mm sizerat tail rod pattern spring, including roller and roller plate complete all as specified and as directed. |
| 32 | Supply and fix 150 mm long extruded anodized aluminum alloy handles, fabricated type,etc complete all as specified and as directed. |
| 33 | Supply and fix 100 mm long extruded anodized aluminum alloy handles, fabricated type,etc complete all as specified and as directed. |
| 34 | Supply and fix Stainless steel Curtain Rod 25mm dia/bore (as approved) includingfixing stainless steel Bracket(shaped as approved) not less than 80mm longto wall with Screws/ securedwith stainless steel side doom(as approved) fitted/tightened on Curtain Rod at both ends with screw including taking down old curtain rod of any description and knob, complete all as specified and as directed. |
| 35 | Supply and fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed. |
| 36 | Supply and fix fancy type Brass chromium plated 600mm long towel rod \"D\" type fixed with screws and wooden/plastic cleats etc complete all as specified and as directed. |
| 37 | Supply and fix of steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 as in main and cross beams, hip and jack rafters; purlins, truss where connected to common raftersfixed with angle cleats or other connecting plates complete all as specified and as directed. |
| 38 | Supply and fix rolled mild steel plates ( plain or chequrred) channels, 5mm thick or over square cut or notched ( ordinary or counter sunk)forming holes, without any attachmentconfirming to Fe-410-W (Gde-E-250) quality Acomplete all as specified and as directed. |
| 39 | Supply and fix Rolled mld steel roof trusses ( framed) trussed purlins, crane gantries, rails and fastenings and heavy brackets framing ( Beam, tee, angle, channel or flat section) including distace pieces, cleats etcconfirming to Fe 410-W ( Gde E-250 Quality A) complete all as specified and as directed. |
| 40 | Material and labour for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,of Diameter of neck in 11-15 mm exc 5cm long but n exc 10 cm complete all as specified and as directed. |
| 41 | Material and labour TMTsteel bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 42 | Material and labour TMTsteel bars5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed. |
| 43 | Supply and fix steel windows with side hung shutters both mosquito proof and glazed shutter including projecting type/ box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded etc complete all as specified and as directed. |
| 44 | Supply and fix steel ventilator with top hung shutter including hinges, steel peg stay, complete with glazing bars, dovetailed or welded etc complete all as specified and as directed. |
| 45 | Material and labour for 1.25 mm thick mild steel pressed steel frames of size 125 x 60 mm for doors with double rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed. |
| 46 | Material and labour for framed work as in grills, grating etc with ends of bars shouldered and / or riveted or forged into spikes framed guard bars barred iron doors, ladders framed balusters walks ways, railing framed work of water tanks and similar work etc complete all as specified and as directed |
| 47 | Dismantling Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coveringsany gauge, thickness,as in valley gutter, ridge of roof, wall and cladding etc complete all as specified and as directed |
| 48 | Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as complete all as specified and as directed. |
| 49 | Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as specified and as directedNote: To be executed for provison of ridges and hips, valley etc complete all as specifed and as directed |
| 50 | Material and labour for suspended false ceiling using E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600mm x 4mm thick with main runner 34 mm x 24 mm, 0.7mm thick, cross runner 24mm x 24mm 0.7mm thick and wall angle 24mm x 24mm with GI powder coating at bottom of runner and wall angle in a grid of GI system duly suspended with 3mmdia GI wire fixed with steel dash fasteners or iron purline from the roof with adjustment clip providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm gridas specified in SSR Part-II 2020(Rates) complete all as specified and as directed. |
| 51 | Material and labour for 100mm thickcement concrete 1:2:4, type B-1, ( using 20 mm graded stone aggregate) as in floor, hard standing finished even and fair without using extra cement (for disturbed portion of Hard standing). complete all as specified and as directed. |
| 52 | Material and labour for cement concrete 1:4:8 type D-2, (Using 40mm graded stone aggregate) 75mm thick as in sub base complete all as specified and as directed. |
| 53 | Material and labour for 25 mm thick PCC (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) as in floor finished rough to receive tiles complete all as specified and as directed. |
| 54 | Material and labour for PCC (1:3:6) type C-1(20 mm graded aggregated), 75 mm thick as in plinth protection complete all as specified and as directed. |
| 55 | Material and labour for 75mm thickcement concrete 1:2:4, type B-1, (using 20 mm graded stone aggregate) as in floor, hard standing etc finished even and smooth without using extra cement. complete all as specified and as directed. |
| 56 | Material and labour for 75mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in leveling course finish the surfaces even and rough to receiving the tiles complete all as specified and as directed. |
| 57 | Roughening surface of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etccomplete all as specified and as directed. |
| 58 | Material and labour for glazed ceramic coloured tiles in vertical surface450X 300X 7mm thick with and including 10mm thick CM 1:4 backing coat, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and as directed. |
| 59 | Material and labour forNon - skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) laid in floors area of each tile not exc. 0.11 sqmin floors etc. with and incl 15mm thick screed bed in CM 1:6 , set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed. |
| 60 | Material and labour for coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. with and including 15mm thick screed bed in CM 1:6 ,set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed. |
| 61 | Material and labour for coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in vertical surfaces such as skirting and dado, laid over and including 10 mm thick rendering in CM 1:4. complete all as specified and as directed. |
| 62 | Material and labour heavy duty parking tiles of size 300mmX300mmX10to 12 mm thick of approved make jointed in neat cement slurry, pointed in white or coloured cement to match colour of tiles, over and including 20 mm thickscreed bed in cement mortar 1:6 complete all as specified and as directed.complete all as specified and as directed. |
| 63 | Taking down cement plaster of any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 64 | Material and labour for rendering 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfces finished even and smooth without using extra cementcomplete all as specified and as directed |
| 65 | Material and labourfor 10 mm thick rendering in CM 1:6 on brick/ concrete surfaces and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed |
| 66 | Material and labour 15mm thick rendering in two layers(10+5mm) externally on brick or concrete surfaces in CM 1:4 mixed with liquid WPC @ 200 ml/50 kgby weight of cement or as per manufacturer instructions on top layer, finished even and smooth without using extra cement complete all as specified and as directed.. |
| 67 | Material and labour for 5mm thick renderingon fair faces of brick or concrete ceiling surfacein CM 1:3 finished even and smooth with out using extra cement complete all as specified and as directed. |
| 68 | Material and labour for preparation of newly plastered surfaces of wall and applying two coats of acrylic distemper over a coat of primer over 1mm thick putty complete all as specified and as directed. |
| 69 | Material and labourfor prepration of newaly plastered surface of wall,applying a coat ofwall care putty not less than 1.0 mm thick and two coat ofacrylic exterior weather resistant paint (weather proof paint) of tint as approved over one coat of alkli and fungal resistant primer complete all as specified and directed . |
| 70 | Material and labour for preparation of new plastered surface of walls and applying three coats of white wash complete all as specified and as directed. |
| 71 | Material and labour for preparing of newly plastered ceilingsurface andapplying three coats of whitewash complete all as specified and as directed. |
| 72 | Material and labour for preparation of old distempered surface of wall including cornices etc. by washing, rubbing down,scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and stopping of distempered surfaces and applying one coat of acrylic distemper of approved shade on surface of wall complete all as specified and as directed. |
| 73 | Material and labour for preparing of old plastered ceilingsurface andapplying one coats of whitewash complete all as specified and as directed. |
| 74 | Supply and fix 3.00 mm thick sheet glass fixed in window shutters etc complete all as specified and as directed. |
| 75 | Supply and fix 4.00 mm thickfigured glass pin headed type fixed in ventillators etc complete all as specified and as directed. |
| 76 | Material and labour for preparation of new wood surfaces exc 10 cm width/girth and applying two coats of synthethic enamel paint over a coat of primer etc complete all as specified and as directed. |
| 77 | Material and labour for preparation of new steel surfacesexc 10 cm width/girth and applying two coats of synthethic enamel paint over a coat of primer etc complete all as specified and as directed. |
| 78 | Material and labour for preparation of old painted surface of wood and wood based materials by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spotsof any discription, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and as directed. |
| 79 | Material and labour for preparation of old painted surface of steel and iron by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spotsof any discription, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and as directed. |
| 80 | Material and labour for 15 mm bore of tube medium grade Galvanised steel water tubing with all fittings and fixed complete to walls, cutings or laid in floor including taking steel tubing with connections etc complete all as specified and as directed. |
| 81 | Material and labour for 20 mm bore of tube medium grade Galvanised steel water tubing with all fittings and fixed complete to walls, cutings or laid in floor including taking steel tubing with connections etc complete all as specified and as directed. |
| 82 | Supply and fix 1000 litres capacity rotational moulded polyethylene water storage tanks with 20mm bore ball brass valves, high pressure, with polyethylene float and fly nut (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I etc complete all as specified and as directed. |
| 83 | Supply and fix 15mm bore bib taps, chromium plated cast copper alloy quarter turn long body screwed down, screwed for iron pipe etc complete all as specified and as directed. |
| 84 | Supply and fix 15mm bore pillar taps, chromium plated cast copper alloy quarter turn long body screwed down, screwed for iron pipe etc complete all as specified and as directed. |
| 85 | Supply and fix 15mm size fancy type chromum plated Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedetc complete all as specified and as directed. |
| 86 | Supply and fix 20mm bore gun metal globe or gate valves with iron wheel head screwed both ends for iron pipeetc complete all as specified and as directed. |
| 87 | Supply and fix PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and as directed. |
| 88 | Supply and fix 110mm bore of pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to wallsetc complete all as specified and as directed. |
| 89 | Supply and fix PVC (SWR) 110mm bore pipes single socketed, in any length with rubber ring joints, laid in tranches or in floors including haunching complete all as specified and as directed. |
| 90 | Supply and fix 110 mm bore of pipe PVC (SWR) plain bends any radius etc complete all as specified and as directed. |
| 91 | Supply and fix 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 92 | Supply and fix 75 mm dia PVC (SWR) bends of any radius complete all as specified and as directed. |
| 93 | Material and labour for PCC 1:4:8 type D-2 ( 40mm graded stone aggregate) as in concrete bed to drain pipe 110/150 mm dia including packing under , and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 94 | Supply and fix PVC Nahani trap with diameter of outlet 75mmwith grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc complete all as specified and as directed. |
| 95 | Supply and fix glazed earthen ware viterous china squatting pan, `Orissa\" pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) white coloured etc complete all as specified and as directed. |
| 96 | Supply and fix glazed earthen ware viterious china wash basin white coloured flat back size 550x400mm, outlet of 32mm bore HDPE outlet pipe with necessary fittings, 32mm bore brass CP waste couplings etc complete all as specified and as directed. |
| 97 | Supply and fix10 Litres, PVC valveless syphonic action type, flushing Cistern, low level, white inlet, ball valve, float, and brackets inclluding 32mm PVC flush pipe suitable for flushing cistern complete all as specified and as directed. |
| 98 | Supply and fix 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as specified and as directed. |
| 99 | Supply and fix fancy type Brass chromium plated soap dish fixed with screws and wooden/plastic cleats etc complete all as specified and as directed. |
| 100 | Material and labour for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade \"A\" complete all as specified and as directed. |
| 101 | Material and labour for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade A complete all as specified and as directed. |
| 102 | Material and labourfor 100mm thickPCC (1:4:8) type D2 as in sub base of floor complete all as specified and as directed. |
| 103 | Material and labour for Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn in and including PVC Conceled Conduit with all accessories including fabricated MS/PVC terminal boxes fixed flush box and cover plate ( for modular Switch socket ) with wall surfacefor mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as specified and as directed. |
| 104 | All as per item serial No 103here-in-before but One 3 pin socket outlet 6 amps on the same board with other switches complete all as specified and as directed. |
| 105 | All as per item serial No 103 here-in-before but One socket outlet 3 pin 6 Amp on independent board complete all as specified and as directed. |
| 106 | All as per item serial No 103 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cable for 6 pin 15 Amp socket outlet on independent board and earth continuity wire with 2.5 sqmm cable complete all as specified and as directed. |
| 107 | Supply and fix switch modular type 6 Amp 240 Volts single one way (ISI marked) complete all as specified and as directed. |
| 108 | Supply and fix modular socket, 6 Amp 2/3 pin combined, 2 module complete all as specified and as directed. |
| 109 | Supply and fixmodular switch 1 way 16 amp, 1 module complete all as specified and as directed. |
| 110 | Supply and fixmodular socket, 16 Amp 2/3 pin combined, 2 module complete all as specified and as directed. |
| 111 | Supply and fixstepped type modular electronic fan regulator, two module size, flush type complete all as specified and as directed. |
| 112 | Supply and fixceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as specified and as directed. |
| 113 | Supply and fixmodular lamp holder ,PVC/Polycarbonate type with back plate suitablefor batten fittings complete all as specified and as directed. |
| 114 | Supply and fix LED lights fitting 1x 20W, 220V, AC decorative batten type connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 115 | Supply and fixLED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 116 | Supply and fixMCB DB of sheet metal enclosure double door SPN 8 way with 200 A rated bus barand grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and as directed. |
| 117 | Supply and fixMCB DB of sheet metal enclosure double door SPN 4 way with 200 A rated bus barand grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and as directed. |
| 118 | Supply and fixMCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA,C-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and as directed. |
| 119 | Supply and fixMCBs, SPN 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and as directed. |
| 120 | Supply and fixing ceiling fans complete with blades, down rods,and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 121 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep, 1400 rpm with blades, and frame and louvers complete all as specified and directed. |
| 122 | Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm burieddirectly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etcRCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate)including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 |
| 123 | Supply and fixLED 60 W building secruity light made up of pressure die cast housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07 and suitable for dia upto 43 mm complete all as specified and directed. |
| 124 | Material and labour forbuilding secruity light bracket made out of 40 mm bore light grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape for fixing street light luminaries all as directed, length of GI Pipe shall not be less than 2.0 mtrs complete all as specified and directed. |
| 125 | Material and labour for Sub main wiring with 2 runs of 4.0 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dia non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4.0 sqmm single core FR-LSHPVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion complete all as specified and directed. Note: 2 run of 4 Sqmm cable and 1 run of 4 Sqmm cable along with conduit altogether shall be measured as one unit. |
| 126 | Supply and fix steel tubes medium grade galvanised 25 mm bore with all fittings and fixed complete to walls and ceilings and laid in floors complete all as directed. |
| 127 | Supply and fix Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 25mm bore complete all as specified and directed |
| 128 | Material and labour cutting existing steel tubing of 40mm for alterations or additions complete all as specified and directed |
| 129 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 4 core complete all as specified and directed |
| 130 | Supply and spreading clean dry river sand in cable trenches as in cable cushioning complete all as specified and as directed. (Note: Punnedthickness shall be measured and paid) complete all as specified and directed |
| 131 | Material and labour for bricks sub class ‘B’ brick old size for cable protection laid in flat in trenches over the cable perpendicular to the direction of cable complete all as specified |