|
| 1 | Name of Work: ConstructionofProposedBuildingof\"Tribal Multiple arketing Centre\"ProjectforJ-196, Masinagudi Hills Tribes LAMP Co-operative Marketing Society Ltd., situated at Mysore Road, Masinagudi Bazaar, Gudalur Taluk, The Nilgiris |
| 2 | Earth work excavation for foundation in Hardstiffclay,stiffblackcotton,hardred earth,shalesmurram,gravel,stoneyearth and earth mixed with small size boulders55.208 and Sand, silt or other loose soil, wet sand, or silt not under water, light blackcottonsoll,sandyloamordinarysoil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling thesiteetc., |
| 3 | Plain Cement Concrete 1:5:10 (one part of tement,fivepartofCrushedStoneSand(M Sand) and Ten part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and Including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 4 | Plain Cement Concrete 1:4:8 (one part of tement,fourpartofCrushedStoneSand(M Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and Including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 5 | Supply and Fabrication of RTS Rods in Various Dia. Including Cutting, Bending and Tying with all Labour Charges Etc., Complete. |
| 6 | Supplying and erecting SHUTTERING including necessary supports for plane surfaces in foundation and in all floors for RCC COLUMN etc., using mild steel sheets of suitable size and BG 10 stiffened with welded mild steel etc., |
| 7 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc. using mild steel sheets of size 1200cm x 60cm and 10 BG stiffened with welded mild steel angles of size 40mm x 40mm x 5 mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner, Top Horizontal stiffener spaced at about 60cm to 90cm centre to centre or at suitable intervals. MS Channel Section (ISMC 100) shall be provided as a vertical support @1.20m C/C and with Lateral support of Steel Adjustable Telescopic Props of Size 2m x 2m (expandable upto 3.60m) & steel pipes of 20mm dia @ required level/spacing etc. complete complying with standard specifcation and as directed by the departmental officers. (Payment for centering shall be given after the concrete is laid) |
| 8 | Supplying and erecting SHUTTERING including necessary supports for plane surfaces in foundation and in all floors for PLINTH BEAMS, STAIRCASE STEPS etc., using mild steel sheets of suitable size and BG 10 stiffened with welded mild steel etc., |
| 9 | Supplying and erecting CENTERING AND SHUTTERING with necessary supports for plane surfaces such as RCC SLABS,LINTEL SUNSHADES, etc., with all cross bracings using mild steel sheets etc., complete. |
| 10 | REINFORCED CEMENT CONCRETE 1:1 1/2::3 (One Cement, One and half sand and three aggregate) using 20 mm gauge hard broken granite stone jelly for FOUNDATION and BASEMENT including laying consolidating finishing curing etc complete complying with standard speification. |
| 11 | Fly Ash BRICKWORK in cement mortar 1:5 (One cement and five sand) using second class table moulded chamber burnt bricks of size 23 x 11 cm x 7 cm for the following including curing etc., complete complying with standard specifications |
| 12 | Refilling with excavated earth other than Crushed stone sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification |
| 13 | Supplying and FILLING GRAVEL Supplying and filling in \"foundation and basement with filling Crushed stone sandin layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification. |
| 14 | Supply and fixing of M.S.Angle and Grills including one coat of red oxide paint etc. Complete |
| 15 | Supplying and fixing in position of Indian make white water closet of size in 580mm*440mm weight glassed earthan ware of approved with P Trap(or) S Trap foot rest and filling all round the closet using 20mm broken brick jally in 10cm thick and plaster in c.m.1:3 12mm thick including fixing in position levelling complete with necesary connection as per standard specification. |
| 16 | Supplying and fixing in position best white glazed earthern ware Oriya type URINALS of approved quality of size and embedding the closet with trap to shape in position with 40mm brick jelly lime concrete 1:2:5ETC. |
| 17 | Supplying and fixing in position of European Water Closet (white ) with \"P\" or \"S\" Trap with Double Flapped seat and seat cover with Brass Highes and 10 litre capacity PVC low level flusing tank with all internal fittings |
| 18 | FLOORING with scratch proof CERAMIC TILES of approved quality and colour of size 305mm x 305mm x 6mm in all floors over 20mm thick cement mortar 1:3 (One cement and three sand) base above the existing bed concrete and pointed with same color cement added. |
| 19 | WEATHERING COURSE CONCRETE using best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime(no sand to be added) over the RCC roof slabs in the proporation of brick jelly to lime being 32:12:5 by volume and laid in a single layer. |
| 20 | Daddoing the walls from the floor level colour glazed tile of size 30cm x 20cm x 6mm of approved quality in CM 1:2 12mm thick and pointing with the same colour cement suitable for the tiles etc., complete |
| 21 | SPECIAL CEILING PLASTERING and finishing all the RCC exposed surfaces such as RCC slabs, sunshades,canopies,staircase steps,landing slabs etc., with cement mortar 1:3 (one cement and three sand) 10mm thick including hacking the surfaces and providing |
| 22 | PLASTERING with cement mortar 1:5 (One cement and Five Sand) 12mm thick in all floors complying with standard specifications. |
| 23 | Supply of 1000 Liter HDPE tank including all charges etc |
| 24 | Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed copper cable of 1100 V grade with suitable rigid pipe on walls & ceiling for concealed light / fan point SD 01 |
| 25 | Wiring with 2 x 1.5 sq. mm insulated SC unsheathed cu. Conductor of 1100 V grade with suitable PVC rigid pipe on walls & ceiling for concealed plug point SD 10 |
| 26 | Supply and run of 2 of 4 sq.m (56/0.3)PVC insulated SC unsheathed CU.Conductor of 1100V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour. SD 44 |
| 27 | Supply and fixing TNEB Metre Board suitable for 3 Phases 100A service connection made up of suitable angle frame work of size 2 feet x 1.50 feet using angle iron of size 1.50x1.50x1.25 feet fixed on wall covered with hylem sheet of size 2 feet x 1.25 feet of 12mm thickness with nessary bolts and nuts supports and supply and fixing of 3 Nos 100A fues units (500 V) 1No Netural Copper earth flat of size 1\"x1/4\" with inter connection of EB metre to fuse units by 7/16 PVC copper wire with earth connection completed(SD 129) |
| 28 | Supply and run of 2 of 6 Sq.mm (84/0.3) PVC insulated SC Unsheathed CU.Condutor of 1100V on 7/20 GI bearer Wire for service connection Mains. SD 66 |
| 29 | Supply and fixing of WT bulk head fitting with guard (Phillips/Bajaj/Crompton/K.Lite) Suitable for incandescent lamp with 100W Bulb(SD 85) |
| 30 | Painting with plastic emulsion paint in two coats over a base coat of Primer in approved colour and quality etc., complete. |
| 31 | Painting with enamel paint two coats over a base coat of approved colour etc complete - For Iron works |
| 32 | Supplying and fixing of 1200mm(48\")sweep AC ceiling fan complete with stepped electronic 300W Regulator with 1 metre down rod with fan clamp with side plates and crpss arm of size 450mm(18\") SD106 |
| 33 | Supply and fixing of 300mm(12\") sweep(lightduty)AC exhaust fan complete with necessary wall opening and making good of the wall SD 114 |
| 34 | Conveying of surplus earth from the site from 0 to15 kilometers including transport loading and unloading etc. complete. |
| 35 | .Supplying and fixing of position of Indian make white glazed earthwere wash basin 550mm x 400mm wit hallaccessories suchas cost Iron brackets, 32mmdiaC.P.Wastecoupling, Rubber plug andchain, 32 mm dia \"B\" class, G.I.Waste pipe, 15mmdia, G.M.Wheel valve, 15mm dia Nylon connection, 15mm dia BrassNipples,15mm C.P. pillar tap etc., complete without any leakage complying with standard specifications |
| 36 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete |
| 37 | Supply and fixing of single box type 4\"40W fluorescent fitting completed with copper choke and condensor,with condult pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with Tube. SD 89 |
| 38 | Supply of PVC pipes and specials - 63mm dia PVC pipe of 6 kg/cm2 |
| 39 | 63 mm dia PVC Elbow |
| 40 | 63 mm dia PVC Tee |
| 41 | 63 mm dia PVC Coupling |
| 42 | 63x20 mm dia PVC saddle |
| 43 | 63 mm dia PVC Endcap |
| 44 | 63 mm dia PVC MTA |
| 45 | 20mm Brass chromium plated screw down Tap |
| 46 | Supply and fixing of Pre-fabricated Structural Steel, coated Galvalume ROOFING SHEET of 0.5mm thickness with SMP coating with colour bond XRW coating, having minimum of 550 Mpa yield strength, Coating 150 GSM as per ASTM 792 or equivalent standard. The structural roofing Panel shall have 1020 mm effective width, nominal 30 mm crest height at nominal 250 mm centre to centre pitch with the embossment (share grove) on top &side of ribs for better composite action including Flashing for joints, and all incidental charges. |
| 47 | Supplying and Erecting Pull and Push Type Rolling Shutterwith ISI make of approved size and section using 18 GIsheet. The shutter shall be painted with one coat of redoxide primer and the rate is inclusive of hood covers,transportation charges etc ROLLING SHUTTERS (WITH ISI MONOGRAM)Gear Operated Type (from 8 sqm. to 12 sqm. Area) |
| 48 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \"BB\" for all works in this package} Please Enable Macros to View BoQ information |
