|
| 1 | Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard /dense soil complete all as specified and directed. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting outin hard/dense soil complete all as specified and directed. |
| 3 | Excavation over areas n exc 1.5 m deep and getting out in hard/dense soil complete all as specified and directed. |
| 4 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubblemixed with earth around, in layers not exceeding 25 cm, in hard/dense soil complete all as specified and directed. |
| 5 | Excavating in post holes (or similar holes) each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in any type of soil complete all as specified and directed. |
| 6 | M&L PCC 1:4:8 type D2(using 40mm graded aggregate)as in foundation filling and mass concrete etc complete all as specified and directed. |
| 7 | M&L for PCC 1:3:6 type C-1(20 mm graded aggregate) precast cement concrete block masonry with solid blocks exc 10 cm in width and setting in CM 1:6 etc complete all as specified and directed. |
| 8 | M&L for Pre-cast cement concrete block masonry Type B1,1:2:4(20mm graded aggregate) set in CM 1:4 with solid blocks, exc. 10 cm in width and setting in mortar, complete all as specified and directed. |
| 9 | M&L Rendering 15mm thick on fair faces of brick work or concrete surface in cement plaster 1:4, finished even and smooth without using extra cement complete as specified and directed . |
| 10 | M&L for newly plastered surfaces of walls and applying two coats of cement based paint,over a coat of primer complete all as specified and directed. |
| 11 | Returning/filling in including spreading, levelling, watering and well ramming in layers n exc 25cm complete all as specified and directed. |
| 12 | Removing excavated material n.exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed. |
| 13 | M&L Hard core of gauge n.exc 63mm, deposited, spread and levelled in layers nexc 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 14 | M&L for 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as cdement concrete in Sub-base floors, sub-bases floors and pavings etc complete all as specified. |
| 15 | M&L for 75 mm thick plain cement concrete type C-2, 1:3:6, (40mm graded stone aggregate)as in plinth protection, finishing the top surfaces even and smooth W/O using extra cement complete as specified and directed. |
| 16 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggragate as in subbase 25 mm thick complete all specified and directed by engr in charge. |
| 17 | M&L for 15 mm thick screed bed in CM 1:4 for laying floor tiles complete all as specified and directed. |
| 18 | M & L for Non-skid ceramic tiles 7 to 8 mm thick coloured tiles( square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match. |
| 19 | M & L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finshed rough to receive tiles. |
| 20 | M & L for 350 x 250 x 7 mm/450 x 350 x 7 mm thick glazed coloured ceramic tiles on vertical surface of wallset and jointed in neat cement slurry and pointed in white/coloured cement to match the shade complete all as specified and directed. |
| 21 | S&F Rolled mild steel Fe-410W(GdeE-250) quality B Rooftrusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. as specified and directed. |
| 22 | S&F Pre-Painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour havimg testile strenght of 550 Mpa as in roof covering/ cladding to wall , fixed with self tapping screws as specified and directed. |
| 23 | S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying and fixing in opening as per specification and drawing. |
| 24 | S&F solid pvc door frame of size 50mmx47mm made out of 5mm with wood grain printed plain colour pvc sheet used insteadPlain colour PVC sheet & edges will be painted to match with printed sheet, reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete. |
| 25 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frameshall be covered with heat moulded plain colour PVC \"C\" channelhaving a PVC sheet strip of 20mm width stuckinside with solventcementfor stiles and plain colour PVC sheets for top rail, lock & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frameat siteas per specification & drawing. |
| 26 | S&F 100mm size stainless steel butt hinges, medium weight, cold rolled complete with stainless steel screw etc. all as specified as directed. |
| 27 | S&F Aluminium anodised barrel tower bolts 150mm long of extruded section and fixed |
| 28 | S&F 150mm size extruded aluminium alloy handles, fabricated type anodised |
| 29 | S&F PVC (SWR) pipes single socketed 110mm dia in any length with rubber ring joints fixed to walls |
| 30 | S&F PVC (SWR) junction single, (single T) equal or unequal with access door110mm dia. |
| 31 | S&F PVC (SWR) bends any radius, bend 110mm dia. |
| 32 | S&F PVC (SWR) vent cowl 110mm dia |
| 33 | S&F PVC (SWR) WC connector 110mm dia lip ring. |
| 34 | S&F75 mm diaPVC (SWR) floor trap, plain with grating including jointing with solvent cement. |
| 35 | S&F PVC (SWR) pipes 75mm dia single sockted in any length with rubber ring joints fixed to walls. |
| 36 | S&F PVC (SWR) bends any radius with access door, 75mm dia. |
| 37 | S&F of 15mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches. |
| 38 | S&F of20mm bore steel water tubes, medium grade, galvanised with all fittings and fixed complete to walls/ceilings or laid in trenches. |
| 39 | S&F 15mm bore angle stop valves, fancy type chromium plated, screwed down, high pressure,screwed both ends for iron pipe or for unions & fixed. |
| 40 | S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cmlong between fllanges. |
| 41 | S&F 600mm x450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board fixed t wooden plugs with chromium plated brass screws and cup washers all as specified and directed |
| 42 | S&F vitreous china wash hand basin white flat back of size 550mmx400 mm includingcutting forand pinning in ends of brackets or errecting stand but exclusive of fixing ofwaste pipeand CI brackets complete all as specified and directed. |
| 43 | S&F vitreous china bowl urinal flat back, size of 465x355x265 mm white (minimum), (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs, fixing of flush pipe, waste pipe, grating and connection to water supply pipe complete all as directed. |
| 44 | S&F32 mm bore Low density poly ethylenepipes of pressure rating 6kgf/cm2fixed complete to walls,ceiling or in floors etc. |
| 45 | S&F 15 mm bore chromium plated fancy type pillar tap cast copper alloy with capstan heads, screwed down high pressure,with or without leterred\"Hot ot Cold\" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 46 | S & F Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. conforming to e 410-W (GdeE- 250) quality A complete all as specified and directed. |
| 47 | S&F Rotational mounded polythene water storage tank of 500 ltrs capacity,(multilayered, cylindrical, vertical with closed top) hoisted and fixed in position as specified in SSR Pt-I complete all as specified and directed. |
| 48 | S&F ball brass valves high pressure with polythene float and fly nut complete screwed for iron pipes of 20 mm dia or brass ferrule and fixed, all as directed. |
| 49 | S&F Gun metal globe or gate valve with Iron wheel head, screwed both ends for 20 mm dia of pipe and fixed. |
| 50 | M & L PCC 1:3:6 type C2, (using 40 mm graded stone aggregate) as in surface channels, drains etc all as specified and directed. |
| 51 | M&L for providing PCC (1:3:6) type C1 using (20mm graded crush stone aggregate) as in copings including necessary formwork complete all as specified and directed by Engr-in-Charge. |
| 52 | M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tracement, including forms, moulds, mi- tred/stopped ends etc. complete all as specified and directed by Engr-in-Charge. |
| 53 | M&L forPCC 1:2:4 type B-2 using 40 mm graded stone aggregatein in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts(including caps and bases) |
| 54 | S & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete as as specified and directed. |
| 55 | M&L for preparation of newly steel surface of any description, over 10cm in width or girth,not otherwise described with two coat of synthetic enamel paint over a coat of red oxide primer complete as as specified and directed. |
| 56 | M&L for Laying and compacting 150mm thick Soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber as specified. |
| 57 | M & L 150 mm thick Cement concrete type D2,1:4:8 (40mm graded aggregate) as in sub base, including form work complete as as specified and directed. |
| 58 | M&L for 40mm thick PCC type B- 1, 1:2:4 (20mm graded aggregate) in sub-floors, sub-bases, floors and pavings etc finishing surface even & smooth w/o using extra cement complete as as specified and directed. |
| 59 | Disconnecting existing tanks (capacity 250-500ltrs), setting aside (or lowering if required) for repairs, cleaning, etc. And hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. Measured separately) |
| 60 | Dismantling of water tanksexc 500 ltrs but n exc 1000 ltrs capacity and removing to stores. |
| 61 | S & F poythene water storage tank of 1000 ltrs capacity rotational moulded (multilayered, cylindrical vertical with closed top) hoisted and fixed in position all as specified |
| 62 | Demoloition of Cement concrete (unreinforced) of any description and in any situation not otherwise specifically provided for inl. taking down of existing tarfelt and bituminous compounds in roof of any description from roof or terracing, roughening surfaces of old concrete surface as per specified and directed |
| 63 | M&L cutting out cracks to V section in existing roof or terracing cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand @ 1:1 (by weight) complete as as specified and directed. |
| 64 | M & L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in paddingconcrete to maintain slope complete all as specified. |
| 65 | M&L 15 mm thick cement plaster in CM (1:4) mixed with water proofing compound as per manufacturer instructions over while the padding concrete is still green complete all as specified and as directed.Note : WPC shall be measured & paid separately under relevent items complete as as specified and directed. |
| 66 | M & L for Priming surfaces and applying one coat of Cold bituminous primer @ 0.3 Lit/Sqm conforming to IS : 3384-1986, Note:-(Water proofing treatment on \"non accessible\" surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment with old pcc padding and plastering,properly cleaning & drying the concrete surfaces including removing debbries out of MOD land complete, the Rates incl in item No. 62, 64 & 65) |
| 67 | M&L ApplyingAPP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on primed surface by torch application including two coat heat resistant of aluminium paint on top complete all as specified. |
| 68 | Supply only integrated water proofing compound |
| 69 | Demolition of cement concrete infloors n.exc 15 cm thick in ground floor (below or above ground level) and in any position all as specified |
| 70 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed of CM 1:4 complete all as specified and directed |
| 71 | Demolition of Stone slabs and tiles of any description or thickness in floors laid bedded and pointed in any mortar, aprons etc. |
| 72 | M&L for machine cut kota stone slab (Single Piece in tread) as in flooring 20 to25 mm thick in floor includingscreed bed 15mm thick or bedding layer for laying floor finishes CM 1:4 etc set and jointed in neat cement slurry and jointed with greay cement slurry mixed pigment to match shade of slab incl rubbing and polishing complete all as specified . |
| 73 | M& L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types over and including screed bed 15mm thick in CM 1:4 complete all as specifird and directed. |
| 74 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tilesand rubbish off the premises. |
| 75 | Material and labour for 350x 250x7mm or 450x350x7mm thick glazed ceramic tiles coloured set and jointed in neat cement slurry and pointed in coloured cement over 10mm thick rendering with CM 1:6 on fair faces of brick work or concrete surfaces as in dado of bathroom, toilet and kitchen all as specified. |
| 76 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering with CM 1:6 on fair faces of brick work or concrete surfaces as in skirting all as specified. |
| 77 | S & F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) pipe, etc complete as as specified and directed. |
| 78 | Supply & Fix in repair vitreous china wash down water closet pan of pedestal pattern, white with \"P\" or \"S\" traps,including connecting to trap and to flushing pipe etc complete as as specified and directed. |
| 79 | S&F in repair of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 80 | S & F in repairs 10 litres PVC, valve less, Syphonic action type, Flushing cistern low level,with flush pipe of polythylene of low or high density or PVC 32mm dia for low level cistern white with inlet ball valve float chain and pull and brackets complete as as specified and directed. |
| 81 | Dismantling of rain water pipe and sewage line pipe of any type and any size including fitting complete all as specified and as directed. |
| 82 | S&F PVC (SWR) bends any radius, with access door 110mm dia. |
| 83 | S&F in repairs15mm bore bib tap, chromium plated brass , fancy type with capstan head screwed down, screwed for iron pipe all as specified and directed. |
| 84 | S&F in repair 15mm Brass CP wall mixer for mixing hot & cold water screwed down for PPRC/steel pipe or union of 15mm dia complete all as specified and directed |
| 85 | S&F 15 mm bore dia brassCP mixer for mixinghot & cold water screwed down for iron pipe and fixed in repair for kitchen sink andcomplete all as specified and directed |
| 86 | S&F central hole basin mixture brass CP (15mm) for hot and cold water screwed down for iron pipe complete all as specified and directed |
| 87 | S&F in Repairs 15mm dia angle valve/stop valve chromium plated cast copper alloy fancy type screwed down high pressure with capstan head screwed both endsfor iron pipe or for union complete all as specified and directed |
| 88 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed |
| 89 | S&F in Repairs Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats.(Minimum weight 190gms) |
| 90 | S&F in repair chromium plated curtain rod of medium weight and fixed brackets and decorative end supports etc complete all as specified and directed. |
| 91 | S & F PVC connecting pipe 600 mm long |
| 92 | Taking up or down 15 mm bore steel tubing and connections. |
| 93 | Taking up or down 20 mm bore steel tubing and connections. |
| 94 | Taking down Chowkats or frames not exceeding 1.5 Sqm each (without taking off shutters from the frame). |
| 95 | Taking down Chowkats or framesexceeding 1.5 Sqm each but not exdeeding 4 Sqm each(without taking off shutters from the frame). |
| 96 | Supply and fix 100mm long MS butt hinge medium weight cold rolled in panelled doors and flush doors |
| 97 | Supply and fix 75mm long MS butt hinge medium weight cold rolled in PVC Doors |
| 98 | Supply and fix aluminium anodized barrel tower bolt 125mm long extruded section. |
| 99 | Supply and fix 125mm size aluminium anodized handle fabricated type |
| 100 | Supply and fix300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed |
| 101 | Supply and fix 2nd class hard wood plain solid straight chowkats and frame wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 102 | Supply and fix 30mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securingglass etc complete all as specified and directed |
| 103 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed |
| 104 | S & F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed |
| 105 | S&F 3 mm thick frosted glass, ordinary quality and glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified and directed |
| 106 | S&F Mild steel flat iron as in hold fasts, clamps,wall ties,bands,straps supports or stay for rain water etc. |
| 107 | M&L for preparation of new wooden surface of wood and wood based material of any description not otherwise describred over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed . |
| 108 | M&L for Preparing old plastered surfaces of ceiling andapplying one coat of whitewash complete all as specified and directed |
| 109 | M&L distemper oil emusion two coats over 1.5 mm thick wall care putty including preparation of old wall surfaces complete removal of existing all as specifed and as directed. |
| 110 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm on walls and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surface of wall after complete removal of existing treatment |
| 111 | S & F in repair Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe pf 20mm dia or brass ferrule and fixed all as specified and directed. |
| 112 | M&Lfor prelaminated particle board 18/19mm thick, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work as in shutters for cup board & kitchen shelves. |
| 113 | Sypply & Fixed 20mm thick 2nd class hard wood clean swan with butt joints in shelves; Partitions and shelves of built-in cupboards, almirahs, book cases, toilet boxes, racks, pelmets and similar work. |
| 114 | S&F 75mm Hasp and staple, aluminium anodised with mild steel hinge pin including blt to hinge plate and fixed with screw. |
| 115 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished |
| 116 | Taking down cement plaster on brick, concrete block wall or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. |
| 117 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfacesin CM 1:4 with WPC 3% by weight of cement finished even and smooth without using extra cement completed all as specified and directedNote:- WPC Will be measured and paid separately |
| 118 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm on walls and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces |
| 119 | M&L rendering 10 mm thick onfair faces of brick work/ surfaces in cement mortar (1:6) finished even and fair complete all as specified and directed. |
| 120 | M&L application of distemper oil emusion two coats over 1.5 mm thick wall care putty including preparation of new surfaces. |
| 121 | M&L, rendering 5 mm thick in cement mortar 1: 3 on ceiling / soffits of chajjas etc finishedeven and smooth without using extra cement complete all as specified and directed. |
| 122 | M&L for Preparation of old decoratedplastered or unplastered surface of ceiling And applying two coat of white wash complete all as specified and directed |
| 123 | Demolition of brick masonary , built in cement mortar including all quoins, aarches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed. |
| 124 | S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarfwall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm. |
| 125 | Supply and Fixin repairs plate rack made of stainless steel 0.50mm thick,over all size 762mm(H)x787mm(W)x254mm(D) complete all as specified and directed. |
| 126 | S& F Unplasticised PVC 32 mm bore pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe |
| 127 | S&F in repair vitreous china wash hand basin white flat back of size 550mmx400 mm including CI brackets and waste pipe complete all as specified and directed |
| 128 | S&F in Repairs Brass chromium plated shower rose 125mm size incl fixing to steel pipe or union all as specified and directed. |
| 129 | S & F in repair looking mirror 600 mm x 450 mm bevelled edge mirror or selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complate all specified and directed |
| 130 | M&L Rendering 15mm thick on fair faces of brick work or concrete surface in cement plaster 1:4, finished even and smooth with neeru finish completed all as specified and directed. |
| 131 | M&L for MS TMT bars10mm dia and over, cut to length, bend to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips. |
| 132 | M&L for providing pre-cast RCC (1:2:4) type B1 using (20mm graded crush stone aggregate) as in cover slabs of manholes and similar location including necessary formwork and set in CM 1:4 complete all as specified and directed by Engr-in-Charge. |
| 133 | Material & Labour for Point/fan wiring with 1.5 sq mm (nominal area), PVC insulated unsheathed (FRLSH/HRFR), 1100 volts grade, multi-stranded copper conductor, in and including PVC casing capping of adequate size with all fittings and accessories including PVC boxes for housing the switches ( Make of box Prestoplast,Prestoteak), including PVC insulated and unsheathed (FRLSH/HRFR)single core multi-stranded copper conductor cable of size 1.5 sq mm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed. |
| 134 | All as per item No. 133 here in before but One bell/ buzzer point controlled by one push button on the same board with other switches or independentcomplete all as specifieddirected. |
| 135 | All as per item No. 133 here in before One 3 pin socket outlet, 5/6 Amps on the same board with other switches, with cables 1.5 sq. mm size |
| 136 | All as per item No. 133 here in before but for one 3 pin socket outlet 5/6 Amps three pin controlled by one switch on independent board complete all as specifieddirected. |
| 137 | All as per item No. 133 here in before but for one 5 pin socket outlet 15/16 Amp and 5/6 Amp Multipurpose independent using 2.5 Sqmm copper conductor cable (multi-strand) PVC insulated and unsheathed cable and 2.5 sqmm copper (multistrand) PVC insulated and unsheathed earth wire with terminal box of size 175mm x 100mm x 3.15mm complete all as specified. |
| 138 | S&FSocket outlet 2 in 1, 3 pin, 5amp flush type |
| 139 | S&FSocket outlet 2 in 1, 3 pin, 5 and 15 amp flush type |
| 140 | Supply & fixing switch piano flush type (ISI marked), single pole, one way 5 Amp, 240 Volts complete all as specified & directed. |
| 141 | Supply & fixing switch piano flush type (ISI marked), single pole, one way 15 Amp, 240 Volts complete all as specified & directed. |
| 142 | Supply and fixing ceiling rose, surface bakelite, 65mm x 50mm ,two to three terminals complete all as specified & directed. |
| 143 | Supply and fixing lamp holder, insuleted body with pack plate suitable batten fitting on wall duly grouted/fixed in solid block wall or on wooden boardcompleteall as specified and directed. |
| 144 | Supply and fixing LED light fitting 1 x 20 Watt 220 volt AC decorative box type with driver, holder including LED tub light connecting up with three core flexible copper conductor cable of size from ceiling rose complete all as directed. |
| 145 | S&F LED bulkhead fitting 10 watt (Endura Ruby) with all accessories and including connenting up with twin core twisted with flexible copper conductor cable with suitable size of 230 volts , 50 hz complete all as spicified and directed. |
| 146 | Supply & fixing Bell push, flush type,5 amp 240 Volts complete all as specified & directed. |
| 147 | Supply and fixing call bell Buzzer, Ding Dong AC. 230 volts, single pole completeall as specified and directed. |
| 148 | S&F LED lamp 10 Watt, CDL, B-22 cap, (Pin type), 230W, PF not less tha0.85 (min). |
| 149 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 150 | Supply and fix sheet metal enclosures for DBs when MCBs to be used 230 volts 04 way 200 Amp rated busbarsingle pole and neutral fixed on wall duly grouted in solid block wall or on wooden board. |
| 151 | S&F MCB SPN having braking capacity 10KA, 32 Amps, 240 Vcomplete all as specified and directed. |
| 152 | S&F MCB SP having braking capacity 10KA, 6 to 32 Amps, 240 Vcomplete all as specified and directed. |
| 153 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm |
| 154 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5mtr below the normal ground level connected to galvanised wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron.Earth wire protected by GI pipe 15 mm bore(medium grade) and connected to main switch board or main control board as directed and as specified and shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 40 cm x 40cm x 5cm reinforced with 8mm dia TMT bars @ 15cm C/C with one handle for liftingmade out of 8mm dia bar, funnel, wire mesh, 20mm dia GI pipe medium grade for watering, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil and testing complete all as directed by Engineer-in-Charge. |
| 155 | Supply, laying & testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 Core including protection GI/PVC pipe as required complete all as specified. |
| 156 | S&F of new generation energy saving and environmental friendly long life LED building securitylight made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 35 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete including twisted 3 core copper cable of size 1.5 Sqmm dia for connecting phase, neutral and earth from ceiling rose to light length as required at site,GI bracket 32 mm dia pipe and 02 numbersclmaps, all fixing arrangements such as fastners, bilts, nuts washers etc all as specified and directed. |
| 157 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers |
| 158 | S&F wire for circuit/sub main wiring with 1100 volts grade double core PVC insulated and unsheathed cable with multistranded copper conductor 6 Sqmm, on surface or recessed or drawn in PVC casing capping/PVC Pipealong with 6 Sqmm single core copper conductor multi stranded cable as earth continuity conductor complete all as specified and as directed.(Note: One RM PVC casing capping/PVC conduit ,one run of 6 sqmm earth wire and 2 Run of 6 sqmm cable shall be measured as one run.) |
| 159 | S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20A complete all as specified and directed |
| 160 | Supply and fix electric water heater(Geyser), storage type steel body with copper inner tank and heating element up to 2 KW capacity 25 litre, BEE 5 star rated adjustable temprature setting 0-90 degree C complete with accessories such as safety wall, thermostate, NRV indication lamps, inletoutlet connections,air vent connections, connection pieces including all fixing arrangements such as fastners, bilts, nuts washers etcincluding making good disturbed wall surfaces matching with the existing surface and finishing complete all as specified and directed by Engr in charge |
| 161 | S&F Stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe of size 15 mm. |
| 162 | S&F Bib tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified & as directed by engr-in-charge. |
| 163 | M & L for PVC connections 15mm size with PTMT nuts of length 450mm for hot and cold water connection complete |
| 164 | S & Fincl leakage testing galvanised steel water tubing medium grade 15 mm dia bore with all fittings such as bends, elbow, socket, reducer etc, laid under floor / trenches all as specified & directed. |
| 165 | S&F distribution board vertical type TPN 415 Volt for fixing 4 pole MCCB, double door IP 43 protection, 4 way with copper bus bars, neutral links , earth link, earthing studs, blanking plates, interconnection between incomer MCCB and bus bar duly prewired fixed flush to wall / other surface complete all as specified and as directed. |
| 166 | S & F MCCB,04 Pole, capacity 125 Amps with ultimate breaking capacity 16 KA at 415 volts with fixed thermalsettings conforming to IEC 60947 Part-I/IS-13947 Part-I , (Ics=Icu=100%)in the existing panel with suitable connecting copper terminals at site complete all specified and directed. |
| 167 | Supply and fix sheet metal enclosures for DBs when MCBs to be used 230 volts 8 way 200 Amp rated busbarsingle pole and neutral fixed on wall duly grouted in solid block wall or on wooden board. |
| 168 | Taking down point wiring carefully copper/ aluminum (light,fan, socket or power) complete (fittings such as switches ceiling rose, pendents, regulators, sockets etc) |
| 169 | Taking down main switches, DBs alongwith existing board and removing the same from the site and making good the disturb surfaces / Portion of the wall etc all specified and directed by EIC. |
| 170 | M & L for laying of fine, clean sand (river sand) free from sharp materials and stone particalsin trenches for cushioning of cable 8 cm thick under cable and 15 cm thick over the cable including gently punning complete all as specified and directed. Note:- The total thickness of sand shallbe measured 18 cm after punning. |
| 171 | Supplying and laying un-reinforced precast concerete cable cover, class LV, type 1 flat size 250mm x150mm x 40mm for cable protection , laid flatie length of cable cover shall be laid across the cable, complete casted with PCC 1:2:4 Type B1 using 20mm graded crushed stone aggregateall as specified and directed |
| 172 | M & L for road cutting incl necessary excavation 45 cm wide and90 cm in depth as in trenches in any type of soils/rock for laying LT UG cable throughpipeafter laying /through the cable trenches will be fillingtop withM&L PCC 1:3:6 type C-1 using 20 mm grdaeds stone aggregates from top over 15 cm thick hard good of broken boulders , 63 mm gauge over 15 cm bolders 100 mm dia over filled and rammed earth to make good the disburbedsurface etc complete all as specified and directed. |
| 173 | Supply and laying galvanised tube light gradeISI marked of size 50 mm dia incl all fittingsin trenches/fixed on pole/wall/floor or laid in position complete all as specified and directed. |
| 174 | Supply, laying & testing in repalcement cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminum conductor, 1100V grade with stranded aluminium conductor of size 25 sqmm 4 core complete all as specified and directed. |
