|
| 1 | Demolition cement concrete (unreinforced) in ground floor and pavings not exceeding 15cm thickness below or above ground level with and including removing rubbish material from building and thrown in low lying empty area compete all as specified and as directed by Engineer-in-charge. |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) with and including removing rubbish material from building and thrown in low lying empty area compete all as specified and as directed by Engineer-in-charge. |
| 3 | Material & Labourfor 25 mm thick PCC in Cement Mortar1:2:4 Type B-0 , using 12.5 mm graded stone aggregatesas in sub base of floorcomplete all as specified and directed by Engineer-in-Charge. |
| 4 | Material & Labour for GlazedCeramic tiles dark shade ( shade as approved by Engineer-in-charge ) ,10mm thick, in Square / Rectangular ,polished, area of each tileexceeding 0.36 Sqm but not exceeding 0.42 Sqm,laid as in floors set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured cement to match theshade of tiles , laidover with and including15mm thickscreed bed in cement mortar 1:4complete all as specified and directed by Engineer-in-Charge. |
| 5 | Material & Labour for Glazed Coloured Ceramic tilesdark shade ( shade as approved by Engineer-in-charge ) , 10mm thick , granite /Marble/ Wood trexture , area of each tilenot exceeding 0.36 Sqm ,as in vertical surfaces, set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured cement to match the colour / shade of tiles , laidover with and including10mm thick renderingin cement mortar 1:4complete all as specified and directed by Engineer-in-Charge. |
| 6 | Material & Labour for Non skid ceramic coloured joint free tiles , thickness 7mmto 8mm thick (square/ rectangular), colour as approved by Engineer-in-chargearea of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqmas in floor etc., set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured cement to match the colour / shade of tiles , laid over with and including15mm thick screed bed in cement mortar 1:4complete all as specified and directed by Engineer-in-Charge. |
| 7 | Material & Labour for Glazed Coloured Ceramic tiles ( colour as approved by Engineer-in-charge ) , size 300mm x 200mm x 7mm thick,as in vertical surfaces, set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured cement to match the colour of tiles , laidover with and including10mm thick renderingin cement mortar 1:4complete all as specified and directed by Engineer-in-Charge. |
| 8 | Material & Labour for Glazed ColouredCeramic tiles ( colour as approved by Engineer-in-charge ) , size 450mm x 350mm x 7mm thick,as in vertical surfaces, set and jointed in neat cement slurry @ 3.00Kg per Sqm and pointed in white or coloured cement to match the colour of tiles , laidover with and including10mm thick renderingin cement mortar 1:4complete all as specified and directed by Engineer-in-Charge. |
| 9 | Material & Labour for15mm to 20mm thick granite slab (any type)in one piece machine cut (as approved by Engineer-in-charge) for counter sunk wash basin, plateform /cooking plateform , steps, jambs,pillars, window cills, , shelves, urinal partitionand like bedded and jointed with grey cement slurry @ 3.00Kg per Sqm and pointed with white cement with admixture of pigment to match the shade of granite stone with andincluding grinding and polishing , laid over with and including 15mm thick Rendering/ screed bedin Cement Mortar1:4complete all as specified and directed by Engineer-in-Charge. |
| 10 | Material & Labour for Machine cut kota slab20mm - 25 mm thick ( Kota stone as approved by Engineer-in-charge) as in flooring , laid and jointed with grey cement slurry @ 3.00 Kg per Sqm mixed with pigment to match the shade of the slab including rubbing and polishing, laid over with and including 15 mm thick screed bed in Cement Mortar 1:4complete all as specified and directed by Engineer-in-Charge. |
| 11 | Material & Labour for Machine cut kota slab20mm - 25 mm thick in one piece ( Kota stone as approved by Engineer-in-charge) as in vertical surfaces such as skirting, dado , pillar, risers of steps , etc. laid and jointed with grey cement slurry @ 3.00 Kg per Sqm mixed with pigment to match the shade of the slab including rubbing and polishing, laid over with and including 10 mm thick renderingin Cement Mortar 1:4complete all as specified and directed by Engineer-in-Charge. |
| 12 | Rounding to edges of stone slab on edge such as steps cooking platform and other similar situationscomplete all as specified and directed by Engineer-in-Charge. |
| 13 | Material and labour for 75 mm thick PCC 1:3:6 Type C-2 using 40mm graded stone aggregate as in flooring, hard standing, plinth protection / path etc. finished even and smooth without using extra cementcomplete all as specified and as directed by Engineer-in-Charge |
| 14 | Taking down cement or cement lime plaster from brick wallor concrete surfaces etc including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge |
| 15 | Material and labour for Rendering 10mm thickinCement Mortar1:6 , on fair faces of brick work or concretesurfaces ,finish even & smooth withoutusing extra cementcomplete all as specified and directed by Engineer-in-Charge. |
| 16 | Material and labour for Rendering 15mm thickinCement Mortar1:4 , on fair faces of brick work or concretesurfaces ,finish even & smooth withoutusing extra cementcomplete all as specified and directed by Engineer-in-Charge. |
| 17 | Material and labour forpreparation of new plastered surface of walls with and includingapplying two coats of Oil EmulsionDistemperover with and includingone coat of appropriate primerover with and including 3.00mm thick wall care putty(as approved by Engineer-in-chargefor smooth & even surface) complete all as specified and directed by Engineer-in-Charge. |
| 18 | Material and labour forpreparation of old surface of walls (with using by broomingdown or steel wire burshing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots ) ,with and including 3.00mm thick wall care puty(as approved by Engineer-in-chargefor smooth & even surface)with and includingapplying two coats of Oil EmulsionDistemper complete all as specified and directed by Engineer-in-Charge. |
| 19 | Material and labour forpreparation of new surface of walls, with and includingtwo coats of cement base paint ,over with and including one coat or alkalic resistance primer complete all as specified and directed by Engineer-in-Charge. |
| 20 | Material and labour forpreparation of oldsurface of walls, with and includingtwo coats of cement base paintcomplete all as specified and directed by Engineer-in-Charge. |
| 21 | Taking down chowkhats or frames with shutters of PVC door , wooden door shutter, wooden window shutter , Mild steel window and Mild steelventilators(without taking off shutters from the frames)areanot exceeding 1.50 sqm eachcomplete all as specified and asdirected by Engineer-in- charge. |
| 22 | Taking down chowkhats or frames with shuttersof PVC door ,wooden door shutter, wooden window shutter , Mild steel window and Mild steelventilators(without taking off shutters from the frames) areaexceeding 1.50 sqm but not exceeding 4.00 Sqm each complete all as specified and asdirected by Engineer-in- charge. |
| 23 | Supply and fixing Mild steelPressed steel frames for doors with one or more rebates with and includinglock strike plate, fixing lugs, etc., size of frame 125mm x 60mm,with and including one shop coat of zinc chromate primercomplete all as specified and as directed by Engineer-in-charge. (thickness of steel sheet shall be 1.25mm) Note:- 1.The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account.2. The rate of one shop coat of zinc chromate primer is included in this item and nothing shall be paid extra on this account. |
| 24 | Supply & FixingSolid PVC door frame of size 50mm x 47mm made out of 5 mm single side prelam PVC sheet reinforced with MS square tube manufactured as per SSR Part-I specifications and drawingscomplete all as specified and directed by Engineer-in-Charge.Note:- 1.The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface. Nothing extra shall be paid on this account. |
| 25 | Supply & FixingFactory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm widthstuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & asgap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.complete all as specified and directed by Engineer-in-Charge. |
| 26 | Supply and FixingFactory made 35mm thickframed, panelled shutter (two panel) with lock railmade of 2nd class Hard wood and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engineer-in-Charge. Note: Butt Hinges, Tower bolts, Handles , sliding door boltsand painting shall be measured and paid seperately under appropriate items of schedule \"A\" BoQ. |
| 27 | Supply and Fixing 35mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), using 2nd class hard wood (as approved by Engineer-in-charge) edges of frming plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc , sizes of members of shutters as specified in SSR Part-I, Section8, Clause 8.24 (a), supplied and fitted to chowkhats complete all as specified and as directed by Engineer-in-Charge. Note:- (i)Wire gauze / glass shall be measured and paid separately under appropriate items of Schedule \"A\" BoQ.(ii) Butt Hinges, Tower bolts, Handles , sliding door bolts, ordinary rat tail pattern springs and painting shall be measured and paid seperately under appropriate items of schedule \"A\" BoQ.(iii) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge. (iv)Primer shall be measured paid separately under appropriate itemof BOQ. |
| 28 | Supply and Fixing Factory made box type steel windows / ventilatorswith side hung shutters with andincludinghinges , steel handle,steel peg stay, complete with glazing bars, dovetailed or weldedwith and including one shop coat of red oxide zinc chromateprimer and making good disturbed surfaces of walls,complete all as specified and directed by Engineer-in-Charge.NOTES: (1) The rate quoted by the contractor are deemed to be included for one shop coat of red oxide zinc chromeprimer on steel windows and nothing shall be extra paid in this account. (2)The quoted rate deemed to include the cost of making good the disturbed surface with cement plaster 1:6 and matching the colour of new plaster with existing surface.(3) Manufactring of steelwindows / ventilators shall be carried out as perdrawing No. TD/2013/01 sheet No. 1/3 to 3/3. (4) Glass panel / wire gauze shall be measured and paid separately under appropriate items of Schedule \"A\" of BoQ. |
| 29 | Supply and Fixing 200mm longh aluminium anodised barrel tower bolts ofextruded sectioncomplete all as specified and directed by Engineer-in-Charge. |
| 30 | Supply and Fixing aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts ofsections or cast-aluminium extruded alloy and fixedcomplete all as specified and directed by Engineer-in-Charge. |
| 31 | Supply and Fixingbutt hingessize of 100mm , medium weight cold rolled mild steel complete all as specified and directed by Engineer-in-Charge. |
| 32 | Supply and Fixingmild steel 300mm size ordinary rat tail pattern springs includingroller and roller plate complete all as specified and directed by Engineer-in-Charge. |
| 33 | Hacking out old or broken glass (any thicknesssize quility or description) from steel frames or stone concrete or brick surrounds glazed with putty or fixed with beadscomplete all as specified and directed by Engineer-in-Charge. |
| 34 | Supply and Fixing4mm thick sheet glass of ordinary quality and glazing with oil putty in square , not exceeding0.50 Sqm each in panecomplete all as specified and directed by Engineer-in-Charge. |
| 35 | Supply and FixingGalvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed withtinned tacks, or galvanised wire staples complete all as specified and directed by Engineer-in-Charge. |
| 36 | Taking up or down steel tubing 15mm bore and connectioncomplete all as specified and directed by Engineer-in-Charge.Note: ifExcavationrequired , Excavation and earth work shall be measured and paid seperately under appropriate items of schedule \"A\" BoQ. |
| 37 | Supply & Fixing15mm bore GI tubing medium grade with all newfittingslaid in trenchescomplete all as specified and directed by Engineer-in-Charge. Note: Excavation and earth work shall be measured and paid seperately under appropriate items of schedule \"A\" BoQ. |
| 38 | Supply & Fixing15mm bore GI tubing medium grade with all newfittings to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge. |
| 39 | Fixing only 15mm bore GI tubing medium gradeafter thoroughly cleaning of f pipe retrived from serial item no.34.00 here-in- before with all newfittingslaid in trenchescomplete all as specified and directed by Engineer-in-Charge. Notes: 1.Excavation and earth work shall be measured and paid seperately under appropriate items of schedule \"A\" BoQ.2. The rate of cleaning of old servicable pipe is included in this item and nothing shall be paid extra on this account. |
| 40 | Fixing only 15mm bore GI tubing medium gradeafter throughlycleaning of pipe retrived from serial item no.34.00 here-in- before with all newfittingsfixed to walls and ceilings or laid in floorscomplete all as specified and directed by Engineer-in-Charge. Note:The rate of cleaning of old servicable pipe is included in this item and nothing shall be paid extra on this account. |
| 41 | Taking up or down steel tubing 20mm bore and connectioncomplete all as specified and directed by Engineer-in-Charge.Note: ifExcavationrequired , Excavation and earth work shall be measured and paid seperately under appropriate items of schedule \"A\" BoQ. |
| 42 | Supply & Fixing20mm bore GI tubing medium grade with all newfittingslaid in trenchescomplete all as specified and directed by Engineer-in-Charge. Note: Excavation and earth work shall be measured and paid seperately under appropriate items of schedule \"A\" BoQ. |
| 43 | Supply & Fixing20mm bore GI tubing medium grade with all newfittings to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge. |
| 44 | Fixing only 20mm bore GI tubing medium gradeafter thorughly cleaning of pipe retrived from serial item no.39.00 here-in- before with all newfittingslaid in trenchescomplete all as specified and directed by Engineer-in-Charge. Notes: 1.Excavation and earth work shall be measured and paid seperately under appropriate items of schedule \"A\" BoQ.2. The rate of cleaning of old servicable pipe is included in this item and nothing shall be paid extra on this account. |
| 45 | Fixing only 20mm bore GI tubing medium gradeafter thoroughly cleaning of pipe retrived from serial item no.39.00 here-in- before with all newfittingsfixed to walls and ceilings or laid in floorscomplete all as specified and directed by Engineer-in-Charge. Note:The rate of cleaning of old servicable pipe is included in this item and nothing shall be paid extra on this account. |
| 46 | Supply and Fixing in replacementPVC valveless, syphonic action type, flushing cistern, 10 litres capacity, low level, white, with inlet, ball valve, float and handle , with and including brackets, with andincluding 32 mm dia flush pipe of polyethylene of low or high density of PVCcomplete all as specifiedand as directed by Engineer-in- charge. |
| 47 | Supply and Fixing in replacement vitreous china wash down water closet pan ( pedestal pattern ) white , with and including stainless steelJet , with andincluding ‘P’ or ‘S’ trap , with and includingseat covercomplete all as specified and directed by Engineer-in-Charge. |
| 48 | Supply and Fixing in replacement Vitreous chinawash hand basin,Vitreous chinawhite, flat back, size of 550mmx 400 mm with Mild steelbrackets, with and including cutting for and pinning in ends of brackets or erecting stand, with and including waste fittings of brasschromium plated ,with and including 32mm dia PVC waste pipe of required length complete all as specified and directed. as directed by Engineer-in-Charge. |
| 49 | Supply and Fixing in replacement 15mm bore Pillar tap fancy type Chromium Plated, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixedcomplete all as specified and directed by Engineer-in-Charge. |
| 50 | Supply & fixing in replacement rotational mouldedpolyethylene water storage tank white colour of capacity 500 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including making inlet and out let connection with and including 20mm boreball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (polythene float) complete all as specified and as directed by Engineer-in-charge. Note: The rate of 20mm boreball valves, high pressure of PTMTis included in this iterm and nothing shall be paid extra on this account. |
| 51 | Supply and fixing in replacementgrating doom 125mm dia with waste hole made of PTMT , weight not less than 40mm eachcomplete all as specified and directed by Engineer-in-Charge. |
| 52 | Supply and fixingin replacement PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints laid in trenches or in floorscomplete all as specified and directed by Engineer-in-Charge.Note: Excavation and earth work shall be measured and paid seperately under appropriate items of Schedule of BoQ. |
| 53 | Supply and fixinginreplacement PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints laid in trenches or in floorscomplete all as specified and directed by Engineer-in-Charge.Note: Excavation and earth work shall be measured and paid seperately under appropriate items of Schedule of BoQ. |
| 54 | Supply and fixingin replacementPVC bends 110 mm bore in any radiuscomplete all as specified and directed by Engineer-in-Charge. |
| 55 | Supply and fixingin replacementPVC bends 75 mm borein any radius complete all as specified and directed by Engineer-in-Charge. |
| 56 | Supply and fixing in replacement 600mm x 450mm size bevelled edge mirror selected quality 5mm thick glass mounted on 6mm thick commercial ply and fixed to wooden plugs with chromium plated brass screws and cup washers, including aluminium frame / beading alround made of aluminium channel, complete all as specified and directed by Engineer-in-Charge. |
| 57 | Supply and fixingin replacement 15mm bore bib tap cast copper alloy, chromium plated, fancy type with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge. |
| 58 | Supply and fixingin replacement 15 mm borebrass Chromium Plated mixer for mixing hot and cold water , screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipescomplete all as specified and directed by Engineer-in-Charge. |
| 59 | Supply and fixingin replacement 15 mm bore stop valve / angle valve,Chromium Plated, cast copper alloy screwed down , high pressure with crutch or butterfly handlefancy type complete all as specified and directed by Engineer-in-Charge. |
| 60 | Material and Labour forpreparing wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-charge. |
| 61 | Material and Labour forPreparation of oldplastered or unplastered surfaces of ceiling (with using by broomingdown or steel wire burshing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots ) and with and includingapplying two coat of white washcomplete all as specified and directed by Engineer-in-Charge. |
| 62 | Dismantling of plain or corrugated steel sheeting any gauge, thickness including roof covering etccomplete all as specified and directed by Engineer-in-Charge. |
| 63 | Supply & FixingPre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specifiedcomplete all as specified and directed by Engineer-in-Charge. |
| 64 | Supply & FixingPre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engineer-in-Charge. |
| 65 | Material & Labourin replacement weather boarding in 2nd class hardwood ,clean swan , plain , 20 mm thick or feather edges , 15 mm to 20 mm thick and fixed with 30 mm laps jointscomplete all as specified and directed by Engineer-in-Charge. |
| 66 | Demolition of wall and ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs including cover fillets etccomplete all as specified and directed by Engineer-in-Charge. |
| 67 | Supply & Fixinganodised aluminium snap grid of size 605mmx 605 mm frame work for false ceilingcomplete all as specified and directed by Engineer-in-Charge. |
| 68 | Supply & Fixing10mm thick PVC insulation panels with EPS stuck to 1 mm thick plain PVC sheet suitably placed in false ceiling anodised aluminium snap gridcomplete all as specified and directed by Engineer-in-Charge. Note:The measurement and payment of grid made of aluminum shall be considered under serial item No.66.00 here-in- before. Nothing shall be extra paid in this item. |
| 69 | Supply and Fixing in replacement Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mmcomplete all as specified and directed by Engineer-in-Charge. |
| 70 | Material & Labour for water proofing treatment to sunken slab using Acrylate - Silicon - based technology by OEM along with following stages as described under serial no. (a) to (g) complete all as specified and directed by Engineer-in-Charge.(a) Removal of all material.(b) Surface preparation.(c) Water proofing of cracks and joints.(d) Screed repairs.(e) Treatment of roof with stagnant water.(f) Water proofing application.(g) Testing to include ponding test.NOTE : The work shall be got executed all as specified in particular specification and as directed by GE through OEM only. |
