|
| 1 | Dismantling Plain or Corrugated Steel Sheeting any gauge, thickness, including nainital or similar roof coverings/sunshade, complete all as specified and as directed. |
| 2 | S&F Pre-painted colour galvalume aluminium zinc coating GI based corrugated steelsheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 3 | Dismantling Timber Scantlings, 40 Sqcm and over in Section, in any Position, as in Unframed Work, complete all as specified and as directed. |
| 4 | Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of bed blocks for hold fasts comple all as specified and as directed |
| 5 | Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts comple all as specified and as directed |
| 6 | M&L Pressed steel frames for doors with one or more rebates size of frame 125 x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.Note:-Pressed Steel Frame should be filled with PCC 1:3:6 Type C-0 (Using 12.50mm graded stone aggregate) and cost of PCC shall be deemed included in quoted rate |
| 7 | M&L Pressed steel frames for doors with one or more rebates size of frame 105 x 60 mm including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed.Note:-Pressed Steel Frame should be filled with PCC 1:3:6 Type C-0 (Using 12.50mm graded stone aggregate) and cost of PCC shall be deemed included in quoted rate |
| 8 | M&L Plain Cement Concrete type B-1, (1:2:4) (20mm graded crushed stone aggregate) as in Coping bed plate,hold fast etc,block benching,channeling slightly rounded or chamfered angle and throating including form work and finishing all exposed faces of cement concrete complete all as specified and as directed. |
| 9 | S&F Flush Shutters 35 mm thick, Solid Core Construction with Particle Board Core and Plywood Face Panels, Commercial type on Both Sides, complete all as specified and as directed. |
| 10 | M&L Second Class Hardwood 30mm thick Glazed and Skeleton Shutters, open rebated and prepare to receive Glass, Gauge, etc. divided into Squares with Plain Chamfered or Rounded, mitred Sash Bars of any Numbers, Edges ofFraming plain chamfered or rounded fittedwith cutand mitred Beads forsecuring Glass, etc sizes of members of Shutter as speci fied in MES Schedule Part-I Section 8, Clause No. 8.20(b) and fitted to Wooden Chowkat, complete all as specified and as directed. |
| 11 | S&F Factory Made Solid PVC Door Frame of size 50 x 47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed. |
| 12 | S&F Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC \"C\" Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side, and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Panelling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive, etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the \"C\" Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, complete all as specified and as directed. |
| 13 | S&F Powder coated Aluminium anodised doors, windows, partitions and ventilators using aluminium sections of size and type approved by Engineer-in-Charge including jointing cleats,snap beadingetc, completeallas specified and as directed. |
| 14 | S&F Aluminium anodised (powder coated) Three track sliding window frame with shutters with ( 2 nos glazed and one wire gauzed shutter)including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete andglazing with and including 5 mm thick tinted glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36 mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers etc with the following section of frame and shutter (A) Sections for shutter (i) \"H\" section 39 x 20 x 1.50 mm thick (ii) \"Interlock\" section 39 x 20 x 1.50 mm thick (iii) \"Edge & Bottom\" section 41 x 20 x 1.50 mm thick(B) Section for frame (i) Top & Sides 123 X 29.70X 1.50mm not less than 1.30 Kg /RM(ii) Bottom 123 X 29.70 X 1.50mm not less than 1.502 Kg /RM complete all as specified and directed . |
| 15 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil puttyin square not exc 0.50 sqm in each pane complete all as specified and directed. |
| 16 | S&F 4 mm thick frosted/ pin headedglassin ventilatorshutters complete all as specified and directed by Engr-in-Charge |
| 17 | S&FButt hinges extruded aluminium alloy with galvanised MS sheet hinges pin anodised of 100mm size, type B-21 complete all as specified and as directed. |
| 18 | S&FButt hinges extruded aluminium alloy with galvanised MS sheet hinges pin anodised of 75mm size, type B-21 complete all as specified and as directed. |
| 19 | S&F Aluminium alloy Handle 150mm long, Extruded Section, Fabricated type, anodized and fixed, complete all as specified and as directed. |
| 20 | S&F Aluminium alloy Handle 100mm long, Extruded Section, Fabricated type, anodized and fixed, complete all as specified and as directed. |
| 21 | S&F 300mm long Aluminium alloy, anodised, Sliding Door Bolt with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminium alloy and fixed, complete all as specified and as directed. |
| 22 | S&F Aluminium anodized, Barrel Tower Bolt 200mm long, Extruded Section and fixed, complete all as specified and as directed. |
| 23 | S&F Aluminium anodized, Barrel Tower Bolt 150mm long, Extruded Section and fixed, complete all as specified and as directed. |
| 24 | S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staplescomplete all as specified and as directed.NOTE: Cost of Second Class Hardwood Bead-ing shall deemed to be included against Glazed and Skeleton Shutter. |
| 25 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level complete all as specified and as directed. |
| 26 | M&L 75 mm thick PCC 1: 3:6 type C2 using 20mm graded agg finishing even and smooth using extra cement as in plinth protections/path and laid fair in alternate bays including filler joints with sealing compound grade \"A\" complete all as specifed and as directed. |
| 27 | Demolition of brick work/stone masonry, built in cement mortar including all quoins, arches, pillars etc butexcluding ashlars facings, dressed stone work and pre-cast concrete articles complete all as specified and as directed. |
| 28 | Material and labour for fly ash /concrete best quality modular bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) having compressive strenght notless than 75 kg/Sq cm complete all as specified and directed. |
| 29 | Dismantling Wrought Iron or Mild Steel Work, viz. MS Flat Iron (Wind Tie) and Similar Work including MS Bolts, Nuts, etc., complete all as specified and as directed. |
| 30 | M&L Framed Work such as Grills, Gratings, etc. with ends of Bars shouldered and/or riveted, or forged into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework of Water Tanks and Similar Work, conforming to Fe-290, Gde-E-165, including taking out old guard bars from old chowkats complete all as specified and as directed. |
| 31 | M&L Rendering15mm thick in Cement Mortar 1:4 on Brick Walls or on Concrete Surfaces, finishing plastered surfaces Even and fair without using Extra Cement complete all as specified and as directed. |
| 32 | M&L Rendering10mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, finishing plastered surfaces Even and fair without using Extra Cement complete all as specified and as directed. |
| 33 | M&L Preparing new Surfaces of Walls andapplying Two Coats of DistemperOil Emulsionover a coat of primer andapplied over 1mm thick BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and even complete all as specified and directed. |
| 34 | M&L Preparing new plastered surfaces of wall and appplying two coats of acrylic exterior weather coat over acoat of primer withdamp proof care andapplied over 2mm thick BIRLA/JK water proof wall care putty including rubbing with emmery paper to make wall surface smooth and evenas per manufacturer instrcution and applied by approved applicatorcomplete all as specified and directed. |
| 35 | M&L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed. |
| 36 | M&L Coloured Glazed ceramic tiles 450 x 350 mm x 6 to 7mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface over 10mm screed bed or bedding layer in Cement mortar 1:4.complete all as specified and as directed. |
| 37 | M&L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) light shade, polished, area of each tiles notexceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface over 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed. |
| 38 | All as per item No 37 above but in skirting over 10mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. |
| 39 | Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed. |
| 40 | All as per item No 39 above but 20mm bore complete all as specified and as directed. |
| 41 | S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces,back nuts, unions, caps and plug etc ) and fixed complete to wall and ceilingor laid in/on floor complete all as specified and directed, |
| 42 | All as per item No 41 above but 20 mm bore complete all as specified and as directed. |
| 43 | S&F 15 mm bore pillar tap,fancy type cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 44 | Supply and fix, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 45 | S&F 5mm bore dia brass choromium platedwall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 46 | S&F Central hole for Hot and Cold water supply basin mixer, brass chromium plated screwed down for iron pipes,including necessary fittings etc as in repair , complete all as specified and as directed. |
| 47 | Supply and fix, stop valve/angle cock, cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions complete all as specified and directed. |
| 48 | S&F in repair Chromium Plated waste coupling heavy full thread 32mm (brass) fixed tostainless steel sinkincluding necessary fixing arrangementas in repair complete all as specified and directed. |
| 49 | Supply and fix,as in repair, 32 mm dia PTMT 610 mm long waste pipe suitable for WHBcomplete all as specified and directed. |
| 50 | Supply and Fixed 75 mm dia of outlet PVC(SWR)floor trap, plain with granting including jointing with solvent cement complete all as specified and directed. |
| 51 | Supply & Fix 20 mm dia CP curtain rod (colour coated) with two Nos of socket (decorative type) complete for doors/window opening complete all as specified and directed |
| 52 | Material and labour for preparation of new and previously un-treated wood and wood base surfaces of any description, not otherwise described over 10cmwidth or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 53 | Material and labour for preparation of new and previously un-treated steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer completeall as specified and directed. |
| 54 | Supply and fix, sheet glass self assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with cromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 55 | S&F Vitreous china wash hand basin,oval under counter base white size 530x440x200mm flat back typeincluding32mm dia Brass Chromium Plated Waste Fitting and 15mm dia PVC connector pipe and tap , a pair of Cast Iron Brackets duly painted Stand including Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 including taking down/out unserviceable Wash Hand Basin and connected Items complete all as specified and as directed. |
| 56 | S&F White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float and Handleincluding Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed including taking down/out unserviceable Flushing Cistern and connected Items, complete all as specified and as directed. |
| 57 | S&F Mirror Bevelled Edge 600x450mm, Selected quality Glass, mounted on 6.0mm thick AC Building Board or Commercial Ply-wood and fixed to Wooden Plugs with Chro-mium Plated Brass Screws and Cup Washers including Taking down unserviceable Mirror, complete all as specified and as directed. |
| 58 | Supply and fix,as in repair,15 mm dia 600 mm long connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed. |
| 59 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixingor removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed. |
| 60 | Supply and fix, 110mm bore PVC (SWR) pipe single socketed with rubber ring joints fixed to walls complete all as specified and directed. |
| 61 | All as per item No-60 above but 75 mm bore complete all as specified and as directed. |
| 62 | Supply and fix, PVC (SWR) bends (any radius) for 110 mm bore PVC pipes complete all as specified and directed. |
| 63 | All as per item No-62 above but75 mm bore complete all as specified and as directed. |
| 64 | Supply and fix, PVC cowls 110 mm bore complete all as specified and directed. |
| 65 | S&F pre-laminated particle board, exterior grade, prelaminated both sides with decorative choice laminations , fixed with screws to timber frame work thickness of 18/19 mm complete all as specified and directed. |
| 66 | S&F Mild steel Continuous (Piano) Hinges, width of Flaps (when open) 30mm, bright finish and fixed, complete all as specified and as directed. |
| 67 | S&F in repairs stainless steel fancy type,bright finish handles fixed with screw,of 125mm size complete all as specified and as directed. |
| 68 | S&F bal catches with 8 mm dia steel ball magnet catches for cuboard shutter including strking plate as approved etc completeall as specified and as directed |
| 69 | S&F Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 70 | M&L TMT bars5mm dia and over upto and including 10mm dia in stirrups, spacers and binderscut to length, bent to shape required, including cranking, bending spirally for hooping forcolumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 71 | M&L Reinforced cement concreteType B1 1:2:4(20mm graded aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span and the like complete all as specified and as directed. |
| 72 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed. |
| 73 | DismantlingWall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 74 | S&Ffalse ceiling with powder coated exposed G.I. grid suspension system Everest E-Grid T-2430 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200 mm c/c) consisting of Main Runner (3600 mm long, 0.25 mm thick, 38mm height) Cross Tee (1200mm/600mm long, 0.25 mm thick, 27 mm height) and Wall Angle (3000 mm long, 0.4 mm thick, 22 mm height). The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300 mm c/c. The Main Runners to be placed @ 1200mm, The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm x 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600mm x 600mm. Grid of module size 600mm x 600mm shall be supported by 6 mm dia G.I. wire from purlins/soffit. 4 mm thick High Pressure Steam Cured Everest Non Asbestos Fibre Cement Designer Ceiling Board or equivalent quality having Density>1200 Kg/m3, size 595mm x 595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7&8, should be placed in the Grid module to form a False Ceiling complete all as specified and as directed. |
| 75 | Dismantling Structural steel work includings door, gates, etc and similar works complete all as specified and as directed |
| 76 | S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with connecting plates, etc confirming to Fe 410-W (Gde 250 quality A) complete all as specified and directed. |
| 77 | Supply and fix, as in repair, Overhead Shower 125 mm dia Round Shape Single Flow (Brass Chromium Plated) with Rubit Cleaning Syste, including fixing to steel pipe or union of 15mm bore all as specified and direcetd. Essco Cat No Eos-542A or equivalent complete all as specified and directed. |
| 78 | S&F Floor door stopper of brass body and tongue, anodised with hard drawn steel spring (overall length of cover plate 150mm) complete all as specified and as directed. |
| 79 | S&F 300mm ordinary mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 80 | S&F 100 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 81 | S&F Tubular Towel rail chromium plated 600mm long 20mm dia D type with chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed. |
| 82 | S&F Chromium Plated soap dish fixed to wall with necessary fixing arrangementas in repair complete all as specified and directed. |
| 83 | S&F Rotational Moulded Polyethylene (HDPE) Water Storage Tank 1000 Litre Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I including provision of 25mm x 100mm GI nippples with check nuts for inlet, outlet wash and overflow pipe including Lowering of old/unserviceable Water Storage Tank of any description, complete all as specified and as directed. |
| 84 | Supply, lay and fix in repair25 mm bore galvanized iron water tubing medium grade including all fittings and fixed laid in trenches complete all as specified and directed. |
| 85 | S&F 25 mm bore Gun metal gate valve as per IS : 778-84,marked Class-2 Pressure tested 2.4 Mpa with iron wheel head, screwed both ends for iron pipes or for unions as in repair complete as all specified and as directed. |
| 86 | Supply and fix in repair Ball valves 25 mm dia high epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete all as specified and directed. |
| 87 | Taking down point wiring(light, fan, socket and power complete including fixtures andfittings such as switches ceiling roses, pendents , regulators, sockets, light fittingsetc. removing materials to store for keeping in safe custody for refixing or for taking credit (credit for above items should be made as per conditions separately) and making good distrubed surfaces of walls, floors, etc.complete all as specified and as directed by Engineer-in-Charge. |
| 88 | Taking down main switches and DBs of any type and make including wooden board / junction box etc complete all as specified and directed. |
| 89 | M&L Point wiring with PVC insulated and unsheathed FRLSH cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts grade cable conforming to IS - 694 1990 drawn through and including PVC casing caping of suitable size with all accessories including fabricated MS terminal boxes fixed flush with wall surface with 3 mm thick plastic masonite laminated sheet top cover fixed with cadmium screw for mounting switches, sockets,regulator etc including 1.5 sq mm FRLSH stranded PVC insulated and unsheathed copper conductor earth continuity conductor to common earthand connecting to earth dolly for one light or fanpoint controlled by one switch single pole one way for light/ ceiling fan/ exhaust fan /call bell point/ Switch socket outlet 5 amps complete all as specified and as directed.Note: Red coloured cable shall be used for live connection,black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board.. |
| 90 | All as per item No. 89 above but for 3 pin 5 Amps switch socket combination on independent board with 1.5 sq mm copper cable, complete all as specified and as directed. |
| 91 | All as per item No. 89 above but for 5 Amps socket point on the same board controlled by one switch, complete all as specified and as directed. |
| 92 | All as per item No. 89 above but for 3 pin 15 Amps switch socket combination on independent board with 2.5 sq mm copper cable, complete all as specified and as directed. |
| 93 | S&F Switch piano, flush type, Single pole one way, 5/6 Amps 230/240 Volts, white/ivory finish complete all as specified and directed. |
| 94 | S&FSwitch socket combination multipurpose 2 in 1, 3 pin 6 Amps 230/240 volt flushtype complete all as specified and as directed. |
| 95 | M&L for switch socket combination 2 in One , 3 pin 5 Amps & 16 Amps flush type, universal, complete all as specified and as directed. |
| 96 | S&FCeiling rose, surface bakelite, 65 x 50 mm,three terminals complete all as specified and directed. |
| 97 | S&F Ceiling fan regulator electronic Step type, solid state, , 240 volts,complete all as specified and as directed. |
| 98 | Supply and fix LED tube light fitting of 18 W with tube (4 Ft) 240 V Wall mounted LED batten polycarbonate houseing and integrated electronic driver with high efficient LEDs 18 Watt with acessories suitable for operation on AC single phase 220/230 volt 50 Hz supply complete with all accessories, internally pre-wired and including connection, complete all as specified and as directed. |
| 99 | Supply and fix LED tube light fitting of 9 W with tube (2Ft) 240 V Wall mounted LED batten polycarbonate houseing and integrated electronic driver with high efficient LEDs 9 Watt with acessories suitable for operation on AC single phase 220/230 volt 50 Hz supply complete with all accessories, internally pre-wired and including connection, complete all as specified and as directed. |
| 100 | S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittingscomplete all as specified and as directed. |
| 101 | S&F on wall security light luminaire for 1x 30 w LEDwith deep drawn housing with 25 mm bore GI Light grade 1.00 M long street light bracket complete with and including cable for connection from ceiling rose with3 core 1.5 Sqmm PVC insulated stranded copper conductor complete all as specified and directed. |
| 102 | Supply and fixing sheet metal enclosure for MCB, DBs, phosphatised, Powder coated , Tripplepole and neutral (TPN) 415 Volt , double door, suitable for 4 way with dim rail earth and neutral bar complete all as specified and directed. |
| 103 | S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with common bus bar at incomming end complete all as specified and directed |
| 104 | S & F MCB \"C\" series Triple pole and nutral 100 Amps, breaking capacity 10KA complete all as specified and directed |
| 105 | S & F MCB \"C\" series Single pole and nutral 40-63 Amps, breaking capacity 10KA,complete all as specified and directed |
| 106 | S & F MCB \"C\" series single pole 6 to 32 Amps, breaking capacity 10KA,complete all as specified and directed |
| 107 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) including provision of fan hook complete all as specified and directed |
| 108 | M&L for pvc exhaust fan of size 250 mm sweep, single phase,230volts Ac with louver shutter /grill and connection complete incl cutting hole and making good disturbed surface and necessary fixing arrangements. |
| 109 | Supply & Fix electric storage heater of 25 Ltr capacity, 5 Star in replacement with heating element 2000 W,thermostat, inlet, outlet connection pipe and air vent connections including all fixing arrangement for mounting on wall and necessary water inlet and outlet connections complete all as specified and directed. |
| 110 | S&F metal clad socket out let with MCB single pole and nutral 20-32 Amp, 240 V including sheet metal enclosure complete fixed on flat iron 32x6 mm or 2nd class hard wood wooden board including complete electrical connection by proper size of copper lugs complete all as specified and directed. |
| 111 | M&L Sub main wiring with 2 runs of single core FRLSH type PVC insulated unsheathed stranded copper conductor of size 4.0 Sqmm and one run of PVC insulated unsheathed multistrand copper conductor FRLSH type of size 4.0 Sqmm as earth lead drawninto rigid non metalic PVC conduit of size 20 mm dia including all fittingscomplete all as specified and as directed.Note:- Two runsof 4 Sqmm conductor as main wireand one run of 4 Sqmm conductor as earth wire with one run of PVC conduit shall be measured as one unit. |
| 112 | M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less thab 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I, Complete all as specified and as directed. |
| 113 | Supply, laying, jointing and testing LT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm, 4 core. Note:1. Excavation and earth work will be measured and paid seperately. |
| 114 | Excavation in trenches, in any type of soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr in depth , laying of cable or pipes (where provided for protection of cable) etc and getting out trimming the sides, forming bottom surfaces to required level complete all as specified and all as directed. |
| 115 | M&L for 40 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed. |
| 116 | M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the cable laid in trenches) of 230mm spreding thickness and consolidated ( punned) upto 180mm thickness, complete all as specified and as directed. Note : punned thickness will only be measured for payment purpose. |
| 117 | Supply and laying of well burnt bricks, sub class \"B\" laid flat in trenches for protection of cable complete all as specified and directed. |
| 118 | Returning and filling including spreading, levelling, watering and well rammingin layers not exceeding 25 Cm thick all as specified and directed by Engr-in-Charge. |
| 119 | Removing of surplus soil to a distance not exceeding 50 Mtrs and depositing where directedat a level not exceeding 1.5 Mtr above the starting point complete all as specified. |
| 120 | NOTES:1.The amount of schedule of credit shall be deducted from the total of this BOQ for arriving at contract sum.2.The rates for RCC/PCC shall deemed to include the cost of formwork, shuttering etc., required for complete and proper execution of the item. Refer Schedule \"A\" notes for details. |
