|
| 1 | Earth work in excavation of foundation trenches and column foundation and pits in all kind of soil within the hard soil or gravelly soil within the initial lead of 50 mtr and lift of 1.50 mtr including rough dressing and breaking clods to maximum 5 cm to 7 cm in size and laying in layers not exceeding 0.30 m in depth as per direction of the Engr.-in-charge. |
| 2 | Filing foundation and trenches and plinth with sand well watered and compacted with appropriate mechanical compactor top surface dressed and levelled to proper gradient including cost of all materials, labours, sundries, T&P all taxes,royalties loading and unloading etc complete as per direction of the Engr.-in-charge. |
| 3 | Providing and laying plain concrete( 1:3:6) nominal grade mix using PSC in foundation and bottom layers of flooring and below pile cap etc using 40 mm size downgradees Hard Crusher Broken Granite aggregate of approved quality from approved quarry including weigh batching Mixing in appropriate mechanical mixers ,lowering ,laying and compacting to proper level including curing and including cost of all materials, labours, sundries, T&P all taxes,royalties loading and unloading etc complete as per direction of the Engr.-in-charge. |
| 4 | Brick work with Flyash Bricks 25 cm x 12cm x 8cm size having crushing strength not less than 75kg/cm² with dimensional toleranceꜙ 8 percent in cement mortar (1:4) in superstructure (5\" thick Wall) including cost , conveyance, taxes,royalties,loading and unloading of all materials ad all labour for scaffolding, watering and curing, sundries,T&P etc complete as per direction of the Engr.-in-charge. |
| 5 | GROUND FLOOR |
| 6 | A- F & P |
| 7 | B- Super Structure. |
| 8 | Brick work with Flyash Bricks 25 cm x 12cm x 8cm size having crushing strength not less than 75kg/cm² with dimensional toleranceꜙ 8 percent in cement mortar (1 : 6) with portland slag cement (PSC) immersing the bricks for minimum 6 hours in water before use with necessary projections, splays, cutting circular moulding,corbelling etc. including cost ,conveyance ,taxes,royalties,loading and unloading of all materials and all labour for scaffolding, watering and curing, sundries,T&P etc complete as per direction of the Engr.-in-charge. |
| 9 | A- GROUND FLOOR |
| 10 | i- F & P |
| 11 | ii- Super Structure. |
| 12 | RCC work of M-20 grade with 20 mm and down grade black hard granite ( crusher broken) stone chips including hoisting and laying with cost, carriage and royalty of all materials etc complete with Centering and shuttering as per direction of the Engineer-in- charge. |
| 13 | i- Foundation- ( Base ) |
| 14 | ii-RCC plinth Beam |
| 15 | iii- Column |
| 16 | iv-Lintel & Window seal |
| 17 | v-RCC Roof Slab/Chajja. |
| 18 | Supplying Reinforcement of required diameter and approved quality for the RCC items with reinforcement for concrete work shall be Fe 500 conforming to Is 1786 and strictly to the latest Indian Standards including straightening, cutting to sizes,bending and binding the grills,lifting and placing in position as per design complete including cost of bars, binding wires for binding reinforcement which shall be soft & of annealed mild steel of 16 SWG and shall conform to IS 280, all labour, sundries, T&P and scaffolding ( linear measurement of reinforcement only will be taken and quantity will be calculated on standard weight) for all heights etc complete as per direction of the Engineer-in-charge as per approved specification |
| 19 | GROUND FLOOR ( Steel Requirement) |
| 20 | Supplying ,fabricating ,fitting ,fixing and Erection of M.S. angle / square (hallow ) pipe proplex trusses and purlins including all cost, conveyance etc. complete as per direction of Engineer-in-Charge. |
| 21 | Providing, supplying, fitting and fixing of proplex purline made out of M.S.angle/ channel or Square pipe etc including cost and erection charges complete. |
| 22 | Supplying ,fitting ,and fixing of precoated Galvanized iron profile proplex sheet semi gloss of total coated thickness 0.45 mm in roof drilling holes in wind ties including fixing of ridges ,vallys ,windties etc complete including cost of sheet and all fittings all taxes labour ,T & P etc complete as per direction of Engineer -in-charge. |
| 23 | Providing,supplying ,fitting and fixing of holding bolts,nuts and washers etc complete fpr proplex. |
| 24 | 16 mm thick Cement Plaster with Cement Mortar (1:6) using portland slag cement ( IS-455) to in side surface of Brick massonary walls including raking out joints to a depth of 12 mm. scarpping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level as per direction of the Engineer-in- charge including cost of all materials ,conveyance ,loading ,unloading ,all taxes and royalties, all labour for scaffolding ,watering and curing,sundries and T&P etc.complete as per approved specification. |
| 25 | GROUND FLOOR |
| 26 | Providing 12 mm thick Cement Plaster with Cement Mortar (1:6) using portland slag cement ( IS-455) to Out side surface of Brick massonary walls including raking out joints to a depth of 12 mm. scarpping and cleaning the surface and finishing the plastered surface smooth to proper plumbs and level as per direction of the Engineer-in- charge including cost of all materials ,conveyance ,loading ,unloading ,all taxes and royalties, all labour for scaffolding ,watering and curing,sundries and T&P etc.complete as per approved specification. |
| 27 | GROUND FLOOR |
| 28 | 12 mm thick Cement Plaster in C.M. (1 : 4 ) over brick work with neat Cement punning for skirting including cost , carriage and royalty of all materials complete. |
| 29 | GROUND FLOOR |
| 30 | C. C. (1: 2: 4 ) with using 12mm CBHG chips for C.C. /R.C.C. work including hoisting & laying including cost, carriage and royalty of materials. |
| 31 | Supplying ,fitting & fixing vetrified tiles in floors of Size 600 mm x 600mm of approved make confirming to IS: 13755 laid on 25 mm thick Cement Mortar(1 : 1) and filling joints with white cement of approved quality including cost of all materials, labour ,T&P etc required for the work all complete as per direction of the Engineer-in-charge. |
| 32 | Supplying ,fitting and Fixing of Vetrified tile in dados of size 600mmx 600mm of approved make confirming to IS13755 laid on 12 mm thick cement mortar(1:3) and filling joints with white cement of approved quality inluding cost of all materials etc. |
| 33 | Fixing Ceramic ( Anti Skirting) Tiles in floors , treads or steps and landings on 25mm thick bed of Cement Mortar ( 1: 1 ) (1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to matching shades of the tiles including rubbing &polishing complete. |
| 34 | Fixing of Ceramic wall tile on walls over 12mm thick C.P. (1:3) jointed with neat cement slurry including cost of materials , Labour, T&P etc. required for the work. |
| 35 | Providing , supplying, fitting & fixing M.S. Iron grills with M.S. gratings in doors,windows, ventilators, cage latrines & opening etc with cost, carriage, taxes of materials ,labour charges etc. as per direction of Engineer-in -charge. |
| 36 | Supplying, fitting , & fixing of PVC Door including all cost of materials & labour charges etc.complete. |
| 37 | Finishing wall surface with Acrylic wall putty (Water based) of approved make and finishied smooth and even surface to receive painting including cost of scaffolding stageing charges with cost of all materials taxes , labour T & P etc complete. |
| 38 | Painting Doors and Windows two coats with any approved paint on new wood/iron work including cost of enamel paint over a coat of primer. |
| 39 | Primering 1 coat with any approved primer including cost of primer & labour all complete. |
| 40 | Wall painting two coats with weather seal coat paint of approved shade on new work to give an even shade including cost of paint and labour etc all complete. |
| 41 | Wall painting two coats with Plastic emulsion paint of approved shade on new work to give an even shade including all cost of materlias, labours and T & P. |
| 42 | Providing fitting,fixing of Al.door section of 9202 as vertical member 9201 as top member and 9200 as bottom and middle member with frame section no 9221 with tappered clip No- 4660 and the frame to be completed by means of jointing angle No- 1855 including all cost of labour T&P,hire charges etc complete as per the direction of Engineer -in-charge. |
| 43 | Supplying ,fitting ,fixing up window ( sliding type) made up aluminium section 9778 as windows frame section no-4095 , 4096 and 9777 , 3994 as shutter frame with 5mm thick black glass as pannel fitted with rubber beading all including locking arrangement including all fittings with cost of all materials ,taxes,labour and T&P etc complete. |
| 44 | Provision for Cost of Display board with painting and writing charges. Please Enable Macros to View BoQ information |
