|
| 1 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : |
| 2 | Of area 3 sq. metres and below |
| 3 | Providing and fixing on wall face unplasticisedRigidPVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 4 | 75 mm diameter |
| 5 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 6 | Superior Hard Wood Category -II (A) (Black Chuglam, Thingam, Toungpeing, Pylnma, Koko and Mahawa. |
| 7 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202(PartI)non-decorative type,core of blockboardconstruction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 8 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 9 | Providingand fixing panelled or panelled glazed shutters for doors and windows and clerestory windowsincluding IS: 12817 marked stainless steel butt hinges of required size with stainless steel screws, excluding panelling which will be paid for seperately, all complete as per direction of Engineer-in-Charge. |
| 10 | Superior Hard Wood Category-II (A) (Black Chuglam, Thingam, Toungpeing, Pylinma, Koko and Mahawa)35 mm thick shutters |
| 11 | Providing and fixing cup boardshutters with 25 mm thick veneered particle board IS : 3097 marked, exterior grade (Grade l), of approved make, including Ilnd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge. |
| 12 | With non decorative veneering on both sides |
| 13 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 14 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 15 | 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms |
| 16 | Providing and fixing PTMT soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms. |
| 17 | Providing and fixing brass bib cock of approved quality : |
| 18 | 15 mm nominal bore |
| 19 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Semi rigid pipe |
| 20 | 32 mm dia |
| 21 | 40 mm dia |
| 22 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : |
| 23 | 100 mm diameter |
| 24 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 25 | 15 mm nominal bore |
| 26 | Providing and fixing PTMT pillar cock of approved quality and colour. |
| 27 | 15 mm nominal bore, 107 mm long, weighing not less than 110 gms |
| 28 | ProvidingandfixingP.V.C.lowlevelflushingcisternwithmanually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 29 | 10 litre capacity - White |
| 30 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 31 | With cement mortar 1:4 (1 cement : 4 fine sand) |
| 32 | Finishing walls with Acrylic Smooth exterior paint of required shade: |
| 33 | Old work (Two or more coat applied @ 1.67 Itr/ 10 sqm) on existing cement paint surface |
| 34 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand andmanufacturerincluding applying additional coats wherever required to achieve even shade and colour |
| 35 | Old work (one or more coats) |
| 36 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
| 37 | One or more coats on old work |
