|
| 1 | For Moorang BOP w.e.f S.No01 to S.No37 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) |
| 2 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 3 | Kota Stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) |
| 4 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for : Shelves (Cast in situ) |
| 8 | Removing dry oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 9 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below |
| 10 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 11 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 12 | Providing and fixing flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be paid separately):12 mm thick |
| 13 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board :510x1040 mm bowl depth 250 mm. |
| 14 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.: Flexible pipe 40 mm dia. |
| 15 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms. |
| 16 | Providing and fixing PTMT grating of approved quality and colour. Circular type :100 mm nominal dia |
| 17 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White vitreous China wash Basin size 630x450 mm with a pair of 15 mm CP Brass Pillar taps. |
| 18 | Providing and fixing soil, waste and vent pipes :100 mm diameter :Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 19 | Providing and fixing plain bend of required degree.100 mm dia :Sand cast iron S&S as per IS : 3989 |
| 20 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100 mm diameter Sand cast iron S&S as per IS – 3989 |
| 21 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore. |
| 22 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore |
| 23 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20 mm nominal dia Pipes |
| 25 | Providing and fixing C.P. brass angle Cock for basinpoints of approved quality conforming to IS:8931 15mm nominal bore |
| 26 | Supplying Installation Testing Commissioning of 02 Nos commercial ceiling mounted box type Exhaust/chimney hood, each chimney made of stainless steel overall size 60\" x 30\" x 24\" made out of SS 202 Grade fitted with stainless steel baffle filter, stailess steel louvers and incandescent high globe & flame proof tube light of length upto 4\" including wiring complete etc as required and SITC of axial flow fan 30\" (3 Phase) coupled with 1HP motor including wiring etc as required complete and as per directed by Engineer-in-charge. |
| 27 | Supplying Installation Testing Commissioningof Gl ducting with 24 SWG GI sheet complete with bend, louvers, roof cap, grit etc as required complete and as per directed by Engineer-in-charge. |
| 28 | Supplying and installation of steel racks Stainless Steel Grade 304 Shelf Rack With 5-Shelf (including top shelf) Shape of support structure Rectangular hollow type, 90 mm Ground clearance, 1.2 mm Support structure material thickness, 915 mm Width of shelf rack ± 10 mm, 405 mm Depth of shelf rack ± 10 mm, 1675 mm Height of shelf rack ± 10 mm, 1395 mm Height of support structure ± 10,40 mm x 40mm Size of support structure for kitchen storage. |
| 29 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group B |
| 30 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 31 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 A switch |
| 32 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.:3 pin 5/6 A socket outlet |
| 33 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 A Switch. |
| 34 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 Pin15/16 A Socket Outlet. |
| 35 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 12 Module (200mmX150mm) |
| 36 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 12 Module (200mmX150mm). |
| 37 | Supply & Installation of Exhaust Fan 450 mm Heavy duty of approved brand as per directed by Engr-in-Charge ISI Make with two year Warranty. |
| 38 | For ThangiBOP w.e.f S.No 38 to S.No 74 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) |
| 39 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 40 | Kota Stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) |
| 41 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 42 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 43 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 44 | Centering and shuttering including strutting, propping etc. and removal of form for : Shelves (Cast in situ) |
| 45 | Removing dry oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 46 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area 3 sq. metres and below |
| 47 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 48 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 49 | Providing and fixing flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. complete (frame work to be paid separately):12 mm thick |
| 50 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board :510x1040 mm bowl depth 250 mm. |
| 51 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.: Flexible pipe 40 mm dia. |
| 52 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms. |
| 53 | Providing and fixing PTMT grating of approved quality and colour. Circular type :100 mm nominal dia |
| 54 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White vitreous China wash Basin size 630x450 mm with a pair of 15 mm CP Brass Pillar taps. |
| 55 | Providing and fixing soil, waste and vent pipes :100 mm diameter :Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 56 | Providing and fixing plain bend of required degree.100 mm dia :Sand cast iron S&S as per IS : 3989 |
| 57 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.100 mm diameter Sand cast iron S&S as per IS – 3989 |
| 58 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm nominal bore. |
| 59 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore |
| 60 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 61 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20 mm nominal dia Pipes |
| 62 | Providing and fixing C.P. brass angle Cock for basinpoints of approved quality conforming to IS:8931 15mm nominal bore |
| 63 | Supplying Installation Testing Commissioning of 02 Nos commercial ceiling mounted box type Exhaust/chimney hood, each chimney made of stainless steel overall size 60\" x 30\" x 24\" made out of SS 202 Grade fitted with stainless steel baffle filter, stailess steel louvers and incandescent high globe & flame proof tube light of length upto 4\" including wiring complete etc as required and SITC of axial flow fan 30\" (3 Phase) coupled with 1HP motor including wiring etc as required complete and as per directed by Engineer-in-charge. |
| 64 | Supplying Installation Testing Commissioningof Gl ducting with 24 SWG GI sheet complete with bend, louvers, roof cap, grit etc as required complete and as per directed by Engineer-in-charge. |
| 65 | Supplying and installation of steel racks Stainless Steel Grade 304 Shelf Rack With 5-Shelf (including top shelf) Shape of support structure Rectangular hollow type, 90 mm Ground clearance, 1.2 mm Support structure material thickness, 915 mm Width of shelf rack ± 10 mm, 405 mm Depth of shelf rack ± 10 mm, 1675 mm Height of shelf rack ± 10 mm, 1395 mm Height of support structure ± 10,40 mm x 40mm Size of support structure for kitchen storage. |
| 66 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group B |
| 67 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 68 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 A switch |
| 69 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.:3 pin 5/6 A socket outlet |
| 70 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 A Switch. |
| 71 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 6 Pin15/16 A Socket Outlet. |
| 72 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 12 Module (200mmX150mm) |
| 73 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 12 Module (200mmX150mm). |
| 74 | Supply & Installation of Exhaust Fan 450 mm Heavy duty of approved brand as per directed by Engr-in-Charge ISI Make with two year Warranty. |
