|
| 1 | Providing service of technical nature for day-to-day maintenance for attending repair / breakdowns/servicing of electrical installations at staff quarters of various types, A, B, C, D, E and Scientist apartments having 1, 2, 3 & 4 BHK accommodations in G+1, G+2, G+3 & pump houses etc. shown in Annexure -1.in shift wise on all working days throughout the year including holidays as indicated under specical conditions clause no.... attached. The scope of work shall be executed deploying following catagary indicative man power.a) Highly skilled (Supervisor Staff) - 1 No (315 man-days per year)b) Skilled (Wireman) - 3 person (315 man-days per person per year)c) Unskilled (Khallasi) - 3 person (315 man-days per person per year)The work shall be complied as per detailed scope of work and other terms & conditions specified in the tender document. |
| 2 | Supply of the following materials to prevent the delay in attending break downs for period of contract as & whenrequired. Installation / replacement of these consumables / spares shall be carried out through man power as indicated under item No.1 |
| 3 | LED Down lighter (COB Type) (System lumen efficacy ≥105 < 120 lm/Watt) 18 Watt LED Recessed / surface Down lighter (Round / square / Rectangular) COB Type of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10% , P.F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) < 19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be confirming to relevant BIS standards. Manufactures Word Mark / Name Engraved / Embossing / Screen printing on housing Complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. System lumen efficacy ≥105 and <120 lm/Watt output. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) Powder coated die cast /Extruded aluminium Body etc,. all completed as required. |
| 4 | LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥105 <120 lm/Watt) Supplying of Street light LED fixture, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, freq 50/60 Hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4- 5, Driver efficiency >85%, THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP66,IK-10, CRI >80 , under voltage and over voltage protection,EMIEMC as per CISPR-15, lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in the exisitng 32 mm / 40 mm dia pipe, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report , CCT 6000°K / 6500°K (As per ANSI Bin) , SDCM (Standard Deviation Color Matching). Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C) etc,. all complete as required. |
| 5 | 30 watt |
| 6 | 72 watt |
| 7 | Ceiling rose, 3 pin, 5 A ISI marked |
| 8 | S.P. 5/6 A, one way modular switch, ISI marked |
| 9 | S.P. 5/6 amps, two way modular switch, ISI marked |
| 10 | S.P. 15/16 amps, one way modular switch, ISI marked |
| 11 | 3 pin 5/6 A modular socket outlet, ISI marked |
| 12 | 6 pin 15/16 amps modular socket outlet, ISI marked |
| 13 | Modular bell push single / double module, ISI marked |
| 14 | Stepped type Modular Fan regulator (2 module) |
| 15 | Modular blanking plate (1 module) |
| 16 | 1.5 sq. mm, ISI marked, FRLS/HFFR PVC insulated, single core copper conductor cable |
| 17 | 2.5 sq. mm ISI marked, FRLS/HFFR PVC insulated, single core copper conductor cable |
| 18 | 4.0 sq. mm ISI marked, FRLS/HFFR PVC insulated, single core copper conductor cable |
| 19 | 16/0.20 mm (0.5 sqmm) twin core FRLS/HFFR PVC sheathed, flat flexible copper cable |
| 20 | 6 A, to 32 A, ratings, DP MCB, \"C\" curve, 10 KA breaking capacity |
| 21 | 6 A, to 32 A, ratings, TP MCB, \"C\" curve, 10 KA breaking capacity |
| 22 | 6 A, to 32 A, ratings, TPN MCB, \"C\" curve, 10 KA breaking capacity |
| 23 | 40 A, rating, 2 pole RCCB, 30mA |
| 24 | 32 mm dia X 2.00 metres long G.I. pipe bracket for mounting of street light fitting. |
| 25 | Paint |
| 26 | 2.5 Mfd Capacitor |
| 27 | Modular single mounting plate for 2 module |
| 28 | Modular single mounting plate for 4 module |
| 29 | Modular single mounting plate for 6 module |
| 30 | Surface mounted 2 modular type PVC boxes for fixing of modular type swtiches, sockets and other accessories all complete as required. |
| 31 | Surface mounted 4 modular type PVC boxes for fixing of modular type swtiches, sockets and other accessories all complete as required. |
| 32 | Surface mounted 6 modular type PVC boxes for fixing of modular type swtiches, sockets and other accessories all complete as required. |
| 33 | 18 / 20 W Constant current LED driver input voltage 230V, PF 0.95 THD < 10% operating temperature 10 to70ºC output voltage 28V-40 VDC, O/P current 450mA & number of channel singlesuitable for 18W /20 W, LED square / Round shaped panel luminaire. |
| 34 | 30 W Constant current LED driver input voltage 230V, PF 0.95 THD < 10% operating temperature 10 to70ºC output voltage 28V-40 VDC, O/P current 450mA & number of channel singlesuitable for 12W, LED square / Round shaped panel luminaire. |
| 35 | 72 W Constant current LED driver input voltage 230V, PF 0.95 THD < 10% operating temperature 10 to70ºC degree C output voltage 36V DC, O/P current 1050 mAsuitable for 60W - 72 W, LED Street light luminaire |
| 36 | 63 Amp main & 60 Amp stand-by 3P, 415 Volt, 3 Phase, 50 Hz (TPN) Microcontroller-based with built-in SMPS Automatic Changeover with Current Limiter (ACCL) with Built-in Time Delay for fail safe changeover,Electronic interlock, neutral isolation, overload tripping, LED status indicators (Mains / Gen / Overload). The ACCL should be Suitable for Din Rail mounting. |
| 37 | 30 Amp main supply & 20 amp stand-by supply, 215 Volt, 1 Phase, 50 Hz (SPN) Microcontroller-based with built-in SMPS Automatic Changeover with Current Limiter (ACCL) with Built-in Time Delay for fail safe changeover,Electronic interlock, neutral isolation, overload tripping, LED status indicators (Mains / Gen / Overload). The ACCL should be Suitable for Din Rail mounting. |
| 38 | 240Volt, AC supply, 50 Hz, Digital daily time switch with 4 ON / OFF program cycles per day for street lighting panel and it is suitable for panel mounting. The digital daily time switch should have LCD display, real time clock in 24 Hour format operated with 1.5V x AA sized external battery. |
| 39 | Polycarbonate 1×20W/22W LED batten fixture of standard length (approx. 4 feet). The fixture comprising integrated LED with pre-wired electronic driver mounted on a thermoplastic batten base. The fitting shall be fixed directly to the sheet frame with all accessories including clamps, screws, saddles and copper wire connections complete. The luminaire shall have a system efficacy ≥100 lm/W, color temperature of 6500K (cool day light white), CRI >80, and confirming to BIS/ISI standards suitable for operation on 230V, AC supply. |
| 40 | 10 W Bulk head with pressure die cast aluminium housing acrylic diffuser (IP 65 protection). The bulk head fitting comprising integrated LED with pre-wired electronic driver mounted on base. The fitting shall have color temperature of 6500K (cool day light white) and confirming to BIS/ISI standards suitable for operation on 230V, 50Hz AC supply. |
