Name of Work:- Uxj Ikfydk Ifjkn Vksjs;K Ds Dseil Dk;Kzy; Esa Uohu Ehfvx Gky Esa Ih0oh0lh0 Qkj Lhfyx Yxkusa Dk Dk;Za
Sl. No.
Item Description
1
5mm Thick Solid foam PVC panel of required Size with moulded/ extruded beading of approriate desingshape and size as per manufacturer s specifiction ( to secure the Panel insert tight in Place within the Style and rails of shutter) matching the Colour and shade of Suhutter frame None Decorative Type etc all Complete . D.S.R. S.I.124.1 @3457.20 x0.757x3420-106/107=2815.39
2
providing and fixing False cilling at all Height including providing and fixing frame work made of special section Power Pressed from M.S. Sheets and galvanized with zing Coating of 120 gms/sqm. (both side including) as Per IS 277 and Consisting of angle cleats of size 25mm wide x1.6 mm thick with flanges of the ceilling dash fasner 12.05 mm dia x50 mm long with 6 mm dia bolts other flange of clat fixed of the angle hangers of 25x10x0.50 mm of required lenght with nutus & Bolst of required size and other and of angle hanger fixied with intemadiate G.I. channels 45x15x0.9 mm runnig at the spaing of 1200mm centre to center to which th ceilling section 0.5 mm thick bottom wedege of 80mm with tapered flanges of 26mm each having lips of 10.5 mm at 450 mm center to center shall be fixid in a directionp perpendicular to G.I. intermediate channel with conneciting clips made out of of 2.64 mm dai x230mm long G..i. wire at every junction inluding fixing premetre channels 0.5 mm thick 27mm high having flanges of 20mm and 30mm long the perimeter of ceilling fixied to wall /partition with the help of rawal plugs at 450 mm centre with 25 mm long dry wall screws @230mm c/c inluding jointing compound and gypsum board to celling section and perimeter channel with the help of dry wall scews of size 3.5x25mm at 230mm c/cincluding jointing and finshing to flush finish of tapered and squre edges of the board with recommended jointing compound jointing tapes finshing with with jointing compound in 3 layers Covering up to 150mm on both side of jpint and two coats of primer suitable for bord all as per manufatures specification and also including the cost of making opennigs for light fifiting grills diffusers cutouts made with frame of perimer channels suitably fixed all Complete as per drawing specfiction and dirction of the Engineer in chrege but Excluding the Cost of painting in D.S.R. S.I.1245.1. @@3457.20 x0.757x3420-106/107=1146.71 Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
