|
| 1 | Taking down cement plaster on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 2 | M&L for rendering 15mm thick plaster on fair faces of brick work or concrete surfaces in cement mortar 1:6finished surfaces even and smooth without using extra cement, complete all as specified and directed. |
| 3 | M&L for preparation of new / old lastered surface of wall and applying two coat of distemper oil emulsion over a coat primer, completeall as specified and directed. |
| 4 | M&L for preparation of old decorated plastered & unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot mould moss and efflorescent salts trading oil and greasy spots, filling holes cracks with wall care putty and applying two coats of distemper oil emulsion on wall, completeall as specified and directed. |
| 5 | M & L for preparation of old painted wood or wooden based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, completeall as specified and directed. |
| 6 | Dismantling floor hearth or wall tiles including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises of MoD, completeall as specified and directed. |
| 7 | M&L Coloured Glazedjoint less ceramic tiles 300 x 200 x 7mm / 450X350X7mm thickin vertical surfacesetc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 rough finished surfaces to receive tiles, completeall as specified and directed. |
| 8 | M&L coloured joint less Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but notexceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including Screed bed or bedding layer of mortar 15mm thick for laying floor finished in cement mortar 1:6, complete all as specified and directed. |
| 9 | M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including Screed bed or bedding layer of mortar 15mm thick for laying floor finished in cement mortar 1:6, complete all as specified and directed. |
| 10 | M&L for Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 rough finished surfaces to receive tiles, completeall as specified and directed. |
| 11 | M&L 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in sub base finished even and fair surfaces without using extra cement, completeall as specified and directed. |
| 12 | S&F wash down water closet (Pedestal pattern) includingstainless steel water jet including connection to drain pipe (outgoing pipe) and to flush pipe, anti syphonage pipe etc, completeall as specified and directed. |
| 13 | S&F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, completeall as specified and directed. |
| 14 | S&Fvitreous china wash hand basin white flat back size 550mmx400mm excluding, waste chain and plug and porcelain stopper but including brackets, cutting for and pinning in ends of brackets or erecting stand, waste coupling and waste pipe, completeall as specified and directed. |
| 15 | S&F 600 mm x 450 mm beveled as mirror of selected quality glass,mounted on 6 mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screwes and cup washers, completeall as specified and directed. |
| 16 | Supply and fixing PVC valve less, symphonic action type, flushing cistern 10 ltr, low level, white, with inlet, ball valve, float and handle including brackets, completeall as specified and directed. |
| 17 | S & Ffancy type pillar taps cast copper alloy chromium plated Swan neck screwed down high pressure with crutch or butterfly handle of 15mm bore, complete all as specified and directed. |
| 18 | S & Ffancy type stop valve cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle of 15mm bore, complete all as specified and directed. |
| 19 | S&Ffancy type bib tapcast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle for iron pipe or brass ferrule and fixing of 15mm bore pipe, complete all as specified and directed. |
| 20 | S&F Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipes with 1.25mtr long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed. |
| 21 | S&F brass chromium plated Tubular towel rail, 20mm dia, 60cm long bitween flage fancy type, completeall as specified and directed. |
| 22 | S&F PVC connection pipe 15mm dia with PTMT nut for length 450mm, completeall as specified and directed. |
| 23 | S&F in repair Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), includingVitreous China Urinal partitions slabs terminating about 40cm above floor line, complete all as specified and directed. |
| 24 | S&F CPVC pipes outer dia 20mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors (including all fittings), completeall as specified and directed. |
| 25 | S&F CPVC pipes outer dia 25mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors (including all fittings), completeall as specified and directed. |
| 26 | S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, step clamps, including all fittings (Any type of \"T\"/tee, bend, Y, Branch piece single/double, couplers, reducers, vent coil, access door, junction single/double, equal/unequal, any type of trap (Floor trap/Gully trap etc) with grating etc, 75mm dia, fixed to walls/floor/trenches etc, complete all as specified and directed. |
| 27 | All as per item No.26 here in before but for110mm dia pipes. |
| 28 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness including cover fillets of any description, completeall as specified and directed. |
| 29 | M&L for exposed GI frame/grid system duly powder coated for module size of 600x600mm suitable for lay-in aluminium / mineral fibre ceiling tiles, having main \"T\" runner of 24mm size, suspended at 1200mm C/C and cross \"T\" runner of 24mm size, suspended at 1200mm C/C with interlocking arranagements to form grid 600x600mm, perimeter runner/channel of 15mm size , main and cross \"T\" runnersupported by 4mm GI rod from slab/Roof/Wall angle etc with and including all taking down and refixingof electrical fixing and fixture or any type of accessories and making good of disturbed wall surfaces with POP and two coats of oil emulsion distemper , as required to match the existing surfaces, complete all as specified and directed. |
| 30 | M&L for 0.50mm thick aluminium False Ceiling, lay-in type,having tegular edge profile, duly powder coated, perforated type suitable for false ceilinggrid/frame module of 600x600mm size, complete all as specified and directed. |
| 31 | M&L for 4mm thick Designer Fibre Ceiling Tile of size 595x595mm in ceiling fixedwith screws \"U\" angle, \"T\" and all other accessories which will required to fixing the ceiling as per manufacurer\"s instructions, complete all as specified and directed. |
| 32 | S&F 5mm thick any Colour /design PVChollow block WallPanellingalong with PVC angle, cornoer, strips etc complete required at site, complete all as specified and directed. |
| 33 | Taking down chowkhats or frame of any description (without taking off shutter from the frame) area not exc 1.5 sqm, completeall as specified and directed. |
| 34 | All as per item No. 33 abovebut exc 1.5 sqm and not exc 4 Sqm. |
| 35 | S&F Powder Coating aluminium frame for doors, windows,(minimum thickness of powder coating 50 micron) ventilators with one or more rebates including joining cleat for fixing etc, completeall as specified and directed. |
| 36 | S&F Powder coatingaluminium window and ventilator shutters, side hung/fixed type without sash bars,aluminium sectionweighing 0.55 kg/ m including necessary joining cleats, zing clips, ruber neoprene packing, anodised aluminium snap beading screwsanodised aluminium fittings such as peg stay, Tower bolt 150mm long 2 No. hinge type B-21 100 mm long 2 Nos, suitable handle 1 No (minimum thickness of powder coating 50 micron),complete all as specified and as directed |
| 37 | S&F Powder coatingaluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading, locking arrangements/mortice lock 4 leavers,screws etc,complete all as specified and as directed |
| 38 | Supply and fixing Anodised aluminium grill powder coated(anodised transparent or dyed to required shade according IS : 1868/ of approved design / pattern, with approved standard section and fixed to the existing window frame with CP brass / stainless steel screws @200 mm centre to centre including cutting the grill to proper opening size for fixing and operaton of handles and fixing approved anodised aluminium standard section around the opening,complete all as specified and as directed. |
| 39 | S&F 4.80mm thick sheet glass selected quality plain/ tinted in squares n.exc 0.5 sqm each pane,complete all as specified and as directed. |
| 40 | S&F 5.50mm thick sheet glass selected quality plain/ tinted in squares not exc 0.5 sqm each pane,complete all as specified and as directed. |
| 41 | Taking down aluminium / copper point wiring for (light, fan, socket or power and bell) including unserviceable fittings such as switches, ceiling roses, lamp holders, sockets, regulators, call bell etc and making good the disturbed surfaces of walls, floors etc, complete all as specified and directed. |
| 42 | Taking down MCB /DB /TPN / SPN of any make and type including dismantling all electrical connections from MCBs / MCCB / isolators and making good to disturbed surface, complete all as specified and directed. |
| 43 | Disconnecting and taking down old existing light fitting of any description from any position, complete all as specified and directed. |
| 44 | Disconnecting and taking down old existing sub main wiring of any description from any position, complete all as specified and directed. |
| 45 | M&L for Point wiring using proper colour coding complete with 1100 Volts grade 1.5 Sqmm, single core, PVC insulated, unsheathed cable with multistranded copper conductor with FRLS grade, confirming to IS-694 in and including PVC medium grade conduit not less than 25mm dia. ISI marked with all accessories concealed in wall/ceiling/ floor /roof etc, including GI terminal boxes with 3 mm thick plastic laminated sheet cover having necessary cutting for fixing switches/ socketsincluding 1.5 Sqmm PVC insulated, unsheathed, multistranded copper conductor, FRLS 1100 volts grade (green colour) as earth wire, connected to common earth dolly for:-One light point/ fan/Exhaust controlled by one switch. |
| 46 | All as per item No 45 above but One three pin switch socket 5 Amp outlet on same board. |
| 47 | All as per item No 45 above but One three pin switch socket 5 Amp outlet on independent board. |
| 48 | All as per item No. 45 above but with 4 sqmm PVC insulated FRLS, unseathed, cable confirming to IS-694, part-II with multistranded copper conductor cable in and including PVC conduit. |
| 49 | Supplyandfixing Switch piano type one way 5 amps 240 volts, complete all as specified and directed. |
| 50 | Supplyandfixing Socket outlet 3 pin 5 Amps flush type, complete all as specified and directed. |
| 51 | Supplyandfixing Switch piano flush type single pole one way 15 amps 240 volts, complete all as specified and directed. |
| 52 | Supplyandfixing for Socket out let 2 in 1, 3 pin, 5 and 15 amps flush type, complete all as specified and directed. |
| 53 | S&F ceiling rosesurface bakelite 65 mm x 50mm with 3 terminals, complete all as specified and directed. |
| 54 | S&F Lamp holder PVC/ Polycarbonate insulated body with back plate for angle/batten fittings, complete all as specified and directed. |
| 55 | S&F in replacement Sheet metal enclosure DB SPN, 8 Way with 200 Amp rated bus bar, 240 Volts, double door for fixing MCB\"s, isolators etc, having IP-43 protection, complete all as specified and directed. |
| 56 | S&F 240V, 10KA \"C\" curve miniature circuit breaker (MCB) SPN 40 to 63 Amps in the MCB DB complete with connection testing and commissioning, complete all as specified and directed. |
| 57 | Supply and fixing in repair MCB, SP, 6 Amp to 32 Amp, 240 Volt, 50HZ, 10 KA, `C` Series, making electrical connection with the help of Lugs / thimbles, complete all as specified and directed. |
| 58 | Supply and fixing MCB, SP, 6 Amp to 32 Amp, 240 Volt, 50HZ, 10 KA, `C` Series, making electrical connection with the help of Lugs / thimbles, complete all as specified and directed. |
| 59 | S&F LED light fitting 1 x 20W, 220V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and directed. |
| 60 | S&F in repair LED luminaries 600mm x 600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed. |
| 61 | M&L for Sub main wiring with 2 X 6.0 Sqmm (Nominal Area) PVC insulated FRLS unseathed, multi stranded 1100 volts grade copper conductor cable single core drawn through into and including non metalic PVC concealed conduit not less than 20 mm dia medium grade and its accessories including one run of 6 Sqmm PVCinsulated copper conductor as earth wire including cutting chases and making good, complete all as specified and directed. Note :- Surface conduit shall be laid in ceiling portion only. |
| 62 | M&L for Sub main wiring with 2 X 4.0 Sqmm (Nominal Area) PVC insulated FRLS unseathed, multi stranded 1100 volts grade copper conductor cable single core drawn through into and including non metalic PVC concealed conduit not less than 20 mm dia medium grade and its accessories including one run of 4 Sqmm PVCinsulated copper conductor as earth wire including cutting chases and making good, complete all as specified and directed. Note :- Surface conduit shall be laid in ceiling portion only. |
| 63 | S&F exhaust fan, steel body heavy duty AC single phase 230V of size 300mm sweep with blades and frame and louvers including making hole on wall built in any type of cement mortar suitable for fixing nut and bolts and making good in cement motor 1:4, complete all as specified and directed. |
| 64 | S&F single pole and neutral encloser with two pin and earth plug and socket complete with one single pole MCB of 20 amps and all as per the specifications, complete all as specified and directed. |
| 65 | S&F sheet metal enclosure with socket plug top and MCB, single pole and neutral encloser with two pin and earth plug and socket complete with one single pole MCB of 32 amps complete for AC, complete all as specified and directed. |
| 66 | M&L Earthing with galvanised steel earth plate electrode of size 60cmX60cmX6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m bellow normal ground level, connected to the galvanised earth lead by means of bolts, nuts and washers of galvanised iron or steel using GI or steel wire 4.00 mm diaas earthing lead as shown in electrical plate No 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on complete including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:2:4 type B-1 using 20mm grade stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe, 15mm dia GI light grade earth lead protection pipe and pre-cast earth pit cover made of RCC (1:1.5:3) type A1 duly reinforced with 8mm dia TMT bar @ 150 c/c both ways, one lifting handle made of 10mm dia TMT bar embedded in cover slab and cover, wire, copper lugs etc mesh charcoal and common salt inalternate layer of 15cm thick, complete all as specified and as directed. |
| 67 | M&L in repair earthing with galvanised steel earth plate electrode of size 60cmX60cmX6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m bellow normal ground level, connected to the galvanised earth lead by means of bolts, nuts and washers of galvanised iron or steel using GI or steel wire 4.00 mm diaas earthing lead as shown in electrical plate No 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on complete including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:2:4 type B-1 using 20mm grade stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe, 15mm dia GI light grade earth lead protection pipe and pre-cast earth pit cover made of RCC (1:1.5:3) type A1 duly reinforced with 8mm dia TMT bar @ 150 c/c both ways, one lifting handle made of 10mm dia TMT bar embedded in cover slab and cover, wire, copper lugs etc mesh charcoal and common salt inalternate layer of 15cm thick, complete all as specified and as directed. |
| 68 | S&F MCCB 4 pole, 415 V, fixed thermal and fixed magnetic setting of cap 250 Amp, 36 KA, complete all as specified and directed. |
| 69 | S&F MCCB 4 pole, 415 V, fixed thermal and fixed magnetic setting of cap 160 Amp, 36 KA, complete all as specified and directed. |
| 70 | Supply andfixing in replacement vertical TPN Loadline DB, doble door, 6 way with 250 Amp bus bar 415 Volt sheet metal enclosure suitable for incomer MCCB 4 Pole including suitable dummy plate single pole, complete all as specified and directed. |
| 71 | Supply andfixing in replacement vertical TPN Loadline DB, doble door, 4 way with 160 Amp bus bar 415 Volt sheet metal enclosure suitable for incomer MCCB 4 Pole including suitable dummy plate single pole, complete all as specified and directed. |
| 72 | Taking Out old unserviceable LT UG cables of sizes having cross sectional area 70 sqmm, 4 /3.5 /2 core, complete all as specified and directed. |
| 73 | Supply, laying, connecting, testing of XLPE insulated, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor, cross sectional area 70 Sqmm 3.5 core, laid in trenches/floors or passing through pipes etc including jointing materials such as cable glands, lugs etc and accessories for making connection at both ends, complete all as specified and directed. |
| 74 | M&L for earthing with galvanised steel earth plate electrode of size 60cmX60cmX6.00mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate no less than 1.5m bellow normal ground level surrounded from all sides by 15cm thick and packed layer of charcol dust and common salt filling in alternatie layers and electrode connected by galvanised iron strip 32mmx6mm by means of bolts, nuts and washers connected to test termination point protected by 40mm bore GI pipe light grade and GI pipe light grade 20mm bore for watering and inlcuding funnel, wire mesh, RCC pit cover and PCC chamber with PCC 1:2:4 type B-1 includingnecessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil to a distance not exceeding 50mtr all as specified and shown in Electrical Plate No 3 of SSR Part-I and testing, complete all as specified and directed.Note :(a)The unit rate shall include for GI water pipe, protection pipe wire mesh, funnel, excavation, RCC pit cover, PCC. Test point, GI strip 32x6mm from top of earth plate upto 7.5 mtr.(b)PCC pit shall be provided at least 1.5m away from the earth pit and extra cost of additional length of water pipes and fixing junction, elbow etc shall be deemed to be included in the unit rate.(c)RCC pit cover shall be precast of RCC 1:2:4 tyupe B-1, 80mm thick reinforced with XPM weighing not less than 4 Kg/sqm. |
| 75 | Excavation in trenches in soft or loose soil, not exceeding 1.5 metre deep and not exceeding 1.5 metre wide and getting out, complete all as specified and directed. |
| 76 | Returning, filling in trenches including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soft/loose soil, complete all as specified and as directed. |
| 77 | Removing surplus excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and as directed. |
| 78 | Material & labour for sand cushioning in trenches and well ramming in layers with 8 cm below and 15 cm above the cable with fine dry sand for cable protection, complete all as specified and directed.Note :- Only punned thickness of sand 18 cm shall be measured and paid. |
| 79 | M&L for brick protection with sub class \"B\" bricks (old size) laid dry, flat in trenches over cable with longest dimension perpendicular to the axis of the cable, complete all as specified and directed specified. |
| 80 | Supply, fabrication, erection, connecting, testing, commissioning in repair CPRI approved LT panels cubical outdoor type weather and vermin proof made out of 3mm thick CRCA sheet of suitable size with front and rear opening and locking arrangement epoxy powder coated having colour siemens grey 400 Amps capacity Copper bus bar for phase 3 Nos and 1 No 300 amps bus bar for neutral mounted on epoxy insulator necessary copper control capacity control wiring heat shrinkable RYB coloured sleaves over bus bar for identification floor mounting angle iron base of size 50 x 50 x 6 mm earth shields circular holes at bottom/top to receive incoming and outgoing cable, cable lugs, cable gland of size as required panel suitable for the following control/filaments sensible for 3 phase 50 Hz 415V system complete comprising the following and including necessary PCC in 1:2:4 using 20mm graded stone aggregate/brick work in cement mortar 1:4 for mounting of panel.(a) 4 Nos bus bar high conductivity copper strips proper insulated for phase (RYB) with 400 Amps & neutral rating 300 amps and mounting on porcelain support:- 01 SetINCOMER: 400 Amp, 4 pole MCCB, 35 KA-01 No,Digital VAF meter with inbuilt selector switch & CT Coil – 01 NoSet of LED type indicating lamps – 01 NoOUTGOINGS:Copper Bus Bar 400 Amp TPNOUTGOINGS:250 Amp, MCCB 25 KA 415 V, - 2 Nos.160 Amp, MCCB 25 KA 515 V, - 3 Nos.63 Amp, MCCB TPN 16 KA 415 V - 2 Nos. |
| 81 | Note :(i)Layout diagram of panel shall be produced by contractor for approval of Accepting Officer before placing order to manufacturer and panel shall be brought at site as per approved drawing.(ii) Contractor is required to submit purchase vouchers, e-way bill and test certificates while claiming payment of LT panels. |
| 82 | Supply, laying, connecting, testing of XLPE insulated, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor, cross sectional area 16 Sqmm 2 core, laid in trenches/floors or passing through pipes etc including jointing materials such as cable glands, lugs etc and accessories for making connection at both ends, complete all as specified and directed. |
| 83 | S&F in replacement Sheet metal enclosure DB SPN, 4 Way with 200 Amp rated bus bar, 415 Volts, double door for fixing MCB\"s, isolators etc, having IP-43 protection flush mounting, complete all as specified and directed. |
| 84 | S&F in replacement Sheet metal enclosure DB SPN, 4 Way with 200 Amp rated bus bar, 240 Volts, double door for fixing MCB\"s, isolators etc, having IP-43 protection flush mounting, complete all as specified and directed. |
| 85 | S&F 415V, 10KA \"B\" curve miniature circuit breaker (MCB) TPN 40 to 63 Amps and current carrying capacity in DB complete with connection testing and commissioning, complete all as specified and directed. |
| 86 | S&F 240V, 10KA \"C\" curve miniature circuit breaker (MCB) SPN 6 to 32 Amps in the MCB DB complete with connection testing and commissioning, complete all as specified and directed. |
