|
| 1 | Taking down chowkhats or frames exc 1.5 sqm but n.exc 4 sqm(without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc complete all as specified. |
| 2 | Taking down chowkhats or frames n.exc 1.5 sqm (without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc complete all as specified. |
| 3 | Taking down shutters of any description exc 1 Sqm and n.exc 2.00Sqm each and removing from site complete all as specified |
| 4 | S& F factory made Pressed steel frames confirming to IS , having profile of size 125 x 60 mm, 1.25 mm thick MS Sheetfor doors with one or more rebates including necessary fixing lugs, lock strike plate, etc. and fixing only 100 mm size hinges, with one shop coat of zinc chromate primer and fixing complete all as specified and as directed. |
| 5 | S& F factory made Pressed steel frames confirming to IS , having profile of size 105 x 60 mm, 1.25 mm thick MS Sheetfor doors with one or more rebates including necessary fixing lugs, lock strike plate, etc. and fixing only 100 mm size hinges, with one shop coat of zinc chromate primer and fixing complete all as specified. |
| 6 | M&L for PCCtype C-1, 1:3:6 using 20mm graded aggregate as in bed block for fixing of hold fast, filling concrete inframe filling , gaps in between glazed & fly proof steel window, cills, railing up to 60 cm in height etc including necessary form work as required all complete all as specified and as directed. |
| 7 | S&F ofSolid PVC Door Frame of size 50mm x 47mm made out of 5mm thick plain colour printed PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 8 | Material & labour Factory made solid panel PVC plain colour door shutter 30mm thick (style)consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat molded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side &as gap insert for top rail & bottom rail paneling of wood grain printed PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to gathers with solvent cement supplying & fixing the frame at site complete all as specified and as directed. |
| 9 | S&F of factory made 30 mm flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both side etc complete all as specified and as directed. |
| 10 | S&F for factory made 35mm thick 2nd class hard wood gauged and skeleton shutter open rebated and prepared to received gauge etc (without sash bars) for fly proof door shutter, edges of framing plain, chamfered or rounded, fitted with cut of any mitered beads for securing gauge etc, size of members of shutter as specified in SSR Part-I section 8 clause No.8.23(a) and fitted to chowkhats complete all as specified and as directed. |
| 11 | S&F of SS butt hinges, medium weight cold rolled of size 100mm complete all as specified and as directed. |
| 12 | S&F 150 mm long Aluminum anodized barrel tower bolts of extruded section and fixed complete all as specified . |
| 13 | Supply & fixing aluminum anodized extruded fabricatedtype handle 150mm long complete all as specified. |
| 14 | S&F Aluminum alloy anodized sliding door bolt 250 mm long with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section complete all as specified . |
| 15 | S&F door stopper of aluminum alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified . |
| 16 | S&F steel window with side hung shutters including projecting type hinges with steel handles steel peg stay fixing lugs complete with glazingbar 10 cm dovetailed or welded incl one shop coat red oxide primer including taking down of old steel windows of any size all as per drg No. CESZ/2018/TD-07 sheet No. 1 to 3complete all as specified and as directed. |
| 17 | Description all as per Item No. 16 above but without glazing bars complete all as specified. |
| 18 | S&F steel ventilator top hung shutter including hinges, steel peg stay, fixing lugs etccomplete with or without glazing bars including taking down of old steel ventilators of any size all as per drg No. CESZ/2018/TD-07 sheet No. 1 to 3 complete all as specified. |
| 19 | M&L for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings;framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as Specified. |
| 20 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as Specified. |
| 21 | M&L Mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 22 | M&L for preparation of new or previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 23 | M&L for preparation of new primer applied steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint complete all as specified and as directed. |
| 24 | M&L for preparation of new or previously undecorated wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of Pink primer complete all as specified and as directed. |
| 25 | Hacking out old broken unserviceable glass panes (any thickness, size, quality or description) for metal frame including punching or drilling out old glazing pins/spring clips and providing & fixing new one complete all as specified and as directed. |
| 26 | S&F of 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as directed. |
| 27 | Supply & fixing 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 28 | M&L for 5.5mm thick sheet glass ordinary quality and glazingin square exc. 0.5 Sqm in each pane as in Aluminum door & windows including supplying and fixing of necessary aluminum cleats, rubber gaskets etc and making good complete all as specified |
| 29 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed. |
| 30 | S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm complete all as specified and as directed. |
| 31 | Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed. |
| 32 | M&L for brick work with fly ash bricks old sizestraight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 33 | M&L for brick work with fly ash bricks old sizestraight or curved on plan exc 6m mean radius built in cement mortar 1:6 (except bricks)complete all as specified and as directed. |
| 34 | Taking down cement plaster on wall of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 35 | M&L for 15 mm thick plaster of cement mortar (1:4) rendering on fair faces of brick work in two layers (10mm + 05mm) mixed with water proofing compound in top layer 200 ml per bag of cement or as per manufacturer\"s instructions finishing the surface fair and even without using extra cement complete all as specified and as directed. Note : Liquid WPC will be measured and paid separately under relevant item of this schedule. |
| 36 | M&L for rendering 5 mm thick cement plaster on ceiling cement mortar(1:3) finished the surface even and fair without using extra cementcomplete all as specified and as directed. |
| 37 | M&L 15mm thick rendering in cement mortar 1:6 onfair faces of brick work or concrete surface finished fair and even (without using extra cement) complete all as specified and directed. |
| 38 | Supply onlyliquid water proofing compound complete all as specified and as directed. |
| 39 | M&L for preparation of new surfaces and applying two or more coats of100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 sqm over new surfaces complete all as specified and as directed. |
| 40 | M&L forpreparation of newly ceiling plastered surfaces and applying three coats of white wash on wall as specified as directed. |
| 41 | M&L for preparation of newly plastered surfaces and applying twocoats of acrylic distemper white or tinted etc over a coat of primercomplete all as specified and directed. |
| 42 | M&L for complete removal of existing treatment and preparation of old surfaces and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 sqm over including priming coat of exterior primer applied @ 0.90 liter/ 10 sqm over new surfaces complete all as specified and as directed. |
| 43 | M&L for one coat ofacrylic distemper on old surface of wallinclude brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spotscomplete all as specified and as directed. |
| 44 | M&L for one coat ofwhite wash on ceiling of old surface with preparation of old surface shall include brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spotscomplete all as specified and as directed. |
| 45 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises including taking downcement plastercomplete all as specified and as directed. |
| 46 | M&L for non skid coloured joint free ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but n. exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to match as in floor complete all as specified and directed. |
| 47 | M & Lforcoloured non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc set and jointed in neat cement slurryover 15mm thick screed bed or bedding layer in CM (1:6) as in floor and pointed in whiter or coloured cement to matchcomplete all as specified and as directed |
| 48 | M&L for Glazed ceramic coloured tiles in vertical surface 300x600x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed white or colour cement to matchcomplete all as specified and as directed. |
| 49 | M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floorsetc. set and jointed in neat cement slurry over 15mm thick screed bed or bedding layer in CM (1:6) as in floor/skirting and pointed in white or coloured cement to match complete all as specified. |
| 50 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces to receive a wall tiles using cement mortar 1:4as specified as directed. |
| 51 | M & L for 15 to 18 mm thick granite (of any type) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms, corner shelf, Flat shelf and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 15 mm thick screed bed (1:4)including rounding the exposed surfaces of granitecomplete all as specified and as directed. |
| 52 | M&L for Machine cut kota stone slab flooring 15-20 mm thick over 15 mm thick cement screed bed using cement mortar 1:6laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror finish) complete all as specified and as directed. |
| 53 | All as per item No. 52above but asKota stone slab 18-20mm thick in riser of steps, skirting, dado, pillarcomplete all as specified and as directed. |
| 54 | Demolition of cement concrete (un-reinforced ) in ground floors and pavings n.exc 15 cm thickness (below or above ground level) all as specified and as directed. |
| 55 | Material & labour for PCC (1:3:6) Type C-1 (20 mm graded aggregate) as in plinth protection including finishing the concrete surface even and smooth w/o using extra cement complete all as specified.(Note: The unit rate quoted shall be deemed to include for providing the concrete in alternate bays n exc 3 mtr long with 12 mm wide and 50 mm deep joint between the bays which shall be filled with mastic filling with hot bitumen 85/25 and 1:2 mix by volume)complete all as specified and as directed. |
| 56 | M&L for 75 mm thick cement concrete type D2, 1:4:8using 40 mm graded crushed stone aggregate as in sub base to flooringetc similar workscomplete all as specified and as directed. |
| 57 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 15 mm borecomplete all as specified. |
| 58 | S&F of Tubes, medium grade, 15mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floorscomplete all as specified and as directed. |
| 59 | Refixing of old steel tubing and connections in new or old position (wall, ceiling, floors, etc) of 15 mm borecomplete all as specified and as directed. Note : The serviceable GI tubing obtained from taking down shall be reused. |
| 60 | M & L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubingetc., and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and as directed. |
| 61 | Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 20 mm borecomplete all as specified and as directed. |
| 62 | S&F of Tubes, medium grade, 20 mm bore, galvanised, with all fittings and fixed complete to wall and ceilings or laid in floorscomplete all as specified. |
| 63 | Refixing old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.)complete all as specified. Note : The serviceable GI tubing obtained from taking down shall be reused. |
| 64 | Dismantling water tank exc 250 & n.exc 1000 ltr capacityand removing to storecomplete all as specified. |
| 65 | Supplying & fixing of PVC water storage tank 500 ltr capacity HDPE double layered , cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20 mm GI Pipe connection including locking arrangement, including supplying & fixing of Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high density plastic ball screwed for iron pipe 20 mm dia and (Minimum weight20 mm - 210 gms ) .Note :(i) GI inlet, outlet & wash out pipe will be measured paid for separately. |
| 66 | Supplying & fixing of PVC water storage tank 1000 ltr capacity HDPE double layered , cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20 mm GI Pipe connection including locking arrangement, including supplying & fixing of Ball valves high pressure of PTMT with epoxy coated Aluminum rod & high density plastic ball screwed for iron pipe 20 mm dia and (Minimum weight20 mm - 210 gms ) . Note :(i) GI inlet, outlet & wash out pipe will be measured paid for separately. |
| 67 | S & F in repair concealed stop cock CP, cast copper alloy fancy type with long shank and cup for 15mm pipe complete all as specified and as directed. |
| 68 | S & F in repairs Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm sizeincluding CP waste coupling, PVC connection 450 mm long, waste pipe & removing the existing Basin, cutting for and pinning ends of brackets or erecting stand complete all as specified and as directed. |
| 69 | S & F in repairs Vitreous China Ware Wash hand basin white, table top of size 600x400x160 mm including CP waste coupling, PVC connection 450 mm long, waste pipe & removing the existing Basin, cutting for and pinning ends of brackets or erecting stand complete all as specified and as directed. |
| 70 | Supply and Fix in repairs 15 mm bore pillar taps, swan neck type with standared size capstan head, cast Copper alloy,chromium plated, screwed down high pressure with or without lettered ‘HOT’ or ‘COLD’ long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed. |
| 71 | S&F vitreous chinasquatting pan\"Orissa\" pattern size 580x440mm white with integral foot rests(excluding flushing cistern and flush pipe) with \"P\" or \"S\" trap front or back inlet etc including connection to trap and flushing pipe and provision of cementconcrete bedding complete all as specified and as directed in repairs including demolition of existing one complete all as specified and as directed. |
| 72 | Supply & fixing in repairs vitreous china wash down water closet pedestal pattern white excluding fixing bolts, flushing cistern and flush pipe complete but including PVC seat cover with aluminum/PVC hinging devices & EWC Jet chromium plated with 1.00 mar long PVC connection pipe etc complete all as specified and as directed. |
| 73 | Supply & fixing in repair PVC low level flushing cistern 10 ltrs capacity sleek having weight not less than 1.80 KG including PVC bend, supporting brackets and complete accessories white colour complete all as specified and as directed. |
| 74 | S&F in repair Vitreous China Urinal, Half stall type, white with flush pipe,connecting pipe & waste pipe, CP urinal spreader complete all as specified. |
| 75 | S&F in repair Vitreous China Urinal partition white of size 310 x 700 mm complete all as specified and as directed. |
| 76 | S & F grating doom 125mm dia with waste hole of PTMT (min wt 40 gms) complete all as specified and as directed. |
| 77 | Taking down PVC/AC pipe of any dia & any description including all fittings complete all as specified. |
| 78 | S&F 110 mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall or laid in floors complete all as specified and as directed. |
| 79 | S&F 75 mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall or laid in floors complete all as specified and as directed. |
| 80 | S&F 110mm dia PVC SWR bends of any radius with out access door complete all as specified and as directed |
| 81 | S&F 110mm dia PVC (SWR) junction single \"T\" equal or unequal with access door Complete all as specified and as directed. |
| 82 | S&F 110mm dia PVC (SWR) branch piece, single ‘Y‘ equal or unequal Complete all as specified and as directed. |
| 83 | Demolition of reinforced concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 84 | M&L for RCC type B1 (1:2:4) using 20 mm graded aggregate in Fins, fascias, louvers, parapets, chajja/sunshade, shelves and railings , newels, balustrade & the like complete all as specified and as directed. |
| 85 | M & L for Formwork toFins, fascias, louvers, parapets, chajja/sunshade, shelves and railings , newels, balustrade & the like Fair finished surfaces of concrete flat complete all as specified and as directed. |
| 86 | M&L for Mild steel TMT bars 6mm to 10mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and as directed. |
| 87 | Taking down tarfelt with cement plaster from roof surfaces and lowering and removing the same toa distance exc. 50m and n. exc.100m including roughening ofold concrete surface of roofby wire brushing and cleaning the surface to remove all loose dust etc complete all as specified and as directed . |
| 88 | M&L for 10mm thick screed bed or bedding layer in cement mortar (1:4) mixed with WPC in order to maintain proper slope over existing roof surfaces for laying APP base polymeric membrane, finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC will be measured and paid separately. |
| 89 | M&L for providing, cement concrete type B1 1:2:4 using 20 mm graded aggregatein roof kerbs or mud stops, rounded or chamfered on edges, padding to roof etc complete all as specified and as directed. |
| 90 | M&L for water proofing treatment to RCC roof slab, includingparapet comprising with the following courses of treatment/specification from bottom to top :-(a) Applying bituminous primer @ 0.4 ltrs per Sqmover plastered surfaces of roof including parapet surface.(b)Over the priming coat laying one layer APP based polymembric membrane of approved manufacturer 3 mm thickweightnot less than 3.6 Kgs per Sqm reinforced with non woven polyester fabric weight not less than 150 gms per Sqm. Polymeric membrane shall be taken to a heightof 60cm (min) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (Note:- (i) Laying APP based polymeric membrane shall bedonetorch on method or as per manufacturer\"s instructions.(ii)A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturer\"s instruction. (iii) Applying two coats of Aluminum paint over APP membrane.) (iv) Cutting groove in brick wall 75 mm wide and 65 mm deep and shopping horizontal face of groove with cement mortar 1:3 |
| 91 | M & for water proofing treatment to sunken floor with the following course of treatment/ specification:(i) Cleaning top surface of floors /slabs and laying 50 mm thick (avg) PCC of grade M10 (Nominal mix) , mixed with WPC as per manufacturer\"s instruction laid in slope 1:20 towards spouts including coveting corners(ii) 15 mm thick plastering in CM (1:4) on sides mixed with WPC as pe remanufacturer\"s instruction. (iii) Applying 1st layer of slurry @ 0.488 kg / sqm mixed with acrylic based polymer modified cementious compound @ 0.253 kg /sqm This layer shall be allowed to air cured for 4 hrs . (iv) applying 2nd layer of slurry @ 0.242 kg/sqm mixed with acrylic based polymer modified cement nous compound @ 0.126 kg/sqm. This layer shall be allowed to air cured for 4hrs followed with water curing for 48 hrs.(v) Applying a coat of industrial bitumen 85/25 penetration @ 1.50 kg/sqm on plastered and concrete surfaces (vi) Providing 150 micron thick polyurethane paint in two coats (each of 75 micron measured dry on dry surface over a coat of PU primer including preparation .(Make of PU primer - Dek guard EP -302 of M/S Fosroc or equivalent approved brand.Make of PU paint - Dek guard PUor equivalent approved brand. (vii) 2 Nos 32mm bore GI medium grade 450mm long spout ,to be provided through external wall to drain out accumulated water.(vii)Sunken floor shall be tested for water tightness by filling water for 72 hrs before and after treatment work is carried out and ensure that no leakage /seepage exists (ix) Sunken portion shall be filled with lean concrete of grade M7.5 stone aggregate. |
| 92 | S&F Powder coatedaluminum window sliding type three track (2 glazed & one gauze shutter ) aluminum sections weighing not less than 1.67kg/m for frame and 0.55 kg/m for shutter including necessary jointing cleats, glazingcleats, rubber packing , screws, handle, locking arrangement and 5.5mm thick plain/tinted glass and aluminum mosquito proof gauge including taking down of old existing steel window and making good disturbed surface of wall complete all as specified and as directed. |
| 93 | S&F powder coated anodized aluminum door made out hollow extruded aluminum sections as mentioned below. Each door having 02 Nos disk or D type handles of 200mm long, 02 Nos aluminum tower bolt of 200mm size, 1 no mortise lock of six levers with key in duplicate regulated by double action hydraulic floor door spring (Make Sandhu /Titz ) shutter to be paterly glazed with 5mm thick tinned glass and partly paneled with 12mm thick prelaminated particle board fixed with glazing clips rubber beading /gasket anodized aluminium beading screws complete including taking down old unserviceable shutter with frame complete all as specified and as directed. (a) Chowakat frame : 100 x44 x1.60 mm(b) Shutter vertical style : 100 x44 x1.60 mm(c) Shutter lock rail : 150 x44 x1.60 mm(d) ShutterTop rail : 100 x44 x1.60 mm(e) Shutter bottom rail :200 x44 x1.60 mm |
| 94 | Taking down Wall paneling and similar work as specified as directed. |
| 95 | S&F Solid PVC Wall Lining consisting of 5mm thick Single Side Prelamcolour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specificationsand drawing complete all as specified and as directed. |
| 96 | S&F 5mm thick PVC sheet fillet of width35mm for wall paneling inclusive offixing on to wall to make PVC Frame as per specification and drawing complete all as specified and as directed. |
| 97 | Demolition of wall and ceiling board (Fibre,pulp,insulation etc.) or insulation board /slab/blankets any thickness including cover fillet complete all as specified and as directed. |
| 98 | Supply & fixing false ceiling with Gl powder coated frame work and 4 mm thick,(E-board) non asbestos fiber reinforced cement board, reinforced design board tiles conforming to IS-14862,of approved texture at aii height duly suspended ceiling laid on hot dip galvanised iron imposed grid of size 600 mm x600 mm ,T section/ Angle section including cutting holes in brick wall and making good surface with cement concrete 1:2:4 type B-0/1:3 cement mortar complete all as specified and having following details. (a) 27mm x 27mmangle 0.55 mm thickness, I powder coated hot dip glvanised plugged at the rate 600mm centre to center along with te perimeter of wall.(b) 25 mmx 25 mm Tee 0.55 mm thickness,GI powder coated hot dip galvanised as main and cross runner suspended with 1.6 mm dia GI wire suspenders (not exc 1.2 mtr length) with adjustable clamps and dash true fasteners plugged in RCC slab or angle iron runner of slopped roof placed at therate 600 mm centre to centre along with the perimeter of wall.Note : The work shall be carried out as per manufacturer instruction and as directed. |
| 99 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coveringscomplete all as specified and as directed. |
| 100 | M&L for Rolled Mild steel as in Roof trusses (framed), trussed, purlins,rafter, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, tubular or flat sections) including distance pieces, cleats, plate etc. complete all as specified and as directed. |
| 101 | M &L for Rolled mild steel Fe 410 in: postJoist, channel, angle, tubular section or tee sections, fixed independently, without connecting plates, etc. complete all as specified and directed. |
| 102 | S&F forPre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 103 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof, to wall,ridges fixed with self tapping screws as specified. |
| 104 | Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit includingremovalof batten/ conduit/ gutties/ wooden boards/ switches/ sockets/ regulators/ light fittings etc and seperating the serviceable items like fan regulators and light fittings for re-use under respective items and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified and as directed. |
| 105 | Taking down carefully existing old/unsv sub main wiring of any size/descripption as existing at the site including making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified and as directed. |
| 106 | M&L for consealed conduit point wiring with 1.5 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core copper cable working voltage 1100 volts grade conforming to IS-694 with stranded copper conductor in and including PVC conduit of adequate size with allaccessories (including cutting chases & making good the disturbed surface to its original specification) including MS sunk box, 3mm thick hylum sheet top cover fixed by means of brass machine screw and cap washer including size 1.5 sq mm (nominal cross sectional area) PVC insulated unsheathed single core multistranded copper conductor cable as earth continuity conductor connected to main switches/DB\"s or common earth dolly complete all as specified and directedfor one Light point controlled by one, one way switch |
| 107 | Description all as per item No 3 here in before butfor one Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator |
| 108 | Description all as per item No 3 here in before but for one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 109 | Description all as per item No 3 here in before butfor one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board . |
| 110 | Description all as per item No 3 here in before but for one bell point controlled by one, bell switch 5 Amps |
| 111 | Description all as per item No 3 here in before but for one light point controlled by one, two way switch 5 Amps |
| 112 | Description all as per item No 3 here in before butusing 2.5 sq mm single core copper conductor cable of multistranded flame retardant PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point incl running of2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 113 | S & F switch piano single pole flush type 5 amps, 230 volts one way complete all as specified and as directed. |
| 114 | S & F bell push flush type 5 amps, 230 volts.complete all as specified and as directed. |
| 115 | S & F switch piano single pole flush type, two way, 5 amps, 230 volts.complete all as specified and as directed. |
| 116 | S & Fsocketflush type multipurpose 2/3 pin 5 amps 2 in 1, 230 Volts all as specified and as directed. |
| 117 | S & F switch socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1230 Volts complete all as specified and as directed. |
| 118 | S & F switch socket combination 2 in 1 multipurpose 3/5 pin 5/15 amps flush type complete all as specified and as directed. |
| 119 | S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and as directed. |
| 120 | S & F ceiling fan regulator step type, flush type heavy duty suitable to work on 230 volts Ac supply complete all as specified and as directed. |
| 121 | S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with PVC round/squareblockscomplete all as specified and as directed. |
| 122 | S&F in replacement Sheet metal enclosure for 4 way Distribution Boards (DB’s), double door, Triple pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB\"S/lsolators complete with and including taking down old unsv one all as specified and directed incl taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified and as directed. |
| 123 | S&F in replacementSheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB\"S/lsolators complete with and including taking down old unsv one all as specified and directed incl taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified and as directed. |
| 124 | S & F in replacement MCB TPN 415 volts suitable for fixing in MCB DB of capacity 63 amps complete all as specified and as directed. |
| 125 | S & F in replacement MCBSPN230volts suitable for fixing on MCB DB of capacity 32 to 63Ampscomplete all as specified and as directed. |
| 126 | S & F in replacement MCB SP 6 to 30 Amps 240 volts for fixing on MCB DB\"sall as specified and as directed. |
| 127 | M&L for sub main wiring with 2 run of 6.00 sqmm (nominal cross-sectional area) PVC insulated unsheathed single core FRLS cable of working voltage 1100 volts gradewith stranded copper conductor includingone run of 6.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in PVC rigid non- metallic conduit with andtaking down the existing unservicable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified. complete all as specified and as directed. (NOTE :(i)PVC non rigid nonmetallic conduit shall be measured & paid separately under relevant item of this Schedule ‘A’.(ii)Two run of submain wiring cable alongwith one run of earth wire with and including 25 PVC conduit pipe shall be measured as one unit length). |
| 128 | All as per item No above but usingtwo run 4.0 Sqmm multistranded copper conductor single core cable with one run 4.00 sqmm multistranded copper conductor single core cable as earth wire complete all as specified and as directed. |
| 129 | S&F in replacement IP 20, class I, LED light 1X18 W (or nearest next higher wattage) (4feet), 5700K, wall/ surface mounted, integrated type with aluminium housing and decorative and caps with integrated high efficiency electronic driver and surge suppressor of 2KV or more, luminaire efficiency > 95 lumens/watt, power factor > 0.90, operating range - 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/ square blocks, screws etc complete with all accessories internally prewired and connecting up with and including necessary taking down the old unserviceable fitting complete all as specified and as directed. |
| 130 | S & F in replacement Inverter LED batten 20W with square profile and polycarbonate channel, lithium Ion battery with charging time 8 Hours-10 Hours and backup time upto 4 Hours with driver, holder including LED tube light connecting up with three core flexible copper conductorcable of suitable size from ceiling rose complete all as specified and as directed. |
| 131 | S & F in replacement Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape complete incl removal of old unsv fitting all as directed by Engineer-in-Charge. |
| 132 | S&F in replacement IP 20, Class I, LED Mirror light fitting 1 x 10 W, (or nearest next higher wattage) 5700 K, wall /Surface mounted with aluminium housing 2 feet long, integrated type, with high efficiency PMMA diffuser,integrated high efficiency electronic driver & surge suppressor of 2 KV or more, luminaire efficacy > 95 lumens/Watt, power factor >/ 0.90, operating range – 140 to 270 V, 50 Hz fixed with 02 Nos of PVC round/square blocks, screws etc complete including 01 No 10 W LED lamp with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size including necessary taking down the old unserviceable fitting complete all as specified and as directed. |
| 133 | S&F in replacementhylam sheet 3 mm thick white in colour of size 130 mm x 180 mm including taking down existing unserviceable complete all as specified and as directed. |
| 134 | S&F in replacement hylam sheet 3 mm thick white in colour of size 120 mm x 170 mm including taking down existing unserviceable complete all as specified and as directed. |
| 135 | S&F in replacent hylam sheet 3 mm thick white in colour of size 230 mm x 280 mm including taking down existing unserviceable complete all as specified and as directed. |
| 136 | S&F in replacement hylam sheet 3 mm thick white in colour round type of size 80 mm dia including taking down existing unserviceable complete all as specified and as directed. |
| 137 | M&L for Earthing complete with galvanised steel earth plate electrode 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below the ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth strip 32x6mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or of steel all as shown in electrical plate No 3 of SSR part-I2009 connected to down Conductor all as specified and testing on completion including. Necessary excavation, earthwork, PCC works and CI earth pit cover with watering pipe 20mm dia GI pipe medium grade, funnel with wire mesh and lugs and GI pipe 40 mm dia of light grade,for protection of earth stripcomplete all as specified and directed. Note: Excavation/PCC/Earth work/Charcoal/ Salt shall be deemed to be include in this unit rate. |
