|
| 1 | Schedule-A |
| 2 | M&L for preparation of old plastered or unplastered surfaces of walls including removal of old wall paper by vaccum based sanding machine all as specified, removal of nails etc and filling cracks/ hole by applying wall care putty (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying one coat oil bound distemper white or colured by smart periodical methodology/ auto roller, complete all as specified and directed by Engr-in-Charge. |
| 3 | M&L for preparation of plastered or unplastered decorated surfaces on ceiling by vaccum based sanding machine all as specified, removal of nails etc and filling cracks/ hole by applying wall care putty (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying one coat oil bound distemper white or colured by smart periodical methodology/ auto roller, complete all as specified and directed by Engr-in-Charge. |
| 4 | M&L for preparation of old plastered or unplastered surfaces of ceiling and cornices spoiled by smoke soot, moulds, mass and efflorescence salts and trading oil and greasy spots by scraping, washing with water, filling cracks/ hole and applying two coat of white wash, complete in all respect as specified and directed by Engr-in-Charge. |
| 5 | M&L for comlpete removal of existing treatment from old decorated plastered surfaces of walls including removal of old wall paper by vaccum based sanding machine complete all as specified, removal of nails etc and filling cracks/ hole with putty, applying wall care putty upto 1 mm thick as required (multipurpose mixer shall be used for uniform adn proper mixing of putty) and applying two coats of oil bound distemper white or coloured over a coat of approved primer by using smart periodical methodology/ auto roller, complete all as specified and directed by Engr-in-charge. |
| 6 | M&L for comlpete removal of existing treatment from old decorated plastered surfaces on ceilings by vaccum based sanding machine complete all as specified, removal of nails etc and filling cracks/ hole with putty, applying wall care putty upto 1 mm thick as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of oil bound distemper white or coloured over a coat of approved primer by using smart periodical methodology/ auto roller, complete all as specified and directed by Engr-in-charge. |
| 7 | M&L for for preparation of old plastered or unplastered decoracted surfaces of wall including removal of old wall paper, pillasters, cornices etc and applying one coat of exterior emulsion all weather paint 100% acrilic smooth exterior paint @ 0.90 Ltr/ 10 Sqm, coloured as approved by GE, including filling all the holes and making uniform smooth surface at any height by using smart periodical methodology/ auto roller, complete all as specified and directed by Engr-in-Charge. |
| 8 | M&L for complete removalof existingtreatment from old decorated plasterred surfaces of walls including removal of old wall paper by vaccum based sanding machine complete all as specified, removal of nails etc and filling cracks/ hole with applying wall care putty upto 1 mm thick as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of exterior emulsion all weather paint 100% acrilic smooth exterior paint @ 1.67 Ltr/ 10 Sqm, colour as approved by GE, over & including a coat of approved primer by using smart periodical methodology/ auto roller, complete all as specified and directed by Engr-in-Charge. |
| 9 | M&L for preparation of old plastered or unplastered decoracted surfaces of wall including removal of old wall paper, pillasters, cornices etc and applying one coat of plastic emulsion paint, coloured as approved by GE, including filling all the holes/ cracks with wall care putty upto 1 mm thick as required and making uniform smooth surface at any height by using smart periodical methodology/ auto roller, complete all as specified and directed by Engr-in-Charge. |
| 10 | M&L for complete removalof existingtreatment from old decorated plasterred surfaces of walls including removal of old wall paper by vaccum based sanding machine complete all as specified, removal of nails etc and filling cracks/ hole with wall care putty upto 1 mm thick as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of plastic emulsion paint, colour as approved by GE, over & including a coat of approved primer by using smart periodical methodology/ auto roller, complete all as specified and directed by Engr-in-Charge. |
| 11 | M&L for preparation of old plastered or unplastered decorated surfaces of walls including removal of old wall paper, chajjas, soffits of chajja, slab projection and cornices spoiled by smole soot, moulds, moss and efflorescence salts and trading oil and greasy spots by scraping with vaccum based sanding machine, washing with water all as specified, filling cracks/ hole with wall care putty and applying one coat of cement base paint by smart periodical methodology/ auto roller, complete in all respect as specified and directed by Engr-in-charge. |
| 12 | M&L for preparation of old decorated wood and wood based surface of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint, complete in all respect as specified and directed by Engr-in-Charge. |
| 13 | M&L for preparation of old decorated steel and steel based surfce of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint, complete in all respect as specified and directed by Engr-in-Charge. |
| 14 | M&L for preparation of old decoracted concrete surface and applying one coat of synthetic enamel paint on old plastered surface in different colours such as PCC Kerb stones, footpath, brick, concrete surface etc, complete in all respect as specified and directed by Engr-in-Charge. |
| 15 | M&L for including preparation of surface of wallfor writing/ rewrriting letters or figures at Buildings or boards (Block. Roman, Italic or Indian) in synthetic enamel paint, not exc. 30 cm high etc, complete in all respect as specified and directed by Engr-in-Charge. |
| 16 | M&L preparation of old painted wooden surfces over 10 cm width or girth and applying one coat of varnish finishing filling all holes with wood based materials and making good, complete in all respect as specified and directed Engr-in-charge. |
| 17 | M&L for providing and applying Pidilite Dr fixit Pidifin 2K/Pidilite Dr Fixit Fastflex/ Fosroc Brushbondwhich is two-component, acrylic polymer-modified cementitious waterproofing coating, in two coats over prepared concrete/masonry surface including surface cleaning, wetting, mixing as per manufacturer’s specification, and curing to ensure seamless waterproofing protection. Measurement shall be in square meters of finished waterproofed surface. |
| 18 | M&L for providing and applying URP 301, a polymer-based bonding and waterproofing agent, mixed with cement in specified ratio and applied in two coats over cleaned and pre-wetted concrete/masonry surfaces as per manufacturer’s specifications, including surface preparation and curing. Measurement shall be in square meters of finished treated surface.Make : Pidilite Dr Fixit/ Fosroc/Sika |
| 19 | Taking down cement mortar plaster on brick or stone wall or concrete surfaces etc, including raking out joints, hacking for key, scrubbing down with water etc, complete allas specified and directed. |
| 20 | M&L for 15 mm thick rendering in cm(1:4) in two layers with backing coat 10 mm thick and second coat 5 mm thick on fare face of brick/stone/concrete surfaces and finished the surface even & smooth without using extra cement mixed with WPC (WPC Will be measured and paid seperately), complete all as specified and directed by Engr-in-charge. |
| 21 | M&L for 15 mm thick rendering in cm(1:6) in two layers with backing coat 10 mm thick and second coat 5 mm thick on other than fare face of brick/stone/concrete surfaces and finished the surface even & smooth without using extra cement mixed with WPC (WPC Will be measured and paid seperately), complete all as specified and directed by Engr-in-charge. |
| 22 | M&L for 5 mm thick rendering in cm (1:3) on brick/stone/concrete surfaces of ceilingfinished the surface even & smooth without using extra cement, complete all as specified and directed by Engr-in-Charge. |
| 23 | M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand mixed with Liquid WPC) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 white cement: 1/2 coarse sand: 2 stone chipping 6mm t0 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately) |
| 24 | M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove, complete all as specified and directed by Engineer-in-charge. |
| 25 | Supply only integral water proofing compound (make: Dr Fixit/Pidilite/fosroc)or equivalent) |
| 26 | M&L for new plasterred surfaces of walls and applying two coats of exterior emulsion anti fungal paint 100% acrilic smooth exterior paint @ 1.67 Ltr/ 10 Sqm, over one coat of primer includingwall care putty upto 2 mm thick as required (multipurpose mixer shall be used for uniform adn proper mixing of putty) colour as approved by GE, by using smart periodical methodology/ auto roller, complete all as specified and directed by Engr-in-Charge. |
| 27 | M&L for preparation of newly plastered surfaces of wall, and applying two coat of Oil bound distemper white or colour, over one coat of primer including wall care putty upto 2 mm thick as required (multipurpose mixer shall be used for uniform adn proper mixing of putty)by using smart periodical methodology/ auto roller, complete all as specified and directed by Engr-in-charge. |
| 28 | M&L for preparation of newly plastered surfaces of Ceiling, and applying two coat of Oil bound distemper white or colour, over one coat of primer including wall care putty upto 2 mm thick as required (multipurpose mixer shall be used for uniform adn proper mixing of putty)by using smart periodical methodology/ auto roller, complete all as specified and directed by Engr-in-charge. |
| 29 | M&L for Removing of vegitation growth cutting of shrubs plant or tree of girth not exc 30 cm incl roots from wall and roof of bldg,mouth of rain/waste water pipe for building height upto 15 mtr including necessary scaffolding works, cutting of wall/roof etc to remove complete root of vegetations and applying chemical blue vitriol at the root of vegetation and making good the damaged portion with CM 1:3 or PCC 1:2:4 & two coats of cement base paint etc complete all as specified and directed by Engr-in-charge. |
| 30 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises from MoD land, complete all as specified and directed BY Engr-in-charge. |
| 31 | M&L for coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed by Engr-in-charge. |
| 32 | M&L for coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed by Engr-in-Charge. |
| 33 | M&L for glazed ceramic colour tiles of of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in coloured cement on vertical surfaces such as in dado/skirting etc over and including 10 mm thick backing coat in CM 1:4, complete all as specified and directed by Engr-in-charge. |
| 34 | M&L for coloured printed vitrified ceramic tiles, light shade 9-11 mm thick in floor, area of tile not exc 0.36 sqm each set and jointed in neat cement slurry and pointed with white cement with pigment to match the shade of tile over and including 15 mm thick screed bed in CM 1:6, complete all as specified and directed by Engr-in-Charge. |
| 35 | M&L for 18 to 20 mm granite slab of any size for service counter and platform over and including 15 mm thick screed bed or bedding layer ofcement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including making good the edges complete all as specified and directed by Engr-in-charge. |
| 36 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thick (below or above ground level) complete all as specified and directed. |
| 37 | M&L for 50 mm thick PCC 1:2:4Type B0 (12.5 mm Graded Stone Aggregate) as in sub flooretc., including rough top surface to receive floor finish complete all as specified and as directed. |
| 38 | Removal of demilished materials/ debris/ malwa to a distance exc 1.5 Km but n exc 05 Km and depositing out side the MD land and as directed by Engr-in-charge. |
| 39 | M&L for preparation of old/ untreated walls (washing, rubbing down and stopping of distempered and painted surfaces) and finishing walls with textured exterior paint of required shade, granular finish; New work (two or more coats applied @ 3.28 Ltr/ 10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm over 1 mm thick putty over plastered surface to prepare the surface even and smooth complete all as specified and directed. Note:- shade as approved by GE. |
| 40 | S&F of Oil-resistant, Re-positionalble and Eco-friendly strain resistance colour wall paper including fixing with adhesive and cutting to required shape complete in all respect to the satisfaction of Engr-in-charge and also adhere to below specifications:-(a) All wall paper to be erected from floor to the bottom of the ceiling or as specified.(b) All opening for the cutout for ducting/ raceways/ cables etc, in the partition to be closed and made air tight.(c) Disposing waste material from the site. |
| 41 | S&F vanishing roller/ vertical blinds as required for windows/ door/ ventilator of any colour and pattern with exc 1.5 sqm but not exc 4.00 sqm each, as approved by Engr-in-Charge including connected items i.e. rod, hooks etc with complete fittings, complete all as specified and directed by Engr-in-charge. |
| 42 | S&F in repair HDHMR board luxury bathroom vanity washbasin cabinet with mirror floor/ wall mounted, mouveable or fixed with drayers as per site requirement with 32 mm dia brass chromium plated waste fitting including granite stone thickness 18-20 mm of desired colour and fancy type CP WHB mixer and all fittings as required at site for smooth functioning, making good disturbed surfaces in cement mortar 1:3 and fixed, complete all as specified and directed by Engr-in-Charge. |
| 43 | S&F, jointing and testing galvanized steel water tubing 15 mm bore (dia) (ISI Marked), medium grade with all fittings such as bends, elbow, socket, reducer etc and fixed to wall with concealed pipe work, ceiling or laid in floors or any other situation including taking up or down existing steel tubing/ PPR pipe of any grade and connection includings making good the disturbed surfaces, complete all as specified and directed by Engr-in-charge. |
| 44 | S&F, jointing and testing galvanized steel water tubing 20 mm bore (dia) (ISI Marked), medium grade with all fittings such as bends, elbow, socket, reducer etc and fixed to wall with concealed pipe work, ceiling or laid in floors or any other situation including taking up or down existing steel tubing/ CPVC pipe of any grade and connection includings making good the disturbed surfaces, complete all as specified and directed by Engr-in-charge. |
| 45 | S&F in repair 15 mm dia bore CP Bib cock, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for union and fixed complete all as specified and directed by Engr-in-charge. |
| 46 | S&F in repair 15 mm dia bore CP two in one bib cock, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipes or for union and fixed complete all as specified and directed by Engr-in-charge. |
| 47 | S&F in repair of Wall mixture of telephonic 15mm bore dia cast copper alloy with chromium plated screwed down high pressure with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly buts screwed for iron pipe complete all as specified and directed by Engr-in-charge.Make - Hindware, cera, Parryware, Marc |
| 48 | S&F in repair sink mixer of 15mm dia telephonic type mixer cast copper alloy fancy type chromium plated crutch and butter fly handle screwed down complete all as specified and directed by Engr-in-Charge.Make: Hindware, Cera, Parryware, Marc |
| 49 | S&F in repair basin mixer of 15mm dia cast copper alloy fancy type chromium plated crutch and butter fly handle screwed down complete all as specified and directed by Engr-in-Charge. Make: Hindware, Cera, Parryware, Marc |
| 50 | S&F in repair, 15 mm dia bore swan neck pillar taps cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered ‘Hot’ or “cold’ with long screwed shank and fly nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-charge. |
| 51 | S&F in repair 125 mm fancy type shower rose brass chromium plated with CP arms of 30 to 60 cm long for 15mm bore GI pipe complete all as specified and directed by Engr-in-charge. |
| 52 | S&F in repair of 15mm dia telephonic hand shower of long 200 mm to 300 mmcast copper alloy fancy typescrewed down complete all as specified and directed by Engr-in-Charge.Make: Cera/ Marc/ Hindware |
| 53 | S&F in repairs 15 mm dia bore cast copper alloy chromium plated fancy type angle cock with long shank & cup complete all as specified and directed by Engr-in-charge. |
| 54 | S&F in repair Health Faucet with 1.00 mtr long SS tube and stand/ hook, complete all as specified and directed by Engr-in-charge.Make : Cera, Hindware, Parryware, Marc |
| 55 | S&F in repair vitreous china squatting pan “Orissa pattern” of size 580mmx440mm ‘white’ with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe anti syphonage pipe etc necessary concrete bedding and making good the disturbed surfaces complete all as specified and directed by Engr-in-charge. |
| 56 | S&F in repair vitreous china wash down water closet pan (pedestal pattern)or white (excluding flushing cistern and flush pipe) including connection to drain or outgoing pipe and flush pipe anti syphonage pipe etc and making good the disturbed surfaces of floor complete all as specified and directed by Engr-in-charge. |
| 57 | S&F in repairs 10 ltrs capacity PVC low level flushing cistern white with inlet, float valve and handle including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and directed by Engr-in-charge. |
| 58 | S&F in repair water closet seat cover white colour closed pattern with flat bottom covered and mild steel chromium plated hinging device complete all as specified and directed by Engr-in-charge. |
| 59 | S&F in repairvitreous china wash basin, white, flat back ofsize 550 mm x 400 mm fixed over cast iron cantilever brackets of32 mm dia, brass waste coupling and including fixing of tap, waste fitting and union complete all as specified and directed by Engr-in-charge.Note : Pillar tap only shall be measured separately under respective item in this schedule and balance all shall include in the quoted rate.. |
| 60 | S&F in repair PVC connection 15 mm dia and 450 mm long with both end brass fly nutcomplete all as specified and directed by Engr-in-charge. |
| 61 | S&F in repair of floor /wallmounted western toilet/commode S/P trap square type seat in built in single pices white water closet (EWC) including complete all fittings cmplete all as spd and directed by EIC Make:Linum Ceramic/Cera/Hindware |
| 62 | M&L for PVC (SWR) nahani trap of 75 mm diameter of outlet, with PVC 150x150 mm size openable at center, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete in all respect as specified and directed. |
| 63 | S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with adhesive joint laid in trenches or in floor including taking down the existing unserviceable pipe complete all as specified and directed by Engr-in-charge. |
| 64 | S&F in repair 75/ 63 mm bore PVC (SWR) pipes single socketed in any length with adhesive joint laid in trenches or in floor including taking down the existing unserviceable pipe complete all as specified and directed by Engr-in-charge. |
| 65 | S&F in repair 110 mm bore dia PVC bend, complete all as specified and directed by Engr-in-charge. |
| 66 | S&F in repair 75/ 63 mm bore dia PVC bend, complete all as specified and directed by Engr-in-charge. |
| 67 | S&F in repair 110 mm bore dia PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all specified and directed by Engr-in-charge. |
| 68 | S&F in repair 75/ 63 mm bore dia PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all specified and directed by Engr-in-charge. |
| 69 | S&F in repair PVC cabinet mirror of size 432 mm x 311 mm of selected quality glass, mounted in PVC frame and fixed to PVC plugs with chromium plated screws and properly hanged in the slot at least 02 Nos on back complete all as directed by Engr-in-charge. |
| 70 | S&F in repair bevailed frameless wall mounted mirror colour of silver B fixed with wall bolting arangement of size 600 x 900 mm of good finish, complete all as specified and directed by Engr-in-Charge. |
| 71 | S&F in repair toilet paper holder of size 13 cm x 13 cm x 7 cm chromium plated of glossy finish fixed to wall with chromium plated brass screw complete all as specified and directed by Engr-in-charge. |
| 72 | S&F in repair Soap dish of brass chromium plated of oval shape of cost not less tha Rs 150.00 fixed to wall with brass chromium plated screws complete all as specified and directed by Engr-in-charge. |
| 73 | S&F in repair, corner glass shelf of 300 mm long fixed on the wall with nuts & washers, complete all as specified and directed by Engr-in-charge. |
| 74 | S&F in repair, glass shelf 450 mm long on wall with screws and making good surface of wall, complete all as specified and directed by Engr-in-charge. |
| 75 | Providing and fixing in position HDHMR cup board box type as per design and directed of 550-600 mm deep, fixed over wall with PVC gittie and screws/ or in beneath of kitchen counter, cup board, kitchen cabinet in required sizes as per site made out of 17-18 mm thick one side decorative lamination and other side balancing lamination sheet consisting of carcass 17-18 mm thick sheet. Provision of shelves, shutters, back side, top, bottom, side, made out of 17-18 mm thick one side decorative laminated sheet , all required brackets, screws etc,. The panel shall be fabricated using adhesives and screws whereever required. All the edges shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent finish as per maufactures specifications and drawing including 15mmX20mm medium grade chrome finish two nos per leaf, slip on cabinet hinge/ self-closing hinge, soft close hydraulic 4 hole cabinet auto cup hinge full overlay O crank with soft closing of make Godrej/ Avis L Bihari/ Hettich/ Harrison and 50 mm SS handle size all items each per shutter including taking down of existing box complete in all respect as specified and directed. Make: Rajshri Plastiwood, Sintex or of appd make. (Note: For payment, measurement shall be taken as front portion of cup board measurement only, rest other items/ materials as specified shall not be measured or paid as these are included in this item). |
| 76 | Note :- 1. The preparation and painting work shall be executed by authorized applicator of paint manufacturer only.2. Contractor shall submit the MOU letter from paint manufacturer within 15 days from commencement of work.3. Contractor shall procure the paint after approval of make from GE in three equal parts, 1st part within 15 days of commancement and rest 2nd parts at equal intervals or earlier if required and to be kept in users costudy under intimation to Engr-in-charge as per HQ CESC policy letter No210007/131/155/E2 (Wks) Army dated 26 Apr 2020 on periodical services.4. Periodical work shall be completed with in 7 days after handover of key of new allotted qtrs, in case of delay panality @ Rs 1000/- per day per qtrs. 5. Necessary cleaning of painting/distemper marks from floor, doors, window, cleaning of furniture and window panes, pelmet box, Pelmet box/Drapery rod is deemed to be inclusive of rate quoted by the contractor. Non cleaning of floor shall be recovered @ Rs 1000/- per qtr for the same.6. Contractor shall procure/brought to site the sanding machine, auto roller, paint mixing machine and other specified T&P within 15 days from the date of commancement.7. Electric meter during welcome maintenance will be born by contractor at the rate as specified in CA, initial and final meter reading shall be recorded in handing taking notes. 8. work will be strictly executed by mechinised means/ tools (spray machine) as required for smart periodical services. In case where work by mechinised means / tools is not feasiable then work can be carried out through auto roller or any other mean (As directed) after obtaining direction from Engineer-in-Charge. |
| 77 | Note:- The amount of Rs38440.00against Schedule of Crediton Srl Page145 shall be deducted from the total amount quoted against Sch \"A\" |
