Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-02-2026 | BOQCorrigendum | BOQ | 02-03-2026 |
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), including disposing off the retrieved debris outside the premises, complete all as specified and as directed. |
| 2 | Roughening surfaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust etc and brushingneat cement slury with 3kg/sqm, complete all as specified and as directed.. |
| 3 | M& L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) of approved size, area of eachtile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed inwhite cement mixed with pigments to match with the shade of tiles, over and including 15mm thick screed bed in CM (1:6), complete all as specified and as directed. |
| 4 | M& L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) of approved size, area of eachtile exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical Surface etc. set and jointed in neat cement slurry and pointed inwhite cement mixed with pigments to match with the shade of tiles, over and including 10mm thick screed bed in CM (1:3), complete all as specified and as directed. |
| 5 | M& L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) of approved size, area of eachtile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed inwhite cement mixed with pigments to match with the shade of tiles, over and including 15mm thick screed bed in CM (1:6), complete all as specified and as directed. |
| 6 | M&L for coloured Glazed ceramic tiles of size 300mmx 450mm , 6 to 7 mm thick on the vertical surfaces such as in skirting / dado etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with the shade of the tiles, over and including 10mm thick cement mortal backing coat in CM (1:4), complete all as specified andand as directed. |
| 7 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any morter complete all as specified and as directed. |
| 8 | M&L for granite (of any type)18-20mm thick (Table rubbled andmirror polished ) insteps, jambs, pillars, window-cills, cooking platform etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 20mm thick screed bed in CM (1:6),complete all as specified and directed. |
| 9 | M&L for 20 to 25mm thick Machine cut kota stone slabsas in flooring, laid over and including 20mm thick screed in cm (1:6), set, jointed and pointed in neat cement slurry mixed with pigment to match with the shade of the slabs, including rubbing and mirror polishing etc, complete all as specified and as directed.. |
| 10 | M&L for 20 to 25mm thick Machine cut kota stone slabsas in riser of step, skirting, dado etc. laid over and including 10mm thick backing layerin cm (1:4), set, jointed and pointed in neat cement slurry mixed with pigment to match with the shade of the slabs, including rubbing and mirror polishing etc, complete all as specified and as directed . |
| 11 | Taking down chowkats or frames with Wooden/PVC/Flush shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc,disposing off the retrieved debris outsite the premises, complete all as specified and as directed. |
| 12 | Taking down chowkats or frames with Wooden/PVC/Flush shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc,disposing off the debris outsite the premises, complete all as specified and as directed. |
| 13 | Taking down shutterof any description area exc 1.00 sqm but n exc 2.00 sqm each and removing from site complete all as specified and as directed. |
| 14 | S&F factory made 1.25 mm thick pressed steel frame of size 165 X 60 mm for doors with one or more rebates including necessary provision of lugs, locks strike plate, hinges etc, applying one shop coat of Zinc Chromate primer after preparation of the surfaces,complete all as specified and as directed. |
| 15 | S&F factory made 1.25 mm thick pressed steel frame of size 105 X 60 mm for doors with one or more rebates including necessary provision of lugs, locks strike plate, hinges etc, applying one shop coat of Zinc Chromate primer after preparation of the surfaces,complete all as specified and as directed. |
| 16 | M&L forcement concrete (1:3:6) type C-1 (using 12.5mm graded crushed stone aggregate)as in coping, bed block for filling hollow space of steel chowkhats, fixing of hold fast, kneelers, apex stones bed plates,water troughs and the like including weathering, slightly rounded or chamfered angles & throating as including form work as requriedcomplete all as specified and as directed. |
| 17 | S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawingand as directed.Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life |
| 18 | S&F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & show on drawing for SI NO 8101 on Sr. Page No181 of SSR Part -IIand as directed. |
| 19 | S&FFactory made 35mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed. |
| 20 | M&L for 2nd class hard wood (Hollock/Kalasiris/Brjsal/Gamari) (kiln seasoned and chemically pressure treated) 35 mm thick glazed and skeleton shutters,open rebated and prepared to rceieve glass, gauze, etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, sizes of members of shutters as specified in SSR Part-1, Section 8, clause 8.24 (a), complete all as specified and as directed. |
| 21 | Dismantling timber scantlings ( framed works) 40 sq. cm and over in section, in any position, complete all as specified and as directed |
| 22 | M & L for 2nd classhardwood in plain, solid, straight chowkats and frams wrought, framed rebated onnthe solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed. |
| 23 | S & F for 25mm thick factory made flush shutters, solid core construction with block board core playwood face panels, commercial type on both sides kiln seasoned and chemically pressure treated with anti termite complete all as specified andand as directed. |
| 24 | M&L for the Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165, complete all as specified and as directed. |
| 25 | S & Faluminium powder coatedframe for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified complete all as specified and directed.Notes:- (i) Weight ofAluminium sections as per actual or as per IS or as per manufacturer, whichever is less, shall only be considered for payment. (ii) The accessories (including Aluminium mongries etc) required to be provided for windows, vents and doors as per directions of Engineer-in-charge shall be provided but weight for the same shall not be considered.(iii) Cost of all the items,accessories & Aluminium mongries required for the entire completion of the work shall be deemed to be included in the quoted rate.However glass panes, wire cloth shall be measured and paid separately under respective items |
| 26 | S & F aluminium powder coated (minimum thickness of powder coating 50 micron)for shutter of doors, windows, ventilators, partitions with extruded built up standard tubular sectiond/appropriate Z sections and other sectionsapproved make conforming to IS:1285 fixing with dash fastners of required dia and size includig necessary filling up the gaps at junctions i.e at top, bottom and sides requried EPDM rubber/neoprene filling up the gaps at junction with one or more rebates including joining cleat for fixing etc. aluminium sections shell be smooth, rust free ,straight, mitred and jointed mechanically wherver required includingbeading gor glazing/paneling complete all as specified complete all as specified and directed.Notes:- (i) Weight ofAluminium sections as per actual or as per IS or as per manufacturer, whichever is less, shall only be considered for payment. (ii) The accessories (including Aluminium mongries etc) required to be provided for windows, vents and doors as per directions of Engineer-in-charge shall be provided but weight for the same shall not be considered.(iii) Cost of all the items,accessories & Aluminium mongries required for the entire completion of the work shall be deemed to be included in the quoted rate.However glass panes, wire cloth shall be measured and paid separately under respective items |
| 27 | S&F 4mm thick plainsheet glass ofordinary qualityand glazing forAluminium Joinery, in squaresn.exc 0.50 sqm in each pane, complete all as specified and as directed. |
| 28 | S&F 4mm thickfrosted glass ofordinary qualityand glazing forAluminium Joinery, in squaresn.exc 0.50 sqm in each pane, complete all as specified and as directed. |
| 29 | S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width ofaperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and as directed. |
| 30 | S&F Aluminium anodised barrel towerbolt, 200 mm long of extruded section, complete all as specified and as directed. |
| 31 | S&F Aluminium anodised barrel towerbolt, 150 mm long of extruded section, complete all as specified and as directed. |
| 32 | S&F Aluminium anodised barrel towerbolt, 100 mm long of extruded section, complete all as specified and as directed. |
| 33 | S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and as directed. |
| 34 | S&F 75mm size stainless steel butt hinges, medium weight, cold rolled, mild steel, complete all as specified and as directed. |
| 35 | S&F200 mm size aluminium handle, cast type, anodised, complete all as specified and as directed |
| 36 | S&F150 mm size aluminium handle, cast type, anodised, complete all as specified and as directed |
| 37 | S&F100 mm size aluminium handle, cast type, anodised, complete all as specified and as directed |
| 38 | S&FHasp and staple 125mm size, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed . |
| 39 | S&F mild steel Helical door spring 300mm long ordinary rat tail type incl roaller & roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed. |
| 40 | M&L for IInd class hardwood Plain fillets. square,rectangular or triangular in section, clean sawn, secured with nails or brads of sectional area exc 13Sqcm and n exc 25 Sqcm complete all specified |
| 41 | M&L 18/19mm thick Pre laminated interior grade both sides laminated for cup boardetc complete including beading all as specified and as directed |
| 42 | S&F ball catches with 8 mm dia steel ball magnet catches for cuboard shutter including strking plate as approved etc completeall as specified and as directed |
| 43 | S&F continous (piano) hinges, mild steel, bright finish or eletro galvanised with of flap (when open) 30 mm etc complete all as specified and as direced |
| 44 | Dimantling of Asbestos cement (corrugated , semi corrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and as directed . |
| 45 | S&F pre-painted colored trapezoidal profiled Galvalume/Zincalume sheet with min 0.50mm TCT confirming to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating, 550 MPA yield stress as per AS-1397), colour /exterior coat of silicon modified polyster/ BHP X RW paint system 20 microntop coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, as in roof covering/ cladding to wall, fixed with and including Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals), complete all as specified and directed. |
| 46 | S&F pre-painted colored plain sheet profiled Galvalume/Zincalume sheet with min 0.50mm TCT confirming to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating, 550 MPA yield stress as per AS-1397),colour /exterior coat of silicon modified polyster/ BHP X RW paint system 20 microntop coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer,as in roof covering/ cladding to wall fixed with and including Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals), complete all as specified and directed. |
| 47 | S&F anodised aluminium snap grid of size 605x605mm frame work for false ceiling hangers 4mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out GIflat iron 40x3mm size 60mm long and fixed expansion hold fasteners 12.5mm dia and 40mm long,complete all as specified and as directed. |
| 48 | S & F 4mm thick Non-asbestos fibre cement decorative/designer building boards to steel frame work with screws in ceiling (flat and/or slopping) and including jointless finish with & also including joining compound and tape as per manufacturer instructions, including dismantlingof wall and ceiling boardscomplete all as specified and as directed.Notes :- (i)The board shall be confirming to IS-14862 and shall be manufactured from the homogeneious mixture of cement, quartz and cellulose and shall be curred with high pressure steam using auto claving process.(ii) Aluminium frame work shall be measured and paid for separately. |
| 49 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed . |
| 50 | S&F mild steel rolled sections [Fe 410-W (Gde E-250) quality - B] as in roof trusses (framed), trussed, main and cross beams, hip and jack rafters, purlins, Gusset plate and base plates, where connected to common rafters and running rails, distance pieces, cleats, guides for sliding doors; fixed with angle cleats or other connecting plates, framing for cladding, staging for water tanks, nuts, bolts, washers etc,includng welding or riveting etc, complete all as specified and as directed. |
| 51 | Taking down cement plaster on brick or concrete surfaces etc,including raking out joints, hacking for key, scrubbing down with water etc, and also including removal of rubbish off the premises, complete all as specified and directed.. |
| 52 | M&L for rendering 5mm thick on concrete surfaces of ceiling of chajja etcin cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and as directed. |
| 53 | M&L for rendering 15 mm thick in cement mortar (1:6), on other than fair faces ofbrick work or concrete surfaces, finished even and fair without using extra cement, complete all as specified and directed. |
| 54 | M&L for rendering 15 mm thick in CM (1:4) on fair face of brick work or concrete surfaces finsihed even and fair (without using extra cement) mixed with water proofing compound as per manufacturer instructions, complete all as specified and as directed. |
| 55 | Supply only integral water proofing compound, complete all as specified and as directed. |
| 56 | Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 15 mm dia bore complete all as specified and as directed |
| 57 | Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 20 mm dia bore complete all as specified and as directed |
| 58 | Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 25 mm dia bore complete all as specified and as directed |
| 59 | S&F laying of CPVC pipes SDR 11& plain CPVCSDR 1120mm outer dia laid in trenches/wall complete all as specifed |
| 60 | S&F 20mm bore medium grade, galvanized steel tubing (including in short lengths) with and including all fittings,complete all as specified and as directed. |
| 61 | S&F medium grade galvanized steel tubingwith all fittings & fixed complete to walls & ceiling or laid in floors 25 mm dia bore pipe (including in short length) complete all as specified and as directed |
| 62 | S&F in rotational moulded polyethylene water storage tank 500ltrs capacity, ISI marked, (cylindrical vertical type double-layered) with closed top including inlet,outlet and wash out holes, provision of G.I Fittings for fixing of the inlet, outlet and washout pipes, hoistedin position, including dismantling of existing water tankcomplete all as specified and as directed. |
| 63 | S&F Ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe of 20mm bore (Minimum weight 210 grms), complete all as specified and as directed. |
| 64 | S&Fin repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 25 mm bore and fixed ascomplete all as specified and as directed |
| 65 | M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete for Fe 410 (grade E-250 quality -A) |
| 66 | S&F Hard drawn steel wire fabric in available size weight not exc 4.00 Kg /sqm fixed in tank caging including welding, riveting, framing etc complete all as specified and as directed |
| 67 | Taking down existing un-servicable waterproofing treatment from roof slab and slab and cleaning the roof slab by wire brsh and removing WPT felt beyond the MOD premises etc complete all as specified . |
| 68 | M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surfacemixed with liquidwater proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately. |
| 69 | Application of waterproofing Coating : Providing and applying Fostoc Brushbond Roof Guard, a single component High build fibre Reinforced Acrylic Waterproofing render for roofing system tobe applied by brush, at three coats at minimum dry film thickness of 1 mm, which should cure by reaction with atmospheric moisture to give a tough elastomeric waterproof membrane.Solid Content - 70%, Tensile strength ASTM D 412-1.10 Mpa, Elongation ASTM D12-100%, Resistance to ageing due to - 1000hours, UV radiation ASTM D4587 E - No Change, Rapid Chloride Penetration ASTM c 1202 - Very low, Pull off adhesion ASTM D541 - 0.92 Mpa, Resistance to Algae growth ASTM D 5589-97 - Passes, Zero rating, Permeability (mm) (BSEN 12390 part 8) -n 5.0, Water vapour transmission (ASTM E 96) - 6.0g/m2h. |
| 70 | Demolition of brick work or rubbled stone masonry including all quoins, arches , pillars etc built in cement mortar including disposing off the retrieved debris outside the premises, complete all as specified and as directed. |
| 71 | M&L forBrickwork with fly ash Bricks(old size), straight or curved on plan to any radius in half brick walls built in Cement mortar (1:4), complete all as specified and directed |
| 72 | M&L forBrickwork with fly ash Bricks(old size), straight or curved on plan exc 6m mean radius built in Cement morter (1:6), complete all as specified and directed |
| 73 | S&F in repair sinks made of stainless steel1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm etc complete all as specified and as directed |
| 74 | S&F 0.5mm thick stainless steel plate rack of overall size 24x 30 x 10 inch of standard quality and shapes complete all specified and as directed. |
| 75 | S&F in repairs Vitreous China Wash Down Water closet (Pedestal Pattern) 1st quality,white (excluding flushing cistern & flush pipe) including plastic water closet seat white, closed pattern with flat bottom and cover and mild steel CP or aluminised huiging device, making connections, complete all as specified and as directed. . |
| 76 | S&F in repair PVC valveless double syphonic action type flushing cistern low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet including brackets & connection to pipe etc complete all asspecifiedand as directed |
| 77 | S&F in repair white vitreous china wash basin white flat back size 550x400 (Oval shape) excluding taps but including 32 mm dia chromium platedwaste fitting and PVC waste pipe 610 mm long andMS brackets complete all as specified and as directed |
| 78 | S&F as in repair 15mm bore Pillar taps fancy type, with long swan neck , chromium plated, screwed down high pressure, with or without lettered `Hot\" or `Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixedall as specified and as directed |
| 79 | S&F in repairs 600x 450mmbevelled edge mirror of decorative type, selected qualitymounted on and including 6 mm thick commercial plywood and provision of wooden plugs with chromium plated brass screws and cup washers for fixing, complete all as specifiedspecified and as directed. |
| 80 | S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 45cm long complete all as specified and as directed |
| 81 | S&F CP Towel Ring fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 150gms) complete all as specified and as directed . |
| 82 | S&F Brass CP Wall mixer 15mm dia for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. |
| 83 | S&F in repairtubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and as directed |
| 84 | S&F in repair chromium plated shower roses 125 mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified and as directed. |
| 85 | S&F in repair bib tap (Long body)fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed. |
| 86 | S&F in repair chromium plated two way angle stop cock 15mm dia complete all as specified and directed. |
| 87 | S&F in repair 15 mm Stop valves/ angle valve fancy type cast copper alloy with chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed.complete all asspecifiedand as directed. |
| 88 | Supply and fix15 mm dia 450 mm long PVC connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed. |
| 89 | S&F in repairs 32mm bore Low density polyethylene (LDPE) pipes of pressure rating 6kgf/sq. cm etc complete all as specified and as directed . |
| 90 | Dismantling of cast iron or reinforced concrete drain pipe up to 100 mm dia, jointed in cement mortar and taking out trenches if reqired etc complete all as specified and directed. |
| 91 | Supply and fix PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in trenches or in floors all as spcified. |
| 92 | Supply and fix PVC (SWR) pipes 110 mm bore single socketed in any length with rubber ring joints laid in trenches or in floors all as spcified.. |
| 93 | S&F PVC (SWR) Bends (any radius ), diminishing pieces or tapers, bore of pipe 75mm, complete all as spcified. |
| 94 | S&F PVC (SWR) access door bends (any radius )bore of pipe 75mm, complete all as specified. |
| 95 | S&F PVC (SWR) junction single, Single T equal or unequal for 75 mm bore of pipe as specified. . |
| 96 | S&F PVC (SWR) junction single, Single T equal or unequal for 110 mm bore of pipe as specified. |
| 97 | S&F PVC (SWR) Bends (any radius ), diminishing pieces or tapers, bore of pipe 110mm, complete all as spcified |
| 98 | S&FPVC (SWR) access door Bends (any radius ), bore of pipe 110mm, complete all as spcified. |
| 99 | Taking down PVC rain water pipes ( any size or pattern) including all fittings head shoes etc complete all as specified and as directed |
| 100 | S & F 110 mm dia PVC (SWR`) pipes single socketed in any length with rubber rings joints fixed to walls with suitable clamps complete all as specified |
| 101 | S&F PVC (SWR) vent Cowl for 110 mm bore pipe as specified. |
| 102 | S&F PVC (SWR) floor trap, plain with grating75mm including jointing to wast pipe fixed in cement concrete type B1 (1:2:4) ,in repairs and including waterleak proof treatment complete all as spcified. |
| 103 | Demolition of cement concrete (un-reinforced ) of any description & in any position not specifically provided for complete etc all as specified and as directed. |
| 104 | M&L for providing 75mm thick PCC (1:3:6) type C2 (using 20mm graded crushed stone aggregate), as in plinth protection, surface finished even & smooth without using extra cement including provision of 10 mm joints (at an interval of 3 metre and turnings) duly filled with fine sand and bitumen in the ratio of (3.1) complete all as specified |
| 105 | M&L for 25mm thick pcc type B-0, 1:2:4 (using 25 mm graded aggregrate) as in sub base of flooring . Complete all as specified and directed |
| 106 | S&F laying of CPVC pipes SDR 11& plain CPVCSDR 1125mm outer dia laid in trenches/wall complete all as specifed. |
| 107 | M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings, Chajja kerbs, roof padding/staging of water tank etc including necessary fromwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed. |
| 108 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed |
| 109 | M&L for providing Reinforced cement concrete Nominal Mix type A1 (1:1.5:3 )(20 mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likeall as specified. |
| 110 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) , complete all as directed by Engineer-in-charge. |
| 111 | M&L TMT bars 10 mm dia & over , cut to length, bent to shape required, including crancking, bending spirallyfor hooping for columns ,hooking ends & binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified & as directed. |
| 112 | M&L TMT bars 6 to 8 mm dia & over , cut to length, bent to shape required, including crancking, bending spirallyfor hooping for columns ,hooking ends & binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified & as directed. |
| 113 | M&L cement concrete 1:5:10 type E-2 using 20mm graded brick aggregates as in sunken portion of WC etc complete all as specified and as directed |
| 114 | M&L Providing 15mm thick cement plaster in cement mortar 1:6 in mixed with Pidi Proof LW or Dr Fixit @ 200 ml per 50kg of cement and finished even and smooth surface without using extra cement as in sunken floor treatment etc complete all as specified and as directed Note : WPC shall measured and paid saperately under respective item) |
| 115 | Cuttingchases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends and edges of landing ,steps,cills,sunshade,shelves,lintel,etc and cutting chases for concealed water tubing or concealed conduit wiring etc, making good, cutting not exc 10cm girth. |
| 116 | S&F decorative stainless steel curtain rod of wooden finish 20mm dia thickness not less than 0.75mm fixed with curtain rod holder fixed in walls wih screws and finials caps with 06 Nos of curtain ring per Rm complete all as specified and directed. |
| 117 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook includung making connection and fixed in position complet all as specified and directed |
| 118 | M&L for preparing new plastered surface of walls with applyingone coat of primer and applying two coat of oil bond distemper white or any tint etc over 1mm thick all care putty complete as specified and directed |
| 119 | M&L for complete removal of existing treatement of internal wall and appying two coat of oil bound distemper over 1 mm thick wall care putty including a coat of alkali resistant priming paintetc complete all as specified and as directed. |
| 120 | M&L for preparing newely plastered surface of wall applying wall care putty 1mm thick and applying two coats of 100% premiumacrylic smooth exterior painthaving VOC less than 50gm/ltr and UV resistance as per IS 15489:2004 alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ (Two or more coat applied @ 1.43 ltr/10 Sqm over and including priming coat of exterior primer applied @ 0.90 ltr /10 sqm etc complete all as specified |
| 121 | M&L for complete removing of existing treatment on wall applying priming andfinishing walls with acrylic smooth exterior paint of required shade:(Two or more coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm etc complete all as specified and as directed . |
| 122 | M&L for preparing new plastered surface of ceiling surface and applying three coats of white wash etc complete all as specified and as directed |
| 123 | M&L preparing old plastered surface of ceiling and applying one coat of white wash etc complete all as specified and as directed |
| 124 | M&L preparing new wooden surface of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed . |
| 125 | M&L preparing of old painted surfaces of wood & wood based surfaceof any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed |
| 126 | M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed |
| 127 | M&L for preparation of old painted surfaces of steel surfaceof any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed |
| 128 | Making good under cills over arches, lintel and bresummers,including all pinning when nessesary with using cement mortar 1:6 complete all as specified |
| 129 | M&L for 40mm thick cement concrete type B-1 (1:2:4:) (using 20 mm crushed stone aggregates) admixed with admixture aslan plints smartcare vitalla NEO (or any equlvalent brand of other manufacturer) at the rate of 200 gm /50Kg bag cement complete all as specified and as directed |
| 130 | M &L for Surface Preparation : Surface to be free from frost, surface laitance and contamination free from loose aggregate or other sharp protrusions with fairly smooth finish for applicaion of water proof coating prime the surface with water. In cluding removal of all existing treatment, bituminious membrane, tarfelt.screed concrete etc from rcc slab complete all as specified and as directed |
| 131 | M & L for Cracks & Honeycomb Treatment by Injection Grouting:- Identify the cracks and joints, shall be chased open into \"U\" groove shape. Prepared suitable surface as require to apply the mortar. Apply a bond coat of Fosroc Nitobond SBR Latex and sealed with Shrinkage controlled, polymer modified, fiber reinforced cementitious repair mortar, Fosroc Renderoc SP40. Fixing PVC nozzle, injection grouting to be done with cement slurry admixed with expanding grout admixture cebex 100 to be mixed @ 225 gm per bag of cement. complete all as specified and as directed |
| 132 | M &L for Bore Packing: Bore packing to be done at pipe entries by forming properformwork and filling the gap with non-shrinkable cementitious grout conbextra GP2 and sealed with epoxy/polyester sealant. |
| 133 | Supply only polyester triangular fibres as secondary reinforcement in all type of concrete and mortars complete all as specified and as directed |
| 134 | S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement etc complete all as specified and as directed |
| 135 | S&F PVC (SWR) Branch pieces , single (single Y )equal or unequal of pipe 75mm bore complete all as spcified. |
| 136 | S&F PVC (SWR) Branch pieces , single (single Y )equal or unequal of pipe 110mm bore complete all as spcified. |
| 137 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed |
| 138 | M&L for providing RCC M-20 (Nominal mix) (20 mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likecomplete all as specified and as directed |
| 139 | M&L Reinforced cement concreteM-20 (Nominal Mix)(20 mm graded aggregate)in Chajjas complete all as specified and as directed |
| 140 | M & L for Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and as directed |
| 141 | Cutting holes into or through brick/stone masonry walls built in cement mortar and making good in cement mortar 1:3 or cemnt concrete 1:2:4 type B-1 as required superficial area exc 150 sqcm and not exc 400 sq cm etc complete all as specified and directed |
| 142 | Taking down carefully existing aluminium point wiring (light / fan / socket or power point) complete, with all fittings such as switch socket combination, switches, sockets, regulator, ceiling rose, utility light fittings and lamp holders etc and making good the disturbed surfaces of walls, roof and floor etc to match with the existing specification, complete all as specified and as directed. |
| 143 | Taking dwn old/unsv distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/Main Switch including old Unsv MCCBs/MCBs, isloators , etc and making good to disturbed surface complete all as specified and as directed. |
| 144 | M&L for point wiring for one light point/ one fan point/ one exhaust fan controlled by 1 one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLSH) cable 1100 Volts grade drawn through and including rigid non metallic PVC concealed conduit (medium grade) of suitable dia, (also including conduit fittings, along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLSH) cable for earth continuity wire, connected to earth dolly and to be terminated in and including factory made anodized pressed steel sunken boxes (Having wall thickness not less than 1.22 mm for boxes suitable size and beyond that the wall thickness shall be not less than 1.63 mm), concealed type with and including 3mm thick bakelite sheet cover for mounting switches, sockets, fan regulators etc, testing on completion also including cutting chases for concealed conduit, steel boxes etc, pinning in, making good the surfaces in CM (1:3) tofor One light /Fan point controlled by one, one way switch match with the adjoining surfaces , complete all as specified and as directed. |
| 145 | All as per item No 144 here-in-before but for one fan point/exhaust fan point controlled by one wayswitch 5/6 Ampon the same board complete all as specified and as directed. |
| 146 | All as per item No 144 here-in-before but for one Light point controlled by Two wayswitch 5/6 Ampon the same board complete all as specified and as directed. |
| 147 | All as per item No 144 here-in-before but for one 3pin 5 Amp switch socket outlet,same boardcomplete all as specified and as directed. |
| 148 | All as per item No 144 here-in-before but for one 3pin 5 Amp switch socket outlet, independent boardcomplete all as specified and as directed. |
| 149 | All as per item No 144 here-in-before but for one bell point controlled by one bell switch5/6 Ampindependent boardcomplete all as specified and as directed. |
| 150 | All as per item No 144 here-in-before but for one 5/15 Amp switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLSH) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLSH) cable for earth continuity wire, complete all as specified and as directed. |
| 151 | S&F Modular switch 1 way 10A, 1 module 230 volts , 50 Hz , complete all as specified and directed. |
| 152 | S&F Modular switch 2 way 10A, 1 module 230 volts , 50 Hz , complete all as specified and directed. |
| 153 | S&F Modular switch 1 way 16A, 1 module 230 volts , 50 Hz , complete all as specified and directed. |
| 154 | S&F Modular bell push 6A, 1 module 230 volts , 50 Hz , complete all as specified and directed. |
| 155 | S & F socket, 6A, 2/3 pin combined 2 module 230 volts , 50 Hz , complete all as specified and directed |
| 156 | S & F socket, 6A/16A ,2/3 pin combined 2 module 230 volts , 50 Hz , complete all as specified and directed |
| 157 | S&F ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and as directed. |
| 158 | S & F Modular Regulator step type 120 watt, 2 module complete all as specified and directed. |
| 159 | S&F call bell ding dong type suitable for operation on 230 volt 50Hz AC supply, complete all as specified and directed. |
| 160 | S & F for plug top 15 Amps PVC/Polycarbonate type with suitable for 15 Amps socket fitting omplete all as specified and directed. |
| 161 | Material and labour for sub main wiring with 2 run of single core PVC insulated (unsheathed) multi stranded copper conductor FRLSH cable of size 2.5sqmm and onesingle core PVC insulated (unsheathed) multi stranded copper conductor FRLSH cable of size 2.5sqmm as in continuous earth wire drawn into and including concealed PVC conduit, medium grade of 20mm bore complete with fittings, PVC Junction Boxes, fixings accessories, also including cutting chases, pinning in, making good to facing and pointing in using cement mortar 1:3 and making good disturbed surfaces to match with the adjoining surfaces, including taking down existing sub main wiring complete all as specified and as directed.Note:- For payment purposes, 2 runs of main cable (each of 1RM) 1 run of earth continuity cable (1RM) and one run of conduit (1RM) all together shall be considered as \"1RM\". |
| 162 | Material and labour for sub main wiring with 2 run of single core PVC insulated (unsheathed) multi stranded copper conductor FRLSH cable of size 4sqmm and onesingle core PVC insulated (unsheathed) multi stranded copper conductor FRLSH cable of size 4sqmm as in continuous earth wire drawn into and including concealed PVC conduit, medium grade of 20mm bore complete with fittings, PVC Junction Boxes, fixings accessories, also including cutting chases, pinning in, making good to facing and pointing in using cement mortar 1:3 and making good disturbed surfaces to match with the adjoining surfaces, including taking down existing sub main wiring complete all as specified and as directed.Note:- For payment purposes, 2 runs of main cable (each of 1RM) 1 run of earth continuity cable (1RM) and one run of conduit (1RM) all together shall be considered as \"1RM\". |
| 163 | Material and labour for sub main wiring with 2 run of single core PVC insulated (unsheathed) multi stranded copper conductor FRLSH cable of size 6sqmm and onesingle core PVC insulated (unsheathed) multi stranded copper conductor FRLSH cable of size 6sqmm as in continuous earth wire drawn into and including concealed PVC conduit, medium grade of 25mm bore complete with fittings, PVC Junction Boxes, fixings accessories, also including cutting chases, pinning in, making good to facing and pointing in using cement mortar 1:3 and making good disturbed surfaces to match with the adjoining surfaces, including taking down existing sub main wiring complete all as specified and as directed.Note:- For payment purposes, 2 runs of main cable (each of 1RM) 1 run of earth continuity cable (1RM) and one run of conduit (1RM) all together shall be considered as \"1RM\". |
| 164 | S&F MCB, SPN, DB, 8 ways, Metal door, IP-54 IK 08 in 200Aprotection double door, with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc, insulated busbar 240 voltsassembly complete including provision of blanking plates as required & fixed flush to wall and making good the disturbed surfaces in CM 1:3, completeall as specified and directed. |
| 165 | S&F MCB, SPN, DB, 12 ways, Metal door, IP-54 IK 08 in 200Aprotection double door, with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc, insulated busbar 240 voltsassembly complete including provision of blanking plates as required & fixed flush to wall and making good the disturbed surfaces in CM 1:3, completeall as specified and directed. |
| 166 | S&F MCB, SPN, DB, 4 ways, Metal door, IP-54 IK 08 in 200Aprotection double door, with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc, insulated busbar 240 voltsassembly complete including provision of blanking plates as required & fixed flush to wall and making good the disturbed surfaces in CM 1:3, completeall as specified and directed. |
| 167 | S & F MCB single poleneutral rated capacity 40 to 63 amp rating 240V, breaking capacity10KA \"C\" curveand currentindication for individual pole and designed based on advanced current limiting hammer trip mechanism ,complete all as specified and directed. |
| 168 | S & F MCB single pole rated capacity 5 to 32 amp rating 240V, breaking capacity10KA \"C\" curveand currentindication for individual pole and designed based on advanced current limiting hammer trip mechanism ,complete all as specified and directed. |
| 169 | S & FDecorative wall lingh fixture, brushed nickel finish, suitable for 9 W LED lamp (B22) including 9/10 W LED Bulb etc, complete with all accessories internally pre-wired and including connecting up with twin core twisted fiexible copper conductor cable suitable size, complete all as specified and directed. |
| 170 | Supply and fixing LED tube light batten type made of CRCA sheet with decirative end caps suitable with ultra bright glass LED tube light 1x18/20 watt T8 type single side connection complete with both end bi-pin holder and all accessories internally prewired and fixed to wall/celling incl fittings accessories and connecting up with twin core fexible copper conductor cable suitable size all as specified. |
| 171 | S & F for wall mounted LED tube light fitting 10 watts batten for surface mounted, anodized extruded aluminium housing , high transmissitivity diffuser , high lumen output box type fitting , 230 volts and intregated electronic driver connector block etc , complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193from ceiling rose to fitting complete all as specified and as directed. |
| 172 | S & F in replacement light fitting .1x10W LED bulk head luminaries IP65, Min -50,000 burnong hrs ,Diffuser made of high grade polycarbonate , high pressure die cast aluminium housing ,CCT-5700K,240 volt complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50HZ complete all as specified and as directed. |
| 173 | S & F energy saving new generator enviromental friendly long life versatile presure die cast aluminium IP 66 for securty ligh fitting luninaire with high power LEDs as ligh source (100 Im/watt) with LDR sensor for automatic ON/OFF operation and electronic driver of capacity 25 watts with pre-wared and necessary mounting arrangements and provison of 1.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade braket 1.5 mtr long bend to requred shape with clamps, nut botls including painting of mild steel flat iron surfaces with two coats of synthetic enamel paint over a coat of red oxide primer , complete all as directed by Engineer-in-charge. |
| 174 | Taking down ceiling fan/exhaust fan any sweep and depositing the same to MES store yard complete all as specified and directed |
| 175 | S&F energy saving BLDC ceiling fans 1200mm sweep 230 volts 50 Hz 5 ster BEE rated with brushless dierct current motor (BLDC) , energy saving, 100% copper wound motor with anti corrosive alluminium blades of minimum thickness 1.10mm powder coated finished , double bell bearing service value 6.00, BIS certified and on site 5 years of warranty, wattage range 26-32 watts, min air delivery 220 CFM (+/-2%) with service value 6.50 ;complete all as specified and as directed. |
| 176 | S & F for energy Exhaust fan of 300 mm sweep made of metal body Ventil Air-DS type complete with louver with botls nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaut fan for connection and making suitable size of hole to esiting brick wall for fan base complete all as specified and directed. (Note: Cost of suitable opening wall for fixingexhaut fan is deemed to be included in overall rate quoted). complete all as directed and specified. |
| 177 | S & F for energy Exhaust fan of 230 mm sweep made of metal body Ventil Air-DS type complete with louver with botls nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaut fan for connection and making suitable size of hole to esiting brick wall for fan base complete all as specified and directed. (Note: Cost of suitable opening wall for fixingexhaut fan is deemed to be included in overall rate quoted). complete all as directed and specified. |
| 178 | Supply and fixingGI pipe 50 mm bore medium grade with all fittings fixed to wall for hanging of ceiling fan only complete all as specified and as directed. |
| 179 | Supply, installation, commissioning and testing LT wall mounting Panel Board of minimum size 1.00 m (height) x 1.00m (breath) x 0.30m (depth) factory made CPRI approved panel, weather, dust & vermin proof indoor, double door, front openable and providing rubber/ PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/sleeves with MCCB/MCB output of suitable length for connection of cable from main busbar, made out of 2.00mm thick mild steel CRCA sheet with suitable size angle iron supporting frame including applying two coats of Powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfaces suitable for 3 phase 4 wire system 415/440 volts grade including complete internal wiring with 1.5 sqmm copper wire and connections of all outgoing / incomming exisiting cable of any size complete all as directed by Engineer-in-Charge.INCOMMING (a) Copper strip busbar of size 25x5 mm wrapped with PVC sleeves with maintained the colour code and provision of making holes with copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends= 4 nos.(b) MCCB IP 44 and IP 66/67 protection, 4 pole, 415 volts, Lcu=25 KA breaking capacity rating 63 Amps, adjustable thermal magnetic release including all fixing accessories with both ends spreader links-01 Nos.(c) Digital voltmeter of range (0-500) volts, flush mounting type of size100mm x 100mm (4\"x4\") square dial with selection switch - 01Nos (Make : Legrand/ Schneider/L&T)(d) LED Neon indicator lamp (RYB) with holder. 230/250 volts AC -01 set (set of three) Make :- AE/L&TOUTGOING(a) MCB, Single pole & neutral, 32 amps, 240 volts, \"C\" curve, 10 KA all complete as specified and as directed -08 Nos (One no Meter input and one no Accn Output).(b) MCB, Single pole 6 amps, 240 volts, \"C\" curve, 10 KA all complete as specified and as directed - 02 Nos (Stair case lighting)(c) Refixing of old electric meter - 04 nos |
| 180 | Supply, installation andtesting of electric water heater storage vertical type, 5 star rated, 25 ltr capacity comprising of high wattage heating element for instant heating, extra Mild steel with Glass lined coated inner tank, rust & shock proof ABS outer body, non-ferrous pressure plate with & including provn of 04 Nos grouting bolts suitably flushed to wall or any other surface including electric connection with 3 core PVC insulated, sheathed, stranded copper conductor cable/ flexible chord and one no 15 amps 3 pin plug top andPVC connection pipe hot and cold type, 15 mm dia, 450 mm long with brass adopter & washer on both sides for inlet and outlet of hot and cold water complete all as specified and as directed. |
| 181 | M&L for Earthing complete with galvanized steel earth plate electrode 600 mm X 600 mm X 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level, connected to galvanised earth strip 25x4mm diaby means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 3 of SSR Part - I, including necessary excavation and earth work, PCC (1:3:6) type C-1 with 50 mm thick Pre-cast RCC (1:2:4) type B-1 cover slab (reinforced with 8 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (Medium grade), wire mesh, aluminium lugs, complete in all respect, GI earth strip protected by 15 mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 m and necessary testing on completion, including dismantling old unsv ones complete all as specified .Note: GI earth strip 25x4mm dia and 40mm bore protection pipe upto 7.5m from earth plate is deemed to be included in the rate quoted be contrator. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
