|
| 1 | Demolition of cement concreteand paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 2 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed |
| 3 | Demolition of brick work /stone masonry masonry built in cementmortar of any description complete all as specified and as directed |
| 4 | Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm eachetc complete all as specified and as directed |
| 5 | Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4.0 Sqm each etccomplete all as specified and as directed |
| 6 | Taking down shutter of any description area exc 1.00 Sqm but not exc 2.00 sqm each etc complete all as specified and as directed |
| 7 | Taking down cement plaster of any description hacking for key or raking out joint on old brick work/ stone /concrete surface etc complete all as specified and as directed |
| 8 | Demoition of Stone slabs and tiles of anydescription or thickness infloors, aprons , laid bedded and pointed in any mortar etc complete all as specified and as directed |
| 9 | Dismantling floor, hearth orwall tiling including cementmortar bedding (but notbacking), removing serviceable tiles to store and rubbish off thepremise etc complete all as specified and as directed |
| 10 | Taking up or down 15mm steel tubing and connections incl cleaning for refixing and removal to store etc complete all as specified and as directed. |
| 11 | Taking up or down 20 mm steel tubing and connections incl cleaning for refixing and removal to store etc complete all as specified and as directed. |
| 12 | Dismantling water tanks and removing to store (exc 500 and not exc 1000 ltr capacity) etc complete all as specified and as directed |
| 13 | Dismantling water tanks and removing to store (exc 250 and not exc 500 ltr capacity) etc complete all as specified and as directed |
| 14 | Demolition and breaking up drainpipes up to 100 mm dia bofe (Saltglazed ware, AC orReinforced concrete)set in cement mortaretc complete all as specified and as directed |
| 15 | Dismantling of Plain or corrugated steel sheeting,any gauge, thickness, includingNainital orsimilarpattern roof coverings etc complete all as specified and as directed |
| 16 | Dismantling of Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and as directed |
| 17 | Dismantling timber scantlings 40 sq. cm and over in section, in any position as in Framed work etc complete all as specified and as directed |
| 18 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed |
| 19 | Demolition of Wallandceilingboards(fibre,pulp, insulation, etc.) orinsulationboards/slabs/blankets, any thickness, includingcover fillet) etc complete all as specified and as directed |
| 20 | Material and labour for Sand filling under floors or in foundations including watering and consolidationall as specified and directed |
| 21 | Material and labour providing cement concrete 1:2:4 type B0(using 12.50mm graded stone aggregate) in copings, parapets and railing upto 60cm height, leveling concrete for Roof slab, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating as directed |
| 22 | Material and labour for Pre-cast cement concrete 1:2:4 type B1( using 20 mm graded stone aggregate ) as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 etc complete all as specified and directed. |
| 23 | Material and labour for cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in hold fast and fillingof pressed steel chowkatetc complete all as specified and as directed |
| 24 | Supply only water proofing compound (Liquid) complete all as specified and as directed. |
| 25 | Material and labour Brickwork (Old size Brick) with sub class ‘B’ bricks, straight orcurved on plan exc 6mmeanradius built in cement mortar 1:6 etc complete all as specified and as directed |
| 26 | Material and labour Cutting chases, pinning in, makinggood to facingsin brick walls where required andpointing in cement mortar 1:3 toends or edges of landings, steps,cills, sunshades, shelves, lintels, etc.;and cutting chases for concealedwater tubing or concealed pipe line etc. and making good,cutting exceeding 20cm girth etc complete all a specified and as directed |
| 27 | Material and labour for 18 to 20mm thick granite Granite stone slab(of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab including grinding the edges half roundetc complete all as specified and as directed |
| 28 | Supply and fix 30mm thick flush door shutter solid core construction with block board core and ply wood face panes, connerical tuype on both sides etc complete all as specified and as directed |
| 29 | Supply and fix 2nd class hard woork rail and style of 32 mm thcik Plain framed, panelledshutter (two panel) withlock rail and panel of 9 mmB.W.P. commercial ply or 12mm veneered particle boardwith commercial veneeringon both faces. The size ofrail and stile as per IS : 1003 (Part I), kiln seasoned andchemically pressuretreated etc complete all as specified and as directed |
| 30 | Supply and fix 2nd class hard wood 30 mm thick Glazed andskeletonshutters, openrebated and preparedto receive glass,gauze, etc. (withoutsash bars),edges offraming plain,chamfered orrounded. fitted withcut and mitred beadsfor securing glass, etc.; sizes of me-mbers of shutters asspecified inSSR PartI, Section 8, clause8.24(a); supplied andfitted to chowkats etc complete all as specified and as directed |
| 31 | Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing etc complete all as specified and as directed |
| 32 | Supply and fix factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on backface etc. complete all as specified and as directed. |
| 33 | Supply and fix in repairs stainless steel decorative curtain rod of 25 mm bore incl fancy finale caps cap (02 nos in each curtain rod)etc complete all as specified and as directed |
| 34 | Supply and fix in repair brass chromium plated designer Bracket for curtain rod of dia 25 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long etc complete all as specified and as directed |
| 35 | Supply and fix 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed etc complete all as specified and as directed |
| 36 | Supply and fix aluminium anodised towerbolt 150mm long of extruded section etc complete all as specified and as directed |
| 37 | Supply and fix 100 mm thick butt hinges, medium weight, stainless steeland fixed etc complete all as specified and as directed |
| 38 | Supply and fix150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed |
| 39 | Supply and fix in repairs helical door spring of 150mm long smooth functioning, automatically closing incl welding / reveting etc complete all as specified and as directred |
| 40 | Supply and fix in repairs door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg with alumnium die cost body etc complete all as specified and as directed |
| 41 | Supply and fix in repairs double action floor springs, hydraulically regulated made up of min 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass other parts made of mild steel heave duty and fixed etc complete all as specified and as directed |
| 42 | Supply and fix Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed \" |
| 43 | Supply and fix aluminium Powder Coating (minimum thickness of powder coating 50 micronframe in aluminium partions having horizontal & vertical distance between two frames not exc 1.00 m & sectionof size 50 mm x 44.5mm of 16 guage of such type arrangement for fixing glass/pre-laminated board on both/one sidecomplete with fixed in brick masonary/conc work by necessary drilling & rawl plug arrangement in(floor/glass/etc.) incl taking down existing wall partition incl taking down existing partition of any description etc complete all as specified and as directed Note - Glass / particle board shall be measured and paid separately under respectiveitems. |
| 44 | Supply and fix window or ventilators fabrication from roll framed section made of galvanized steel colour / powder coated (base steel as per IS-513 \"D\" quality galvanized as per IS-277 with Zinc coating of 120 gms/ Sqm. with total coated thickness of 0.58 mm section for frame should be of 72mmX55mm, section of mullion should be of 72mmX50mm, section for frame should be of 40mmX20mm, section for fixed glass bead should be of 12mmX12mm, section of fly mesh should be of 40mmmX20mm, section for frame framed glazed shutter and mesh shutter should be cut to length and mitre joined with polypropylene corner brackets, mullions section should be jointed with frame mullion using mullion caps Ethyl Propylene Damien monomer (EPDM) gasket should be used all around glass in shutter and fixed glass spoon section should be used around fly mesh to fix mesh in mesh shutter and including each glazed shutter and mesh shutter should be provided withstainless steel pivot flings-I set, secular handle & secular stay window frame should be fixed to brick / concrete masonry by using Nylon self-expanding caps and driving MS electroplated 800 mm long screwed into the caps through frame including Grill made of 10 mm Sqm bars welded to 150 mm Centre to Centre , 6 mm X 12 mm MS Flat. total Grill unit should be powder coated and fixed to window frame with screws and including with primer coat of Epoxy primerof 5-7 micron thicks painted with polyester paint 12-16 microns thick of powder coated with polyester up to 50-60 micron thick complete all as specified and as directed.notes wire mesh and glass will be measured and paid separately under relevant items of Schedules |
| 45 | Supply and fix Factory made 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with double rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed |
| 46 | Supply and fix Factory made 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with single rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed |
| 47 | Supply and fix Powder Coating (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified and as directed |
| 48 | Supply and fix Powder Coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed/Sliding typewithout sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as specified etc. complete shall as specified and as directed Note - Wire Cloth & Glass shall be measured and paid separately under respectiveitems. |
| 49 | Supply and fix Powder Coating (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directedNote - Particle Board & Glass shall be measured and paid separately under respectiveitems. |
| 50 | Material and labour Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality-A etc complete all as specified and as directed |
| 51 | Material and labourfor rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St.-240 complete all as specified and as directed. |
| 52 | Material and labour Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and as directed |
| 53 | Supply and fix Steel windows with side hungshutters including projecting typehinges with steel handle, and steelpeg stay,complete with glazing bars,dovetailed or weldedcomplete all as specified and as directed. |
| 54 | Supply and fix Steel windows with side hungshutters including projecting typehinges with steel handle, and steelpeg stay,complete without glazing bars,dovetailed or weldedcomplete all as specified and as directed. |
| 55 | Material and labour for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed |
| 56 | Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as complete all as specified and as directed. |
| 57 | Supply and fix pre-painted hot dip aluminium zinc alloy metalic coated trapezoidal profile steel sheet 0.50mm thick (total coated thickness), any patteren corresponding to IS 15965: 2012 of durability class 3, four (4) coat atmospheric classification category 3, coating class AZ 150 of an approved colour havingb yield strength of 550MPa as in roof covering/wall cladding, fixed with self tapping screws as specified and as directedNote: To be executed for provison of ridges and hips, valley etc complete all as specifed and as directed |
| 58 | Supply and fix 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. fixed with self tapping screwsetc complete all as specified and as directed |
| 59 | Supply and fix in reapirs 18mm thick Block boards, grade 1 quality, exterior grade, commercial type, Water proof, termite proof, fixed with screws to timber frame-work as in wall panelling / cub board shutter, Kitchen shelves and modular kitchen shutter, shelves, drawers etc over 0.90 mm thick decorative laminate type 1, of surface finish (both side of shutter), colour and pattern as approved, fixed with approved adhesive as per maker\"s instructions etc complete all as specified and as directed |
| 60 | Supply and fix in repairs 7 to 8 mm hollow profile thickness thick PVC Coloured Sheet(any Shape, coloured, pattern as approved ) suitably placed in false ceiling incl making sunken side corner, design as directed etc incl grid work made of G.I./M.S. as per Mfd Instruction etc complete all as specified and as directed |
| 61 | Supply and fix in repairs 7 to 8 mm Hollow Profile thickness, Printed colour PVC sheet (Any size, shape, Texture as approved) in strips & channel feathered at the edges for fixing on Wall cladding / Vertical surface and fixing at site incl grid work made of G.I./M.S. as per Mfd Instruction etc complete all as specified and as directed |
| 62 | Supply and fix false ceiling with suspended system of size 600X600mm of standard section consisting of main runner of size 15X32mmX0.30mm thick , cross Tee(15X32mmX0.30mm) and wall angle (15X15mm X0.30mm , ceiling suspended with 4 mm dia GI wire hanger fixed with steel dash fastner, butter fly clips, hold down clips etc (Main corner, cross tee& wall angle of MS galvanized with 4 mm thick E board HPSC self textured design pre primered non asbestos fibre cement building boards fixed to false ceiling etc complete all as specified and as directed |
| 63 | Supply and fix 8 mm aluminium composite panel, exterior grade, with both side decorative choice lamination & fixed with screws in Door / Partiton work etc omplete all as specified and as directed |
| 64 | Material and labour for 75 mm thick cement concrete 1:4:8 type D- 2,(using 40mm graded stone aggregate) asin sub base of flooing etc complete all as specified and as directed |
| 65 | Material and labour for cement concrete type 1:2:4B-0 (12.5 mm graded stone aggregates) 25 mm thick as in sub base of flooring etc completeall as specified and as directed |
| 66 | Material and labour for 75 mm thick PCC 1:3:6, type C-1,( using 20 mm graded aggregates) as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade \"A\" complete all as specified and directed. |
| 67 | Material and labour for screed bed or beddinglayer of mortar 15 mm thick in CM 1:6 for laying floorfinishesetc complete all as specified and as directed |
| 68 | Material and labour for rendering 10 mm thick in CM 1:3 for backing coat of tiles / dado etc complete all as specified and as directed |
| 69 | Material and labour for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchetc complete all as specified and as directed |
| 70 | Material and labour for Virified Ceramic tiles (Drak Shade/ double Charaged/Ultra Charged ) 9 to 10 mm thick (square/ rectangular) polished, area ofeach tiles exceeding 0.42 sqmbut not exceeding 1.00 sqm, infloors etc. set and jointed in neatcement slurry and pointed in white or coloured cement to matchetc complete all as specified and as directed |
| 71 | Material and labour for Machine cutkota stone slabflooring 20-25mm thick overcement screedbase laid andjointed with grey cement slurrymixed with pigment to match theshade of the slab including rubbing and Mirror polishing incl cutting edges complete all as specified and as directed complete all as specified and as directed |
| 72 | Supply and fix for exterior grade, coloured glossyfinish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thickset, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles over etc complete all as specified and directed. |
| 73 | Material and labour for heavy duty parking tiles (Coloured ) 8 to 9 mm thickarea ofeach tiles exceeding 0..09 sqmbut not exceeding 0.18 sqm asinfloors etc. set and jointed in neatcement slurry and pointed in white or coloured cement to matchetc complete all as specified and as directed |
| 74 | Material and labour for glazed ceramic tiles (Coloured) as invertical surface 450X 350X 7mm thickset and jointed in neat cement slurry and pointedin white or colour cement to match etc complete all as specified and as directed |
| 75 | All as per item no 69 avove but as in vertical surface etc complete all as specified and as directed |
| 76 | All as per item no 70 avove but as in vertical surface etc complete all as specified and as directed |
| 77 | All as per item No 71 above but as in skirting /dado / Vertical Surface etc complete all as specified and as directed |
| 78 | Material and labour for Rubber Moulded glossy finished pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced vibro compacted any shape and size confirming to IS-15658-2006of 80 mm thick, M-40 grade to match with grey cement and pigment etc complete all as specified and as directed |
| 79 | Material and labour for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed |
| 80 | Material and labour for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately |
| 81 | Material and labour for screed bed 10 mm thick in CM 1:3 mixed with water proofing compound to receive roof tratement etc complete all as specified and as directed Notes:WPC shall be measured and paid seperately under relevant itesm |
| 82 | Material and labour for removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smoothand APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017, 3mm thick and weighing not less than 3.00kg/Sqm reinforced with non woven polyster/HMHDPE matt black finished over compatible primer @ 0.30 Litr/Sqm and torch applications of membrane with 100mm side overlap and 150mm end lap after necessary preparation of surface complete as per manufacturer\"s instructions and applying a coat ofaluminum paint on top @ 0.10 litre/sqm incl taking down existing HP tiles or any other treatment etc complete all as specified and as direted |
| 83 | Complete removal exising treatment (External/Internal wall) by means of wire brushing, sand paper, manually or mechanically up to visible of plastered surface incl rubbing and washing etc complete all as specified and as directed |
| 84 | Material and labour for 1mm thick wall care putty on wall including preparation of surface with sand paper etc to obtain smooth surface etc complete all as specified and as directed |
| 85 | Material and labour for preparing new plastered suface of walls and applying two coats acrylic distemper , white or tinted over a coat of primer etc complete all as specified and as directed |
| 86 | Material and labour for preparing old plastered suface of walls and applying one coats acrylic distempercomplete all as specified and as directed |
| 87 | Material and labour for preparation old plastered surface of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance (Apex Ultima), dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. etc complete all as specified and as directed |
| 88 | All as per item no 87 above but new plastered surface of wall |
| 89 | Supply and fix in repair 12 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes, incl pivet, hinges , Stainless steel handle 02 nos (250mm long) incl fixing arrangements, etc complete all as specified and as directed . |
| 90 | Supply and fix 5.5mm thick tinted sheet glass and glazing with oil putty in squares exc 0.5 sq. m in each pane etc complete all as specified and as directed |
| 91 | Supply and fix 4mm thick Figured glass, pin head type and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed |
| 92 | Supply and fix 4mm thick sheet Glass, Ordinary qulatity and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed |
| 93 | Material and labour for Preparation of new or previously un-treated steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed |
| 94 | Material and labou for preparation of new or previously un-treated wooden surfaces of any description exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed. |
| 95 | Supply and fix in repair vitreous china wash down water closet pan(Pedestal Pan) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat , black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc, coloured closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed |
| 96 | Supply and fix in repairs vitreous China wash down one piece water closet pan (EWC) Italian collection (RENE Starwhite) of size 59cm x 36cm x 71cm,(pedestal pattern),complete series, white, including vitreous China flushing cistern (inbuilt with EWC) & plastic water closet seat white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device incl connection to drain (out going pipe) and to flushing pipe, antisyphonage pipe,etc complete all as specified and directed |
| 97 | Supply and fixin repairRimless Wall Hung WC With InbuiltJet, PP Soft Close Slim Seat Cover, Hinges, Accessories Set,Size: 355x555x370 mm of Cat part no FLS-WHT-5953JPPSM ( FLORENTINE Series) of Jaquar series incl fixing etc complete all as specified and as directed |
| 98 | Supply and fix in repairs viterous china squatting pan orrisa pattern of size 580X440 mm white with integral foot rest \"P\" trap including connecting to trap incl S trap or P trap and flush pipe anti-symphonage pipe etc complete all as specified and as directed |
| 99 | Supply and fix in repairs vitreous china wash basin white, flat back, size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets and including, 32 mm bore waste CP couplingand 32mm bore LDPE pipe 600 mm long and 15 mm bore 450 mm long PVC connection etc complete all as specified and directed. |
| 100 | Supply and fix in repairtable top basin,size: 500x425x130 mm incl 32 mm dia bore coupling, waste pipe etc ( of Make - FLS-WHT-5935 ( FLORENTINE Series) of Jaquar series incl fixing etc complete all as specified and as directed |
| 101 | Supply and fix in repair Single Piece Concealed Cistern Body (Front or Top Actuation)with Installation Kit & “S-Type”drain pipe connection set for Wall Hung WC (without Flush Control Plate)) of cat Part no -JCS-WHT-2431S Jaquar series incl fixing etc complete all as specified and as directed |
| 102 | Supply and fix in repair flush plate Control Plate Kubix of Cat Part No - JCP-CHR-352415 0f Jaquar series incl fixing etc complete all as specified and as directed |
| 103 | Supply and fix in repairs Viterous China urinals, Full Stall stall type, complete including providing and fixing plugs, beddings urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, incl urinal spreader 15 mm bore, suitable size of 15 mm bore PVC connection 450 mm long and 40 mm dia bore 600 mm long LDPE incl 40 mm dia bore waste coupling etc complete all as specified and as directed |
| 104 | Supply and fix in repairsPVCflushing cisrern valveless with flushing out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets & connection to pipe etc 15 mm dai bore PVC connection 450 mm long complete all as specifiedand as directed |
| 105 | Supply and fix in repairs 15 mm dia bore CP Bib taps, fancy type long body withcrutch orbutterflyhandle, screweddown, screwed foriron pipe or forbrass ferrule andfixed etc complete all as specified and as directed |
| 106 | Supply and fix in repair Wall Mixer(Queen’s Prime) 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower of Cat PArt no -QQP-7281PM Jaquar series incl fixing etc complete all as specified and as directed |
| 107 | Supply and fix in repair Central Hole Basin Mixer (Queen’s Prime) with Popup Waste System with 450mm Long Braided Hosesof Cat PArt no -QQP-7169BPMJaquar series incl fixing etc complete all as specified and as directed |
| 108 | Supply and fix in repairs 15 mm dia bore CP fancy type long body Stop valves/ Angle cock castcopper alloy,screweddown,highpressure,withcrutch or butterfly handle,screwed bothends forironpipe orforunions and fixed etc complete all as specified and as directed |
| 109 | Supply and fix in repairs Bib Cock 2 way double handlewith CP flange fancy type long body withcrutch orbutterflyhandle, screwed down, screwed foriron pipe or forbrass ferrule andfixed etc complete all as specified and as directed |
| 110 | Supply and fix in repairs 15mm dai of boreChromium plate Pillar taps Fancy typescrewed down highpressure, with orwithout lettered\"Hot\" or \"Cold\" withlong screwedshanks and fly-nuts, screwed for ironpipe and fixedetc complete all as specified and as directed |
| 111 | Supply and fix in repairs Looking mirror of 600mmx450mm bevelled edge mirror ofselected quality glass, mounted on 6mmthick AC building board or commercialplywood and fixed to wooden plugs withchromium plated brass screws and cupwashersetc complete all as specified and as directed |
| 112 | Supply and fix inin repairs looking mirror 8 to 9 mm thick, area exc 0.80 sqm but not exc 2.00 sqm with bevelled edge mirror fixed with 04 nos of Stud etc complete all as specified and as directed |
| 113 | Supply and fix in repairs Health faucet chromium plated suitable for 15 mm diapipe with 1.25 metre long flexible tube including makingconnections and fixed in position etc complete all as specified and as directed |
| 114 | Supply and fix in repairsSheet glass shelf assembly consisting of5.5mm thick sheet glass shelf 12cm widewith chromium plated bracket guard andrailing 60cm long etc complete all as specified and directed |
| 115 | Supply and fix in repairs unbreakable corner shelf (3Pcs set i.e 8\"-1, 10\"-1 & 12\"-1)complete all as specified and directed |
| 116 | Supply and fix in repair soap dispenser with metallic bottle incl fixing etc complete all as specified and as directed |
| 117 | Supply and fix in repairsingle towel rail 600mm Long, Stainless Steel incl fixing etc complete all as specified and as directed |
| 118 | Supply and fix in repairtowel ring Square with Round Flangeof incl fixing etc complete all as specified and as directed |
| 119 | Supply and fix GI Tubes, 15 mm dia bore of pies \"medium gradegalvanised, withall fitting andfixed completeto walls andceilings or laidin floors etc complete all as specified and as directed |
| 120 | Supply and fix GI Tubes, 20 mm dia bore of pies \"medium gradegalvanised, withall fitting andfixed completeto walls andceilings or laidin floors etc complete all as specified and as directed |
| 121 | Supply and fix rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs incl 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc complete all as specified and directed |
| 122 | Supply and fix rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 500ltrs incl 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc complete all as specified and directed |
| 123 | Supply and fix in repairs 25mm dia ball valves highpressure of PTMTwithepoxy coatedaluminiumrod&highdensity plastic ballscrewed for iron pipe and fixed.(25mm-455gms) etc complete all as specified and as directed |
| 124 | Supply and fix in repairs 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and as directed |
| 125 | Supply and fix in repairs 75 mm dia bore PVC (SWR) multi floor trap with grating including jointing with solvent cement etc complete all as specified and as directed |
| 126 | Supply and fix 110 mmPVC, SWR pipes, single socketed in any length with rubber ring joint fixed to walls etc etc complete all as specified and directed |
| 127 | Supply and fix 75 mmPVC, SWR pipes, single socketed in any length with rubber ring joint fixed to walls etc complete all as specified and directed |
| 128 | Supply and fix PVC bends (any radius) of 110mm dia with access door etc complete all as specified and as directed |
| 129 | Supply and fix PVC vent cowls of 110mm dia etc complete all as specified and as directed |
| 130 | Supply and fix PVC bends (any radius) of 75mm dia with access dooretc complete all as specified and as directed |
