|
| 1 | Demolition of cement concrete of any description and in any position not otherwise specifically provided forand removing rubbish to a distance n.exc 50m at low lying area complete all as specified and as directed. |
| 2 | Demolition ofBrickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles all as directed. |
| 3 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons all as specified and directed by Engr-in-Charge |
| 4 | Dismantlingold particle boards/plywood as in shelves boarding, any description, fixed in any position with nailscomplete all as specified and directed. |
| 5 | Dismantling of wall and ceiling boards( fibre pulp insulation etc) any thickness including cover fillets all as specifed and directed. |
| 6 | Removing excavated mateials n.exc 50 mtr & depositing where directed at a level n.exc 1.5 mtr above the starting point.complete all as specified & directed by Engr-in-Charge. |
| 7 | Excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil complete all as specified and directed |
| 8 | Excavation in trenches not exec 1.5m wide and not exec 1.5m in depth for foundation etc or for shaft well, manhole, Sewageline etc not exec 10 sqm on plan and not exec 1.5m depth and getting out to hard/densesoil complete all as specified and directed |
| 9 | Returning , filling in including spreading , levelling, watering and well ramming in layers not exec 25cm of soil complete all as specified and directed. |
| 10 | Removing of excavated material not exec 50 m and depositing where directed at a level not exec 1.5 m abovethe starting point complete all as specified and directed. |
| 11 | M&L for loose filling with broken brick aggregates of size 40 to 80 mm complete all as specified and directed. |
| 12 | M & L for cutting into or through brickwork/masonary works/cement concrete wall (any description) / enlarging existing openings for mounting DBs/ modular switchboards, etc and making good disturbed surfaces, complete all as specified and directed by Engineer-in-charge. |
| 13 | M&L for PCC 1:2:4 type B2 using 40mm graded aggregatesin foundation filling and mass concrete as in lean concrete as in PCC of foundation and Post. |
| 14 | M&L for cement concrete type C2 1:3:6(40 mm graded aggregate) in foundations, filling and mass concrete or for fixing of RCC/ angle post complete all as specified and directed |
| 15 | M&L cement concrete type D-2 (1:4:8) using 40mm graded aggregate as in foundations filling and mass concrete all as specified and directed |
| 16 | M&L cement concrete 1:3:6(Nominal mix)(using 40mm gradded aggregate) Type C2 as in surface channel and drains , finished concrete surfaces even and smoothusing extra cement complete all as specified and as directed by Engr-in-charge. |
| 17 | M& L for Plain Cement Concrete (1:3:6) Type C-1 using 20mm graded stone aggegate as in hold fast block, copping, filling in hollow door frame, bedblock, etc. |
| 18 | M&L providing cement concrete type B-1 (1:2:4) using 20mm graded aggregate as in benching, coping etc complete all as specified and directed |
| 19 | M&L providing precast cement concrete for manhole cover slabs and similar work type B-1 (1:2:4) using 20mm graded aggregate set in cement mortar (1:4) all as specified and directed |
| 20 | M&L Reinforced cement concrete Type B1 1:2:4 (20 mm graded aggregate)Slabs supported on walls, beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like |
| 21 | Supply only approved integral water proofing compound. |
| 22 | Supply and laying new dry river sand laid in trenches 8 cm below the cable and 15 cm above the cable and punned to 18 cm as cable cushioning and cover complete all as specified and as directed. |
| 23 | Supply and laying of brick well burnt locally available sub class \"B\" laid over sand cushioning for cable protection in trenches width of brick perpendicular to the length of cable, complete all as specified and directed by Engr-in-Charge. |
| 24 | M & L for brick work with sub class \"B\" old size brick straight or curved on plan exc 6m mean radius built in cement mortar (1:6) all as specified and directed. |
| 25 | M&L brick work with sub class B bricks straight or curved on plan exec 6m mean radius built in cm (1:4) all as specified and directed |
| 26 | M&L for brick work with sub class \"B\" bricks in one brick thick honey comb work built in cment mortar (1:4) all as specified and directed |
| 27 | Cutting chases,pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps cills, sunshades, shelves,lintels etc; and cutting chases for concealed water tubing and making good, cutting not exc.10cm girth. |
| 28 | M&Lfor Granite of thickness 16 to 18 mm (of any type) work (table rubbed and polishedin steps, jambs, pillars, window-cills, cooking platform sand like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to matchwith shade of granite, complete all as specified and as directed. |
| 29 | Use and wastefor formwork to soffits of suspended slabs suchas roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or slopingcomplete all as specified and directed |
| 30 | S&F Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick. complete all as specified and directed by Engr-in-charge. |
| 31 | S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as directed. |
| 32 | Taking down chowkats or frames with shutters n.exc 1.50Sqm (without taking off shutters from the frames). |
| 33 | All as per serial item No. 58 above but exc 1.50 Sqm and n.exc 4 Sqm each. |
| 34 | S/F, Solid PVC Wall Lining consisting of 5mm thickcoloured PVC sheet inclusive of solvent cement and preparing existing surface and fixing at site on as cupboard etc as specified and directed |
| 35 | S&F Factory made decorative lamination finish single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58- Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. . Note: (a) For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable.Variation in profile dimensions on plus side shall be acceptable but no extrapayment on this account shall be made.(b) The quoted rate shall be inclusive of required size and dia of M.S. hold fast/ lugs or SS dash fasteners. |
| 36 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture, proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. Note: (a) Stainless steel butt hinges and necessary S.S screws shall be paid separately |
| 37 | S/F 18mm thick Solid PVC Sandwich Panel with 1mm Plain PVC Sheet on both sides suitably fixed in M.S. angle frame work as per specification & drawing fixed as in shelving of cupboard etc |
| 38 | S&F150 mm length aluminum, anodised, barrel tower bolts of extruded section complete all as directed. |
| 39 | S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as directed. |
| 40 | S&FSS butt hinges 100mm size, medium weight cold rolled mild steel complete all as directed. |
| 41 | S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as directed. |
| 42 | S&F 100mm size of aluminum handles, cast type anodised complete all as directed. |
| 43 | S&F 125 mm size of aluminum handles, cast type anodised complete all as directed. |
| 44 | M&L for 100 mm longaluminium anodised Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified. |
| 45 | S&F repair tubular brass chromium plateddecorative 20mm curtain rod fixing with brackets complete all as specified. |
| 46 | S&F in repairstubular towel rail brass chromium plated , 20mm dia, 60cm longbetween flanges in repairs. Make- Prayag or equivalent. |
| 47 | S&F repairfancy type powder coated decorativecurtain rodbracket and holder for fixingcurtain rodcomplete all as specified. |
| 48 | S&F Floor door stopper of size 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor,complete all as specified and as directed. |
| 49 | S&F for stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steelwire staples. |
| 50 | S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed with stainless steelwire staples complete all as directed. |
| 51 | M&L for double action floor spring hydraulically regulated made up of min 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made up of brass, other parts made of mild steel heavy duty and fixed,complete all as specified and as directed. |
| 52 | S&FFramed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walkways; railings; framework of water tanksand similar work conforming to Fe.290.Gde-E-165 as specified and directed |
| 53 | M&L for Mild Steel work as in flat iron for fix the steel framework foreaves board and wind tie complete all as specified and as directed . |
| 54 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut,exc 5cm, n exc 10cm long and diameter of neck 16 to 20mm complete all as specified and directed. |
| 55 | S&F mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9mm dia and confirming to grade 410-Ocomplete all as specified and directed by Engr-in-charge. |
| 56 | M&L for mild steel bars deformed or twisted 10mm diaand over, cut to length, bent to shape required,including cranking, bending spirally for hooping forcolumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 57 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and directed(Gde-Fe-290 GdeE-165.) |
| 58 | M&L for MS work as in post,roof trusses (framed), trussed, purlins, (pipe/post,beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410 -W (Gde- E- 250) complete all as specified. |
| 59 | S& F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes all as specified and directed by Engr-in-Charge. |
| 60 | S&F of Pressed steel frames 125 x 60 mm size for doors with one or more rebates including necessary fixing lugs, hinges, lock striking plate etc. complete. |
| 61 | S&F GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flange of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange 26mm each withs lips of 10.5mm fixed to the intermediate chaneel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed. |
| 62 | S&F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified . NOTE: (The rate inclusive of scaffolding and necessary arrangements). |
| 63 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 64 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in ridge/flusing/eves board of width or girth not less than 600mm complete all asspecified and as directed. |
| 65 | Taking down rainwater pipes (anysize or pattern), including all fittings, heads, shoes, bends, swan-necks, etc.,removal to Store(measured overall as fixed along thecentre line over fittings andaccessories). |
| 66 | Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructionscomplete all as specified and directed. NOTE: (The rate inclusive of scaffolding and necessary arrangements). |
| 67 | M&L for roughening surface of old concrete floor by picking, sweeping cleam and washing down with water to remove dust etc all as specified and directed by Engr-in-Charge. |
| 68 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but notbacking), removing serviceable tiles to store and rubbish off the premises all as specified and directed by Engr-in-Charge |
| 69 | Taking down cement plaster of any description on brick or stone walls, Chajjas etc., including raking out joints, hacking for key, scrubbing down with water etc. |
| 70 | M & L Preparation of old wood and wooden based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint etc omplete all as specified and as directed. |
| 71 | M & L Preparation of old steel surfaces of any description not otherwise described over 10cm in width or girth and applying one coat of synthetic enamel paint etc |
| 72 | M&L preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and apply two coats of synthetic enamel paints over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 73 | S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15mm. |
| 74 | S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings(such as bends, elbows, Tee short pieces, connectors, back nuts, diminishing pieces, caps and plugs,unions etc.) of nominal bore 20mm. |
| 75 | Taking up or down steel tubing pipewith connections for cleaning for refixing or removing or storeyard complete of bore 15mm. |
| 76 | Taking up or down steel tubing with connections for cleaning for refixing or removing or storeyard complete of bore 20mm. |
| 77 | Dismantling PVC/cement water tank exc 500 ltrs but n exc 1000 ltr capacity and removing from MD land Complete all as specified and directed. |
| 78 | S & F rotational moulded polyethylene water storage tank white colour triple layered ( cylindrical vertical with closed top) hoisted and fixed in position of1000 liters capacity confiring to IS specification Complete all as specified and directed. |
| 79 | S&F in repair Fancy type pillar taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed as in repair. |
| 80 | S&F in repairs fancy type chromium plated 15 mm bore stop valve/angle cock cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions. |
| 81 | S&F in repair fancy type 15mm bore dia of conceled stop valves cast copper alloy screwed down high presure with crutch or butterfly handle screwed both ends for iron pipe or for unions. |
| 82 | S&FPVC (SWR) pipes single socketed 110mm bore dia in any lenth with rubber ring jointeds, laid in trenches or in floors. |
| 83 | S&FPVC (SWR) pipes single socketed 75mm bore dia in any lenth with rubber ring jointeds, laid in trenches or in floors. |
| 84 | S&F PVC (SWR) 110mm dia bend any raius all as specified and directed. |
| 85 | S&F PVC (SWR) 75mm dia bend any raius all as specified and directed. |
| 86 | S&F in repairs PVC (SWR) floor trap 75 mm, plain with CP grating including joining and solvent cement complete |
| 87 | S&F 50 mm dia low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm fixed complete to walls, ceiling or in floors etc including cutting, chasing, pinning and making floor good with existing one all as directed |
| 88 | S&F in repair HDPE pipes of pressure rating 6kgf/sqcm of 32mm bore for outlet pipe of WHB. |
| 89 | S&F in repair looking mirror 600mm x 450mm of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 90 | M&L Forming Contraction (Dummy) joints 65mm deep x 10mm wide,filled with sealing compound Grade A |
| 91 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-Chief. |
| 92 | S&F powder coatedaluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified and as directed. |
| 93 | M & L forMachine cut kota stone slab flooring 16 to 18 mm thick mirror polishing to give high gloss finish over cement screed bed 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specifed and as directed by Engr-in-charge. |
| 94 | M & L for 100 mm thick cement concrete (1:2:4) type B-2 ( using 40mm graded agg.) as in floor finishingsurface even and smooth without using extra cementwith contraction(dummy) joints etc complete all as specified and as directed. |
| 95 | M & L for 50mm thick cement concrete (1:3:6) type C-1 ( using 20mm graded agg.) as in floor finishing/Plinth protection cement concrete all as specified and diredted. |
| 96 | M&L Glazed ceramic coloured designer seamless tiles of premium quality of 450X300X7 mm thick on vertical surface as in skirting, dado setand jointed with neat cement slurry and pointed inwhite or colouredcementto match with the surface over and including 10mm thick screedin CM 1:3all as specified and directed by Engr-in-Charge. |
| 97 | M&L for coloured non skid ceramic tiles of premium quality 7 to 8mm thick (Square/rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) all as specified and directed by Engr-in-Charge. |
| 98 | M&L Vitrifiedtiles light shade double charge10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cementto match shade over and including screed bed 15mm thick in CM 1:6 all as specified and directed by Engr-in-Charge. |
| 99 | M&L Vitrifiedtiles light shade double charge 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, as on vertical surfaces etc.set and jointed in neat cement slurry and pointed in white or coloured cementto match shade over and including10mmthick screed in CM 1:3 all as specified and directed by Engr-in-Charge. |
| 100 | M&L liquior finish/glossy finish (pre-polished) Machine pressed precast concrete interlocking paver block rubber moulded laid with Grey cement and pigment any size and shape conforming to IS 15658-2006 of 60mm thick M-35gradeover and including 50 thick sand cushion etc complete all as specified anddirected by Engr-in-Charge. |
| 101 | M&L liquior finish/glossy finish (Pre-polished) chequered cement concrete tiles 30cm x 30cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floorsusing white cement and pigments including 20mm thick screed bed in CM 1:6etc (as in patches and as per site condition) as per design/pattern approved by AGE(I) etc complete all as specified anddirected by Engr-in-Charge.. |
| 102 | M&L for 15mm thick rendering in CM 1:4 with WPC brick/concrete surfaces fished even and smooth w/o using extra cement and with using water proofing compound by 3% of weight of cement complete all as specified and directed. |
| 103 | Material & Labour for 15mm thick rendering in Cement Mortar 1:6 on stone masonry surfaces, finished even and smooth without using any extra cement complete all as specified and as directed. |
| 104 | Material & Labour for 15mm thick rendering in two layer each of (10+5mm) thickCement Mortar 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on oneside of lathing with water proofing compoundfinished even and smooth without using any extra cement. (Note- Water proofing compound measured seperately) |
| 105 | M&L for preparation of newely plastered wall surfaces and applying two coats of Oil bound distemper over a coat of alkali resistant primer over 1mm wall care puttycomplete all as specified and as directed. |
| 106 | M & L for Complete removal of existing treatment of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efforescent salts, and trading oil and greasy spot by using suitable chemical & removing nails, making good holes with , filling cracks with birla white putty and brooming to remove all dirt etc and applying two coats of distemper over one coat of alkali resistant primer over 1mm wall care putty complete all as specified and as directed. |
| 107 | M&L for preparing of surfaces plastered or unplastered ceiling surfaces and applying two coats of Oil bound distemper over a coat of alkali resistant primer over 1mm wall care putty complete all as specified and as directed. |
| 108 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces.complete and including all necessary scaffolding,complete all as specified and as directed. |
| 109 | S&F 3.0 mm thick plain glass of selected quality and securing in metal / aluminium frame,complete all as specified and as directed. |
| 110 | S&F 5.5 mm thick plain glass of selected quality and securing in metal / aluminium frame,complete all as specified and as directed. |
| 111 | S&F in repair fancy type 15mm bore, chromium plated bib taps cast copper alloy with crutch or butterfly handle screwed down for iron pipe. |
| 112 | S&F in repairs sheet glass shelf/corner shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. |
| 113 | S&F in repairs CP soap dish complete all as directed |
| 114 | S&F in repair Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union alongwith arm 225mm and flange. |
| 115 | S&F in repairs vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including P or S trap(excluding flushing cistern and flush pipe) : |
| 116 | S&F in repairsVitreous China half stall urinals, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, magnum urinal spreader,pointing around urinal back in cement; flush pipe, grating and Union for discharge pipe,complete all as specified and as directed. |
| 117 | S&F in repairs PVC valve less syphonic action type flushing cistern low level white, dual flush, ISI marked (IS: 7231)with PVC inlet ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC long bend for squat pattern etc, set with concrete and making good to floor. |
| 118 | S&F in repairs Vitreous China Wash hand basinwhite Oval shape, size 580 mm x 450 mm size,excluding taps, chain & plug & porcelain stopper butincl brackets, 40/32 mm diachromium plate coupling 32 mm dia, cutting for and pinning ends of brackets or erecting stand complete all as specified and as directed. |
| 119 | M & L for galvanised light grade steel conduit of size 32 mm for laying cables in road crossings/drain crossings including necessary clamps/other accessories for laying the conduit along/across the drain, complete all as specified & directed by Engr-in-charge. Make - Jindal/Tata. |
| 120 | M&L for preparation of existing surface of walland applying one coat of acrylic exterior water proof emulsion paint (camouflage pattern as directed by Engr-in-Charge) complete and including all necessary scaffolding, complete all as specified and as directed. |
| 121 | Supply and fixing anti bird net of dia of 1 mm of square mesh size 25mmx25mm in black, machine made UV stabilized with boarder rope of high tenacity UV stabilized HDPE monofilament rope of Black colour with 4mm dia of boarder rope with UV stabilizer boarder rope jointed with net by machine interlocking processusing three twinces of the same as that of net tied to 12 mm dia hook (made to Shape) or welded to steel structure and 12 mm dia anchor fastener bolt fixed to RCC structure as applicable of suitable material complete and including all necessary scaffolding,complete all as specified and as directed. |
| 122 | Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm, 4 core as per IS 7098 incl. lugs/clamps to mount on walls/ ceiling/floors/other accessories necessary for installation, complete all as specified and directed by Engr-in-Charge. |
| 123 | Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm, 4 core as per IS 7098 incl. lugs/clamps to mount on walls/ ceiling/floors/other accessories necessary for installation, complete all as specified and directed by Engr-in-Charge. |
| 124 | Supply and fixing Steering wheel post top luminary LED type 40 W, 230 V AC outdoor type, aesthetically designed with symmetrical light distribution, made up of Pressure Die Cast aluminium body and opal PC cover,IP 65 protection, IK 07 impact rating and corrosion resistant complete with driver and lamp complete, pure polyester powder coated matt Grey finish after phosphochromate treatment and suitable for pole mounting with dia 76 mm, complete all as specified and directed by Engr-in-Charge.CAT REF Make : Havells SIMBOLPT40WLED or equivalent |
| 125 | M & L for 3 m height- aesthetically designed decorative hot dipped galvanised mild steel step pole with grey powder finish conforming to IS 4759:1996/ IS 2629:1985/BS 729/ equivalent. Poles to have two sections,top pipe (section) dia 76 mm, length 2 m, sheet thickness 2.9mm-3.2 mm and base pipe (section) dia 138.3 to 141 mm, length 1m, sheet thickness 3.2 to 3.4 mm andprovided with a suitable surface mounting mild steel base plate of Ø 268 mm with 4 no. elliptical holes of 20 x 42 mm on 210 mm PCD suitable for M12 anchor bolts, welded at the bottom of base pipe. Suitable elliptical service window - plasma cut & duly chamfered opening window of 300x110 mm with build-in junction box mounted with 4 pole terminal block for cable loop in/loop out connection and MCB back plate and window cover fitted with allen screws to the pole and decorative sleek casting ring to increase aesthetical appealincl. necessary RCC foundation as per height and its associated earthwork, anchored to foundation with anchor bolts/nuts/washers, etc., complete all as specified and directed by Engr-in-Charge.CAT REF Make : Havells 3 M 76 MM GI ECO Pole no. LSS LOG 0153 or equivalent |
| 126 | M & L of2.5 sqmm x 3 C, copper cable- PVC insulated, sheathed, 650/1100 V grade alongwith sleeves to enclose and insulate the cable for connecting LED flood lights incl. terminal block, complete all as specified & directed by Engr-in-Charge. |
| 127 | Supply and fixing amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of SP and current carrying capacity 6 AMP in the street light junction box complete with connection testing and commissioning, complete all as specified & directed by Engr-in-Charge. |
| 128 | S & F double compression copper stainless steel gland for fixing armoured cable in panel of size 4 core 25 sqmm Al cable. |
| 129 | S & F double compression copper stainless steel gland for fixing armoured cable in panel of size 4 core 10 sqmm Al cable. |
| 130 | Dismantling steel poles/struts, 12 m height complete all as specified and directed by Engr-in-charge |
| 131 | M&L for point wiring complete as specified with 1100 V grade with 1.5 Sq mm single core PVC insulated unsheathedFRLScable, copper conductor multistrandedpassing through includingPVC caping casing slotted 40/25/20 mm width on wall /Floor andceiling, alongwith concealed modular metal boxsuitable for logic modular switches , sockets , logic modular white plates, etcof suitable sizeas required atsitewith PVC insulated FRLSunsheathedstranded copper conductor of size 1.5 sq mmas earth wireconnected to common earthdolly as specified complete all as specified and directed for the following:- Note: - (i) Rate quoted shall include for cost of making modular metal box and concealed in wall including cutting and sinking of boxes and making good tothe walls (No extra payment will be made for the same)(ii) Provision of blank plates as per site requirement (No extra payment will be made for the same) |
| 132 | One light point / one fan pointcontrolled by one, one way switch with cable 1.5 Sqmm size. |
| 133 | One 3 pin socket outlet, 5 amps, independent, with cables 1.5 sq. mm size. |
| 134 | One 3 pin socket outlet, 5 amps on the same board with other switches, with cables 1.5 sq. mm size. |
| 135 | All as per ser item No. 1 herein before but with 4.0 SqmmPVC copper stranded cable FRLS type for one 15 Amp 5 pin socket outlet point, independent, including PVC cable 4.0 Sqmm FRLS type copper stranded conductor as earth wire as specified & connected to common earth & earth terminals including boards for mounting purposes. |
| 136 | Supply and fixing Switch modular type, single pole, one way, 5/6 Amp, one module, completes all as specified and directed. |
| 137 | Supply and fixingsocket outlet multipurpose having provision for 6 A-2/3 pin combined, two module complete all as specified. |
| 138 | Supply and fixing Switch modular type, single pole, one way, and 15/16 Amps, one module complete all as specified. |
| 139 | Supply and fixing socket outlet multipurpose having provision for 6/16 Amp-2/3 pin, combined 2 module completes all as specified and directed. |
| 140 | S&F White cover plate with frame,3 module |
| 141 | S&F White cover plate with frame,4 module |
| 142 | S&F White cover plate with frame,6 module |
| 143 | S&F White cover plate with frame,8 module |
| 144 | S&F ceiling rose of size 65 x 50 mm surface bakelite 240 Voltsthree terminal as specified and directed. |
| 145 | Supply and fixing LED luminaire 600 mm x 600 mm, 40 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size completeall as specified and as directed by Engr-in-charge. |
| 146 | Supply and fixing LED lights fitting 1x 20W, 230V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 147 | Supply and fix ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Minimum air delivery 245 cfm with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed by Engr-in-Charge. |
| 148 | S & F of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amp MCB, 240 V complete all as specified and as directed. |
| 149 | S & F VTPN distribution board with provision of MCCB as incommer,double door suitable for mounting MCB\"s/Isolators of240 Volt rating - 4 way with built in 63A rated bus bar and without MCCBcomplete after taking down old unserviceable DB\"s and including making good the distrubed surface and matching with existing colour complete all as specified and as directed. |
| 150 | Supply and fixing MCB rating 240V, 10KA \"C\" curve of SP 6 to 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning. |
| 151 | S & FMCCB, 4P, 63 A, 415 V, 50 Hzwith rupturing capacity of 16KA complete all as specified and as directed. |
| 152 | M&L for submain wiring with 2X4.0 SQMM+1X4.0SQMM Earth Wire single core PVC insulated FRSL sheathed cooper cableconnecting to common earth dolly in and including heavy duty PVC Concealed Conduit as per site requirement and direction by EIC, all accessories complete all as specified and directed.(SPN DB to Switch Board) |
| 153 | M&L in repair for submain wiring with 2X6.0 SQMM+1X6.0SQMM Earth Wire single core PVC insulated FRSL sheathed cooper cableconnecting to common earth dolly in and including heavy duty PVC Caping casing as per site requirement and direction by Engr-In-Charge, all accessories complete all as specified and directed. |
| 154 | M&L for earthing complete with galvanised steel earth plate electrode 600x600x 6mm thick burried in ground (earth pit not less than 2.25 m deep below ground level with top edge of the plate not less than 1.5 m below normal ground level, connected to earth lead wire 4.0mm dia as earthing lead by means of bolts, nuts, check nuts, and washers of GI or steel, GI strip protected by 40 mm bore medium grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade GI, wire mesh charcoal or coke common salt laid in altrnative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC(1:3:6) type C-1, 50 mm thick pre-cast RCC(1:2:4) type B-1 normally mix cover slab reinforced with in 8 mm dia TMT bar 10 cm C/C both ways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft/loose/hard soil and disposal of soil to a distance n.exc 50 m and necessry testing on completion all as shown in electrical plate No 3 MES schedule part-I complete all as specified and as directed. |
| 155 | Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire |
| 156 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materialsfor taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as specified and as directed. |
| 157 | Supply and fixing ceiling fan/exhaust fan condenser 2/2.5/3.15 Mfd |
| 158 | Supply & Fixin repair stepped type 5 step electronic fan regulator, one module, suitable for 1200/1400 mm sweep ceiling fan as reqd all as specified and as directed by Engr-in-Charge. |
| 159 | S & F of LED Flood Light70 W, 230 V AC outdoor type with thermal management in multiple optics and equipped withIP 66 protection, with impact and corrosion resistant complete with driver and lamp bracket, complete all as specified & directed by Engr-in-Charge. |
| 160 | Schedule of Credit |
