|
| 1 | Surfing Board Providing and fixing of Surfing Board of size not less than l000mm (Length) x 600mm (Width) x 1400mm (Height), to build up the muscle groups of the waist, enhance the body coordination and flexibility. The main structure frame shall be made from G.I. pipe minimum of 80NB ‘C\" class welded with MS round base plate atleast Ø250 mm & 10mm thick The footrests shall be made from high quality fiber reinforoed plastic material. High tensile steel with galvanized nut bolts shall be used for assebly.The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/ Nerolac with minimum 60 to 70 micron thickness, complete in all impect including fixing the M.S. holdfast in cement concrete to hold the whole structure,under the directions of Engineer-in-charge to fullfil the functional requirement. Theindicative Design & Photo is as per enolosed Photo coloum 08. |
| 2 | CROSS TRAINER Providing and fixing of Cross trainer of size not less than 1320mm (Length) x 600mm (Width) l750mm. (Height), to enhance the mobility of upper and lower limbs and improve the fiexibility of joints. The main structure frame shall be made from G.1 . pipe minimum of 80N \"C\" class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The Hand Frame shall be made up of atleast 25NB \"C\" ClassG.I. Pipe. The footrmts shall be made frem Aluminum casting material of size not less than 130 mm X 3l0mmX5mm thickness a mounted on M.S. Plate of Size 130mmx310mmx3mm thick. High tensile steel with galvanic [3:23 pm,25/02/2022]Parsoon: nuts and bolts shall be used for assembly.[3:32 pm, 25/02/2022] Parsoon used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/ Nerolac with minimum 60 to 70 micron thickness, complete in all impect including fixing the M.S. holdfast in cement concrete to hold the whole structure,under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative DesignfPhoto is as per enolosed Photo coloum 08.(The cement coocrete and excavation work shall be paid separately). |
| 3 | THAI-CHISPINNER (2 WHEEL) Providing and fixing of Thi-Chi spinner (2 Wheel) of size not less than 700mm (Length) x l000mm (Width) x 1280mm (Height), to increase mobility of shoulder -elbow and hip-knee. The main structure frame shail be made from G.l . pipe minimum of 80NB \"C\" class welded with M.S. round base plate atleast Ø250 mm & 10mm thick. High tensile S.S. nut hus shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/ Nerolac with minimum 60 to 70 micron thickness, complete in all impect including fixing the M.S. holdfast in cement concrete to hold the whole structure,under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative DesignfPhoto is as per enolosed Photo coloum 08. |
| 4 | LEG PRESS Providing and fining of Leg Press of sinn not les than l840mm (Length) x 360inm (Width) x l560mm.(Height), to build up the musclec of tfiigh and enhance the strength of waist. The main structure frame shall be made from G.l. pipe minimum of 80NB \"C\" class welded with M.S. round base plate atleast Ø250 mm & l0mm thick. The seamless frame minimum of 100 OD and of M.S. Seamless Pipe with thickness 5mm. This sleeve should be disassembled from main fråme. The footrests shall be made from cested Aluminum møterial, having sizes minimum of l30mm X 3l0mm X 5mm thick. Closing Caps shall be made up of high quaiity riber reinforced Plastic materiai. High tensile steel with gaivanized nut bolts shall be used for assembly.The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/ Nerolac with minimum 60 to 70 micron thickness, complete in all impect including fixing the M.S. holdfast in cement concrete to hold the whole structure,under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative DesignfPhoto is as per enolosed Photo coloum 08. (The cement coocrete and excavation work shall be paid separately). |
| 5 | CHEST PRESS Providing and fixing of Chest Press of size not less than 2000mm (Length) x 7I0mm (Width) x 2200mm. (Height), to enhance the strength of upper limbs and the muscles in chest & back and promote cardio pulmonary function. The main stnicture frame shall be made fromG.I. pipe minimum of 80NB “C\" class welded with MS round base plate atleast 250 mm & l0mm thick. The handle frame shall be made up from atleast 32NB \"C\" class G.I. pipe. The seats and Back rests to be fitted on the outer frames shall be made up of M.S. Sheet of size not less than 330mm X 300 mmX2mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powders of Ackzonoble Berger/ Nerolac Paints with 60 to 70 micron thickness, complete in all respect including fixing the M.S. holdfast in cement concrete to hold the whole stiucture, under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative Design/Photo is as per enclosed coloum 08 |
| 6 | POMMEL HORSE Providing and fixing of Pommel Horse of size not less than 2 150mm (Length) x 800mm (Width) x 800mm. (Height), to enhance the flexibility of lower limbs. waist and abdomen. The main structure frame shall be made from G.I. pipe minimum of 80NB -\"C\" class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The handle frame be minimum of \"32NB\" shall be made fiom \"C\" Class G.L pip Closing Caps shall be made up of high quality Fiber reiidbrced Plastic material. High tensile steel with galvanizml eels and bolts small be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/ Nerolac with minimum 60 to 70 micron thickness, complete in all impect including fixing the M.S. holdfast in cement concrete to hold the whole structure,under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative DesignfPhoto is as per enolosed Photo coloum 08.(The cement coocrete and excavation work shall be paid separately) |
| 7 | DOUBLE STANDING TWISTER Providing and fixing of Seating & Standing Twister of size not less than1500mm (Length) x 600mm (Width) x 1300mm. (Height), to enhance flexibility of waist. suitable for people of different ages except children. The main structure frame shall be made from G.I. pipe minimum of 80NB \"C\" class welded with M.S. round base plate atleast 0250 mm & 10mm thick. The Twister plate to be fitted on the bottom fmme shall be made up of M.S. Round Plate of minimum size 300mm diameter and l0mm thickness. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts &bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/ Nerolac with minimum 60 to 70 micron thickness, complete in all impect including fixing the M.S. holdfast in cement concrete to hold the whole structure,under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative DesignfPhoto is as per enolosed Photo coloum 08.(The cement coocrete and excavation work shall be paid separately) |
| 8 | PUSH UP BAR Providing and £xing of Push Up Bars of size na lms (Length) x 550mm (Width) l700mm. (Height), To enliance and stamina of the body. The main stnictum frame shall be made fromG.I. pipe minimum of CONB \"C\" class welded with M.S. round base plate at least 0250 mm & l0mm thick. The handle frame minimum of 25 NB shall be made from \"C\" Class G.I. pipe. Closing Caps shall be made up of high quality Fiber reinforced Plastic material. High tensile steel with galvanized nuts & bolts shall be used for assembly. The powder coating shall be done with Pure Polyester powder of Ackzonoble/ Berger/ Nerolac with minimum 60 to 70 micron thickness, complete in all impect including fixing the M.S. holdfast in cement concrete to hold the whole structure,under the directions of Engineer-in-charge to fullfil the functional requirement. The indicative DesignfPhoto is as per enolosed Photo coloum 08. Please Enable Macros to View BoQ information |
