|
| 1 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead |
| 2 | 12 mm cement plaster with cement mortar in proportion 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers and rounded angles not exceeding 80 mm in girth and finished even smooth .thick plaster mix 1:4 (1 cement :4 coarse sand) etc |
| 3 | Scrapping old white colour wash including disposal of refuse as directed by engineer in charge with in a distance of 60 metres |
| 4 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 5 | One priming coat & two coat oil distemper on new work including supply of aof all materials ,labour and T& P etc. required for proper completion of the worknew work |
| 6 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 7 | Supply and fixing of flush doors, commercial quality conforming of 1.S. 2202 part-1 (1983) including ISI marked oxidized iron fitting with screws, Bolt Hinges, Handles, Siliding bolt, Door Stopper and tower bolt etc. 35 mm thick |
| 8 | Supply and fixing of 4cm (3/2\") thick C.P. Teak wood door and window shutters with panels of heavy quality galvanized iron wire gauge 2.5min or 2mm or 1.5mm (1/10 or 1/12 or 1/6 inch) mesh or any other size with necessary beading including supply and fixing of wooden cleats and stops and including fixing and adjustment of hinses, bolts, locks, handles, springs and/or other fitting but excluding their supply and including painting with two coats of Black Japan on all iron fittings if necessary. Fitting with necessary screws to be supplied departmently |
| 9 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
| 10 | Providing and fixing to existing door frames.30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. |
| 11 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets : 20 mm dia (heavy type) |
| 12 | Two coat oil distemper on old work including supply of aof all materials ,labour and T& P etc. required for proper completion of the work |
| 13 | Painting on iron works in small areas in old steel work with one coat ready mixed priming paint and two coat of approved superior quality ready mixed paint including supply of all materials labour T & P etc.Required for proper completion of the work. |
| 14 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) laid in one layer finished with a floating coat of neat cement, etc. complete. 40 mm thick with 20 mm nominal size stone aggregate |
| 15 | Providing and laying Vitrified tiles in floor without lean concrete of 600x 600mm sizes (thickness 10mm), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, including grouting of joints. |
| 16 | Providing and laying Ceranie glazed floor tiles of size 300x300 (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement 4Coarse sand), Jointing with grey cement slurry @3.3 kg/spm including pointing the joints with white cement and matching pigment etc., complete. |
| 17 | Providing and fixing 110 mm dia pvc pipe for rain water supply including necessary T&P and as per incharge . |
| 18 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 15 mm nominal dia Pipes |
| 19 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 20 mm nominal dia Pipes |
| 20 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal dia Pipes |
| 21 | Providing and fixing brass bib cock of approved quality : 15 mm nominal bore |
| 22 | Providing and fixing PTMT stop cock of approved quality and colour Concealed stop cock, 15 mm nominal bore, 108 mm long, weighing not less than 108 gms |
| 23 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball . 20 mm nominal bore, 120 mm long, weighing not less than 198 gms |
| 24 | Providing and fixing uplasticised PVC connection pipe with brass unions. 45 cm length 15 mm nominal bore |
| 25 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 26 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete . Flexible pipe 32 mm dia |
| 27 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 28 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 29 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 30 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank . |
| 31 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and f inally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge”: With average thickness of 120 mm and minimum thickness at khurra as 65 mm |
| 32 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore |
| 33 | First class brick work in 1:4 cement and coarse sand of 1.25 F.M. mortar in foundation plinth including supply of all materials ,labour and T& P etc. required for proper completion of the work. |
| 34 | Excavation in foundation in ordinary soil (loam clay, or sand) including lift upto 1,5 metre and lead upto 30 m & including filling, watering and ramming of excavated earth into the trenches or into the space bwtween the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer in charge of 30 m from the foundation trenches. |
| 35 | Providing, laying , spreading and compacting 22.4-53 mm stone aggregates of specific size to water bound macadam specification including spreading in uniform thickness, hand packing rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber applying brooming stone screening/binding materials to fill up the interstices of coarse aggregate watering and compacting to the required density grading 3 as per Technical specification clause 405. |
| 36 | Providing and Laying of interlocking concrete block pavement having thickness 80mm as per drawings and techical specification Clause 1504(Excluslve G.S.B)Mord 1500(6.7) |
| 37 | Concretc with 4cm gauge brick ballast garse sand and cement in proprotion 12:6:1 in foundation and under floor including supply of all materials labour T & P etc.required for proper completion of the work . |
| 38 | R.C.C. work with cement approved coarse sand and 2 cm gauge approved stone ballast in the proportion of 1:1.5:3 in in lighter beam ,i.e. havings span upto 6 m. excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B,W.G.G.I. binding wire and including necessary crentering & shuttering etc. and also including supply of all material labour and TSP etc. required for proper completion of the work, binding wire cost being included in the item. |
| 39 | R.C.C. work with cement approved coarse sand and 2 cm gauge approved stone ballast in the proportion of 1:1.5:3 in in slabs . excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B,W.G.G.I. binding wire and including necessary crentering & shuttering etc. and also including supply of all material labour and TSP etc. required for proper completion of the work, binding wire cost being included in the item. |
| 40 | R.C.C. work with cement approved coarse sand and 2 cm gauge approved stone ballast in the proportion of 1:1.5:3 in lintels of doors and window excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B,W.G.G.I. binding wire and including necessary crentering & shuttering etc. and also including supply of all material labour and TSP etc. required for proper completion of the work, binding wire cost being included in the item.for slabs N.S. |
| 41 | R.C.C. work with cement approved coarse sand and 2 cm gauge approved stone ballast in the proportion of 1:1.5:3 in R.C.C column. excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B,W.G.G.I. binding wire and including necessary crentering & shuttering etc. and also including supply of all material labour and TSP etc. required for proper completion of the work, binding wire cost being included in the item. |
| 42 | Cement Concretc with 2cm gauge approved stone ballast coarse sand and cement in proprotion 1:2:4 including supply of all materials labour T & P etc.required for proper completion of the work . |
| 43 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (two or more coat applied @ 1.67 ltr/10 sqm). sqm |
| 44 | Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. |
| 45 | Mild Steel or iron in plain work such as reinforced concrete or reinforcement brick work (when not included in an over all rates) wrought to required shape as necessary including benefit for proper completion fo the work and including supply of all steel and wastage and over lappign and hooks. |
| 46 | 15 mm cement plaster with cement mortar in proportion 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers and rounded angles not exceeding 80 mm in girth and finished even smooth .thick plaster mix 1:4 (1 cement :4 coarse sand) etc |
| 47 | Supply & filling of brick bats sor knp chp 01 s.i.2©. |
| 48 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 49 | Painting or vanishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & coat of approved superior quality ready mized paint of clear synthotic varnish Including supply of all materials, labour and T & P etc, required for proper complotion of work. Paint to be used should confirm to ISI . |
| 50 | Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 coarde sand).including chipping of rcc surface before plaster |
| 51 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) |
| 52 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (including equivalent design mix) |
| 53 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 54 | Providing GI barbed wire fencing (Hot Dip) Iron wire fencing in three rows including fixing it to post after streching it including labour tools andplants required for proper completion of the work also including supply of wires 14x14 swg with 100 mm barb spacing @11.66 m per kg wt. and excludingg supply of post |
| 55 | Providing, laying , spreading and compacting 45-63 mm stone aggregates of specific size to water bound macadam specification including spreading in uniform thickness, hand packing rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber applying brooming stone screening/binding materials to fill up the interstices of coarse aggregate watering and compacting to the required density grading 2 as per Technical specification clause 405.G-2 |
| 56 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: Asbestos Cement sheet |
| 57 | Supply and fixing 6 mm thick grey corrugated asbestos sheet in roofing including supply of all materials labour T & P etc.Required for proper completion of the work and including wastage. |
| 58 | Supply and fixing ridges valley and gutters fixed with J and U bolts 10 mm dia with g 1 limpet and bitumen washers complete including supply of all materials labour T & P etc.Required for proper completion of the work and including wastage. |
| 59 | Dismantling steel workmanually by mechanical means in built up sections without dismembering and stcking within 50 metres lead as per direction of Engineer in charge. |
| 60 | Relaying of brick soling layer on prepared sub grade with brick on end edging according to lines ,graded and cross section shown on the drawing filling joints with sand and earth , spreading 25 mm thick layer of earth over brick soling watering and rolling same with three wheel road roller 80-100 kn as per technical specification . |
| 61 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 62 | M.S. or iron work in small sizes and section such as holding down bolts,hold fasts ,theods grading etc.wrought to required from including supply to steel bolt ,nuts wastage etc. and their fixing required for proper completion of thework but in heavy sizes such as trusses built up gates record rack roof work gates etc including rivetting and welding where necessary. |
| 63 | R.C.C. work with cement approved coarse sand and 2 cm gauge approved stone ballast in the proportion of 1:1.5:3 in in slabs . excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B,W.G.G.I. binding wire and including necessary crentering & shuttering etc. and also including supply of all material labour and TSP etc. required for proper completion of the work, binding wire cost being included in the item. For slabs 283 |
| 64 | Desilting and cleaning of covered SW drain in or under foul conditions including removal and refixing of cover and collection of garbage to nearest dustbin including all t& p safety measures etc. complete as per the direction of engineer in charge .(Nature of work is similar to excavation of soil ,so used excavation rate ) |
| 65 | CEMENT CONCRETE PAVEMENT(C.C ROAD) construction of un-reinforced plain cement concrete pavement thickness as per design, over a prepared sub base with 43 grade cement or any other type as per clause 1501.2.2 M 30 (grade) coarse and fine aggregates conforming to IS 383 maximun size of coarse aggregate not exceeding 25mm mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side fromwork (steel channel laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing). spreading the concrete with shovels, rakes compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, admixtures as approved curing concrete slabs for 14 days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 (approved Quarri grit) |
| 66 | Providing and fixing of G.I. pipes complete with G.I. fittings and clamps including making good thewall etc. concealed pipe including painting with anti corrosive bitumastic pipe including painting with anti corrosive bitumastic paint ,cutting chases and making good the wall.15 mm nominal dia Pipes |
| 67 | 20 mm nominal dia Pipes |
| 68 | Boring 150 dia bore hole including t & p etc. required for proper completion of the work . |
| 69 | Lowering 110 mm dia mm pvc pipe in bore hole including t & p etc. required for proper completion of the work . |
| 70 | P/F 100 mm dia PVC pipe 6 kg/cm sqm. |
| 71 | Shrounding and packing graded coarse sand in bore wall & the strainer including supply of coarse sand and labour t & p etc required for proper completion of the work. |
| 72 | P/F G.I. pipe 32 mm dia nominal bore complete with G.I. fitting |
| 73 | Submersible pump kirloskar/ crompton or equivalent 1.5 HP ISI |
| 74 | Single phase starter for submersible of isi marked |
| 75 | 2.5 mm sq. cable for submerssible motor pump . |
| 76 | 4 inch dia MS clamp made with 32*5 mm flat iron nut & bolt |
| 77 | 100 mm dia & PVC endcamp |
| 78 | Solution for jointing PVC Pipe 250 gm. |
| 79 | 32 mm cvpc pipe |
| 80 | Developing of bore well by over pumping and back washing till the discgarge is free from turbidity greater than 20 ppm after 20 min of starting of pump including hiring charges of pupm set labour T & P complete required for proper completion of the work . |
| 81 | Nylon cloth for strainer including plastic rope ,cutting holes in pvc pipe etc complete |
| 82 | Maintenance of bituminous surface road and gravel or WBm road including filling pot holes and patch repair etc.restoration of rain cuts and dressing of side slop standing tree at adjacent to road wherever cutting of branches of tree, shurb and trimming of grass and weeds etc mentioned in GO No. 55 12022/187/23-9-2022-02 Nabard / 2021 Dt 28.04.20022 & Enc lettere no 14 BDD-1 (NH)/40 MT-11/ 2024dated 03.01.2024 subjected to approval from Govt. Maintence of Ist year after completion of work @ Zero % of total work amount of Maintainance of first Year (@ 0.00% of Total Work Amount of PC Area) |
| 83 | Maintainance of Fourth Year Total work amount of Pc work |
| 84 | Maintainance of Fifth Year Total work amount of Pc work Please Enable Macros to View BoQ information |
