Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Lump sum price worked out by the tenderer for“BUILDING WORK\" as listed in Schedule ‘A’ Part - I |
| 2 | Subtotal |
| 3 | Lump sum price worked out by the tenderer for“INTERNAL ELECTRIFICATION WORK\" as listed in Schedule ‘A’ Part - II |
| 4 | Subtotal |
| 5 | Lump sum price worked out by the tenderer for“INTERNAL WATER SUPPLY WORKS\" as listed in Schedule ‘A’ Part - III |
| 6 | Subtotal |
| 7 | Lump sum price worked out by the tenderer for“ROAD , PATH & CULVERTS WORKS\" as listed in Schedule ‘A’ Part - IV |
| 8 | Subtotal |
| 9 | Lump sum price worked out by the tenderer for“AREA DRAINAGE WORKS\" as listed in Schedule ‘A’ Part -V |
| 10 | Subtotal |
| 11 | Lump sum price worked out by the tenderer for“SEWAGE DISPOSAL WORKS\" as listed in Schedule ‘A’ Part VI |
| 12 | Subtotal |
| 13 | Lump sum price worked out by the tenderer for“COMPOUND WALL, SECURITY WALL & GATE WORKS\" as listed in Schedule ‘A’ Part -VII |
| 14 | Subtotal |
| 15 | Lump sum price worked out by the tenderer for“EXTERNAL WATER SUPPLY\" as listed in Schedule ‘A’ Part -VIII |
| 16 | Subtotal |
| 17 | Lump sum price worked out by the tenderer for“SUMMER APPLIANCES WORKS\" as listed in Schedule ‘A’ Part -IX |
| 18 | Subtotal |
| 19 | Lump sum price worked out by the tenderer for“SITE CLEARANCE & DEVELOPMENT, EXCAVATION AND EARTHWORK WORKS\" as listed in Schedule ‘A’ Part -X |
| 20 | Subtotal |
| 21 | Lump sum price worked out by the tenderer for“RAIN WATER HARVESTING WORKS\" as listed in Schedule ‘A’ Part -XI |
| 22 | Subtotal |
| 23 | Lump sum price worked out by the tenderer for“HOT WATER SUPPLY WORKS\" as listed in Schedule ‘A’ Part -XII |
| 24 | Subtotal |
| 25 | Lump sum price worked out by the tenderer for“EXTERNAL ELECTRIC SUPPLY WORKS\" as listed in Schedule ‘A’ Part -XIII |
| 26 | Subtotal |
| 27 | Lump sum price worked out by the tenderer for“AIR CONDITIONING WORKS\"as listed in Schedule ‘A’ Part -XIV |
| 28 | Subtotal |
| 29 | Lump sum price worked out by the tenderer for“LIGHTENING PROTECTION WORKS\"as listed in Schedule ‘A’ Part -XV |
| 30 | Subtotal |
| 31 | Lump sum price worked out by the tenderer for“MECHANICAL LAUNDRY WORKS\"as listed in Schedule ‘A’ Part -XVI |
| 32 | Subtotal |
| 33 | Lump sum price worked out by the tenderer for“MISCELLANEOUS WORKS\"as listed in Schedule ‘A’ Part -XVII |
| 34 | Cutting existing DI water pipe line 200 mm bore and inserting of flanged Tee 200x200x200 mm - 01 Nos with flanged socket 200 mm - 02 Nos, and jointing with rubber gasket, nut bolt etc. and making leak proof joint complete and making new connection with 200 mm DI water pipe line.Note:- Rate encludes the cost of cuttings of pipe, jointing of pipe and jointing material i.e. rubber gaskets, nut bolts, washer etc, and DI special fittings as required complete. |
| 35 | Supply and lay Centrifugally cast (Spun) Ductile Iron pressure pipe with spigot & socket end, class K-9 conforming to IS:8329/2000 suitable for (push on) rubber gasket jointing with centrifugally applied inside cement mortar lining and external zinc coating with a finishing layer of black bitumen coating on external surfaces, size 200 mm (8”) dia including jointing material i.e. ethylene propylene diene monomer (EPDM) rubber gasket conforiming to IS: 5382 of bulb type complete as specified and directed by Engr-in-charge. |
| 36 | Supply and lay Centrifugally cast (Spun) Ductile Iron pressure pipe with spigot & socket end, class K-7 conforming to IS:8329/2000 suitable for (push on) rubber gasket jointing with centrifugally applied inside cement mortar lining and external zinc coating with a finishing layer of black bitumen coating on external surfaces, size 100 mm (4”) dia including jointing material i.e. ethylene propylene diene monomer (EPDM) rubber gasket conforiming to IS: 5382 of bulb type complete as specified and directed by Engr-in-charge. |
| 37 | M&L for Construction of brick masonry valve pit of internal size 90cm x 90cm x 90cm including necessary excavation and earth work in soft/loose soil, brick work,plastering, white wash, PCC coping, MS frame made out of angle iron of size 40mmx40mmx6 mm, MS sheet cover of 3 mm thickfixed to angle iron frame by means of hinges welded to frame and painting with 2 coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces and grouting the frame in PCC 1:2:4 type B-1 including handle and locking arrangement with one number 50 mm dia brass pad lock, complete all as specified and directed by Engineer - in - ChargeNote:-(i)Brick wall shall be 23 cm thickbuilt incement mortar (1:4) (ii)Internal plaster shall be 15 mm thick in cement mortar (1:4) and external plaster upto 450mm from top shall be 20mm thick in CM (1:6) and remaining external surface shall be flush pointing in CM (1:6) as the work proceeds.(iii)PCC in foundation shall be 15 cm thick in cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate extended 15 cm all around from the external face of the walls. (iv)PCC coping shall be 15 cm thick in cement concrete ( 1:2:4) type B-1 using 20 mm graded stone aggregate including grouting of angle iron frame in PCC. (v)Two coats of white wash to internal surfaces of valve pit.(vi) Depth of wall pit shall be reckoned from the top of PCC in foundation. |
| 38 | All as per above item but valve pit with internal size 120 mm x 120 mm x 120 mm |
| 39 | DI fittings, class K-12, confirming to IS-9523-2000 suitable for spigot & socketed pipes such as bends (any type, radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc), tee pieces, single branch, \"Y\" junction, double branch, cross collar, caps and plugsetc. suitable for spigot and socketed pipes upto 200 mm bore complete all as specified and directed by Engineer-in-charge. |
| 40 | S&F desert cooler made of pvc body, aluminium fan blade, wood wool pads, electric driven single phase, 230 volt AC, having minimum nominal air flow capacity of 5000 Cubic meter per hour with 280 watt copper wounded motor, tank capacity 100 ltr and water submersible pump (IS:11951) with 1.5 mtr head complete specified and directed. |
| 41 | Supply and fix refrigerator, electric driven (single phase), Single door, capacity not less than 286 Litres. Minimum 5 star rated, frost free, complete. |
| 42 | Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled, copper wounded, indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 3 KVA |
| 43 | S&F Inermi Hedge boundary plantationtrees , 1 to 3 feet plants including 1 years old. Digging pit required size, filling with manure pesticides including removing surplus soil to a distance not exc 250M. |
| 44 | Supplying following plants of 2 feet to 3 feet in heightin polybag if 10\"\" to 12\"\" height and Planting of avenue trees of approved species as per direction incl excavation of pits of required size and depth in all types of soil and back fill approved black cotton/Fertile soil after soil treatment with chemical and fertilizer, incorporating manure of approved quality in the proportion of 1:3 (One part of manure & 3 part of soil) manure 200 gm per plant and using pesticides of approved quality etc and removing surplus soil to a distance n.exc 1.50 Km and depositing where directed. |
| 45 | (i) Pink/Red Rose |
| 46 | (ii) Bougainvilla |
| 47 | (iii) Palm Tree |
| 48 | (iv) Ashoka Potala Tree |
| 49 | (vi) Neem Tree |
| 50 | (vii) Sheesham Tree |
| 51 | (viii) Tecoma Yellow |
| 52 | (ix) Bottle Brush |
| 53 | (x) Madhu malti |
| 54 | (xi) Cassia Biflora |
| 55 | (xii) Calliandra |
| 56 | (xiii) Mulberry tree |
| 57 | (xiv) Astonia tree |
| 58 | (xv) Amla tree |
| 59 | (xvi) Gulmohar tree |
| 60 | (xvii) Phicus creepers |
| 61 | (xviii)Kinoo |
| 62 | (xix) Nibbu desi |
| 63 | (xx) Champa white |
| 64 | (xxi) Rat ki rani |
| 65 | M/L for laying of lawn selection No 1 grass in mat finisgh in either direction including digging of lawn/preparation of lawn area as requireddepth breaking go clods, removal of store etc. mixing of vermi compost @3Kg/Sqm and insecticides, mixing in all, leveling, wateing and cutting and dressing till the grass formas a thick lawn free from weeds and fit for mowing complete all as specified and directed. |
| 66 | Maintance of plant/hedge grassby weeding, hosing, watering, saucer makingonce in 15 days (every month in alternaate day ) forplant/ hedge, insect and pest management (as and when required ), as directed by Engineer-in-Charge pruning new plants in place of dead plants of same species and height tunining with out extra cost to the department complete all as specified and as directed by Engineer -in-charge. (Note Manure & pesticide required for maintenance of plant under this item shall be arranged by the contractor at his own cost and cost of the same shall be deemed to included in the rate quoted against this item) |
| 67 | Supply ofAir cooledHeatPumpdeliveringactualcapacityasper the following parameters. Heat pump shall be rated at Nominal Input Power -200 Wattwith Output Heating capacity - 8KW,Electrical Backup - 2.2 KW having Inbuilt Tank capacity - 450 litres having glass lining. Water Temp in efficiency mode using compressor should be65 degree C. Heat pump should have all the safety protections like high/low voltage , high temperature, refrigeratnt leak, compressor overheting protection with operational noise level not more than 60 dbA. Heat pump should have a user freindly control panel to set the desired temperature showcasing the actual temp |
| 68 | Supply ofAir cooledHeatPumpdeliveringactualcapacityasper the following parameters. Heat pump shall be rated at Nominal Input Power -200 Wattwith Output Heating capacity - 5.40 KW,Electrical Backup - 2 KW having Inbuilt Tank capacity - 80 litres having glass lining. Water Temp in efficiency mode using compressor should be65 degree C. Heat pump should have all the safety protections like high/low voltage , high temperature, refrigeratnt leak, compressor overheting protection with operational noise level not more than 60 dbA. Heat pump should have a user freindly control panel to set the desired temperature showcasing the actual temp |
| 69 | Supply, testing, commissioning and installing outdoor type compact substation consisting following: -(A) HT SWITCHGEAR: - 11 kV 630 Amps, 21 KA for 03 Sec Non-Extensible Ring Main Unit with metering Panel Compact Switchgear consisting of one number Vacuum Circuit Breaker in SF6 insulated stainless steel enclosure, with series trip, self-powered microprocessor based numerical over current relay (IDMTL + Inst) protection, earth fault protection and thermal overload relay for transformer. Interconnection between HT switchgear and transformer shall be using 1 core x 3 x 95 sqmm aluminium unarmoured XLPE cable(B) Transformer Section:- mineral oil immersed, natural air-cooled, outdoor type, double wound (copper) distribution transformer, three phase, 630 kVA rating, non-sealed type, 50 Hz rated frequency, 11 kV high voltage and 415 V low voltage nominal system voltage, minimum 75 kVp basic insulation level, 11000 V/ 433-250 V no-load voltage ratio, connection (vector) symbol Dyn11, 30⁰ positive phase displacement, off circuit tap changing arrangement for voltage variations of +5% to -10% in steps of 2.5% for variation of HV, minimum energy efficiency level 2 (Star 2 as per the notification issued by the Central Government, in consultation with the Bureau of Energy Efficiency and including all the amendments issued up-to-date), 4.5% impedance, ONAN type cooling all as per IS-1180 (Part 1): 2014 including amendment upto and including amendment No. 4 dated 04 Mar 2021 complete with all fittings, accessories and item as specified and as directed. Note: - The energy efficiency level higher than the minimum energy efficiency level as specified here shall be provided without any extra cost in case the transformer of minimum energy efficiency level is not available. |
| 70 | (C) Low Voltage Switchgear: - 1250 A Aluminium Bus Bar, LT ACB (Air Circuit Breaker) Incomer 415 V, 1000 Amps, 4P, 50 KA, fixed ACB Microprocessor Outgoing:- MCCB 4 pole 400 Amp, 415 volt, 36KA -01 NosMCCB 4 pole 200 Amp, 415 volt, 25KA -01 NosMCCB 4 pole 160 Amp, 415 volt, 25KA -01 NosMCCB 4 pole 63 Amp, 415 volt, 25KA -01 NosMultifunctional Digital Meter (with suitable CT)-01 NosLED type Indicating Lamp (Complete with wiring)(D) OUTDOOR ENCLOSURE: - Outdoor type enclosure having construction of galvanised steel sheet of thickness not less than 3mm. The enclosure shall have IP 54 degree of protection for HT & LT switchgear compartment & IP 23 degree of protection for Transformer Compartment. The enclosure exterior shall be power coated (colour light grey & D A Grey). Each compartment shall be provided with the door and pad locking arrangement. The compartment illumination lamp with door operated switch shall be provided for each compartment.(E) INTERCONNECTION AND EARTHING: - Interconnection between HT switchgears & Transformer using 1 core x 3 x 95 sqmm XLPE single core cable & interconnection between transformer & LT switchgears using aluminium bus bars. Internal earthing connections by using 50 x 6 mm copper strips(F) NOTE: - (a) Package Sub Station is outdoor type plinth mounted type. Quoted Rates shall be inclusive of erecting, testing and commissioning including civil works for package sub station as per OEM recommendations/specifications(b) Package Sub Station complete with the internal interconnections & all other miscellaneous items required for satisfactory completion of job shall deemed to be included in the rate quoted. |
| 71 | Supply and erecting factory made Octogonal Hot rolled steel pole confirming to IS 2062/BSEN 10025 with hot dipped galvanised finishing of 7 mtr long with mild steel base plate grouted alongwith foundation by means of 04 Nos M20 x 600 LG foundation bolts including single swan neck bracket.Note : -(i) Excavation, earth work shall be measured and paid seprately under appropriate Sch.(ii) RCC M-20 and steel for foudation shall be as per OEM recommendation and drawing which shall deemed to be included in the quoted rates. |
| 72 | Factory assembled hut type double door type with cable alloy outdoor LT panel suitable for 3 phase, fabricated out of CRCA sheet 3.15mm thick MS sheet tapered, drip proofv, top extended 100 mm on all sides including MS angle iron base frame of size 50x50x6mm thick duly welded with the following mountings/accessories & having individual compartment for switch gear connected and inter conneciton and painting with epoxy based primer and two coats of synthetic enamel paint withcontrol wiring and locking arrangement etc complete. |
| 73 | Busbar aluminium - 320 Amps -04 Nos |
| 74 | MCCB 4 pole 200 Amp, 415 volt, 25KA (Incomer) |
| 75 | MCCB 4 pole 100 Amp, 415 volt, 25KA-01 Nos |
| 76 | MCCB 4 pole 16 to 63 Amp, 415 volt, 16KA -02 Nos |
| 77 | MCB SPN 06 to 32Amp, 415 volt-01 Nos |
| 78 | Voltmeter ( 0-500V) digital tyype with selector switch |
| 79 | Ammeter (0-300 Amps) digital type with CT\"s and selector switch |
| 80 | Indication lamp with LED type |
| 81 | Grouting of panel including PCC etc. |
| 82 | Transportation |
| 83 | Labour Charges ( Elect-1, Helper-1), Testing and commissioning Charges |
| 84 | Factory assembled hut type double door type with cable alloy outdoor LT panel suitable for 3 phase, fabricated out of CRCA sheet 3.15mm thick MS sheet tapered, drip proof, internally prewired top extended 100 mm on all sides including MS angle iron base frame of size 50x50x6mm thick duly welded with the following mountings/accessories & having individual compartment for switch gear connected and inter conneciton and painting with epoxy based primer and two coats of synthetic enamel paint withcontrol wiring and locking arrangement etc complete. |
| 85 | Busbar aluminium - 250 Amps -04 Nos |
| 86 | MCCB 4 pole 160 Amp, 415 volt, 25 KA (Incomer) |
| 87 | MCCB 4 pole 125 Amp, 415 volt, 25 KA-01 Nos |
| 88 | MCCB 4 pole 16 to 63 Amp, 415 volt, 10KA ,-01Nos |
| 89 | MCB SPN 06 to 32Amp, 415 volt -01 Nos |
| 90 | Voltmeter ( 0-500V) digital tyype with selector switch |
| 91 | Ammeter (0-800 Amps) digital type with CT\"s and selector switch |
| 92 | Indication lamp with LED type |
| 93 | Grouting of panel including PCC etc. |
| 94 | Transportation |
| 95 | Labour Charges ( Elect-1, Helper-1), Testing and commissioning Charges |
| 96 | Factory assembled hut type double door type with cable alloy outdoor LT panel suitable for 3 phase, fabricated out of CRCA sheet 3.15mm thick MS sheet tapered, drip proof, internally prewired top extended 100 mm on all sides including MS angle iron base frame of size 50x50x6mm thick duly welded with the following mountings/accessories & having individual compartment for switch gear connected and inter conneciton and painting with epoxy based primer and two coats of synthetic enamel paint withcontrol wiring and locking arrangement etc complete. |
| 97 | Busbar aluminium - 320 Amps -04 Nos |
| 98 | MCCB 4 pole 200 Amp, 415 volt, 36 KA, 01 Nos (Incomer) |
| 99 | MCCB 4 pole 100 Amp, 415 volt, 16KA-01 Nos |
| 100 | MCCB 4 pole 16 to 63 Amp, 415 volt, 16KA ,-01 Nos |
| 101 | MCB SPN 06 to 32Amp, 415 volt-01 Nos |
| 102 | Timer Switch for Streel llight-01 Nos |
| 103 | Voltmeter ( 0-500V) digital tyype with selector switch |
| 104 | Ammeter (0-400 Amps) digital type with CT\"s and selector switch |
| 105 | Indication lamp with LED type |
| 106 | Grouting of panel including PCC etc. |
| 107 | Transportation |
| 108 | Labour Charges ( Elect-1, Helper-1), Testing and commissioning Charges |
| 109 | Factory assembled hut type double door type with cable alloy outdoor LT panel suitable for 3 phase, fabricated out of CRCA sheet 3.15mm thick MS sheet tapered, drip proof, internally prewired top extended 100 mm on all sides including MS angle iron base frame of size 50x50x6mm thick duly welded with the following mountings/accessories & having individual compartment for switch gear connected and inter conneciton and painting with epoxy based primer and two coats of synthetic enamel paint withcontrol wiring and locking arrangement etc complete. |
| 110 | Busbar aluminium - 250 Amps -04 Nos |
| 111 | MCCB 4 pole 160 Amp, 415 volt, 25 KA, 01 Nos (Incomer) |
| 112 | MCCB 4 pole 100 Amp, 415 volt, 16KA-01 Nos |
| 113 | MCCB 4 pole 16 to 63 Amp, 415 volt, 10KA 01 Nos |
| 114 | MCB TPN 6 to 32 Amp, 415 volt, 10KA-01 Nos |
| 115 | MCB SPN 06 to 32Amp, 415 volt-01 Nos |
| 116 | Voltmeter ( 0-500V) digital tyype with selector switch |
| 117 | Ammeter (0-400 Amps) digital type with CT\"s and selector switch |
| 118 | Indication lamp with LED type |
| 119 | Grouting of panel including PCC etc. |
| 120 | Transportation |
| 121 | Labour Charges ( Elect-1, Helper-1), Testing and commissioning Charges |
| 122 | Factory assembled hut type double door type with cable alloy outdoor LT panel suitable for 3 phase, fabricated out of CRCA sheet 3.15mm thick MS sheet tapered, drip proof, internally prewired top extended 100 mm on all sides including MS angle iron base frame of size 50x50x6mm thick duly welded with the following mountings/accessories & having individual compartment for switch gear connected and inter conneciton and painting with epoxy based primer and two coats of synthetic enamel paint withcontrol wiring and locking arrangement etc complete. |
| 123 | Busbar aluminium - 250 Amps -04 Nos |
| 124 | MCCB 4 pole 160 Amp, 415 volt, 25 KA, 01 Nos (Incomer) |
| 125 | MCCB 4 pole 100 Amp, 415 volt, 16KA-01 Nos |
| 126 | MCCB 4 pole 16 to 63 Amp, 415 volt, 10KA -01 Nos |
| 127 | MCB TPN 6 to 32 Amp, 415 volt, 10KA-01 Nos |
| 128 | MCB SPN 6 to 32 Amp, 415 volt-01 Nos |
| 129 | Timer Switch for Streel llight-01 Nos |
| 130 | Voltmeter ( 0-500V) digital tyype with selector switch |
| 131 | Ammeter (0-400 Amps) digital type with CT\"s and selector switch |
| 132 | Indication lamp with LED type |
| 133 | Grouting of panel including PCC etc. |
| 134 | Transportation |
| 135 | Labour Charges ( Elect-1, Helper-1), Testing and commissioning Charges |
| 136 | Supply & fixing LEDflood light 170 watt 230 V AC outdoor type with thermal management in multiple optics and equiped with IP66 protection, with impact and corrodion resistant complete with griver and lamp. |
| 137 | Supply & fixing of Three-Phase load of 5kW with Contactors (3 Nos.) & Incoming-Outgoing MCBs (3 nos. each) rating of 20-25 Amps & circuit wiring of min. 10 sq.mm automatic Street Light Switch using Infrared Sensor based NATURE SWITCH for automatic switching of Street Lights. Nature Switch operation should be based on Natural Light Lux* level. Required Illuminance Level for Switching ON is ≤ 30 Lux and for Switching OFF ≥ 10 Lux. The Sensor should also have part night operation facility for 4,5,6,..11&12 hours. The Sensor along with suitable Power Contactor(s), Incoming- Outgoing MCBs should be enclosed in a pole/wall mountable Enclosure made of Rust Proof, Electric Shock Proof, Termite proof and FR grade SMC Junction box conforming to IP54. Make:- Swadeep-02EC5kW3P |
| 138 | Supplyand fixingHDPE DWC Pipe dia inner dia 95mm and outer dia 110mm for laying of cable laid in trenches complete all as specifiedand as directed by the Engineer-in-Charge.(Note for Srl item No. 31 here-in-before:- Necessary excavation and earth work shall be measured and paid for separately.) |
| 139 | Supplyand fixingHDPE DWC Pipe dia inner dia 75mm and outer dia 90mm for laying of cable laid in trenches complete all as specifiedand as directed by the Engineer-in-Charge.(Note for Srl item No. 32 here-in-before:- Necessary excavation and earth work shall be measured and paid for separately.) |
| 140 | Supplyand fixingHDPE DWC Pipe dia inner dia 50mm and outer dia 63mm for laying of cable laid in trenches complete all as specifiedand as directed by the Engineer-in-Charge.(Note for Srl item No. 33 here-in-before:- Necessary excavation and earth work shall be measured and paid for separately.) |
| 141 | Supplyand fixingHDPE DWC Pipe dia inner dia 32mm and outer dia 40mm for laying of cable laid in trenches complete all as specifiedand as directed by the Engineer-in-Charge.(Note for Srl item No. 34 here-in-before:- Necessary excavation and earth work shall be measured and paid for separately.) |
| 142 | Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 of capacity 2.0 TR. |
| 143 | Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled, copper wounded, indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 3 KVA |
| 144 | Supply and fix voltage stabilizer for automatic operation, single phase naturally air cooled, copper wounded, indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4 KVA |
| 145 | Supply and fix voltage stabilizer for automatic operation, single phase naturally air cooled, copper wounded, indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA |
| 146 | Supply and fix 4 Pole MCCB 63 to 100 Amp, 50 Hz, 415 V with rupturing capacity 25 KA. |
| 147 | Teapoy wooden |
| 148 | Overall size shall be 600 mm long 450 mm wide and 540 mm high. All wood shall be first class hard wood Teak. The legs shall be 60 mm x 30 mm in section and 497 mm high. 5mm x 5mm groove shall be provided at the visible portion of top of legs. Top rails of 20 mm x 50 mm in section and 510 mm long shall be provided between the legs. Bottom rail of 20 mm x 50 mm in section and 420 mm long shall be provided between legs. Width wise at 100 mm above the bottom of the legs. Two numbers top short rails of section 20mmx50mm shall be provided connecting legs. One number bottom long stiffener of section 20mmx50mm shall be provided connecting centre of bottom short rails. 25 mm thick and 25 mm dia hard rubber/PVC ring shall be fixed to the bottom of the all legs fixed with 30 mm long screws. Top of table shall be of 18 mm thick prelaminated MDF board as approved shade and texture by Engr-in-charge and top shall cover with 4mm thick teak wood beading / PVC beading as directed by Engr-in-charge. All wood surface exposed to view when placed in position shall be polished with glossY finish. Rest all as shown on drawing. FD-382 |
| 149 | Board Notice 900 x 600mm |
| 150 | Over all size of notice board shall be 900mm length 600mm width.Green / Maroon Baize cloth shall fix with the soft board. Rest all as shown on drg. FD-117(M) |
| 151 | Board Notice 2440 x 1220mm |
| 152 | Over all size of notice board shall be 2440mm length 1220mm width.Green / Maroon Baize cloth shall fix with the soft board. Rest all as shown on drg. FD-99M |
| 153 | Table card with four chair |
| 154 | TABLE CARD(900MMX900MMX760MM):- Over all size shall be 900mm long, 900mm wide and 760mm high. All wood shall be of teak wood of first class quality. Top shall be of 18mm MDF board over which best quality green Baize cloth shall be fixed turned downwards to cover the top edges and again turned inside up to 15mm. Teak wood edging, 4mm thick shall be provided al-round the top of the table. All wood surfaces exposed to view when placed in position shall be polished with glossy finish. Eight corners of flat iron 25mmx3mm and 200mm long bent to right angle shall be screwed to the joints of legs and front panels. Where drawers are provided, the flat iron angles shall be housed in top and in legs by making rebate so that no hindrance shall be caused to smooth running of drawers. REst all as per drawing.CHAIR FOR TABLE CARD:-Overall size shall be 440mm long, 430mm wide and 890mm high. All wood shall be of first class hard wood teak(mp). Front legs shall be of 30mmx55mm in section form bottom to top of legs and 460mm high up to seat level. Rear two legs shall be of 30mmx55mm in section form bottom to top of legs and top rounded as shown on drawing. The legs at seat level shall be joined together with 30mmx65mm in section front, sides and rear rails made to shape as shown on drawing. The rails shall insertedin the groove of legs by 15mm. Two sides stiffeners 25mmx20mm in section shall be provided at 100mm high from bottom of legs joining front and rear legs in the sides. oNe stiffener of 25mmx20mm section shall be provided in the middle of short stiffeners joining shhort stiffeners. Two horizontal back rests 45mmx15mm in section, one at 25mm from top of legs and other at 45mm from botom of the top horizontal rails shall be provided out of 45mmx35mm wood made slightly in curved shape. Caning shall be done with 2mm wide and 0.4mm thick cane of shah or premier brand cane weighing not less than 6gms per ten running metre. The weaving shall be done Godrej pattern. Hard rubber/PVC rings 25mm dia and 25mm high shall be screwed to the bottom of all legs. All wood surfaces exposed to view when placed in position shall be polished with glossy finish. Fef FD352 & 353 |
| 155 | Table centre two tier |
| 156 | Overall size shall be 900mm long, 450mm wide and 400mm high. All wood shall be of teak wood. Top of the table shall be of 18mm thick prelaminated MDF board of approved shade with 4mm thick teak wood beading all-round the edges of top.Legs shall be made out of 60mmx30mm in section teak wood and 356 mm high. Bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs, widthwise at 100mm above the bottom of legs.The bottom tier shall be fixed on the top of bottom side rails with 50mm long screwss.The bottom tier shall be of 18mm thick prelaminated MDF board of approved shade with 4mm thick teak wood beading all-round the edges of both the tops.25mm dia hard rubber /PVC rings shall be fixed to the bottom of all legs fixed with 30mm long screws. All wood surfaces shall be polished with glossy finish Rest all as per drg |
| 157 | Overall size shall be 900mm long, 450mm wide and 400mm high. All wood shall be of teak wood. Top of the table shall be of 18mm thick prelaminated MDF board of approved shade with 4mm thick teak wood beading all-round the edges of top.Legs shall be made out of 60mmx30mm in section teak wood and 356 mm high. Bottom rail of teak wood of 20mmx50mm in section and 420mm long shall be provided between legs, widthwise at 100mm above the bottom of legs.The bottom tier shall be fixed on the top of bottom side rails with 50mm long screwss.The bottom tier shall be of 18mm thick prelaminated MDF board of approved shade with 4mm thick teak wood beading all-round the edges of both the tops.25mm dia hard rubber /PVC rings shall be fixed to the bottom of all legs fixed with 30mm long screws. All wood surfaces shall be polished with glossy finish Rest all as per drg FD-274. |
| 158 | Table Confrence |
| 159 | Over all size of the table shall 2135x1065x760mm. The top of the table shall 18mm th pre plaminated textured MDF board. The all wood work shall be teek/shesham/sal. The all exposed are shall polised with matching of the top and glossy finish. Rest all as per drg. FD-287 |
| 160 | Table Library |
| 161 | Over all size of the table shall 2135x1065x760mm. The top of the table shall 18mm th pre plaminated textured MDF board. The all wood work shall be teek/shesham/sal. The all exposed are shall polised with matching of the top and glossy finish. Rest all as per drg FD-287. |
| 162 | Table peg |
| 163 | Overall size shall be of 450mm long, 300mm wide and 380mm high. All wood shall be first class hard wood Teak. Top of the table shall be of 18mm thick pre-laminated MDF board approved shade and texture by Engr-in-Charge with 4mm teak wood / PVC edging all round the top of table as directed by Engr-in-Charge. Two numbers top short rails of section 20mmx40mm shall be provided connecting legs. One number bottom long stiffener of section 20mmx40mm shall be provided connecting centre of bottom short rails. Hard PVC rings shall be screwed to legs. All wood surfaces exposed to view when placed in position shall be polished with glossY finish. Rest all as shown on drawing FD-384. |
| 164 | Table serving |
| 165 | Over all size shall be 900mm long. 540mm wide and 840mm high. All wood shall be of teak.The size of the legs shall be of 35mmx60mm and of top teak wood rail shall be 25mmx75mm.The three bottom stiffeners shall be of size 25mmx50mm.The top at bottom stiffener shall be of 18mm thick prelaminated MDF board and the upper top shall be of 18-20mm thick marble stone. All wood surfaces exposed to view when placed in position shall given glossy polish finish.Rest all as per drawing FD-411 |
| 166 | Table writing |
| 167 | Overall size shall be 1145mm long, 600mm wide and 760mm high. All wood shall be of first class hard teak wood except top and right hand side drawer cabinet. Legs shall be of 35mmx55mm in section and 717mm high having 5mmx5mm in section groove at the top of legs at the portion when placed in position. The top shall be of 18mm thick prelaminated MDF board of approved shade and the edges shall be covered with PVC edging / 4mm thick teak wood beading. Two short stiffeners of teak wood of size 50mmx40mm in section irrespective of what is shown on drg shall be provided between legs at 100mm from bottom of legs. One additional long stiffner shall provide same as snown on drawing. Sides of the box whichhouse the drawer and cabinet shall be 18mm thick prelaminated MDF board exterior grade. Sides and back of drawers shall be of 12mm thick MDF board. Bottom of drawers shall be of 12 mm thick plywood commercial. Shutter for cabinet shall be fixed with piano type continuous hinges. Lock shall be provided to drawer and shutters. Recessed handle shall be provided to drawer and shutter.25mm dia and 25mm high rubber shoes shall be fixed to bottom of legs. All wood surfaces shall be polished with glossy finish. Rest all as per drg. FD--275 |
| 168 | Chair dining |
| 169 | Overall size shall be of 440mm long, 430mm wide and 890mm high. All wood shall be first class hard wood Teak. Front legs shall be of 30mm x 55mm in section throughout up to 460mm high. Rear legs shall be 30mm x 55mm in section and 890mm high. The distance between outer side of legs in front shall be 440mm and the distance between outer side of legs in the rear shall be 405mm. The legs shall be joined with front, sides and rear rails made to shape out of 30mm x 65mm in section. Two side stiffener in short sides shall be provided of 20mm x 25mm in section. One stiffener of 20mm x 25mm in section shall be provided in the middle of short stiffeners, joining short stiffeners. Back horizontal rests, two in numbers of 45mm x 15mm made slightly curved in shape out of 45mm x 35mm in section wood shall be provided one at 18mm below the top of rear legs and other below 45mm from the bottom of top horizontal rail. Caning shall be done without any joint in the cane. The cane shall be 2mm wide and 0.4mm thick half round gola type and woven in Godrej Pattern. All wood surfaces exposed to view when placed in position shall be polished with glossy finish. Hard rubber/PVC shoes shall be screwed to the bottom of all legs. Rest all as shown on drawing FD-279 |
| 170 | Chair easy |
| 171 | All wood shall be of seasoned first class hard wood Teak. Legs of chair shall be of 55mm x 25mm in section at place under side arm rest tapering to the bottom of legs to 25mm x 25mm in section. Front legs shall be joined by 50mm x 25mm in section rails provided below seat frame for the support of frame. Rear legs shall be 55mm x 25mm in section below arm rest and 25mm x 25mm in section at the bottom of legs. Rear legs shall be joined together by rear rails of 50mm x 25mm in section provided at the bottom of seat frame. Seat frame shall have the rear horizontal out of section 70mm x 40mm joining the sides of frame which shall be 70mm x 40mm at the back and 25mm x 25mm in section near the front rail. The front rail of seat frame shall be 55mm x 25mm in section. The seat frame shall be of size 510mm long in front and 480mm long at rear and 575mm deep. The top horizontal rail of back rest shall be out of 55mm x 40mm and shall be 50mm x 20mm. The bottom horizontal frame of back rest shall be 55mm x 20mm in section. The sides of back rest frame shall join the seat of chair and shall be out of 70mm x 25mm made to shape as shown on drawing. The arm rests out of 65mm x 25mm in section and 610mm long shall be provided in shape as shown on drawing. Seat and back shall be wooden with plastic cane of 2mm wide and 0.4mm thick in Godrej pattern. Hard rubber/PVC toes shall be provided to bottom of all legs with screw. All wood surfaces exposed to view when placed in position shall be polished withglossy finish. Rest all as shown on drawing.FD-229 |
| 172 | Hat stand with mirror (small) |
| 173 | Overall size shall be 1000mm long. 710mm high 25mmx37mm teak wood frame shall be provided al-round the Hat stand. 18mm thick pre-laminated MDF bd size 1000mmx710mm shall be provided as back of hat stant. Copper anodized/aluminium peges four on the left side of mirror and three below the mirror shall be provided as shownon drawing and as directed by Engineer-in-charge . 5mm thick mirror shall be provided as directed by Engineer- in-charge. The size of mirror shall be 300mmx460mm made to shape as shown on drawing shallprovided with in 18mmx25mm teak wood edging all around the mirror mild steelkey plate shall be provided at both top corners of the hat stand. all teak wood surfaces shall be given high glossypolish . Rest all as per drawing FD-1110 |
| 174 | Rack Magzine |
| 175 | Overall size shall be 1200mm long, 800mm high and 100mm wide or deep. Back shall be of 12mm thick MDF board.The vertical partitions(05 in nos) shall also be of 12mm thick MDF board.The horizontal rails of teak wood 10mm thick and 50mm wide (04 in nos)shall be fixed on back as shown on drg .The 16 equal partitions made so far shall be provided with acrylic transparent persepex sheet 3mm thick in slanting in 5mm groove made in vertical paritions.The top left and right back shall be provided with a key plate for hanging purpose.The all edges ofMDF boardshall be covered with 4mm thick teak wood beading. All wood and teak veneer surfaces shall be french polished with high gloss finish.FD-365 |
| 176 | Safe meat and milk |
| 177 | All as shown on drg. Over all size shall be 1350mm long 540mm wide and 840mm high. All wood shall be 1st class hard wood.The top of the meat safe shall be 20mm thick Marble/Kota Stone as directed by GE. Rest all as per drg.FD407 |
| 178 | Side board |
| 179 | Overall size shall be 1025mm long, 450mm wide and 750mm high. Back shall be 18mm th pre laminated MDF board as approved shade & texture of 1025mm long and 750mm high. The sides shall be 18mm thick pre laminated MDF board as approved shade & texture of 450mm wide and 675mm high. Base frame size of 925 mm long and 350mm width as rectangular frame shall made by 75x50mm first class teak wood. Top and bottom shall be of 18mm thick pre-laminated MDF board as approved texture & shade. Four drawers shall be provided equally in this space. Drawer sides and bottom shall 12mm thick prelaminated MDF board with PVC edging as approved shade and the front of drawer shall be 18mm thick prelaminated MDF board as approved shade teak wood bearers fixed exactly in centre of both sides of the drawers shall be provided to each drawer. Another 20mm x20mm teak wood bearer shall be fixed to the vertical of the side bd in such a way the the bearers fixed with thesides of the drawer shall slide over smoothly. On left side compartment two horizontal shelves, equally spaced shall providedas shown on drawing. The size of shelves shall be 610mm long, and 387 mm wide. Two side hung shutters shall be provided to left hand side of side board. the shutters shall be side hung with 20mm size piano type hinges. The shutters shall be of 18mm thick pre-laminated MDF as approved shade and texture.PVC edging / 4mm thick teak wood edging shall be provided alround the front shutters and front of shelves. Shelvesh shall be fixed over the standard aluminium shelf support. All drawers and shutters shall be provided with one decorative handle as approved by Engr-in-charge. All wood surfaces exposed to view when placed in position shall be given glossy finishpolish all as per FD-1112 |
| 180 | Sofa Set 4 Seater (1+1+1+1) |
| 181 | Overall size of one Seat shall be 670mm long and 745 mm wideand 530mm high up to arm rest level. The sofa set single seater shall consist of one single seats. All wood shall be of first class teak wood.Legs of sofa setshall be 70mm x35mm in section teak wood. Front legs shall be jointed by 100mm x 35mm in section wooden rail in front . Front and rear legs shall be joined with 100mm x 35mm in section wooden rails in sides.100mm thick seat cushionand back cushions shall be of size 530mm x 560mm (one numbers in seat and one numbers in the back). The cushion shall be of cool foam or any other superior quality foam of 32/40 density as approved by Engineer-in-charge. Cushion shall be covered with approved color tapestry cloth as directed by Engineer-in-charge. All wood surface exposed to view when placed in position shall be polished with glossy finish rest. Rest all as per drg.FD-373 |
| 182 | Sofa set 5 seater (3+1+1) |
| 183 | Overall size of three seat piece shall be 1730mm long, 745mm wide and 530mm high up to arm rest level.Overall size of one piece shall be 670mm long and 745 mm wideand 530mm high up to arm restlevel. The sofa set to seat five shall consist of one large three seat piece and two small one seat pieces.. All wood shall be of first class teak woodlegs of sofa setshall be 70mm x35mm in section teak wood . Front legs shall be jointed by 100mm x 35mm in section wooden rail in front . Front and rear legs shall be joined with 100mm x 35mm in section wooden rails in sides.100mm thick seat cushionand back cushions shall be of size 530mm x 560mm (three numbers in seat and three numbers in the back for thelarge seat). In one seat sofa chair the cushion shall be one in backand one in seat of size 530mm x 560mm. The cushion shall be of cool foam or any other superior quality foam of 32/40 density as approved by Engineer-in-charge.Cushion shall be covered with approved color tapestry cloth as directed by Engineer-in-charge. All wood surface exposed to view when placed in position shall be polished with glossy finish rest.Rest all as per drg FD-373 |
| 184 | Sofa Set Single Seater |
| 185 | Overall size of one Seat shall be 670mm long and 745 mm wideand 530mm high up to arm rest level. The sofa set singleseater shall consist of one single seats. All wood shall be of first class teak wood.Legs of sofa setshall be 70mm x35mm in section teak wood. Front legs shall be jointed by 100mm x 35mm in section wooden rail in front . Front and rear legs shall be joined with 100mm x 35mm in section wooden rails in sides.100mm thick seat cushionand back cushions shall be of size 530mm x 560mm (one numbers in seat and one numbers in the back). The cushion shall be of cool foam or any other superior quality foam of 32/40 density as approved by Engineer-in-charge. Cushion shall be covered with approved color tapestry cloth as directed by Engineer-in-charge. All wood surface exposed to view when placed in position shall be polished with glossy finish rest. Rest all as per drg FD-373 |
| 186 | Board Notice (hospital) |
| 187 | Over all size shall be 900x600mm. The back of the 18mm soft ply with green/Maroon baize cloth in front of the ply. Rest all as per drg.HFD-2037 |
| 188 | Chair dining cushioned |
| 189 | Overall size shall be 950mm high,450mm wide and 450mm deep.The size of the legs shall be 40x50mm .Front and side rails shall be of size 25x65mm.Stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg 75x75x25 teak wood stopper shall be fixedwith main frame and legs four nos each in every corner for the support of the cushion and seat ply.75mm thick 32 density cushion of approved foam covered with approved tapestry cloth shall be fixed over 12mm thick ply as specified in drg.Side frame of back of the chair shall be ofsection 40x50mm..Four teak wood vertical stiffenersof section 20x30mm shall be fixed in back of chair. 25mm dia and 25mm high nylon buffersshall be provided to bottom of all legs.The curved teak wood back shall be of section 30x45mm. All sizes shall be taken as stated in specification, irrespective of what is shown on drg.All wood surfaces shall be lacquer polished with glossy finish of walnut shade.Rest all as per drg.FD/MAP-II/04 |
| 190 | Table dressing ladies |
| 191 | The overall size of the table dressing shall be 1150mm long 380mm wide and 1700mm high. The sides, top ,back and frontof the base unit shall be of 18mm thick prelaminated MDF board as approved shade. The bottom of the side units shall be of 18mm thick commercial BWR plywood. The base shall be provide to the both side unit as a rectangular frame made out 50x50mm teak wood as directed by Engr-in-charge.The sidesand back drawers shall be of 12mm thick prelaminated MDF ,bottom of the drawers shall be of 12 mm thick commercial ply whereas the front of the drawers shall be of 18mm thick prelaminated MDF board. 5mm thick electro copper plated mirror shall be fixed over 6mm thick plywood back. The plywood shall be fixed on two vertical hardwood member of size 45mmx35mm .a horizontal support of size 30mmx20mm shall be provided in between two vertical members. The Overall size of the stool shall be 440mm long 350mm wide and 425mm high. The four sides shall be of 18mm thick prelaminated MDF .The top of the stool shall be of 12mm thick plywood openable as shown in drg. Four heavy duty revolving nylon double wheels shall be provided at base below the 6mm base ply fixed over wooden runner 20mmx20mm.The seat of the stool shall be 75mm high ,made of foam 32 density covered with tapestry cloth as approved by Engr-In-charge/GE.Rest all as per drg. Overall size shall be 900mm long, 380mm wide and 1700mm high (height is the mirror). All wood surfaces exposed to view when placed in position shall given glossy finish polish.Rest all as per drgs FD-E6/MAP-II/07 |
| 192 | Dressing Mirror Gents |
| 193 | Over all size of mirror box shall 1200x600mm which shall be supported on teak wood legs of 38x38mm & wooden brackets made out of TW section 38x112x112mm. 5mm th mirror shall backed by 06mm th BWR ply and coverd with pre laminaated 12mm thick MDF as approved shade. 03 Nos of shelves 08 mm thich transprant acralic sheets equalant length of inside of cabinet supported on holders shall fix as per the drg. Side of the cabinet box shall made of prelaminated 12mm thick MDF board as approved colour and shade.Back side of cabinet shall packed with 12mm th BWR ply. Rest all as per drg and directed by Engr-in-charge.FD-E6/MAP-II/01 |
| 194 | Stool dressing cushioned |
| 195 | Overall size shall be 450 mm long,300mm wide and 380mm high. All wood shall be 1st class teak wood.The size of the legs shall be of size 50mmx30mm .The size of the three bottom stiffener shall be of size 19mmx25mm.The size of the top rails shall be of size 25mmx65mm.12mm thick commercial plywood shall befixed over the top rails for seat .The seat of the stool shall be made of 75mm thick foam cushion of 32 density duly covered with best quality tapestry cloth approved by GE .Rest all as per drg and directed by Engr-in-charge. All wood surface exposed to view when placed in position shall be polishedglossy finish. Rest all as per drg. FD-E6/MAP-II/14 |
| 196 | Table dining 8 pers |
| 197 | Well seasoned TEAKWOOD wood throughout except top which shall be of 18mm thick prelaminated TEXTURED MDF BOARD as approved by GE with matching PVC edging/lamination sheet edging all round the top. 8 Nos Teak wood corners of size 75x75mm be provided between the legs and rails of table irrespective of what is shown on drawing. Table shall be polished with glossy finish in colour resembling with top. Rest all as specified/ shown in DrgFD-E6/MAP-II/03 and directed by Engr-in –charge/GE. |
| 198 | Table dining 6 persons |
| 199 | Well seasoned TEAKWOOD wood throughout except top which shall be of 18mm thick prelaminated TEXTURED MDF BOARD as approved by GE with matching PVC edging/lamination sheet edging all round the top. 8 Nos Teak wood corners of size 75x75mm be provided between the legs and rails of table irrespective of what is shown on drawing. Table shall be polished with glossy finish in colour resembling with top. Rest all as specified/ shown in DrgFD-E6/MAP-II/03and directed by Engr-in –charge/GE. |
| 200 | Bench workshop 1500x900x760mm |
| 201 | Over all size shall be of 1500x900x760mm.Four legs shall be of 32mm square mild steel tube of wall thickness 1.6mm.Size of the steel frame shall be 1400mmx800mmx720mm.Legs shall be 720mm high.Top of legs shall be joined together in long and short sides with 32mm sq mild steel tube. Two Short stiffeners of 32mm mild sq steel tube shall be provided at 100mm from bottom of legs in short sides.A drawers shall be provided at right hand side of the table with locking arrangement,the drawer and bearer for drawer shall be made of 1mm thick MS sheet . Hard rubber shoe shall be provided for legs. The top of the table shall be of 40mm thick IInd class hard wood and shall be given with three coats of Ist class oil paint over a coat of primer.Two coat synthetic enamel black paint shall be painted over a coat of primer on steel frame. All joints/welding, fixing shall be done in accordance with standard specifications. Rest all as shown on drg.FD-1024 |
| 202 | Bench workshop 1800x900x760mm |
| 203 | Over all size shall be of 1800x900x760mm.Four legs shall be of 32mm square mild steel tube of wall thickness 1.6mm.Size of the steel frame shall be 1700mmx800mmx720mm.Legs shall be 720mm high.Top of legs shall be joined together in long and short sides with 32mm sq mild steel tube. Two Short stiffeners of 32mm mild sq steel tube shall be provided at 100mm from bottom of legs in short sides.A drawers shall be provided at right hand side of the table with locking arrangement,the drawer and bearer for drawer shall be made of 1mm thick MS sheet . Hard rubber shoe shall be provided for legs. The top of the table shall be of 40mm thick IInd class hard wood and shall be given with three coats of Ist class oil paint over a coat of primer.Two coat synthetic enamel black paint shall be painted over a coat of primer on steel frame. All joints/welding, fixing shall be done in accordance with standard specifications. Rest all as shown on drg.FD-1024 |
| 204 | Table cook house steel |
| 205 | Over all size shall be of 900x540x840mm.25mm square MSand tube 1.6mm thick shall be provided for steel frame.Top shall be of not less than 20mm thick marble stone slab duly finishedand rounded edges. Paint synthetic enamel black shall be used two coats over a coat of primer (internal and external). All Dimensions, shape and size shall be followed as per drg. All joints, fixing shall be done in accordance with standard specifications. Rest all as shown on drg.FD-1019 |
| 206 | Book case steel |
| 207 | Over all size shall be of 840 mm long, 310 mm wide and 1675 mm high. All sheet shall be mild steel sheet 1 mm thick, back, sides, bottom, top and shelves.The book case shall be provided with four compartments of equal size. The shutters of each compartment shall open towards top and slide into the depth of the book case.Transparent glass 4mm thick shall be provided to front shutters.Two steel handles of 100 mm long shall be provided to each shutter of the compartment. The locking device shall be provided to each compartment with duplicate key and each shutter shall be provided with decorative key plate. All steel surfaces internally and externally shall be paintedwith two coats of silver grey paint over a coat of primer with spray machine after preparation of surfaces. A mark of MES shall also be provided ontop shutter of visible colour as directed by Engr-in -Chargeas as per FD-1028 |
| 208 | Table pantry steel |
| 209 | Over all size shall be 900mm long. 550mm wide and 840mm high. Size of steel frame shall be 880mmx815mm. Legs shall be four in numbers. Legs shall be of 25mm square mild steel tube of 1.6mm wall thickness. All steel sheet used for drawers and side overing of drawer and for support of drawer shall be of mild steel and 1mm thick. Top of table shall be not less than 20mm thick polished Kotah/Marble stone slab in one piece. Legs shall be provided with hard rubber/PVCtoes at bottom. All steel surfaces exposed to view when placed in position shall be paintedwith two coats of enamal black internally and extrenally with spray machine after preparation of surfaces.Painting shall be done with spray machine.Rest all as per drg.FD-1020 |
| 210 | Table 900 x 900 x 760mm steel |
| 211 | Overall size shall be 900mlong,900mm wide and 760mm high. Steel frame shall be of 800 mm X800mm X742mm . Four legs shall be of 25mm square mild steel tube of wall thickness 1.6mm. Legs shall be joined together with the top rails of 25mm square mild steel tube of thickness 1.6mm. Top of the table shall be of 18mm thick pre-laminated MDF board and provided with PVC/4mm teak wood edging all round the top oftable. Hard rubber/PVC toes shall be provided to bottom of legs. All steel surfaces exposed to view when placed in position shall be paintedwith two coats of enamal black internally and extrenally with spray machine after preparation of surfaces.Painting shall be done with spray machine.Rest all as per drg.FD-1009 |
| 212 | Table 1520 x 860 x 760mm steel |
| 213 | Overall size shall be 1520mm long, 860mm wide and 760mm high. Steel frame shall be 1420mmx760mmx742mm. Four legs shall be of 32 mm square mild steel tube of wall thickness 1.6mm. Legs shall be joined together with top rails of 32mm square mild steel tube of wall thickness 1.6mm in long and short sides. One stiffener shall be provided in the middle of to rails joining top long rails with 32mm square mild steel tube of wall thickness 1.6mm two stiffeners shall be provided in the middle of top short rails joining short rails at with 32 mm square mild steel tube of wall thickness 1.6mm. Two stiffeners shall be provided at 100mm from bottom joining legs in short sides with 32mm square mild steel tube of wall thickness 1.6mm. One long stiffener shall be provided at 100mm from bottom joining short stiffeners in the middle with 32mm square mild steel tube of wall thickness 1.6mm. Bottom of legs shall be provided with hard rubber/PVC shoes or toes. Top of table shall be of 18mm thick pre-laminated MDF board and shall be provided wtih PVC/Teek wood edging all arount the table irrespective of what is shown and specified on drawing.FD-1010 |
| 214 | Chair verandah |
| 215 | The chair shall be made to shape, size and design all as indicated on drawing. Mild steel conduit of wall thickness 1.6mm of dia as shown on drawing shall be provided. Bending, welding, turning and other items / fittings shall be done / provided as specified in relevant IS as per engineering norms, patterns as directed by GE. All exposed surfaces of steel shall be finished with two coats of synthetic enamel paint over a coat of red oxide primer with spray machine. Hard rubber toe shall be provided to all legs as shown on drg. Caning shall be done after painting of steel surfaces. Rest all as shown on drawing FD-359 |
| 216 | Desk stand lecture steel |
| 217 | Over all size shall be 970mm wide and 1220mm high. Two upright of mild steel rectangular tube of 75mmx25mm of 1202mm high shall be provided in rear side and shall be 635mm apart. The two upright shall be joinded with bottom, middle and top rails with 75mmx50mm mild steel tube of wal thickness 1.6mm.The two sides rails at bottom fixed at 125mm from bottom shall be 430mm long 75mmx50mm mild steel tube of wall thickness 1.6mm and shall form the part of bottom rails and join the long side of bottom rail of size 785mm long, 75mmx50mm mild steel tube of wall thickness 1.6mm. The front base below bottom rails shall be of 785mm long and 125mmx50mm mild steel tube of wall thickness 1.6mm and this shall be joined with rearuprights with sides of base which shall be 430mm long 125mmx50mm mild steel tube of wall thickness 1mm. Two support of angle iron shall be provided to the bottom rails owards sides of 150mm long overwhich 1.6mm thick mild steel foot rest shall be fixed. Foot rest shall be 635mm long. The two sides rails at top fixed and 170mm from bottom shall be 505mm long 75mmx50mm mild steel tube of all thickness 1.6mm and shall form the part of top rails and jon the long side of top rail of size 920mm long 75mmx50mm mild steel tube of wall thickness 1.6mm sloping upright support shall be provided between top rails, middle rail andbottom rails in the front two corners. To sloping supports of 25mm square mild steel tube of wall thickness 1.6mmm shall be welded to sloping upright supports for making shell which shall have 12mm thick pre laminated MDF board irrespective of what is shown of drawing. Another horizontal shell 230mm below the top shelf shall be provided by welding 25mm square mild steel tube of wall thickness 1.6mm over which 12mm thick pre-laminated MDF board shall be fixed as shown on drawing. Front and sides of desk stand lecture shall be convered with 12mm thick pre laminated MDF board as approved colour and texture. 18mm thick pre-laminated MDF board shall be provided at top. All edges of pre-laminated MDF board remained exposed shall be covered with PVC/Teek edging as per the size of board edging . All steel surfaces exposed to view when placed in position shall be given two coats of enamel paint over a coat of primer with spray machine after preparation of steel surfaces.FD-1022 |
| 218 | Ladder Alum |
| 219 | Overall size shall be of 2310mm long and 363.5mm wide.The ladder shall be of Aluminium having wall thickness 3.18mm .Each rung shall be of 23mm dia aluminium pipe with wall thickness not less than 2.43mm and shall be eight in nos at equidistant space of 300mm in between as shown in drg.The stringer of ladder shall be 31.75mm wide and 3.18mm thick .Each alumnium pipe rung of 23 mm dia shall be fitted inside the stringer with end bend to shape and each rung on both sides shall be provided with hard rubber cap. Hard rubber caps/shoes shall be fixed at the ends of aluminium rungs and stringers as shown on drawing with screws. Rest all as shown on drawing.FD-1025 |
| 220 | Rack steel 6 tier |
| 221 | Overall size shall be 915mm long,610mm wide and 1905mm high.Four vertical angle iron of 40mmx40mmx4mm shall be provided at four corners..Top,Bottom ,sides ,Back,Shelves shall be of 1mm thick mild steel sheet.Five shelves equally spaced to make six equal compartments shall be provided of 1mm thick MS sheet.Four 75mmx75mmx3mm flat iron cut to shape to form angular brackets shall be provided on front side.All steel surfaces exposed to view shall be given two coats of enamel paint over a coat of primer with spray machine after preparation of surfaces. Hard rubber/PVC shoe shall provide for the four vertical angles. Rest all as per drgs.FD-1038 |
| 222 | Rack Pigeon hole steel |
| 223 | Over all size shall be of 1905x610x915mm. The entire rack shall be made of 1mm mild steel sheet.The sides shall be provided with 40x40x4mm angle iron welded to 1.00mm thick MS sheet.75x75x3mm thick Flat iron cut to shape shall be welded at front corner.All partitions shall also be made of 1mm thick mild steel sheet and welded to each other in continous. All Dimensions, shape and size shall be followed as per drg. All joints, fixing shallbe done in accordance with standard specifications. Rest all as shown on drg. All steel surfaces exposed to view when placed in position shall be paintedwith two coats of silver grey paint internally and extrenally with spray machine after preparation of surfaces. Painting shall be done with spray machine.Rest all as per drg.FD-1037 |
| 224 | Side rack with tray 4 space |
| 225 | Overall size shall be 11200mm long, 355mm wide and 810mm high. Four mild steel angle iron 40mmx40mmx3mm shall be provided as legs and shall be 810mm high.The middle shelf shall be equally spaced between top and bottom shelves.The thickness of sheet shall be 1mm.Top shelf shall have four compartments or spaces equally spaced with 50mm high partition and back covering with mild steel sheet 1mm thick.All steel surfaces exposed to view when placedin position shall be given two coast of enamel paint over a coat pf primer after preparation of surfaces. Hard rubber/PVC shoes shall provide for the bottom angle.Painting shall be done with spray machine all as per FD-1023 |
| 226 | Side rack with tray 3 space |
| 227 | Overall size shall be 840mm long, 355mm wide and 810mm high. Four mild steel angle iron 40mmx40mmx3mm shall be provided as legs and shall be 810mm high.The middle shelf shall be equally spaced between top and bottom shelves.The thickness of sheet shall be 1mm.Top shelf shall have three compartments or spaces equally spaced with 50mm high partition and back covering with mild steel sheet 1mm thick. All steel surfaces exposed to view when placedin position shall be given two coast of enamel paint over a coat pf primer after preparation of surfaces. Hard rubber/PVC shoes shall provide for the bottom angle. Painting shall be done with spray machine all as per FD-1023 |
| 228 | Almirah Large steel |
| 229 | Overall size shall be 1985mm high,920mm wide and 485mm deep. The base shall be made of two numbers mild steel sheet channel bases made in U shaped with ends covered . Mild steel sheet shall be 1mm thick. The base channel shall be welded at 50mm from each end of the length of 920mmand shall be up to full width of 485mm and shallbe 100mm high Top, sides bottom and back of almirah shall be of 1mm thick mild steel sheet . Four shelves equally spaced of 1mm thick mild steel sheet shall be provided to make five compartments.Front shutter shall two leaves of equal size .Front shutter leaves shall have three butt hinges of 75mm fixed to each shutter and shall be side hung. All joints and welding and fixing shall be done in accordance with the standard workmanship. One chromium plated steel handle with a locking device shall be providedas shown on drawing . The locking device shall be three way locking device and shall also be provided with decorative key plate . All steel surfaces exposed to view when placed in position shall be paintedwith two coats of silver grey paint internally and extrenally with spray machine after preparation of surfaces.A mark of MES shall also be provided on top left corner of front shutter with visible colour. Painting shall be done with spray machine.Rest all as per drg.FD-1031 |
| 230 | Almirah small steel |
| 231 | Overall size shall be 1270mm high,765mm wide and 440mm deep. The base shall be made of two numbers mild steel sheet channel base welded to bottom of almirah and shall be 100mm high. Mild steel sheet shall be 1mm thick for channel base. The base channel shall be welded at 50mm from each end of 765mm length and shall be up to full width of 440mm of almirah. Top, sides, back, bottom and front of almirah shall be of 1mm thick mild steel sheet. Three shelves equally spaced making four compartments shall be provided and shall be of 1mm thick mild steel sheet.Front shutters shall have two leaves. a steel chromium plated handle 100mm long shall be provided to the shutter. A three way locking device shall be provided to front shutters. PVC sheet of size equal to size of leg baseshall also be fixed under the legs of almirah irrespective of what is shown on drg .All joints and welding, fixing shall be done according standard workmanship. All steel surfaces exposed to view when placed in position shall be paintedwith two coats of silver grey enamel paint over a coat of primer with spray machine after preparation of surfaces Rest all as per drgs FD-1032 |
| 232 | Bar stool 2\"/3\" high cushioned |
| 233 | All as shown on drawing. Overall size shall be 455mm dia and 600mm high four legs of 25mm dia mild steel sheet pipe legs made to shap of thickness 1.6mm irrespective of what is shown on drawing. 12mm dia mild steel bar ring shall be provided at 150mm from bottom joining four legs as showon drawing. Two cast iron discs shall be provided at top of legs and at 100mm top of legs as shown on drawing and fixed to legs with 6mm dia bolt. 25mm dia threaded steel bolt 255mm long fixed with 6mm thick steel plate 100mm dia and top of 25mm dia threaded bolt shall be provided as shown on drawing the padded seat shall be fixed on 6mm thick, 100mm dia steel plate with scren for which four nubmber holes are provided in steel plate. Padded seat shall be 38mm dia . The bottom of padded seat shall be 30mm soft wood over which a layer of coir shall be provided to give proper shape as shown on drawing. Hessian cloth shall be provided to cover the layer of coir andunder the soft wood padded seat. A layer of cotton shall be providedand covered with Rexene cover alround the top and bottom to form the padded seat. All steel surfaces exposed to view when placed in position shall be given two coats of enamel paint over a coat of primer after preparation of surfaces. Hard rubber/PVC toes shall be provided to the bottom of legs as per drgFD-1026 |
| 234 | Stool steel 305 x 305 x 510mm |
| 235 | Over all size shall be 305x305x510. All sheet shall be 1.6mm thick MS sheet and the all steel surface shall painted with Silver grey over a coat of steel primer. Rest all as per drgFD-81(M). |
| 236 | Table 900 x 600 x 760 mm steel without drawer |
| 237 | Overall size shall be 900mmX600X760mm. Steel frame shall be of 800mmX500mmX742mm.Four legs shall be of 25mm square mild steel tube of wall thickness 1.6mm.Top of legs shall be joined together with 25mm square mild steel tube of wall thickness 1.6mm top rails on long and short sides.Two short stiffeners joining legs in short sides of 100mm from bottom shall be provided in the middle of short stiffener joining short stiffeners with 25mm square mild steel tube of wall thickness 1.6mm at 100mm from bottom of legs.The top shall be of prelaminated MDF board of 18mm thick with PVC/teak wood edges alround the edges of the top fixed with headless nails and adhesive. PVC/hard rubber toes shall be provided to the bottom of legs. All steel surfaces exposed to view when placed in position shall be painted with two coats of silver grey enamel paint over a coat of primer with spray machine after preparation of steel surfaces all as perFD-1007 |
| 238 | Table office clerk steel |
| 239 | Overall size shall be 1200mm long, 610mm wide and 760mm high. Steel frame shall be of size 1160x570x742mm .four legs of 25mm mild steel tube of 1.6mm wall thickness shall be provided. Top of legs shall be joined together with 25mm square mild steel tube of wall thickness 1.6mm in long and short sides. Two short stiffeners f same size shall be provided at 130mm from bottom of legs. One long stiffener shall also be provided to the middle of short stiffeners. Three drawers of equal size shall be provided on the right hand side above the stiffener at 130mm high with overall size of 350mm wide and 430mm high and 410mm deep..The top of table shall be provided with pre-laminated MDF textured board of 18mm thick with teak / PVC edging alround the table .Hard rubber/PVC toes shall be provided to the legs. Locking device shall be provided to drawers. All steel surfaces exposed to view shall be given two coats of enamel paint over a coat of primer with spray machine after preparation of steel surfaces. Rest all as per drgs FD-1004 |
| 240 | Table office officer steel |
| 241 | Over all size shall be of 1680x670 x760mm.25 mm MS square tube 1.6 mm thick shall be provide to frame 1 mm thickMS sheet nomonal all around for drawer. Top shall be of 18mm thick pre-laminated textured MDF board as approved size of1680mm x 670mm and PVC/ teak wood edging all around shall be provided for top. .All steel surfaces exposed to view when placed in position shall be paintedwith two coats of granular silver grey enamel paint over a coat of primer with spray machine after preparation of surfaces Rest all as per drgs. All Diamensions, shape and size shall be followed as per drg. All joints, fixing shallbe done in accordance with standard specifications. Rest all as shown on drgFD-1003 |
| 242 | Table 900 x 600 x 760 mm steel with drawer |
| 243 | Overall size shall be 900mmx600mmx760mm. Steel frame shall be of 800mmx500x742mm.Four legs shall be of 25mm square mild steel tube of wall thickness 1.6mm.Top of legs shall be joined together with 25mm square mild steel tube of wall thickness 1.6mm top rails on long and short sides. Two short stiffeners joining legs in short sides at 100mm from bottom of legs shall be provided with 25mm square mild steel tube of wall thickness 1.6mm .One long stiffener shall be provided in the middle of short stiffener joining short stiffeners with 25mm square mild steel tube of wall thickness 1.6mm at 100mm from bottom of legs. A drawer on left side of table near top stiffener shall be provided of size 350mmx130mm and 500mm deep with locking arrangement and recessed handle. Mild steel sheet used for drawers shall be of 1mm thickness.Top of table shall be of 18 mm thick pre-laminated MDF board of walnut shade and PVC/teak woodedging al -round the top of table. PVC/Hard rubber toes shall be provided to the bottom of legs. All steel surfaces exposed to view when placed in position shall be paintedwith two coats of silver grey paint internally and extrenally with spray machine after preparation of surfaces.Painting shall be done with spray machine.Rest all as per drgFD-1008 |
| 244 | Table 600 x 600 x 760mm Steel |
| 245 | Over all size shall be of 305L x 305W x 510H. Material of stool shall used stainless steel 16 Gauge all edges shall be smoothening all welding shall be carred proper workmanship all as perFD-142(M). Rest all as per dir of Engr-in-charge / GE |
| 246 | Trestle store room steel |
| 247 | Overall size shall be 2440mm long, 600mm wide a 300mm high. Two long angle iron 40mmx40mmx6mm of mild steel 1980mm long shall be provided 520mm apart at bottom connected with 50mmx3mm iron bracing, four in numbers, and equally spaced with 50mmx50mmx6mm iron.Rest all as per drg. AllSteel and iron work surfaces shall be painted with two coats of enamel black paint over a coat of primer with spray machine after preparation of steel surfaces on exposed to view when placed in position all as perFD-1043 |
| 248 | Locker bed side steel |
| 249 | Overall size shall be 760mm long, 600mm wide and 1100mm high. The locker shall be made of mild steel sheet 1mm thick.20 mm dia conduit pipe shall be chrome plated with wall thickness of 1.6 mm shall be fixed with sidesockets.Two handles chromium plated 100mm long shall be fixed to shutters with necessary riveting . One hasp and staple 75mm long shall also be fixed to shutters with riveting.The left shutters shall be provided with 100mm long tower bolt inside at upper and lower ends also.The locker shall be provided with compartments as shown in drgs made of 1mm MS sheet. All steel surface internally and externally, exposed to view when placed in position shall be given two coats of enamelsilver grey paint over a coat of primer internally and externally after properly smoothened the surface. A Mark of MES shall also be provided at top left corner of front shutter of visible colour. Painting shall be done with spray machine. Rest all specifications areas per drgFD-1029 |
| 250 | Bed Stead iron Hospital |
| 251 | Overall size shall 1980x910x600mm high. Bed shall two section mechanically operated fixed hight and adjustable back rest. Steel frame shall made out of 1.25mm th MS tube. Steel frame shall epoxy podwer coted and baked. 100mm dia caster wheel shall provide to the four legs with stoper as per the drgHFD-2001. Rest all as per the drawing and directed by Engr-in-charge/GE. |
| 252 | Couch examination with foot steps |
| 253 | Over all size of couch examination shall1895x510x830. All steel frame shall epoxy powder coated with ivory white colour. The matteress foam 75mm thick with 32 density shall coverd with good quality of rexine as approved by GE. The materess shall be in two part as per drawing. Rest all as per drawing HFD-2019 |
| 254 | Stool adj steel Hosp |
| 255 | The main frame of tripot shall be in MS tube with epoxy poder coated and the top of the stool (seat) shall made by stainless steel. The seat shall 16gauge SS sheet. Rest all as per drgHFD-2007 |
| 256 | Screen moveable 3 fold steel |
| 257 | 25mm dia SS 18 gauge tubular shall use for construction of 3 section frame. Good quality of 50mm dia castor wheels shall provide for each legs. Rest all as per drg HFD-2015 |
| 258 | Table bed side Hospital |
| 259 | All Ms tubular shall 18 SWG th and the top of the table bed side shall 16 Gauge SS sheet as per drg. The all steel part shall epoxy powder coated with ivory white or white colour. Rest all as per drg HFD-2005 |
| 260 | Table S/S top for Hosp |
| 261 | Over all size of Table S/S top type-I shall 900x600x900. The all SS frame shall made by 16SWG and the shelves shall made by 18 SWG. Rest all as per drg HFD-2014 |
| 262 | Bed hard steel frame |
| 263 | Overall size shall be 2050mm long, 900mm wide and 400mm high. All Steel shall be of rectangular CR pipe of 18 Gauge.The head board shall be 800mm high and Foot boardshall be 500mm high.The frame of head boardand foot board shall be of 38mmx38mm rectangular CR pipe.18mmx18mm rectangular CR pipe shall be provided in the inner of head board frame/foot board frameas shown in drg.18mm thick both side decorative prelaminated particle MDF board of walnut shade with PVC edging shall be screwed to MS strip arcwelded to 18mm thick rectangular CR pipe with standard workmanship both in head board/foot board 25mmx65mm rectangular CR pipe shall be used to make the long railsand short rails of bed hard and welding/bolting shall be done for fixing long rails to the legs irrespective of what is shown on drg.One stiffener of size 25mmx25mm shall be welded between the two legs ofheadboard over 150mm from the ground level.The top of bed hard shall be of 12mm thick BWR ply of approved make fixed over the four equidistantstiffener of size 25mmx25mm SQ MS pipe in line with bottom of 25x65mm long rail section. PVC shoes shall be provided to legs of bed. All metal /iron work shall be painted two coat of enamel black after doing metal primer.Rest all as per drg FD/E6/MAP/08(R) |
| 264 | Table Computer |
| 265 | Overall size shall be 900mm long,561.20 mm wide and 750mm high. All prelaminated textured MDF board shall use to manufacturing of top ,shelves,drawers,tray. Good quality of telescopic channel shall provide for Key board tray & Drawer of the table. The frame of table shall be of 25MM thick.The top of table shall be provided with PVC / thick teak wood beading.The legs shall be made out of 25mmx50mm MS rectangular CR pipe of 18 guage.Each leg shall be provided with rectangular PVC cover made to shape on front sides only.The legs shall also be provided with nylon buffers .Rest all as per drgFD/E6/MAP/03 |
| 266 | Chair Computer |
| 267 | The Base pedestal assembly of chair computer shall be of dia 700mm and 1060mm high .The pedestal assembly shall be provided with injection molded in black nylon. A 10.5mm dia forged bright Zinc plated MS Castor Pin is of press fitted into each prong for holding the castors. The seat and back of the chair computer shall be made of 12mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam. The back form shall be designed with contour lumber support for extra comfort with PVC lipping allround.The back rest shall be adjustable and consist of drop lift mechanism and shall be adjusted in the insert .It shall be scratch and weather resistant. Rest all as per drg FD/E6/MAP/01 and as per sample approved by BSO/GE |
| 268 | Chair School with hand board |
| 269 | Over all size shall be of 585 mmWx300 mm Dx738 mm H.25mm dia 16 Gauge MS tube shall be provided for steel frame.Paint synthetic enamel colour black 1st class shall be used two coats over a coat of primer.One piece PVC Seat and Back shall be provided. All Diamensions, shape and size shall be followed as per drg.The hand board shall made prelaminated MDF board covered with PVC edging. All joints, fixing shall be done in accordance with standard specifications. Rest all as shown on drg FD/E6/MAP/05 |
| 270 | Chair writing (MAP) |
| 271 | The frame of the chair shall be of MS tubular frame powder coated ,cantilever type of size 25mmx10mm in section. Back form shall be designed with contoured lumber support for extra comfort.120mm thick hot pressed plywood upholstered with superior quality fabric and moulded polyurethane foam with PVC lipping alround shallbe provided at seat and back.PU arms shall be of superior quality and reinforced with MS insert.It shall be scratch and wheather resistant..Steel portion of chair shall be painted with two coats of synthetic enamel paint of black colour over a coat of primer.Rest all specifications areas per drg FD/E6/MAP/12and directed by Engr-In-Charge |
| 272 | Charpoy IP hard top (MAP) |
| 273 | Overall size shall be 1980mm long, 900mm wide and 440mm high.Two long rails and two short rails shall be of 25mmx65mmx16 gauge MS rectangular pipe .The legs shall be of size 32mmx32mmx16 gauge welded to long and short rails as shown on drg.Two stiffeners of size 25mmx25mmx16 gauge shall be provided in equidistant between two opposite long rails. Six number cleat of size 25mmx60mmx6mm shall be welded with frame to support ply. Two stiffeners joining legs of size 25mmx25mmx16 gauge shall be provided at 150mm from ground level .12mm thick commercial plywood shall be provided for top as shown on drg with proper nut and bolt, one nut and bolt shall also be provided at centre of each stiffeners for fixing the plywood irrespective of what is shown on drg..PVC hard rubber shoes shall be fixed at bottom of each leg. All steel surfaces shall be painted with synthetic enamel black in color before applying a coat of primer.Rest all as per drg FD/MAP-II/01 |
| 274 | Table bed side MAP |
| 275 | (a) Table bed side shall be made to the shape, size and design as shown on drg and shall be manufactured in accordance with relevant IS.(b) Frame: All Tube shall be of 18mm square MS pipe having wall thickness of 18 gauge. Frame shall be as shown on drawings, however additional two numbers top side rails on both sides and two numbers bottom side rails connecting front & rear legs shall be provided of 18mm square MS tube as specified. Additional front bottom rail connecting both front legs and rear bottom rail connecting both rear legs at 50mm from the bottom of legs shall be provided of 18mm square MS tube as specified.(c) BACK: Back of the table Bed side shall be in single piece made with 18mm Pre laminated MDF board irrespective of what shown on drawing.(d) Drawers : Side, Back and Bottom of the drawer shall be 12mm Prelaminated MDF board with PVC edging all around the exposed view and the front of the drawer shall be 18mm prelaminated MDF board with PVC edging / 44mm teak wood beading as shown on drg.(e) Finishes : All exposed wooden surfaces of timber and teak veneered surfaces shall be French polished. Steel surface shall be black powder coated.(f) All other items / fittings shall be as shown on drawing and provided as per relevant IS and trade engineering norms / pattern.(g) Wherever particle board is shown / specified in drawing, the same shall be amended to read as MDF board of same thickness.(h) Each drawer shall be provided with 02 Nos telescopic channel of superior quality. All as shown on drawings FD/E6/MAP/15(R). |
| 276 | Teapoy verandah MAP |
| 277 | Overall size shall be 700mm long 400mm wide and 540mm high. The legs, top centre stiffener, top rails and bottom rails shall be of 18mm square MS pipe of wall thickness 1.6 mm.Base tray made of 5mm dia MS bar12x10 nos at equidistantshall be made and fixed as shown on drg.The top shall be of 18mm thick pre laminated Textured MDF board of approved shade and the edges shall be covered with PVC/ teak wood beading. Hard rubber shoe shall also be fixed to the bottom of each leg.The steel frame shall be painted with synthetic enamel black colour.Rest all as per drg FD/E6/MAP/17 |
| 278 | Rack rifle rack for 20 riffles |
| 279 | Rack rifle for 20 rifle shall be made to the shape size and design as shown on drawing and shall be manufactured in accordance with releveat IS. All wood work shall shaisham/Sal/Teek all as per BTD096 |
| 280 | Rack rifle rack for 20 CMG |
| 281 | Rack rifle for 20 cmg shall be made to the shape size and design as shown on drawing and shall be manufactured in accordance with releveat IS all as per BTD096 |
| 282 | Rack rifle rack for 10 riffles |
| 283 | Rack rifle for 10 rifle shall be made to the shape size and design as shown on drawing and shall be manufactured in accordance with releveat IS/as per BTD096 |
| 284 | Chair executive revolving Model DEC1001N/EEZY 268 or equivalent |
| 285 | Chair executive revolving model shall be of EEZY model No 268 or equivalent make from Durian / Nilkamal / Godrej as approved by GE (TP) |
| 286 | Chair barber with adjustable back rest & height |
| 287 | Chair barber shall be Model No IK-2687 of Ikonic Furniture / Professional or equivalent of Marc saloon furniture. The redymade item shall be procured and model as approved by GE (TP). |
| 288 | Chair Multi Seater set of 03 |
| 289 | Chair multi seater with 3 seat model shall be of EEZY model No 1450 or equivalent make from Cello / Nilkamal / FETHERLITE as approved by GE(TP). |
| 290 | Display board 6\" x 4\" |
| 291 | Display board shall be Sliding Glass Felt Notice Board 1800x1200 of Alkosign or Equivalent as approved by GE (TP). |
| 292 | Drugget 3mtr x2mtr |
| 293 | Drugget shall be 3mtr x 2mtr the ready made item as per IS 697:2005 shall be procured as approved by GE (TP) |
| 294 | Bath Mat PVC |
| 295 | All as per drg FD/E6/MAP/07 over all size shall be 400x300 made out of 5mm thick PPCP. Make: Cello / Nilkamal or equivalent |
| 296 | Receptacle PVC |
| 297 | Receptacle PVC shall be capacity of 30 Ltr as shown on drgFD/E6/MAP/13. Make: Cello / Nilkamal or equivalent |
| 298 | Washing machine, package type with loading capacity of 25-30 kg, front loading, open pocket, heavy duty, high spin, top suspension,full stainless steel cabinet, powder / liquid detergent, compartment , electrically heated, stainless steel inner cylinder, outer drum loading door, front SS, inner basket having three lifter design, single motor with variable frequency inverter drive for various speeds for wash, distribution low, normaland high spin, tuned suspension for vibration less performance, fully programmable micro process with fault indication stystem, solenoid operated water inlet valve, electrically operated ( Motorised) drain valve, operates on 415 V, 3 Phase 50 HZ complete all as per manufacturer\"s instructions. |
| 299 | Drying tumbler electrically heated and operated having frontloading type auto time, auto stop, auto reverse with fully die pressed door. Inner basket stainless steel,outer drum double walled insulated with glass wool of capacity30 kg per charge all as specified. |
| 300 | Subtotal |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
