Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 07-02-2026 | Corrigendum No 1 | BOQ | 24-02-2026 |
| 2 | 07-02-2026 | Corrigendum No 1 | BOQ | 24-02-2026 |
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster any description on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc and rubbish off the premises complete all as specified & directed. |
| 2 | M&L cement plaster in two layers on stone / Brick masonry surfaces or surfaces other than fair face of brick work ,first layer 15 mm thick in cement mortar (1:6) and second layer 5 mm thick in cement mortar (1:4) with WPC @ 3% by weight of cement, finished the surfaceseven and smooth without using extra cement complete all as specified & directed. Note:- WPC will measured and paid seperated as supply only. |
| 3 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6),and in finished the surfaces even and smooth without using extra cement complete all as specified & directed. |
| 4 | M&L for rendering 15mm thick on surfaces other than fair faces of brick work/stone or concrete surfaces in cement mortar (1:6),and in finished the surfaceseven and smooth without using extra cement complete all as specified & directed. |
| 5 | M&L for prepration of newly plastered wall surfaces & applyingnecessary levelling course to the surfaces of walls and applying two coat of interior of oil emulsion over a coat of wallprimer incuding wall care puttycomplete all as specified & directed. |
| 6 | M&L for rendering 5 mm thick on fair faces ofconcrete surfaces in CM (1:3) in ceiling complete all as specified and directed. |
| 7 | M&L for applying three coats of white wash on newly plastered ceilingsurfaces including preparation of surfaces complete all as specified & directed. |
| 8 | M&L for complete removal of existing treatment on wall and prepration of old surfaces & M&L for applying necessary levelling course to the surfaces including properly making of v shape crakes and filling of all crakes with crakes seal and including applying two coat of interior oil emulsion over a coat of wall primer incuding wall care putty complete all as specified and directed. |
| 9 | M&L for complete removal of existing treatment on walls and prepration of old surfaces smooth with sand paper and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm including one coat of putty) including properly making of v shape crakes and filling of all crakes with crakes seal of walls complete all as specified and directed. |
| 10 | M&L for prepration of newly plastered wall surfaces & applyingnecessary levelling course to the surfaces of wallssmooth with sand paper and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm including one coat of putty) including properly making of v shape crakes and filling of all crakes with crakes seal of walls complete all as specified and directed. |
| 11 | M&L for complete removal of existing treatment from old plastered surfaces of ceiling including preparation of old surfaces smooth with sand paper and including M&L for applying two coats of white wash complete all as specified & directed. |
| 12 | Dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed. |
| 13 | Demolition of cement concrete unreinforced in ground floor and pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 14 | Demolition of PCC of floors (other than ground floors) complete all as specified and directed. |
| 15 | Demolition of RCC in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed. |
| 16 | Demolition of cement concrete of any description and inany position etc all as specified and directed. |
| 17 | Dismantiling of stone slabs and tiles (Kota stone etc.)of any discription or any thickness in floors, aprons, skirting, dado, pcc tiles at roof etc.laid bedded and pointed in any mortar complete all as specified and directed. |
| 18 | M&L for 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub bases of floors, etc finished the surface even and rough to receive the topping layer complete all as specified and directed. |
| 19 | M&L for 25 mm thick PCC (1:2:4) type B-0 using 12.5 mm graged stone aggregate as in floors, etc complete all as specified and directed.. |
| 20 | M&L for vitrified , GVTSUPER GLOSSY FINISH coloured and printedtiles of8 to 10 mm thick (Square / Rectangular ) polished area of each tiles not exceeding 0.36 Sqm as in flooring over and including 15 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurryand pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.Note:- Pattern of tiles shall be as approved by AGE. |
| 21 | M&L for vitrified ,GVTSUPER GLOSSY FINISHcoloured and printedtiles of width as directed and8 to 9 mm thick as in skirtingfixed over and including 10 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurryand pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 22 | M&L non-skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match coiour/shade with & including 15mm thick screed bed layer in CM 1:6 complete all as specified |
| 23 | M&L glazed ceramic joint free coloured tiles on vertical surfaces size not less than 600mm x 300mm x 7mm thick over & including 10mm thick renderingin CM 1:4 and pointed in white/coloured cement to match the shade /colour of tilescomplete all as specified & directed. Note:- Pattern of tiles shall be as approved by GE. |
| 24 | M&L for machine cut Kota stone slab 18 mm to 22 mm thick , as in flooring,laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:6 ) complete all as specified and directed. |
| 25 | M&L for machine cut kota stone slab 18 mm -22 mm thick as in riser / steps, skirting, dado,cills and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing , rounding ,over and including 10 mm thick backing coatin CM (1:4) complete all as specified and directed. |
| 26 | Taking down chowkhats or frames with shutters (without taking off shutter from frames) not exceeding 1.5 sqm each complete all as specified and directed. |
| 27 | Taking down chowkhats or frames with shutters (without taking off shutter from frames)exc. 1.5 sq. m but not exc 4.0 sqm each,complete all as specified and directed. |
| 28 | S&F Solid PVC doorframe (single rebated) of size 50 x 47 made out of 5mm thick wood grain printed PVC sheet reinforced with MS Square tube fixing in opening as per specifications and drgs complete all as specified & directed. |
| 29 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails M.S frame shall be covered with heat moulded pre lam colour PVC \"C\" channel having a PVC shut strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail& bottom rail, panelling of pre lamanited colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement. |
| 30 | S&F pressed steel frames of size 125 X 60 mm with rebate on both side including necessary fixing lugs hinges, locks strike plate etc (thickness ofsheet shall be 1.25mm) and making good the plaster of wall in CM 1:6complete all as specified & directed. |
| 31 | S&F for pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness ofsheet shall be 1.25mm) and making good the plaster of wall in CM 1:6complete all as specified and directed. |
| 32 | M&L for Cutting holes in brick walls built in cement or cement lime mortar and stone walls for inserting hold fasts, etc and making good dismantled portion in cement mortar 1:3; cutting exceeding half brick but not exceeding one brick complete all as specified and directed. |
| 33 | M&L for PCC 1:2:4 type B-0(using 12.5mm grade stone aggregate) as in filling of Chowkhats or pressed steel doorframe, in bed block and like, etccomplete all as specified and directed. |
| 34 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 35 | S &F for factory made solid panel PVC door shutter 30mm thick but wire gauge panel i.e panel should be wire gauge in lieu of PVC sheet panel .wire gauge shall be wraped on a additional squre tube 8 mm M.S. solid tube shall be welded to M.S tube and wire guage shall be strechtd tightly firmed ( style) consisting to framemade out ofM.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC\"C\"channel having a PVC sheet strip of 20 mmwidth struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Penelling of plain colour PVC sheet to be fitted in the MS. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and as directed. |
| 36 | S&F Stainless steel wire cloth 0.36 mm nominal dia and wire and average width of aperture 1.40 mm fixed with stainless steel staples complete all as specied and directed. |
| 37 | M&L preparing new surfaces of wood & wood based material over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all asspecified and directed. |
| 38 | S&F Butt hinges medium weight cold rolled mild steel of 100 mmand fixed with screw complete all as specified & directed. |
| 39 | S&F Stainless steel butt hinges 100 mmand fixed with screw complete all as specified and directed |
| 40 | S&F Aluminium alloy, anodised, sliding door bolt, 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed. |
| 41 | S&F Aluminium alloy, anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed. |
| 42 | S&F aluminium anodised barrel tower bolts of extruded section, length of bolt 200 mm and fixed with machine made screws complete all as specified & directed. |
| 43 | S&F extruded aluminium alloy handles 125 mm size, fabricated type anodised, fixed with machine made screws complete all as specified & directed. |
| 44 | S&F in repair mild steel 150 mm, single action spring hinges, mild steel with steel wire spring, stove enamelled, black complete all as specified and directed. |
| 45 | S & Fdoor stopper of aluminium alloy body and tongue 150 mm long , anodised fixed in door with screws etc. |
| 46 | S& F Wndow ECO 4000, doible rebate open /fixed window made of galvanised steel colour coated (base steel as per IS 513 of \"D\" quality ,galvanised as per IS 277 with Zinc of 120gms/sqm) with total thickness of coating 0.58 microns thick and back coated with alkyd backer 5-7 micron thick or powder coated with purepolyster powder up to 50-60micron thick. outer frame section 72 x 55 mm, enter mullion section 72 x 50 mm, shutter section 47 x 20 mm,fly mesh section 40 x 20 mm and the fixed glass beading section 12 x 12mm, outer frame and mullions shall consist rebate for glazed shutter, fly mesh and 20 mm provisiion for guard bars/grills, the sectiion cut to length mitre joined with corner bracket, center millions fixed with mullions cap, stay, handle, latch ,2 nos odf heavy duty stainless steel pivot hinges per shutter and panel,ed with 4mm thick plain flotglass and S.S mesh for fly mesh shutter ( 304 grade), fitted using EPDM (Ethly propelene Diamine moonomer) gaskets including fixing windows in the Concrete/Masonry wall by means of self expanding screw, including 10 mm square bars welded to 6 x12 mm flat at a distance 150mm C/C (pitch) as guard bar etc complete all as specified and as directed. |
| 47 | S&F powder coated aluminium ventilator of 1.50 mm thick half portion louvers with pin headed glass andhalf portion fixed glazed of 4 mm thick pin headed glass with aluminium section weight 0.55 kg/Rm, including fixing of wiremesh from outside fo frame and necessary joining cleats, glazing clips rubber packing, screws, etc all as per sample displayed in the office of GE complete all as specified & directed. |
| 48 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (Including of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed. |
| 49 | S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed |
| 50 | S&F 25 mm bore SS Pipecurtain rods including SS brackets & SS decorative dome, suitablefor door/widows curtain with fancy type SS decorative dooms with ss brackets fitted to each endandfixed to wall with wooden battens incl. removal of existing rod and making goodcomplete all as specified and directed. |
| 51 | M&L 18-20 mm thick pre-polished Granite slab, machine cut, for floors/ shelves, cooking platforms, window cills, steps, jambs and pillar top laid over & including 20mm thick screed in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone complete all as specified & directed. |
| 52 | M&L for rounding, chamfer, splays or arris and smooth finishing at the edges of stone as in steps, cooking platform and other similar locations complete all as specified and directed. |
| 53 | S&F 2nd class hardwood plain, solid stright chowkats and frames, wrought, framed rebated on the solid, rounder or chamfered, put together with glue pinned at joints, complete all as specified & directed. |
| 54 | S&F in repair 18/19mm thick WPC board, prelaminated both face with decorative choice laminations one side and other side balancing white, fixed with screws to timber frame work includingbeading on cutting /exposed edges, polishing for cupboard shutter complete all as specified & directed. |
| 55 | S&F 100 mm longHasp and Staple, safety type aluminium with MS hinge pin incl bolt to hinge plate and fixed with stainless steel screws complete all as specified and directed. |
| 56 | S&F continuous (piano) hinges, width of flaps (when open) 30mm stainless steel, bright finish or electrogalvanised complete all as specified and directed. |
| 57 | S&F 100 mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 58 | S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed. |
| 59 | S&F Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 60 | S&F Mild steel TMT bars 6 to 8mm dia as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 61 | Demolation of brickwork or stone/boulder masonry, built in cement or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and directed. |
| 62 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on surfaces of any description over 10cm width or girth on new steel surfaces including preparation of surfaces complete all as specified and directed |
| 63 | M&L for Treatement for sunken portion of kitchen,toilets etc as per following specifications :-(a) Demolition of lean concrete and other type of filling in sunken portion & cleaned the sunken portion incl horizontal and vertical wall surface complete as directed.(b)Takingdown existing treatment of sunken portion.(c) Water proofing plaster for sunken portionin CM 1:3, 20 mm thick in two coats with water proofing compound at the rate of 2% by weight of cement and finishing the surface even and smooth using extra cement.(d)M&L for applying two coats of Dr fixit compound suitable for sunkun treatment as per manufacturer instructions over vertical surfaces and floors of sunken of toilet including cleaning of surfaces.(e) M&L for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in filling (sunken portion). etc.(f) M&L for PCC 1:2:4 type B 1 using 20 mm graded stone aggregate, mixed with WPC @ 2% by weight of cement, as sub base, 75mm thick.Note :- above includes (a) Test again of water tightness by pounding for 72 hours & rectify defects if any till total elimination of defect.(b) The sunken portion shall be tested for leakage / seepage / dampness by pounding with water for 72 hours. In case any defect is noticed the portion shall be grouted with Dr fixit suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated (c) Horizontalflat area to be measured. |
| 64 | S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing with cantilever brackets and connecting union to pipe overall size 915mm x 460mm; bowl size 410mm x 330mm x 160 mm complete all as specified and directed. |
| 65 | S&F in stainless steel plate rack of Size 900mm x 600mm x 250mm made of 1mm thickj stainless steel sheet complete all as specified and directed. |
| 66 | M&L 75mm thick PCC (1:3:6) Type C2using 40mm graded stone agg as in plinth protection/Path etc surface even and smooth without using extra cement including oint sealing compound of grade A complete all as specified and as diected by engineer in charge. |
| 67 | M&L forPCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in padding on roof surface for correcting / making proper slope on roof, surface finished fair and even without using extra cement complete all as specified & directed. |
| 68 | M&L forPCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges,finished the surface even and smooth without using extra cement complete all as specified and as directed . |
| 69 | M&L for 10mm thick plaster in CM 1:4 mixed with and including water proofing compound @ 3% by weight of cement applied over roof slab complete all as specified & directed.Note : WPC will be measured and paid separately as supply only. |
| 70 | M&L for provn of water proofing treatment to RCC roof with approved modified membrane weight not less than 3 kg/sqm comprising with following items complete all as specified and as directed. (i) The surface of roof, parapet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting.For cast iron drain outlets a groove shall be cut . (ii)Oil based Bitumenprimer conforming to IS-3384-1986 @ 0.3 kg per sqm to be applied on prepared surface till the surface is properly impregnated. (iii) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. |
| 71 | M&L for Cool Roof Tiles 9-10mm thick 300 MM X300 MM Size (Make: Orient Bell or Equivalent ceramic tiles white confirming to sun reflective Index (SRI) value minimum of 90 on 15mm thick 1:3 screed bedcomplete all as specified and directed. |
| 72 | M&L for apply two coats of bituminous aluminium paint over APP membrane @ 0.30 Kg/Sqm complete all as specified and directed. |
| 73 | M&L brick work with fly ash \"bricks(FASB) confirming to IS 12894, of strength M-10 straightor curved on plan exc 6m mean radiusbuilt cement mortar 1:6 complete all as specified and as directed. |
| 74 | M&L RCC M-25 (Design Mix) (using 20 mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary used and waste of form workcomplete all as specified and directed. |
| 75 | M&L for Providing cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed. |
| 76 | M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished fair and even complete all as specified and directed. |
| 77 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped end etc complete all as specified and directed. |
| 78 | M&L PCC 1:3:6 type C1 (20mm graded stone aggregate) as in surface channels and drains complete all as specified and directed |
| 79 | M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:4) in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including use and waste form work complete all as specified & directed. |
| 80 | Supply only Integral waterproofing compound complete all as specified and directed |
| 81 | M&L forbrick work with sub class \"Fly ash brick, in cement mortar 1:4, straight or curved on plan to any radius in half brick thick wall complete all as specified & directed. |
| 82 | Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 15mm bore of pipe complete all as specified and directed. |
| 83 | Taking up or down steel tubing and connetion including cleaning for refixing or removing to store of 20mm bore of pipe complete all as specified and directed. |
| 84 | Supply and laying 20 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall ,ceiling or laid in floors complete all as specified and as directed by engineer in charge . |
| 85 | Supply and laying 25 mm dia .of bore CPVC pipe SDR11 and Plain CPVC SDR11 fittings (ISI ) marked ,concealed or fixed to wall ,ceiling or laid in floors complete all as specified and as directed by engineer in charge . |
| 86 | S&F in repairs 110mm dia PVC(SWR) type B pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and as directed by engineer in charge . |
| 87 | S&F 75in repairs mm dia PVC(SWR) type B pipes single socketed, in any length with rubber ring joints,fixed in Wall/laid in floor complete all as specified and as directed by engineer in charge . |
| 88 | S&F 110mm dia PVC(SWR)pipes bends any radious with acces door complete omplete all as specified and as directed by engineer in charge . |
| 89 | S&F 75 mm dia PVC(SWR)pipes bends any radious.with acces door complete all as specified and as directed by engineer in charge . |
| 90 | S&F 110mm dia PVC(SWR)pipes junction,single (single T/Y ) equal or unequal any radious.with acces door complete all as specified and as directed by engineer in charge . |
| 91 | S&F 110mm dia PVC(SWR) vent cowl complete all as specified and as directed by engineer in charge . |
| 92 | M & L75 mm dia of out letPVC (SWR) floor trap plain withcp grating incl. jointing with solvent cement as in repair complete all as specified and as directed by engineer in charge . |
| 93 | M & L PVC (SWR) gully trap 125 /100plain with gratingincl. jointing with solvent cement as in repair complete all as specified and as directed by engineer in charge . |
| 94 | S&F for in repair PVC valveless syphonic action type flushing cistern low level white with inlet ball valve,float end handle handle including bracket complete of capacity 10 litres, complete all as specified and directed. |
| 95 | S&F for in repairs 15mm angle cock chromium plated,cast copper alloy, with brass ceramic disc spindleand capston heads,scewed down high pressure, with or without lettered \"hot\" or Cold\" with long srewed shanks and fly nuts, srewedfor iron pipe fixed and complete all as specified . Neptuneseries of Prayag or similar in PARRYWARE/CERA /JAQUAR/HINDWARE |
| 96 | S&F for in repairs for 15 mm Stop valve cast copper alloy screwed down high pressure with CAPSTON HEAD handle chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe 15mm bore or for unionscomplete all as specified and directed. MAKE : Neptuneseries of Prayag or similar in PARRYWARE/CERA /JAQUAR/HINDWARE |
| 97 | S&F for in repair 15mm ,bib tap Fancy type long body chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered \"hot\" or Cold\" with long srewed shanks and flynuts, srewedfor iron pipe fixedand complete all as specifiedNeptuneseries of Prayag or similar in PARRYWARE/CERA /JAQUAR/HINDWARE |
| 98 | S&Fin repairs for wall mixer with Two in one pattern in of brass CP, complete all as specified and directed..MAKE : Neptuneseries of Prayag or similar in PARRYWARE/CERA /JAQUAR/HINDWARE. |
| 99 | S&F Sink Mixer With Swinging Spout on Upper Side (Wall Mounted Model) With Connecting Legs & Wall Flanges ..MAKE : Neptuneseries of Prayag or similar in PARRYWARE/CERA /JAQUAR/HINDWARE |
| 100 | S&F for in repairs15mm,pillar tapsFancy type long body chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered \"hot\" or Cold\" with long srewed shanks and flynuts, srewedfor iron pipe complete all as specified . Make :Neptuneseries of Prayag or similar in PARRYWARE/CERA /JAQUAR/HINDWARE |
| 101 | S&F for shower rose brass chromium plated without swivel joints, 100 mm in size including fixing to steel pipe complete all as specified and directed fixedin repairs, complete all as specified and directed. |
| 102 | M&L vitreous china squatting pan, orissa pattern sise 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps connection to trap and to flushing pipe to complete fixed in repairs and making good to floor complete. |
| 103 | S&F for in repairsofvitreous china wash basin, white,size 550 x 400mm Including 32 mm waste coupling ,waste pipe and labour for fixing pillar tap ,pvc connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. . Note : Pillar tap andPVC connection will be measured paid separetly. |
| 104 | Supply only15mm dia PVC connection with PTMT nuts of length 450 mm complete all as specified and directed. |
| 105 | S&F for in repairsLooking mirror 5 mm to 6 mm thick with fixing brackets ,screws, pvc rawal plugsetc. complete all as specified and directed. |
| 106 | S&f corner glass shelf 300mm ( with ABS Bracket ) complete all as specified and directed. |
| 107 | S&F in repair Soap dish of CP fixed with pvc rawl plugs and screw complete all as specified and directed. |
| 108 | S&F in repair CP tubular towel rail D type 20mm dia and 60cm long complete all as specified and directed. |
| 109 | S & F Peg set of six S.S.fixed to wall with PVC plugs and screw complete all as specified and directed. |
| 110 | S& F 1000 Ltr capacity of rotational moulded polyethylen water storage tank (Cylindrical vertical with closed tap) hoisted and fixed in position including S&F 25mm dia CPVC pipe medium grade washout pipe 450mm long with plug and 25mm dia CPVC pipe medium grade overflow pipe 600 mm long with fittingcomplete all as specified and as directed by the Engineer-In- Charge. |
| 111 | S & F 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 m m - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all as specified and directed. |
| 112 | S & F in repair gun metal globe / gate value with iron wheel head screwed both ends for iron pipe of 20mm bore complete all as specified and directed. |
| 113 | M&L for PCC Type D2 (1:4:8) using 40mm graded stone agg as in foundation filling mass concrete, complete all as specified and directed. |
| 114 | M&L for vitrified paver color tiles 40 cmx40cmx9 to 10 mm thick, moulded set jointed and pointed in neat cement slurry with grey cement and pigment, in floors, over and including 15 mm thick screed bed orbedding layer of cement mortar (1:6)complete all as specified and directed. |
| 115 | M&L for preparation surfaces for building Nosand applying one coat of synthetic enamel paint and writing letters or figures (Block, Roman, Italic or Indian) of n exc 10cm height, width of letter shall not be less than 15mm, including stops, commas, lines, brackets and making outer boarder with approved tint of synthetic enamel thick paint complete all as specified and as directed. |
| 116 | M and l for repairing of RCC projection, chajja, facia, column etc by necessary preparation (i.e. scraping, cutting, chiseling, dusting and cleaning exposed reinforcement surface of damaged/ loose surface and applying one coat of cement slurry and filling the surface with plain cement concrete (1:1.5:3) reinforced with welded mesh and make good by15mm thick plaster with cm (1:4) and ( Chemical coating used) including scaffolding/formwork etc upto double storey height complete all as specified and directed by engineer in charge. |
| 117 | S&F in repairs40 mm dia .of bore UPVC pipe Plain UPVCfittings (ISI ) marked ,concealed or fixed to wall ,ceiling or laid in floors complete all as specified and as directed by engineer in charge . |
| 118 | S&F band, straps,supports or stay for rainwater,ventilating pipes, including bolts if required hookes (stay) heavy for large gates hook and pintle hinges large hasps and staples, chains hand made sliding bolts clamps hold fasts wall ties hooks for hanging fans plain angle cleats for securing purlin to wood trusses or rafters knee piece inserts two way and three way straps plate wahers and similar small articles confirming to Fe 290 Gde 165complete all as specified and directed. |
| 119 | Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and as directed. |
| 120 | Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth for sewage line, manhole etc not exceeding 10 sqm on plan and getting out in hard /denseof soil complete all as specified and as directed. |
| 121 | Demolition and breaking drain pipe (salt glazed stoneware) of 150mm dia set in cement mortar including packing under and haunching against side of pipe complete all as specified and as directed. |
| 122 | M & L cement concrete bed to drain pipe 200mm dia including packing under and haunching against side of pipe after they are laid and tested in cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate complete all as specified and as directed. |
| 123 | S&F for reinforced concrete pipes 200 mm bore class NP-2 laid and jointed with collar in CM 1:1 complete all as directed by Engr-in-Charge |
| 124 | M & L PCC 1:2: 4 type B-1 using 20 mm graded store aggregate as in surface channel, drains etc including use and waste of form work where necessary complete all as specified and as directed. |
| 125 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using forms, moulds, mitred/stopped ends etc. |
| 126 | Returning, filling in, including spreading, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and as directed. |
| 127 | Removing excavated material to a distance n exc 50M and deposited where directed at a level n. exc 1.5M above the starting point complete all as specified and as directed. |
| 128 | Taking down carefully copper/ aluminium point wiring (light, fan, socket, or power) complete fitting such as switches, ceiling roses pendants, regulators, sockets, light fitting ceiling fan etc to be measured seperately ) removing materials for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperatly) and making good disturbed surface of walls floors etc all as specified and directed. Note-Responsibility after taking down fan/exhaust fan keep in safe custody of contractor and refix the same afterbefore completion of work the rate of same deemed to be included in the item quoated rate. |
| 129 | Taking down carefullyexisting wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size anycapacity fromboards completeall as specified and as directed. |
| 130 | Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed. |
| 131 | M & L for concealed point wiring One light point controlled by one switch complete with PVC insulated and unsheathed flame retardant low smoke and halogen ( FRLSH ) cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 20 mm dia, clip, with MS terminal boxes (not less than 1.6mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dollywith3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green multi stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed. |
| 132 | Ditto all as per item No 131 above but one exhaust fan controlled by one switch and regulator. |
| 133 | Ditto all as per item No 131 above but 5 Amp socket outlet point controlled by one switch on independent board. |
| 134 | Ditto all as per item No 131 above but 5 Amp socket outlet point controlled by one switch on same board. |
| 135 | Ditto all as per item No 131 above but one bell/buzzer point controlled by one switch . |
| 136 | Ditto all as per item No 131 above but one light pointcontrolled by two way switch with cable 1.5Sqmm. |
| 137 | S&F modular socket 20Amps with MCB 20Amp \"C\" type complete all as specified and as directed. |
| 138 | Description all as per item No 131 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 2.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed. |
| 139 | S&F switch pianoflush button type 5 Amp single pole one waycomplete all as specified and asdirected. |
| 140 | S&F socket outlet 2 in 1,3pin, 5 Amp flush type complete all as specified and asdirected. |
| 141 | S&F switch pianoflush button type 5 Amp two waysingle phase confirming to pole one waycomplete all as specified and asdirected. |
| 142 | S&F switch pianoflush button type 16/20 Amp single pole one way complete all as specified and asdirected. |
| 143 | S&F socket outlet2 in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and asdirected. |
| 144 | S & F delux Fan Regulator whiteelectronic rotary, socket type 240 Volt50 Hz complete all as specified as directed. |
| 145 | S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittingscomplete all as specified as directed |
| 146 | S & F 9W/10W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. Make C&S Cat No LTHPLEDLAMP7W/B22 or equivalent make as specified in Appndx\"B\" to PS . |
| 147 | S&F TPN DB-DPX 125 MCCB DBs 4 way single door with provision for DPX 125 MCCB and as incomer and SP/TP MCBs as outgoing Nos of modules DPX 125+12, including 125 Amp MCCBcomplete all as specified and directed. |
| 148 | S&F MCCB 4 pole, 415V, AC , 3 phase, 50 HZ, breaking capacity 16 KA with fixed thermal and fixed magnetic setting of capacity 63 Amps 100% ICU complete all as specified and as directed. |
| 149 | S&F ceiling rose,surface polycarbonate63 x50mm three terminals completeall as specified and asdirected. |
| 150 | M&L, sub main wiringwith two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and includingnon metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 20 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed.(NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chasesin wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface. |
| 151 | S&F sheet metal enclosure double doorconcealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar SPN DB 8 ways 240 V complete all as specified and as directed . |
| 152 | S&F MCB single pole and neutral 40 Amp / 63 Amp 240 V ,10KA , \"C\" series, complete all as specified and as directed with copper lugs |
| 153 | S&F MCB single pole 6 to 32Amps 240 V,10KA, \"C\" series,complete all as specified and as directed |
| 154 | Excavation in trenches not exceeding 1.5M wide and not exceeding 1.5M in depth for laying of pipe/cables etc and getting out incl forming bottom surface to required level/slope e etc not exceeding 10 sqm on plan and getting out in any type of soil complete all as specified and as directed. |
| 155 | S&F electric well, AC 230 Volts, single pole, ding dong type complete all as specified and directed . |
| 156 | S&F piano bell push, piano type 6 amp SP one way complete all as specified and as directed |
| 157 | Supply and fixing in repair 22 W LED 6000kDecorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 28watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and directed by Engr-in- Charge. |
| 158 | Supply and fix LED 35/36 W building security light fitting,5700 K energy saving & environmental friendly long life versatile pressure die cast aluminiumIP 66.road way luminare with high power LEDs as light source and electronic driver suitable for pole dia 35 mm including 35 mm dia light grade tube bracket ,bend to shape 1.80 mtrlength with two nos of clamps of size 50mm x 6mm with nuts and bolts,washers etcincluding connection with 1.5sqmm threesinglecorePVC insulated and PVC sheathed cable stranded copper cable upto ceiling rose and fixing on walls/pole complete all as specified and directed. |
| 159 | Supply and laying or fixing or passing through HDPE pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with gaivanised steel or strip and overall PVC sheathed, 25 Sqmm 4 core ISI marked as per IS 7098(Part 1) including connecting on LT OH line/LT panel/DB with suitable lugs, glands, binding wire etccomplete all as specified and directed by Engineer-in-Charge. |
| 160 | Supply and Fixing Exhaust fans AC single phase 230/240V of size 300 mm sweep, 1250-1350 RPM with louvre complete including with all arrangement of making holes on wall, making good and finishing of disturbed surfaces matching with the existing surfaces, necessary fixing arrangement such as fastener bolts, nuts, washers etc, of appropriate size all as specified and as directed |
| 161 | Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etcfor protection of LT cable XLPE grade 1100 volts complete all as specified and directed by Engineer-in-Charge. |
| 162 | M&L pipe galvanised iron of size 50 mm dia, light grade ISI marked, complete with fittings laid in trenches/ fixed with poles etc as protection to cables complete as ditrected by Engineer in Charge |
| 163 | M&L for earthing completewith galvanisedsteelearth plateelectrode of size 600 mm x 600 mm x 6 mm thickweithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade)and watering pipe 20 mm bore GI pipe(light grade) andchamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg.50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and saltcomplete and earth leadconnected to earthing test point (up to main switches, DBs) completeall as specified &testing on completion. NOTE:-(I)item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii)PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra costof additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate. |
| 164 | Supply and fix LED T/L fitting complete withbasic all purpose surface and wall mounted LED batten with aluminium housing and integrated electronic driver 10 Watt capacity 2 feet long and including connection from ceiling rose complete all as specified and as directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
