Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Scheduled Items |
| 2 | Taking down the Chowkhats or frames not exc. 1.5 sqm each (without taking off shutters from the frames) complete all as specified and as directed |
| 3 | Taking down the Chowkhats or frames exc 1.5 sqm but n exc 4 sqm each(without taking off shutters from the frames) complete all as specified and as directed |
| 4 | M&L for IInd class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed. |
| 5 | M&L for 35 mm thick IInd Class Hardwood plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressuretreated complete as specified and directed. |
| 6 | S&F 35mm thick, glazed/skelton shutters with second class hard wood,open rebated and prepared to receive glass, gauge, etc (without sash bars)edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc, sizes of members of shutter as specified in SSR Part I Section 8, clause 8.24 (a) complete as specified and directed. |
| 7 | Supply and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 8 | S&F for Factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing in SSR Part II 2010 complete all as specified and as directed |
| 9 | S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 complete all as specified and as directed |
| 10 | M&LPCC 1:2:4 type B0 (using 12.5 mm graded aggregate) as in hold fast and filling of steel chowkhat etc. complete all as specified and directed |
| 11 | S&F for mild steel flat iron as in hold fast 25x6 mm confirming to Fe290 Gde E-165 complete all as specified and directed |
| 12 | S&F100 mm long Butt hinges, medium weight, cold rolled mild steel fixed to Chowkats complete all as specified and directed |
| 13 | S&F Aluminium Handle 150 mm long cast type, anodised extruded fabricated type complete all as specified and as directed. |
| 14 | S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and directed. |
| 15 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 16 | S&F for 375 mm mild steel ordinary rat tail rod pattern springs including roller and roller platecomplete all as specified and directed |
| 17 | S&F for Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 18 | Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) (A) Area not exceeding 2.00 sqm each complete all as specified and as directed. |
| 19 | S&F for 5.5 mm thick sheet glass ordinary quality and glazed with oil putty or fixed with beads in square exc 0.5 Sqm in each pane omplete all as specified and as directed. |
| 20 | M&L for Preparation of new or untreated surfaces of wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over pink primer complete all as specified and as directed. |
| 21 | M&L for painting steel and iron surfaces ofsteel surfaces of any description, over 10cm in width or girth, not otherwise described, applying two coats of synthetic enamel paint over coat of red oxide primer including preparation of new surface complete all as specified and directed |
| 22 | S&F for mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 23 | M&L for 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & otherside balancing white lamination, fixed with screws to timber framework and fixed with wooden beading complete all as specified and as directed |
| 24 | S&F 40mm dia cub board knob brass polished fixed with nut screw and washer of brass polished complete all as specified and as directed. |
| 25 | S&F for ball catches with 8mm dia steel ball and brass body and striking plate incl letting in and fixed complete all as specified and as directed. |
| 26 | Demolition of brickwork or stone/ boulder masonry, built in Cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed |
| 27 | M&L Brick work with modular fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed |
| 28 | M&L for taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 29 | M&L for rendering 15 mm thick on fair faces of external wall of brick work or stone surfaces in cement Mortar in 1:4 and finished the surface even and smooth (without using extra cement) complete all as specified and directed. |
| 30 | M&L for rendering 10 mm thick internal wall on fair faces of brick work or concrete surfaces in cement Mortar in 1:6 andfinished even and smooth (without using extra cement) complete all as specified and directed. |
| 31 | M&L for rendering 5 mm thick on ceiling in cement mortar 1:3 finished even & smooth without using extra cement complete all as specified and directed |
| 32 | Supply only Liquid water proofing compound for external wall plastering (for 5 mm thick plastering) complete all as specified and directed |
| 33 | M&L for preparation of newly plastered surfaces ofwalls andapplying two coats ofdistemper-oil-emulsion over a coat of primer including 3 mm thick wall care putty complete all as specified and as directed. |
| 34 | M&L for complete removal of existing treatment and applying two coats of walls with distemper oil emulsion white or tinted over alkali resistant primer including 3 mm thick wall care putty complete all as specified and as directed. |
| 35 | M&L for preparation of newly plastered surfaces ofceiling andapplying two coats ofdistemper-oil-emulsion over a coat of primer including 3 mm thick wall care putty complete all as specified and as directed. |
| 36 | M&L for complete removal of existing treatment on ceiling and applying two coats distemper oil emulsion white or tinted over alkali resistant primer including 3 mm thick wall care putty complete all as specified and as directed. |
| 37 | M&L for preparaion of newly plasteredsurfaces of walls andfinishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)complete all as specified and as directed. |
| 38 | M&L for complete removal of existing treatment on wall including removal of vegetation and apply finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed. |
| 39 | M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of cement mortar in 1:6 for laying floor finishes complete all as specified and as directed |
| 40 | M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick back coatof cement mortar in 1:4 complete all as specified and as directed |
| 41 | M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of cement mortar in 1:6 for laying floor finishes complete all as specified and as directed |
| 42 | M&L for Coloured Glazed ceramic tiles in vertical surface of size 450X 350X 7 mm thick over 10 mm thick back coat of cement mortar in 1:4set and jointed in neat cement slurry and pointed in white or colour cement to match over complete all as specified and as directed. |
| 43 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed |
| 44 | Dismantling of water tank Capacity exc 500 not exc 1000 Ltrs and removing to store complete all as specified and as directed |
| 45 | Supply and Fixing of rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of capacity 1000 ltrs hoisted and fixed in position specified in SSR Part I complete all as specified and as directed. |
| 46 | S&F for 25 mm bore, Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. |
| 47 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) ,complete all as specified and as directed |
| 48 | S&F for Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device,complete all as specified and as directed |
| 49 | S&F in repairs vitreous china wash hand basin white flat back size 550x400mm excluding taps, waste chain and plug and porcelain stopper including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and as directed. |
| 50 | S&F in repair pillar taps of size 15mm, chromium plated fancy type cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered \"Hot\" or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed. |
| 51 | S&F in repairs PVC low level flushing cistern 10 litre capacity, valveless, symphonic action type with inlet, ball valve, float and handle incl bracket, PVC conection pipe andflush pipe of polyethylene of low or high density or PVC. 32 mm dia complete all as specified and directed |
| 52 | S&F for PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed |
| 53 | S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed |
| 54 | S&F in repairs Tubular towel rail, 20mm dia, D type, 60cm long Brass Chromium plated between flanges complete all as specified and as directed |
| 55 | S&F in repairs Brass chromium plated shower rose 125 mm sizefixing to steel pipe or union complete all as specified and as directed |
| 56 | M&L PVC (SWR) floor trap 75mm dia, plain with grating including jointing with solvent cement including disconnection of old existing trap, and connected with existing water pipe complete all as specified and directed. |
| 57 | S&F for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed |
| 58 | S&F in repairs for bib taps fancy type CP with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferule and fixed of size 15mm bore in repair complete all as specified and as directed. |
| 59 | S&F in repairs 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed |
| 60 | S&F in repairs 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed |
| 61 | S&F for110 mm bore PVC (SWR) bends any radius complete all as specified and as directed |
| 62 | S&F for75 mm bore PVC (SWR) bends any radius complete all as specified and as directed |
| 63 | S&F for 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed |
| 64 | S&F for 75mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and as directed |
| 65 | S&F for PVC (SWR) cowl of 110 mm dia complete all as specified and as directed.. |
| 66 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed |
| 67 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed |
| 68 | Supply and laying of 25mm of CPVC pipes SDR 11& Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.tranches complete all as specified and directed. |
| 69 | Supply and laying of 20mm of CPVC pipes SDR 11& Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.tranches complete all as specified and directed. |
| 70 | S&F for 20mm dia CPVC Brass thread elbow complete all as specified and as directed. |
| 71 | S&F for 20mm dia CPVC Brass thread Tee complete all as specified and as directed. |
| 72 | S&F for 25mm CPVC Brass thread union complete all as specified and as directed. |
| 73 | S&F for 25mm CPVC tank adopter complete all as specified and as directed. |
| 74 | S&F for 25mm CPVC ball valve complete all as specified and as directed. |
| 75 | M&L for cutting chases, pinning in brickwalls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20 cm girth complete all as specified and as directed. |
| 76 | S&F for 20mmstop valves(concealed type),cast copper alloy fancy type chromium plated, long sunk and cup, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 77 | Demolition of unreinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 78 | M&L for 75 mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) in plinth protection, finishing cement concrete surface even and smoothwithout using extra cement complete all as specified and as directed |
| 79 | M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade A complete all as specified and as directed |
| 80 | M&L for 100 mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) in subbase of floor etc complete all as specified and as directed. |
| 81 | M&L for chequered cement concrete tiles 20cmX20cmX25mm thick, set, joined and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and directed. |
| 82 | Demolition of Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 83 | M&L for Reinforced cement concrete (Nominal Mix) type B1 1:2:4 (20 mm graded aggregare) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 84 | Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc rough finished flat surface of concrete complete all as specified and as directed. |
| 85 | M&L for 40 mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) in sub base finishing cement concrete surface even and smoothwithout using extra cement complete all as specified and as directed |
| 86 | M&Lfor 20 mm thick Granite (of any type) work (table rubbled and polished) in steps, Jambs, Pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm screed complete all as specified and directed |
| 87 | S&F in repairs Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed. |
| 88 | M&L for Providing precast cement concrete manhole covers, Type B1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:4 complete all as specified and as directed |
| 89 | S&F in repairs soap dish vitreous china coloured approximate size (160mmx160mmx90mm) complete all as specified and as directed. |
| 90 | M&L for 25 mm thick Cement concrete type B-0 1:2:4 (12.5 mm graded aggregate)complete all as specified and as directed |
| 91 | S&F for PVC waste pipe of 32 mm size flexible and 1.2 mtr long, fitted to basin or sinkcomplete all as specified and as directed. |
| 92 | S&F20 mm diaAngle stop cock with wall flange all as specified and directed. |
| 93 | S&F forCorner shelf glass complete all as specified and directed |
| 94 | S&Fin repair 1 mmthickstainlesssteelplaterackof size 900x600x200mmincludingfixing with rawal plug ang screwscomplete all as specified and directed. |
| 95 | S&F in repair health faucet cast copper alloy with push button & 1m long flexible steel pipe with PVC lining suitable for 20mm bore pipe complete all as specified and directed. |
| 96 | S&F for20mm dia two way bib cock CP complete all as specified and directed. |
| 97 | M&L Water proofing treatment on RCC roof etc. comprising with the following operation & as specified herein below:-(a) Taking down existing roof treatment with PCC pedding including cleaning & removing debris to a distance exc 100 m n.exc.250m. (b)Providing for 15 mm thick cement mortar with WPC in 1:4over PCC when concrete is green.(c) Preparing & cleaning of fully dried cement plastered surface. (d) Applying one coat of cold bituminous primer to the plastered surface @ 0.25 litres per sqm conforming IS-3384. (e) APP based polymeric membrane membrane 3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyster non woven fabric(weighing not less than 160 gms/sqm) shall be applied over bituminous primer as specified above.Application of polymeric membrane shall be by torch application. The over lap shall be minimum 100 mm on transverse direction and 100 mm in longitudinal direction.(f) One coat of aluminium paint over APP membrane @0.11Kg/Sqm. |
| 98 | Excavating in post holes (or similar holes) each n exc 0.5 cum in soft soil/loose soil andgetting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and as directed. |
| 99 | M&L for Cement concrete Type D- 2 1:2:4 (40 mm graded aggregates) in foundations, filling and mass concrete complete all as specified and as directed. |
| 100 | M&L for Cement concrete Type D- 2 1:4:8 (40 mm graded aggregates) in foundations, filling and mass concrete complete all as specified and as directed. |
| 101 | S&F for Joist, channel, angle, or tee sections of Fe 410-W (Gde E-165) fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and as directed. |
| 102 | S&F for struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. conforming to Fe-290 Gde E-165 ,complete all as specified and as directed |
| 103 | Supply only Chain link MS galvanisd fencing any size and type complete all as specified and as directed. |
| 104 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire ,complete all as specified and as directed |
| 105 | S&F for Mild steel screw bolts diameter of neck 11 to 15 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5 cm long complete all as specified and as directed. |
| 106 | M&L for PCC in 1:2:4Type B0 ( 12.5 mm graded aggregate) asin lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs,, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, filling of pressed steel door frames complete all as specified and directed. |
| 107 | M&L for preparaton of new or previously untreated steel surfacesof any description over 10cm width or girth not otherwise described as directed and apply two coats of synthetic enamel paint over red oxide complete all as specified. |
| 108 | Excavating in trenches n.exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 109 | Returning, filling in, including spreading levelling, watering and well ramming in layers nexc25 cm in soft/loose soil complete all as specified and as directed. |
| 110 | Removing Excavated material not exceeding 50M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and as directed. |
| 111 | Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter of flat rough finished surfaces of concrete complete all as specified and as directed. |
| 112 | M&L for Reinforced cement concrete (Nominal Mix) type B1 1:2:4 (20 mm graded aggregare) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass complete all as specified and as directed. |
| 113 | Use and waste Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc rough finished flat surface of concrete complete all as specified and as directed. |
| 114 | M&L for Reinforced cement concrete (Nominal Mix) type B1 1:2:4 (20 mm graded aggregare) in Columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 115 | S&F for rolled mild steel in steel worktubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed. |
| 116 | M&L for Mild steel TMT bars 10 mm dia and over ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed. |
| 117 | M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clipscomplete all as specified and as directed |
| 118 | Taking down copper/aluminium point wiring power complete incl fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per conditions seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed a site. |
| 119 | Taking down old/unservicebale distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/Maint Switch inclluding old unserviceable MCCBs/MCBs Isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 120 | Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed/existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 121 | M&L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 4 Sq mm (nominal area), two single core, PVC insulated and unsheathed FRLSH Cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ivory colour including all accessories after chasing in wall/ceiling etc. heavy duty ISI marked including grade for 5/20 amps switch socket cobmination point necessary running of 4.0 sq mm copper conductor FRLSH cable of multistranded PVC insulated unsheathed as earth continuity conductor along with wiring and connecting to the common eath dolly including cutting, chasses and making good disturbed surface to match with existing finish with plater complete all as specified and directed by Engr-in-charge. |
| 122 | M & L for sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC condiut of white /ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and directed. Note :- Two runs of 6 sqmm cable, one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit. |
| 123 | M & L for sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 10 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC condiut of white /ivory colour and its accessories ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 10 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and directed . Note :- Two runs of 10 sqmm cable, one run of 10 sqmm cable and one run of PVC conduit will be measured as one unit. |
| 124 | S&F in factory made epoxy polyester powder coated distribution board TP & N 4 way (VTPN MCCB DB) with metal double door (IP-43 protection) fabricated from minimum 1.6 mm thick CRCA sheet and fixed on wall and suitble for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with provn for DPX 125, 4 pole MCCB and ELM as incommer and MCBs outgoings complete all as specified and conforming to IS: 8623 along with cable and box for above DB including taking down old DBs all as specified NOTE :-(a)MCBs shall be measured and paid separately.(b) All cables terminating into MCBs shall be connected by using suitable kcopper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch. |
| 125 | S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 126 | S&F for sheet metal enclosure MCB DB SPN 16 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed |
| 127 | S & F on distribution boards, MCCB three pole, 100 Amps, ultimate breaking cap 16 KA with adjustable thermal /electrical release for overload ranging from 70% to 100% of the rated current and fixed magnetic release for short circuit and under voltage release complete conforming to IEC 60947-2 and IS : 13947-3 with all accessories complete all as specified and directed. |
| 128 | S & F for MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed |
| 129 | S & F for MCB Single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed |
| 130 | S & F for MCB Single pole and neutral rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed |
| 131 | S & F for metal clad box suitable for 230 volts 50 Hz AC supply three pin with MCBSP 20/32 Amps including removal of old unserviceable onecomplete all as specified and as directed |
| 132 | M & L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 cm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4 mm dia by means of bolts, nuts, check nuts, and washers of galvanised iron or steel including 15 mmdia medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in elkectrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. |
| 133 | Supply, design and installation & commissioning of rooftop solar power generating on grid rooftop solar power plant 30 KW On Grid complete system combo pack of Solar Module : Poly crystalline Module with string/central Inverter suitable for 30 KW including, BOS: Panel mounting GI structure, civil work, ACDB, DCDB, DC cables as suitable rating/core and including necessary functional accessories & earthing complete set and including all connected miscellaneous works, Testing complete new NMRE solar norms complete all as specified and directed. |
| 134 | M&L for point wiring with 1.5Sqmmcopper conductor (Multi-stranded) PVC insulated and unsheating FRLS electric cable 1100 volts cable and includingconcealed in PVC conduit 20 mm dia ISI marked orsuitable size(as per conductor run) with all fittings/ accessories and including PVCinsulated electric cable1100 volts 1.5 Sqmm ( multi-stranded)copperconductor single core( Green colour)cable as continuous earth wire connected to common earth dollyby providing lugs including sunk in pressed steel terminal boxes of 1.6 mm thick concealed in wall (duly painted with two coats of black bituminous paint over a coat of red oxide primer in and out sides) with and including cutting holes for switches, sockets, regulators etc as per requirement including fixing with machine screw, washer etc for one light point/bell point etc controlled by one, one way switch complete and making good the disturbed surfaces with cement work/putty as per existing including colour/white wash/distemper to match with existing same all as specified and as directed by the Engineer-in-Charge. |
| 135 | (a) One light point controlled by one, one way switch |
| 136 | (b) One fan/exhaust fan point controlled by one, one way switch |
| 137 | (c) One 5 Amp socket point controlled by one way switch on sameboard. |
| 138 | All as per serial item No 134 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded)PVC insulated and unsheating electric cable 1100 volts(ISI Marked) including PVC insulated and unsheathedelectric cable 1100 volts 2.5 Sqmm copper stranded conductor ascontinuous earthwire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge. |
| 139 | S&F modular socket outlet 6A 2/3 pin combined 2 modulecompleteall as specified and directed. |
| 140 | S&F modular switch 16A single pole one waycomplete all as specified and directed. |
| 141 | S&F modular socket outlet 6A/16A- 2/3 pin combined 2 modulecomplete all as specified and directed. |
| 142 | S&Fmodular switch single pole 1 way 6A,completeall as specified and directed. |
| 143 | M&L for modular Bell push Switch single pole one way6A/10Amps complete all as specified and directed. |
| 144 | M&L for call bellAC 230 volt single polecompleteall as specified and directed. |
| 145 | M&L for modular fanregulator, 120, W-2 modulecompleteall as specified and directed. |
| 146 | Supply and fixCeiling rose 3 termianlcomplete all as specified and directed |
| 147 | S&F modular white cover plate with frame for module 3 incl modular metal flush box complete all as specified and as directed |
| 148 | All as per Item no 144 above but for 6 module complete all as specifed and as directed |
| 149 | All as per Item no 144 above but for 8module complete all as specifed and as directed |
| 150 | Supply and fixing for sub main wiring two single core PVC insulatedand unsheathed cable with 6 Sqmm multi -strand copper conductor drawing in PVC casing capingwith 6 Sqmm PVC copper conductor cable as in earth wire system ,including taking out old wiringcomplete all as directed. Note : two run 6sqmm and one run of earth wire 6sqmm and PVC conduit will be measured as one length. |
| 151 | Supply and fix Sheet metal enclosure for AD/DD DB’ssuitable for MCBs of single pole and neutral 8 way (Double door) with 200 amp rated bus bar all as specified and directed. |
| 152 | S&F Isolator RCBO (Residual current breaker with over current protection) 40A, 240 volts all as specified and directed by Engr-in-Charge. |
| 153 | S&F MCB SP up to 40 Amp, 240 volt all as directed. |
| 154 | Material and labour for PVC rectangularblock of size 25 cmx20cmx5cm depth, closed recessed 3mm thick plastic laminated sheet complete all as specified |
| 155 | S & F Energy efficient LED integrated batten suitable for indoor applications tube light fitting 1x20 Watt 4 FT complete, all as specified and directed. |
| 156 | S&F LED Bulk Head fitting 9 Watt complete all as specified and directed by the Engineer-in-charge. |
| 157 | Supply and fix LED Lamp pin type 9 watt all as specified and directed by the Engineer-In-charge. |
| 158 | Material and labour for Lamp holder, PVC / Polycarbonatetype with back plate suitable for batten fittings including connections complete all as specified and directed. |
| 159 | S & F LED light fitting 1 x 10 Watt T5 Alumniumbatten type, indoor decorative PC housing extruded T5 Al LED battens with extruded aluminium housing and integrated LED driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable sizeincl taking down the old USNV completeall as specified and directed |
| 160 | Supply and fixingsecurity light fitting LED type 25 Wattnew generation in aluminium PDC housing, toughened glasscover with IP 66 protection complete in all respectwith GI tubing 25mm/40mm dia, mounting bracket with its clamp incl two coats of synthetic enamel paint over a coat red oxide primer and with all accessories, incl connecting of with 2 run of flexible aluminium/copper conductor of size 1.5 sq mm cable from fitting to junction box/conductor to street light as suitable on site, testing & commissioning complete all as specified and directed. |
| 161 | Supply and fixing Ceiling Fan 1200 mm, sweep star ratedwith blade, star rating BEE down rod complete all as specified and directed. |
| 162 | Supply and fixing exhaust fan300 mm sweep, 1400 RPMwith louver ,complete all as specified and directed. |
| 163 | Supply and fixing for 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN1.6) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings of size 25 mm fixed complete to walls, ceilings or in floors etc.,complete all as specified and directed. |
| 164 | Supply and fix PP-R Gate valves of size 25 MM outer dia (brass insert) as per requirement of the site complete all as specified and directed |
| 165 | Taking down and re-fixing, connecting existing electric meters, single phaseall as specified and directed by Engr-in-Charge |
| 166 | S&F Electric water heater storage type(Geysers) of capacity 25 ltrsmin. 3 star rating complete with fitting and fixtures five star rating metal body,complete all as specified and directed. |
| 167 | Supply and fixing along wall GI pipe 15 MM medium grade with all fittings such as socketts, nipplle, unions, elbows, reducers, tee pieces etc fixed along the wall with hooks etc what ever is required at site or all as specified and directed by Eng- in- Charge |
| 168 | Supply and fix angle Valve, stop, screwed,15 mm (1/2”) dia pipe but fancy type,chromium plated ,complete all as specified and directed. |
| 169 | M & Lfor cutting of exestingpipe size 20mm bore for insertion of Tee, union socket and nipples for taking branch connection of 15 mm bore including threading all as required at site,complete all as specified and directed. |
| 170 | S& F Bib taps,cast copper alloy with crutch or butterfly handle,screwed down,screwed for iron pipe or for brass ferrural and fixed fancy type. |
| 171 | S& F CP connection for Geysers complete all as specified and as directed. |
| 172 | Supply and fix single pole and neutral enclosure with a two pin and earth plug and socket of capacity complete with one single pole MCB of capacity 240 volts 20 amp complete all as specified and directed by Engr-in-charge. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
