|
| 1 | Taking down chowkats or frames with shutter (without taking off shutter from the frame) n. exc 1.5 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.5 sqm & n. exc 4 sqm each includingcutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed. |
| 3 | Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubing down with water etc and removing unserviceable material outside defence land complete all as specified and directed. |
| 4 | Dismantling floor, hearth or wall tiling/ terrazzo dado from wall surface including cement mortar bedding, (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specied and directed. |
| 5 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. and brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed |
| 6 | Demolition of plain cement concrete of any description and in any position not otherwise specifically provided and including removing from site to a distance n exc 500 mtrs , complete all as specified and as directed. |
| 7 | Demolition of brick work or stone/boulder masonry , built in cement mortar or cement lime mortar including all quoins, arches & pillars etc of any description and in any position and removingunserviceable material from work site to outside defence premises complete all as specified and directed |
| 8 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided and including removing from site to a distance n exc 500 mtrs , complete all as specified and as directed. |
| 9 | M&L for 25 mm thick plain cement concrete 1:2:4,type B-0, (using 12.5 mm graded crushed stone aggregate) as in sub base/ levelling course of floors, finished even and fair complete all as specified and directed. |
| 10 | M&L for 7 to 8mm thick non skid colouredceramictiles (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding0.18 sqm, in floors etc, set and jointed in neat cement slurry and poined in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed in cement motar 1:6 complete all as specified and directed. |
| 11 | M&L for 8 to 9 mm thickvitrifiedceramic (double charged), edge cut,joint free,coloured or printed, any shade tiles (square/ rectangular) polished,area of each tiles not exceeding 0.36 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles using spacers & gapfilled with silicon sealant over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 12 | M&L for 8 to 9 mm thickvitrifiedceramic double charged, edge cut,joint free,coloured or printed any shade tiles (square/ rectangular) polished,area of each tilesnot exceeding 0.36 sqm , as in vertical surfaces such as skirting / dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles using spacers & gap filled with silicon sealant over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 13 | M&L for glazed ceramic colouredtiles,300x600x7 mm thick, as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or colored cement to match the colour of tile over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 14 | M&L for 18 to 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing at edges complete all as specified anddirected. |
| 15 | M&L for anti termite treatment by treating the top surface of filled earth and plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed . |
| 16 | S&F Machine cut kota stone slab in flooring 18-20mm thicklaid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing,cutting and mirror polishing over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6complete all as specified and directed. |
| 17 | S&F Machine cut kota stone slab in vertical surfaces such as skirting,dado,risers etc 18-20mm thicklaid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing,cutting and mirror polishing over & including10 mm thick rendering in cement mortar 1:4complete all as specified and directed. |
| 18 | M&L for 75mm thick Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base, finishing surfaces even and fair complete all as specified and directed. |
| 19 | M&L for 18 mm thick non skiddura stone coloured digital ceramic,matt finish tiles (heavy duty) parking tiles,(square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding0.36 sqm, in floors etc, set and jointed in neat cement slurry and poined in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed in cement motar 1:6 complete all as specified and directed.. |
| 20 | M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete as directed, edge joint filling withcement mortar 1:4complete including necessary excavation complete all as specified and directed |
| 21 | M&L for plain cement concrete 1:2:4 ,type B1(using 20mm graded crushed stone aggregates) as in lintels upto 1.5m clear span, window or door cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings,side posts of precast jallies etc. including slightly rounded or chamfered angles including necessary formwork complete all as specified and directed. |
| 22 | M&L for 75mm thick PCC 1:3:6 , type C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection, laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. surfaces finished even and fairincluding raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed . |
| 23 | M&L for reinforced cement concrete 1:2:4,type B-1 (using 20mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconiescomplete all as specified and directed. |
| 24 | M&L for reinforced cement concrete 1:2:4,type B-1 (using 20mm graded crushed stone aggregates) as inbeams,lintel chajjas,door pillars and like complete all as specified and directed. |
| 25 | M&L for use and waste of form work to softfits of suspended slabs such as roof slabs , floor slabs , landings and similar work, not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces of concrete complete all as specified and directed. |
| 26 | M&L for use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified anddirected |
| 27 | M&L for use and wasteof formwork to edges of concrete flats, treads, breaks in floors,window cills,concrete railings, openings in concrete walls, floor and roofs, n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n. exc 20cm wide forrough finished surface complete all as specified and directed . |
| 28 | M&L for mildsteel TMTbars 6mm to 10mm dia and over, cutto length, bent to shape required, including cranking, bendingspirallyforhooping forcolumn, hookingendandbinding withandincludingmildsteelwire(annealed) not lessthan0.9 mm dia orsecuring with clips, complete all as specifiedand directed . |
| 29 | M&L for brick work with fly ash bricks using old size bricks, straight or curved onplan exceeding exc 6 metre mean radius, built in cement mortar 1:6 complete all as specified anddirected . |
| 30 | M&L for brick work with fly ash bricks using old size bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed . |
| 31 | M&L for rendering 15mm thick in cement mortar 1:6 on brick work or concrete surfaces, surface finished even and smooth without using extra cement complete all s specified and directed. |
| 32 | M&L for rendering 15mm thick in cement mortar 1:4 on brick work or concrete surface,surface finished even and smooth without using extra cement complete all as specified and directed. |
| 33 | M&L for rendering 05 mm thick in cement mortar 1:3 on ceiling, surface finished even and smooth without using extra cement complete all as specified and directed. |
| 34 | M&L for capillary rise treatment of walls with following specification:-Base coat: Berger HS Latex plus or equivalent in make specified in PSConsumption base coat: 0.3 kg/m2Second and Third coat: Latex sheild 2K or equivalent in make specified in PSConsumption top coat: 3 kg/m2System requirements: density: 2.00 kg/ltrcompressive strength: 0.5 N/mm2. |
| 35 | Complete removal of existing water proofing treatment of any description including under layer, taking downcement plaster any thickness,concrete,mud phuska etc and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove all loose dirt/dustand removal of debris off the premisesincluding grubbing up of trees complete all as specified and directed. |
| 36 | M&L for cleaning of the exposed concrete slab & like and repairing the surface irregularities like cracks, potholes with HS Latex Plus(or equivalent) & cement in mixing ratio of 1:4 as per manufacturers method statement by Berger HS Rapairo (or equivalent) i complete all as specified and directed . |
| 37 | M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) as in padding over roof finished & laid to required slope, mud stops,roof kerbscomplete all as specified anddirected . |
| 38 | M&L for HomeSheild PU Roofkoat(or equivalent) is a one component liquid ,solvent free , cold applied , water-proofing membrane that is highly elastic and UV resistant with 10 years warranty .ASTM D 6083-97 a Waterproofing and heat reflecting system having following key performance properties:-a) UV resistant ,prevent yellowing and weatheringb)Highly elastic upto 350% and crack bridgingc) Excellent adhesion on porous and non-porous substratesd) Tensile Strength >10 N/mm2 with GeoTextile fleecee) Soler Reflective Index (SRI) more then 109-111ASTM E1980-11System: First coat:Providing and applying primer over the prepared surface with HS PU roofkoatPrimer(or equivalent)Coverage: 0.2kg/sqm(with 50% dilution of water)Reinforcement: Geotextile 40 gsmSecond coat:Home sheildroofkoat(or equivalent)Consumption: 0.5 kg/sqm.Third coat: HS PU roofkoat(or equivalent)Consumption : 0.8 kg/sqm.System buildup-1.5kg/sqm with geotextile of 40gsm |
| 39 | M&L for glass fibre reinforced modified cementitious coating system before the final coat of Latex Shield 2K (or equivalent).Base coat: Berger HS Latex plus (or equivalent) both on wall (upto 1 mtr min height) and floor.Consumption base coat: 0.3 kg/sqmReinforcement: Glass fiberSecond and Third coat: Latex sheild 2K (or equivalent) both on wall (upto 1 mtr min height) and floor.Consumption top coat: 3 kg/sqmSystem requirements: density: 2.00 kg/ltrcompressive strength: 0.5 N/mm².• Wall penetration through the RCC slab must be sealed using Berger HS RepirO(or equivalent).• Intersection of base slab with wall must be provided with a 50 mm fillet using Berger HS Latex plus(or equivalent) modified mortar with a bonding coat of Berger HS Latexplus(or equivalent) modified cement slurry upto 5ft.• All depressions, unevenness, surface honeycombing shall be repaired using Berger HS Latex plus (or equivalent) modified polymer mortar with a bonding coat of Berger HS latex plus(or equivalent)modified cement slurry including cleaning ofRCCsurface to remove dust, loose particles, etc with compressed air or any other suitable technique depending on site conditions, grinding any sharp edges, etc and applying an avg 75 mmthick PCC 1:1.5:3 (nominal mix) (using12.5mmgraded crushed stoneaggregate) mixed with water proofing compound with proper slope shall be laid to a slope of 1:40towards spout on RCC slabcomplete all as specified and directed . |
| 40 | M&L for 10mm thick renderingin cement mortar 1:3 on concrete surfaces as inroof,finished even & fair and including mixing of water proofing compound complete all as specified anddirected . Note:-WPC shall be measured and paid separately |
| 41 | Supply only liquid water proofing compound. |
| 42 | S&F 32 mm dia High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in as spoutto pour out residual water out from the treated areacomplete all as specified and directed . |
| 43 | M&L for hard core of gaugenot exceeding 63mmusing broken bricks,deposited, spread and leveled in layers not exc 15cm thick, watered and rolled/rammed to a true surfaces complete all as specified and directed . |
| 44 | S&F aluminium alloypowder coated aluminium door frame fixed with side hung shutters and glazing or composite panel LDPE core PET coating ( both side decorative type ) fixed with and including 5.50mm thick black film glass fixed with rubber gasket with aluminium heading, clips, frame made with aluminium box section as appended below complete all as specified and directed :-(a) Frame 100x44x1.48mm thick with rawl plug(b) Middle and lock rail : 150x44x1.48mm thick(c) Bottom rail : 150x44x1.48mm thick(d) Top rail/style : 85x44x1.48mm thick(e) Aluminium beading : 0.7mm thick(g) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long, brass mortise lock 100mm 4 leaver, aluminium stopper 100 mm long, Including Heavy duty hydraulic door stopper.(h) 04X stainless steel Hinges 100mm long (02x top,01x centre and 01x bottom) on each shutter (j) Making good the wall surface to match with existing finishes complete. |
| 45 | S&F aluminium alloypowder coated aluminium door frame fixed with inside glazing and outside stainless steel wire mesh ,side hung shutters fixed with rubber gasket and aluminium beading, clips, frame made with aluminium box section as appended below complete all as specified and directed :-(a) Frame 100x44x1.48mm thick with rawl plug(b) Middle and lock rail : 150x44x1.48mm thick(c) Bottom rail : 150x44x1.48mm thick(d) Top rail/style : 85x44x1.48mm thick(e) Aluminium beading : 0.7mm thick(f) Plain glass 5.5mm thick with black film(g) Stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.40 mm and fixed with stainless steel wire staples(h) 04X stainless steel Hinges 100mm long (02x top,01x centre and 01x bottom) on each shutter (j) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long, brass mortise lock 100mm 4 leaver ,aluminium stopper 100mm long, Including Heavy duty Hydroulic door stopper.(k) Making good the wall surface to match with existing finishes complete. |
| 46 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 75 x 50 mm comprising of virgin PVC polymer of K value 58-60 (suspension Grade), calcium carbonate and natural fibersand non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum and screw withdrawal strength of 2200 N (Face)and 1100N (edge), minimum compressive strength 58 N/ mm ² ,modules of elasticity 900 N/mm ² and resistance of spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed.Note:- Variation in profile size of frame ±5mm is allowed and contractor\"s quoted rate is deemed to include the same |
| 47 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush shutter of 30mm size comprising of virgin polymer of K value 58-60 (suspension Grade),calcium carbonate and natural fibres (wood powder/rich husk/wheat husk) and non toxic additives (maximum toxicity index of 12 to 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face)and 900N (edge), minimum compressive strength 50 N/ mm ² ,modules of elasticity 850 N/mm ² and resistance of spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges (02 Nos in each shutter) of required size with necessary full body threaded star headed counter sunkS.S scrwes complete all as specified and directed. . Note:- Variation in profile size of shutter ±5mm is allowed and contractor\"s quoted rate is deemed to include the same |
| 48 | S&F Powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on threetracks with 01x stainless steel mosquito proofing shutter and 02x glazing shutter and including 5.50 mm thick glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below-(i) Window frame :95x35mm X 1.48 mm thick for three tracks.(ii) Top/bottom rail and style / rail of shutter : 19x38x1.48mm thick and over.(iii) Aluminium beading - 0.7mm thick(iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete.(v) Aluminium fittings suchaluminium handle with auto interlocking closing(vi) Making good the wall surfaces to match with existing surfaces complete |
| 49 | S&F aluminium ventilator of section size 65x38mm, fixed type, including figured glass at bottom and stainless steel wire mesh cloth at top complete all as specified and directed . |
| 50 | S&F partition wall and fixed ventilator of powder coated aluminium hollow section members of size 63.50 mm x 38 mm x 1.48 mm thick with distance of vertical hollow section, 1.2m to 1.8m height of wall having top rails, bottom rails and middle rail of size 63.50 mm x 38mm x 1.48mm and upto middle rail wall panels shall be covered with 5 mm thick aluminium composite panel LDPE core PET coating (both side decorative type) with aluminium clip height of middle rail shall be 1 meter from floor and remaining portion above middle rail shall be provided with 5 mm thick glass including eaching approved design with aluminium striprs/beadings with rubber gasket as per site requirement complete all as specified and directed. |
| 51 | M&L powder coated aluminium window/ door grills to be fixed along with frame of following specification:- Grills with opening 69.4 mm x 78.2 mm and thicknessof 6.4 mm x 5.8 mm having weight not less than 2.306 Kg/ sqm, shape as ordered with frame channel of 34 x 11mm x 1.7mm thick fixed with screw inside of the window complete all as specified and directed. |
| 52 | S&F 100mm long mild steel butt hinges, medium weight ,coldrolled, fixedwith screws complete all as specified and directed |
| 53 | S&F aluminium anodised barrel tower bolts, 150mm long of extruded section, fixed to doors with screws complete all as specified and directed. |
| 54 | S&F aluminium anodised ,cast type handle 125mm size complete all as spcified and directed. |
| 55 | S&F in replacement Rotational moulded polyethlene water storage tanks of 1000 litres capacity (cylindrical vertical with closed top) with plastic lid cover, hoisted and fixedin positionincluding making connections complete all as specified and directed. |
| 56 | S&F in repairBall brass valves,high pressure,with polythene float and flynut complete, screwed for iron pipe or brass ferrule of bore 20mmcomplete all as specified and directed. |
| 57 | Taking up or down 15mm dia GI tubing and conncetions including cleaning for refixing or removal to store complete all as specified and directed |
| 58 | Taking up or down 20 mm dia GI tubing and conncetions including cleaning for refixing or removal to store complete all as specified and directed |
| 59 | S&F Galvanised steel tubing, 15mm bore, medium grade with all fittings, fixed to wall with clamps /ceiling or laid in floors complete all as specified and directed |
| 60 | S&F Galvanised steel tubing, 20mm bore, medium grade with all fittings, fixed to wall with clamps /ceiling or laid in floors complete all as specified and directed |
| 61 | S&F vitreous china counter top wash basin, size 560x400x250mm, oval shape , white, to be fixed on counter/ RCC slabincludingbottle trap, 32mm waste pipecomplete all as specified & directed |
| 62 | S&F in repairCP brass wall mixer 3-in-1 system with provision of overhead & hand shower complete with 150mm long flexible tube and crutch (quarter turn) pipe, for hot and coldwater, screwed down for iron of bore15mmcompleteall as specified and directed. |
| 63 | S&FCP brasswash basin mixer, long body, swan neck typefor mixing hot & cold water ,screwed down for iron pipe of bore 15mm including necessary fittings complete all as specified and directed . |
| 64 | S&F in repair brass chromium plated shower rose of square size 150 mmwith 450mm long arm and with or without swivel joints to steel pipe or union complete all as specified and as directed. |
| 65 | S&F in repair bib tap with flange, quarter turn, long body, chromium plated, fancy type, cast copper alloy,screwed down, screwed for 15 mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 66 | S&F in repair two way bib cock with flange,cast copper alloy , fancy type, chromium plated, screwed down for high pressure with crutch or butterfly handle, screwed both ends for iron pipe of 15mm bore complete all as specified and directed. |
| 67 | S&F in repairstainless steel tubular towel ring ,rectangular of size 20cmx12.5cm, fixed with CP brass screws and bracketsincluding plastic beads complete all as specified and directed. |
| 68 | S&Fin repair PVC connection 15 mm x 450 mm including PVC check nut at both ends complete all as specified and direced. |
| 69 | S&F in repair Chromium plated soap dish of size 160x160x90mm, any type, fixed to plugs with chromium plated brass screwscomplete all as specified and directed. |
| 70 | S&F in repair angle valve,cast copper alloy,fancy type, chromium plated, screwed down for high pressure , screwed both ends for iron pipe of 15mm bore complete all as specified and dircted. |
| 71 | S&F in repair sheet glass shelf assembly consisiting of 5.5 mm thick sheet glass, shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 72 | S&F in repair Gun-metal, 20 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engineer in Charge. |
| 73 | S&F in repair vitreous china wash down water closet pan (pedestal pattern) of size 520x360x390mm white in colour including connection pipe to union of flushing cistern, inlet and overflow pipes, connecting only to flushing cistern, anti-syphonage pipe with PVC flush pipe of 32mm dia including plastic seat with cover, white in colour with mild steel chromium plated hinging and \"P\" or \"S\" trap device complete all as specified and directed |
| 74 | S&F in repair 10 litres PVC, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float 32mm PVC \"L\" bend and handle including brackets complete all as specified and directed |
| 75 | S&F in repair chromium plated toilet paper holderfixed to walls with chromium platedbrass screwscomplete all as specified and directed. |
| 76 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 8mm dia pipe with 1.00 metre long flexible tube and ABS wall hook including making connectios and fixed in position complete all as specified and directed. |
| 77 | S&F in repair PVC (SWR) type-B multi floor trap plain with stainless steel grating having diameter of outlet 75 mm including jointing with solvent cement to waste pipe, laid in cement concrete 1:2:4 type B-1 complete all as specified and directed. |
| 78 | S&F in repair PVC (SWR) floor trap plain with stainless steel grating having diameter of outlet 75 mm including jointing with solvent cement to waste pipe, laid in cement concrete 1:2:4 type B-1 complete all as specified and directed. |
| 79 | S&F UPVC (SWR) type B pipes, 110 mm bore, single socketed, in any length with rubber ring joints,laid in trenches or in floors or fixed to walls with nail at spacing of 1.5m center to center including stack clamp of GI flat 30mm wide 2mm thick complete all as specified and directed.. |
| 80 | S&F UPVC (SWR) type B pipes, 75 mm bore, single socketed, in any length with rubber ring joints,laid in trenches or in floors or fixed to walls with nail at spacing of 1.5m center to center including stack clamp of GI flat 30mm wide 2mm thick complete all as specified and directed.. |
| 81 | S&F UPVC (SWR) bends with access door, any radius, 75 mm bore complete all as specified and directed |
| 82 | S&F UPVC (SWR) bendswith access door, any radius, 110 mm bore complete all as specified and directed |
| 83 | S&F UPVC (SWR), junction single, (single \"T\")equal or unequal for 75 mm bore complete all as specified and directed |
| 84 | S&F UPVC (SWR), junction single, (single \"T\")equal or unequal for 110 mm bore complete all as specified and directed |
| 85 | S&Fdesigned looking mirror ofsize exc 0.54 sqmbut n. exc 0.75 sqm of selected quality 6mm thick glass, fixed to wall with chromium platedplugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 86 | S&FPTMT cabinet with mirror of selected glass of size 350x450mm, fixed with screw complete all as specified & directed |
| 87 | S&F in repair chromium platedstainless steel towel hangerwith 06 hooks fixed to wallcomplete all as specified and directed. |
| 88 | S&F roller blinds using febric in zebra pattern with control unit made of high strength reinforced plastic,clutch with wrap spring design,operated by endless beaded chain including idler mounted on bracket by plastic by plastic lock centre shaft and aluminium extruded rail poweder coated including braces anodised tube to high strength alloy roller tube,bottom rail (aluminium extruded tube and 4.5mm thick plaster beads on 2.2mm thick polyester chord operating chain,colour and pattern selected by GE complete all as specified anddirected .. |
| 89 | S&F rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries rails and fastening and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc confirmimg to Fe 290 (Gde E -165)complete all as specified and directed . |
| 90 | S&F Fibre glass reinforcedtranslucent corrugatedsheeting 2 mm thick with twocorrugations side lap,fixedwith L-type or J-type or cranked hook bolts in roof, wall etc complete all as specified and directed . |
| 91 | S&F Pre painted galvalume aluminium zinc coating (AZ-150 micron) GI basedcorrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed . |
| 92 | S&F Pre painted galvalume aluminium zinc coating (AZ-150 micron) GI basedplain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed . |
| 93 | S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed |
| 94 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting exc 10cm but not exc 40 cm girth in brick walls and RCC chajjas complete all as specified and directed . |
| 95 | S&F in repair PVC hollow interlocking wall panelling of 5mm thick prelam PVC sheet. The panel & strips shall be of 600 Kg/ cbm density, manufactured by an ISO-9000 certified company. The strips should two PVC strips. The PVC strips shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fasterners. The distance between two screws shall not be more than 200mm. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement complete all as specified and directed. |
| 96 | M&L forproviding and fixing stainless steel (Grade-304) railing made of hollow tubes, channels, plates etc including welding,grinding,buffing,polishing and making curvature(wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners,stainless steel bolts,decorative elements etc, of required size including making groove /drillwith suitable fixing arrangement in RCC floor/staircase/brick wall complete all as specified and directed |
| 97 | M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 98 | M&L for complete removal of existing treatment of wall/ceiling , roof projection, including facia, cornices, etc by scrapping with mechanical wall sander (having mechanical vaccum mechanical) having RPM not less than 1500, sanding pad of 60 grit having dia of 7\"/9\" to make the surface free from dust, loose paint etc by skilled labour (up to 4th storey with necessary scaffolding) complete all as specified and directed |
| 99 | M&L for water proof cement based putty @ 1kg (undiluted) per sqm of average thickness 1 mm over the plastered painted exterior wall surfaces of walls (upto 4th storey with necessary scaffolding )including prepartion of surfaces by scarpping to prepare the surface and sanding of the putty surfaces with mechanical wall sander (having mechanical vaccum mechanism ) having RPM not less than 1500 ,sanding pads of 240 Grit or above to make the surface free from dust etc by skilled llabour as per following steps:-Steps 1:- Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of minimum 2.5 kg putty per minute.Step 2:- Apply the first coat of prepared mixer with the manually required help of fully automatic airless spary machine of putty application, finishing the surface even and smooth in level without any undulation.Step 3:- Allow 6 to 8 hour time to dry the putty surface, Apply the further more coat of preparaed mixer with the help of fully automatic airless spary machine of putty application, finishing the surface even and smooth in level without any undulation. Note:- Workshall be carried out by the authorised applicator of manufacturer and shall be approved by the GE before commecement of work at site. |
| 100 | M&Lfor one coat of acrylic water based interior/exterior grade primer @ 0.8 ltrs (undiluted) per 10 sqm, diluted with water in 1.1 ratio to be applied with fully automatic airless spary machine of paint application with a flow speed of min 1 litres per mintues having a pressure of 3300 PSI and Allow 6 to 8 hours to dry surface for painting of subbsequent coats (walls up to 4th storey with necessary scaffolding)complete all as specified and directed .Note:- Workshall be carried out by the authorised applicator of manufacturer and shall be approved by the GE before commecement of work at site. |
| 101 | M&L for Preparing the primer surface and applying two coats of oil bound distemper on wall/ceilling (up to 4th storey with necessary scaffolding) using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed . Note:- Workshall be carried out by the authorised applicator of manufacturer and shall be approved by the GE before commecement of work at site. |
| 102 | M&L for water based premium acrylic smooth exterior emulsion for approved colour (up to 4th storey with necessary scaffolding) with silicon additive excellent dirt pickup resistance with low VOC less than 50 AntifugalAnti Algai properties in two coat @1.79 litre (unndiluted) /10 sq mtrs diluted with water as per manufacturer instructions applied over priming surface with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in between subsequent coats of paintcomplete all as specified and directeNote:- Workshall be carried out by the authorised applicator of manufacturer and shall be approved by the GE before commecement of work at site. |
| 103 | Taking down carefully existing aluminium/copper point wiringfor light, fan, socket or power bell complete with fittings such as Switches, sockets, ceiling roses, holders, call bells etc & making goodthe disturbed surfaces of walls/ceiling, matching the colour with existing surface complete all as specified and directed.Note : Rate for making good shall be deemed to be included in above item rate. |
| 104 | Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable(ISI marked) 1100 volts grade FRLSH with multistranded copper conductor, drawn through concealed / surface in wall / roof/ceiling surface and its accessories on the surface etc including PVC rigid concealed medium grade conduit of suitable size with all accessories such as bend, reducers, MS hooks including modular galvanisedflush boxes of suitable size and white cover plate with frame as per relevant ISfor mounting modular switches, sockets, fan regulators etc including continuous earth wire of size 1.5 Sqmm PVC FRLSH stranded copper conductor unsheathed, insulated, strandedconnected to common earthpoint dolly for one light point/fan point/call bell point, 230 voltscontrolled by one switch complete all as specified and directed . Note:- Proper colour coding is to be followed as per IS specifications. |
| 105 | All as per srl item No 104 above but One 3 pin socket outlet 6 amp independentcomplete all as specified and directed |
| 106 | All as per srl item No 104 above but One 3 pin socket outlet 6 amp same board complete all as specified and directed |
| 107 | All as per srl item No 104 above but for one 3 pin socket outlet 16 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire complete all as specified and directed. |
| 108 | S&F modular type switch, one way 6 Amps , 1 module complete all as specifieds and directed . |
| 109 | S&Fmodular type socket 3 pin, 6 Amps, 2 module complete all as specifieds and directed |
| 110 | S&F modular type switch, one way, 16 Amps, 1 module complete all as specifieds and directed . |
| 111 | S&Fmodular type socket 3 pin, 6 A/16 Amps,2 module complete all as specifieds and directed . |
| 112 | S&Fmodular bell push6 Amp , 1 module complete all as specifieds and directed. |
| 113 | S&F bell ding dong AC 230 volts single phase complete all as specifieds and directed . |
| 114 | S&F energy saving new generation 10W LED bulk head luminaire with opal diffuser, IP 65 and including connecting up with twin core twisted flexible copper coductor cable with suitable size of 230 volt,50 Hz complete all as specified and directed. |
| 115 | S&Fexhaust fan, steel body, AC single phase. 230 V of size 300 mm sweep with, blades and frame and louvers, hanging on wall with 4 Nos steel fasterners 10mm dia & 100mm long includingwall hole and making good the disturbed surfaces as per existingcomplete allas specified & directed |
| 116 | S&F ceiling rose, surface backelite, two/ three terminal, 240 volts complete all as specifieds and directed . |
| 117 | S&F lamp holder,PVC /Polycarbonate type with back plate suitable for batten fittings complete all as specifieds and directed .. |
| 118 | S&F LED lightfitting 1 x 20Watt, 220V,decorative box type with driver, holder including LED tube light, connecting up with three core flexible copper conductor cable of suitable size from ceiling rosewith all fixing arrengenmentcomplete all as specifieds and directed . |
| 119 | S&F MCB SPN,40-63Amp, 240 Volts withrupturing capacity 10 KA, \"C\" series, complete all as specifieds and directed . |
| 120 | S&F MCB Single pole, 6 to 32 Amp, 240 Volts withrupturing capacity 10 KA, \"C\" series, complete all as specifieds and directed . |
| 121 | S&FSubmain wiring with two runs of single core PVC FRLSH unsheathed, insulated, copper cable of 4 Sqmm size, multi stranded, 1100 volts grade with PVC insulated,unsheathedFRLSH copper wire 4 Sqmm for continous earth wire drawn into and includingconcealed PVC conduit of suitable sizecomplete all as specifiedand directed . Note :- Two runs of 4 Sqmm copper cable and one run of 4 sqmm copper wire earth continuty conductor in conduit with accessories shall be measured as one length) |
| 122 | S&FSheet metal enclosure for DBs,SPN, double door,IP-54 protected, 240 Volts,12 ways with 200 amps rated copper bus bar complete all as specified and directed |
| 123 | S&FSheet metal enclosure for DBs,SPN, double door,IP-54 protected, 240 Volts,08 ways with 200 amps rated copper bus bar complete all as specified and directed |
| 124 | M&L for complete earthingwith galvanised mild steel earth plate electrode of size600x600x6mm thick, burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B-1, precast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh ,15mm dialight grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specifieds and directed .. |
