|
| 1 | Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 Sq m on plan and not exceeding 1.5 m in depth and getting out in hard / dense soil completeall as specified and directed. |
| 2 | Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed. |
| 3 | Returning, filling in including spreading, levelling, watering and well ramming using excavated soil in layers not exceeding 25cm thick complete all as specified and directed |
| 4 | Plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concreting, complete all as specified and directed. |
| 5 | Reinforced cement concrete (nominal mix) Type B1, 1:2:4 using 20 mm graded stone aggregate as in foundations, including rafts, footing, foundations, beams, plinth beams, bases for columns, etc., basement slabs, under reamed piles and mass concrete etc complete all as specified and directed. |
| 6 | Use and waste of formwork to sides of concrete foundations, footings, base of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work; vertical or to batter flat surface rough finished complete all as specified and directed. |
| 7 | Reinforced cement concrete (nominal mix) Type B1, 1:2:4, using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts all as specified and directed. |
| 8 | Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions with rough finished surface of concrete complete all as specified and directed. |
| 9 | Reinforced cement concrete (nominal mix) Type B1 1:2:4 (using 20mm graded stone aggregate) for beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed. |
| 10 | Use and waste of form work to edges of concrete flats, treads, breaks in floor, window cills, concrete railing, openings in concrete walls, floor and roof not exceeding 20cm wide and sides of RCC / PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide all as specified and directed. |
| 11 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape as required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed. |
| 12 | Mild steel TMT bars 5mm dia and over cut and upto and including 10mm dia stirrups, spacers and binders, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips all as specified and directed. |
| 13 | Steel work in tubular trusses including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 grade St-240 etc conforming to FE-290 gde-E-165 including painted one shop coat of zinc chrome primer paint (including preparation of suface) at contractor\"s workshop before fabrication complete all as specifed and directed. |
| 14 | Mild Steel base plate, bolts, purpose made, with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 30 cm long and not exceeding 12mm dia completed all as specifed and directed. |
| 15 | Preparation of new steel surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed. |
| 16 | Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified and directed. |
| 17 | Aluminium anodised snap grid frame work for false ceiling with 605mm x 605mm size, consisting of main tee of size 23.50mm x 36.50mm x 1.50mm, cross tee of size 23.50mm x 23.50mm x 1.50mm, and wall angle of size 36.00mm x 25.0mm x 1.50mm of approved make includiong all necessary cutting, fixing of aluminium section firmly in position with and including stewel hangers 6mm dia G.I wire (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40x3mm size 60mm long and expansion hold fasteners 40mm long in soffit of slab/ walls complete all as specified and directed. |
| 18 | Material and labour for 6mm thick calcium silicate board of siliceous and calceareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid fixed on metal frame work all as specified and directed.Note: Metal Frame work for ceiling shall be measured and paid separately. |
| 19 | Pre-cast cement concrete block masnory with solid block exceeding 10cm in width and setting in cement mortar 1:4 type C1 1:3:6 using 20mm graded stone aggregate complete all as specified and directed |
| 20 | Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work/ Stone or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 21 | Preparation of newly plastered wall surface and applying of wall care putty approx 3mm thick in two layer as per maufacturer\"s instruction on existing prepared surface and make the surface smooth by rubbing with sand papers and applying two coats of oil emulsion distemper over a coat of primer complete all as specified and directed. |
| 22 | External Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth mixed with water proofing compound complete all as specified and as directed.Note: WPC shall be measured and paid separately. |
| 23 | Supply only liquid water proofing compound all as specified and directed. |
| 24 | Preparation of newly plastered surface and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004,Alkali & Fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/10Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10Sqm over new surfaces complete all as specified and directed.Note: 1. Rates shall be quoted inclusive of required scafolding for a height upto 10 meters buildings. |
| 25 | Spreading levelling layer not exceeding 25cm with soil well ramming with watering filling under floors all as specified and directed. |
| 26 | Hardcore ofbroken stone or boulders of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered andrammed to a true surface using broken stone or boulders all as specified and directed. |
| 27 | Plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base to floor 100mm thick all as specified and directed. |
| 28 | Plain cement conncrete 1:2:4, type B-0using 12.50mm graded stone aggregates in floor 25mm thick finished even and smooth without using extra cement complete all as specified and directed. |
| 29 | Vitrified Ceramic tiles light shade 8-10mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 including demolition of existing tiled flooring all as specified and directed. |
| 30 | All as per item No 29 hereinbefore but on vertical surfaces including 10mm thick cement mortar 1:4 as in baking coat of dado/ skirting all as specified and directed. |
| 31 | 75mm thick plain Cement concrete , 1:3:6, type C-2 using 20 mm graded stone aggregate as in plinth protection all as specified and directed. |
| 32 | 2nd class hard wood wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue, pinned at joint all as specified and as directed. |
| 33 | 35 mm thick flush shutter, solid core construction, with blockBoard Core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 34 | Mild steel Bands, straps, supports or stays, sunshade brackets,hook and pintle hinges, clamps, hold fasts, guardbars, grills bolts, lader for roof approach etc and similar conforming to Fe-410-0 or 310-0 all as specified and as directed. |
| 35 | Extrudedaluminium alloy handles fabricated type 150 mm size, anodized complete all as specified and directed. |
| 36 | MS Butt hinges medium weight cold rolled 125mm long complete all as specified and directed. |
| 37 | 300 mm long aluminium alloy, anodized sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section complete all as specified and directed. |
| 38 | Aluminium anodized barrel tower bolt of extruded section 150 mm length complete all as specified and directed. |
| 39 | Floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel pin fixed to door, over all length 140 mm complete all as specified and directed. |
| 40 | Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and as directed. |
| 41 | Demolition of reinforced cement concrete to roofs, floors (other than ground floors) beams, staircases, landing, chajjas and smiliar suspended work all as specified and directed. |
| 42 | Factory made UPVC white colour sliding window three track with fly proof S.S wire mesh (Two nos glazed and one no wire mesh panels) upto 1.50m height made of (big series) frame116x45mm and sash 46x62mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket wool pile, zinc alloy (white powder coated touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40kg), G.I fasteners 100x8mm size for fixing frame to finished wall and necessary stinless steel screws etc. profile of frame & sash shall be mitred out and fusion welding at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specifed and directed.Note: I) Glass or wiremesh shall be measured and paid separatelyII) For UPVC frame sash and mullion extruded profiles minus 5% tolerance in dimension i.e in higher side shall be accepted but no extra payment on this account shall be made. |
| 43 | Plain sheet glass 4.8mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.50 sqm in each pane all as specified and directed. |
| 44 | Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless wire staples complete all as specified and directed. |
| 45 | Surface excavation not exceeding 30cm deep and averaging 20 cm deep and getting out as in any type of soil complete all as specified and directed. |
| 46 | Surface excavation not exceeding 30cm deep and averaging 30 cm deep and getting out as in any type of soil complete all as specified and directed. |
| 47 | Chequered cement concrete coloured tiles20 cm x 20 cm x 25 mm thick, with grey cement andpigments, set, jointed and pointed in neat cement slurry in floors, steps etcover and including 15 mm thickscreed bed in cement mortar 1:6complete all as specified and as directed. |
| 48 | Plain Cement Concrete 1:3:6 type C1 using 20mm graded stone aggregate as in coping, bed blocks and kerbs including necessary form work, weathering, slightly rounded or chamfered angle and throating complete all as specified and directed. |
| 49 | Material and labour for Point wiring complete with 1.5 sqmm (nominal area) FRLS gradePVC insulated, unsheathed stranded copper conductor single core cable 1100 volts grade in and including PVC conduit medium grade in concealed complete with conduit fittings/ accessories including 1.5 sqmmFRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan/fan point controlled by one switch 5Amps SP all as specified and directed.Note: 1. Sunken box/ Cover plate for modular plate for modulat switches, sockets etc will be measured and paid separately under relevant items and blank plate required if any will be deemed included in the item rate.2.Cutting chases in stone masonry wall will be measured and paid separately. |
| 50 | All as per Item No 49 hereinbefore but One 3 pin 5Aswitch socket outleton independent Board all as specified and directed. |
| 51 | All as per item No 60 hereinbefore but one 3pin socket outlet 5A on same board with other switches all as specified and directed. |
| 52 | All as per Item No 132 hereinbefore but point wiring complete with 2.5 sqmm for 3 pin 15 A socket outlet on independent board including 2.5 sqmmFRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed. |
| 53 | Material and labour for Modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module all as specified and directed. |
| 54 | Material and labour for Modular socket 6A /16A2/3 pin combined230V AC 50 HZ SP two module all as specified and directed. |
| 55 | Material and labour for Modular switch one way 6A 230V AC 50 HZ SP one module all as specified and directed. |
| 56 | Modular switch one way 16A 230V AC 50 HZ SP one module all as specified and directed. |
| 57 | Modular Metal Flush Box 3 module rectangular block for mounting, switches, sockets, fan regulator etc. all as specified and directed. |
| 58 | Modular Metal Flush Box 4 module rectangular block for mounting, switches, sockets, fan regulator etc. all as specified and directed. |
| 59 | Modular Metal Flush Box 6 module rectangular block for mounting, switches, sockets, fan regulator etc. all as specified and directed. |
| 60 | Modular White Cover Plate with Frame 3 module all as specified and directed. |
| 61 | Modular White Cover Plate with Frame 4 module all as specified and directed. |
| 62 | Modular White Cover Plate with Frame6 module all as specified and directed. |
| 63 | LED dimmable LED panel size 595mmx595mm, 40watt, 6000K, 100 Watts/ Luman, 220V AC surface mounted type with high efficiency PMMA diffuser soft glare free light coplete with drivers, holders & LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.Make: Luker Product code- LPSD40 or equivalent techno commercial make. |
