|
| 1 | Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings complete all as specified and as directed. |
| 2 | S&F in position Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 3 | All as per item No 02.00 here in before but plain sheet as in ridge/valley/gutter complete all as specified & as directed. |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. |
| 5 | S&F steel work in tubular column, purline, rafter etc using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240including one shop coat of zinc chromate primer (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and as directed. |
| 6 | S&F mild steel plate (plain or chequered), channels, square cut or notched (ordinary and counter sunk) forming holes with welded attachment to GI pipe in base/ connections etc. including one shop coat of zinc chromate primer (including preparation of surface) at Contractor’s workshop before fabrication Fe 410 -W (Gde-E- 250) quality-A complete all as specified and as directed. |
| 7 | M&L preparation of new steel surface over 10cm width/girth and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed. |
| 8 | Demolition of Brickwork or stone/boulder masonry, laid in CM for ashlars facings, dressed stonework, precast concrete articles and precast concrete block walling. |
| 9 | M&L for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 M mean radius, using old size bricks built in CM 1:6 all as specified and directed. |
| 10 | Taking down of chowkhat or frame (without taking off shutter from frame) area not exc 1.50 Sqm eachincluding builder hardware fitting complete all as specified and as directed. |
| 11 | All as per item No 10.00 here in Before but area exc 1.50 Sqm & not exc 4.00 Sqm each complete all as specified and as directed. |
| 12 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm one side prelaminated and other side plain colour PVC sheet & edges will be painted to match with prelaminated sheet reinforced with M.S. Squaretube, suppling & fixed with screw/plugs to brick walls complete as per specification & drawing. |
| 13 | S&F Factory madeSolid PVC Moulded Door Shutter 28 to 30mm thick (stiles),with 2, 4or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 14 | S&F 200 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 15 | S&F 200mm long Aluminum anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 16 | S&F 150mm long aluminum handles, cast type anodised complete all as specified and directed. |
| 17 | S&F 100 mm long butt hinges medium weight cold rolled mild steel complete all as specified and directed. |
| 18 | M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete complete all as specified and directed by Engr-in-Charge. |
| 19 | S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 20 | S&F Powder coated Anodised aluminium doors (sliding/hanging type) with frame size 101.60X44.45X 2.00 mm thick and shutter aluminium anodised and top rail 47.62X 44.45 X 1.50mm and style 47.5 x 44.5 x1.5 mm , lock rail 83.50X 44.45 X 1.50mm and bottom rail150.00X 44.50 X 2.50mmincl necessary aluminium fittings like aluminium butt hinges 04 Nos , aluminium handles 150mm 02 Nos,aluminium tower bolts 200mm 01No, mortice lock 4 lever MS, hydraulic door closer of suitable capacity 01 No, aluminium door stoper 01 Nos, jointing cleats,glazing cleats,rubber packing , anodised aluminium shape beading, screws etc with panelling in two parts with12mm thick prelaminated partical board in lower panel and 5mm thick tinted glass in upper panels incl all fittings& fixture, complete all as specified and as directed. |
| 21 | M&L Powder coated anodised aluminium three tracks sliding windows with frame size 60x40x2.00mm thick and shutter with section bearing bottom 25x18x1.50, top 39.4x17.7 X1.50 mm ( suitable for moving over three track fixed over top of frame work , top and side section of size 61.6 x 31.75x1.5mm and bearing bottom track of size 61.6x 31.75x1.5mm or fixing with hinges including necessary aluminium jointing cleats, glazing cleats, rubber packing anodised snape beading, screws etc with 5 mm thick tinted/ plain glass and wiremesh shuttersin panels with EPDM Gasket incl all fitting and fixture complete all as spesified and directed. |
| 22 | S&F for Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised complete all as specified and directed. |
| 23 | S&F in repair 5.50mm thick plain Sheet glass, selected quality and glazing with oil putty in squares exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 24 | S & F in Repair powder coated aluminium anodised section 40 x 44mm x14 gauge for aluminium partition wall in wall in panel 1m x1m covered with 5mm thick plain/frosted tinted glass on top half portion and 5 mm thick ACP sheet fixed in half bottom portion including V beading at Aluminium Grill edges complete all as specfied and directed. |
| 25 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed. |
| 26 | M&L 25 mm thick PCC 1:2:4, Type B1, using 20 mm graded stone aggregate, below tiles for levelling of existing surface complete all as specified and as directed. |
| 27 | S&F Glazed coloured Vitrified tiles(light shade) 10 mm thick (square/ rectangular) polished, area of each tiles Not exceeding 0.36 sqm, in floors etc. laid over 15 mm thick cement screed in cm 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the shade of tile complete all as specified and as directed. |
| 28 | S& F Vitrified coloured ceramic tiles 10mm thick dark shade/ Double charged/ ultracharged ( Square / rectangular) polished, area of each tiles exc 0.42 sqm and n.exc 1.00 sqm in floors etc, laid over 15 mm thick cement screed in cm 1:6, set and jointed in neat cement slurry and pointedpointed in white or coloured cement to matchcomplete all as specified and as directed. |
| 29 | S & F non skidceramic coloured tiles 7 to 8mm thick area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match, over 15mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 30 | M&L glazed coloured ceramic tiles, 600x300x7mm thick, in vertical surfaces such as skirting/dado etc, set and jointed in cement slurry, laid over & including 10mm thick renderingin cement mortar 1:4, set, jointed and pointed in white cement mixed with colour pigment to match the shade of tilecomplete all as specified and as directed. |
| 31 | M&L for 18-20 mmthick of approved shade granite stoneZ Black (superior Quality) slab (table rubbed and polished as in floors, jambs, steps, cooking platform etc and the like, over & including 15 mm thick screed in CM 1:6, pointed in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including two strip of line make on (tread of stair case) granite complete all as specified and directed |
| 32 | M&L for 20-25 mm thick machine cut kota stone slab flooringjointed and pointedwith grey cement slurry mixed with pigment to match the shade of the slab laid over 20 mm thick screed bed of CM 1:4 including rubbing and polishing complete all as specified and directed by Engr -in Charge. |
| 33 | M&L for 20-25 mm thick machine cut kota stone slab in riser, steps and skirting jointed and pointedwith grey cement slurry mixed with pigment to match the shade of the slab laid over 20 mm thick screed bed of CM 1:4 including rubbing and polishing complete all as specified and directed by Engr -in Charge. |
| 34 | Taking down cement plaster/grit plaster on brick or stone walls etc. including raking out of joints, hacking for key, scrubbing down with water etc. of any description complete all as specified and as directed. |
| 35 | M&L 15mm thick renderingin cement mortar 1:6 onbrick or concretesurfaces of walls, finished the surfacefair and even without using extra cement complete all as specified and as directed. |
| 36 | M & L 15 mm thick renderingin cement mortar (1:4),on brick or concrete wall surface, mixed with water proofing compound @ 3% by weight of cement, finished fair & even without using extra cement complete all as specified and as directed. Note:- Water Proofing Compound will be measured and paid separately. |
| 37 | M&L 5 mm thick renderingin cement mortar 1:4 onbrick or concretesurfaces of ceiling, finished the surfacefair and even without using extra cement complete all as specified and as directed. |
| 38 | Supply only water proofing Compound |
| 39 | M&L preparation of new plastered ceiling surfaces and applying two coats of Oil Bound Distemper over and including over and including 1 mm thick cement based wall care putty complete all as specified and as directed. |
| 40 | M&L preparation of new plastered wall surfaces and applying two coats of Oil Bound Distemper over and including over and including 3 mm thick cement based wall care putty complete all as specified and as directed. |
| 41 | M&L preparation of new plastered wall surfaces and applying applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. (Colour scheme shall be as approved by the GE & user)over and including a coat of priming paint, over and including 1 mm thick cement based wall care putty to make surface even and smooth complete all as specified and as directed. |
| 42 | M & L for preparation of old decorated, wall surface by scrapping by electrically operated grinder machine/electric regmal machine andapplying one coat ofwall care putty on patches surfaces then scrubbing by sand paper to prepare a even surface and applying priming paint followed by applying two coats of OBD of any colour washing down with water complete all as directed. |
| 43 | M&L for preparation of old decorated, wall, roof(corrugal) surface, by brooming and removing all loose layersof old treatment, efflorescence soot and moss by wire brush and filling all nail holes and patches with cement based wall care putty and applying one coat of weather proof Exterior emulsion paint of colour & shade as approved(to match with the Existing surface) complete all as specified and as directed.Note: Quoted rates shall deemed to be includs painting at any height including scaffolding work, as required. |
| 44 | Supply andfabrication & fixing of Modular wardrobe,cupboards, cabinets, drawers , shelfs, vanity , dressing table including shutters ( depth of 45 Cm up to 70 Cm)etc , all front side, bottom, top, two sides and partions etcmade out of 15-18 mm thickHDHMRboard and back side made out of 8 - 10 mm thick HDHMRboardwith machine pressed 0.5 to 0.8 mm thickfabric/glossy colourlaminateon all exposed front sideand other sidesdecorative laminations. All exposededges ofboardswith machine pressededge band 0.8mm from rehau Germanetc(colour of laminates , design& paterns ofpartations/ etc as approved by GE) including all accessories of fittings -Auto/soft closing hinges for shutters , C/J gola profile for handel less, telescopic channels 18\"\" / 20\"\" long , rollers for smooths sliding of drawers, etc as required complete all as specified and as directed. (Note :Overall net size front sideincluding frame will be measured for payment purpose) |
| 45 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and frame worketc completeall as specified and as directed. |
| 46 | S&F Solid PVC Wall lining consisting of 5mm thick wood grain printedPVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed. |
| 47 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive offixing on to wall to make PVC Frame acomplete all as specified and directed. |
| 48 | S & F plain gypsum board panel 12 mm thick on ceiling with and including necessary GI frame work for seamless ceiling used with \" T \" , channel or any section including screws , cleats ,fasteners, clips and all required accessories , hangers etc of galvanized steel all as per manufacturer design conforming to IS-2095 and 2542(1981) the weight of the board shall be not less than 7 kg per sqmetc complete all as specified and directed. |
| 49 | S&FGRG (Glass fibre reinforced Gypsum) semi perforated 12 mm thick tiles of size 595 x 595 mm white colour of approved texture,design (Tegular) and patterns having moisture content less than 2%, humidity ressitance of 99% NRC 0.60 to 0.85 as per IS 8225:1987, Non combustible as per BS 476 Sub Head : 26.0 New Technologies and materials reflectance of 85% (Min) to be laid in true horizontal level suspended on interlocking metal \"T\" grid of hot dipped galvanised iron section of 0.33 mm thick (galvanised @ 120grams per sqm including both sides) comprising of main \"T\" runners of size 15 x 32 mm of length 3000mm,cross Tof size 15 x 32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items(galvanised @ 80 grams per sqm ) i e 50mm long, 8mm outer diameter M-6 dash fasteners,6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85 x 25 x2 mm. Galvanised iron perimeter wall angle of size 24 x 24 x0.40mm thick of length 3000mm to be fixed on periphery wall /partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws complete all as specified and as directed. |
| 50 | Demolition of unreinforced Concrete of any description and in any position not otherwise specifically provided for completed as directed. |
| 51 | M&L for 100mmPCC type D -2 (1:4:8) using 40 mm graded crushed stone aggregate as in Sub base complete all as specified and directed. |
| 52 | M&L for 80mm thick factory made chamfered edge cement concrete paver block of M-40grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 53 | M&L for rubber moulded Cement concrete chequered tiles 300X300X25 mm thick with grey cement & pigment, set & jointed over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed. |
| 54 | S&F factory made WPC railing combining WPC railing combining WPC Board/Fancy designer type grating and WPC frame 100% solid PVC (wood polymer composite) railing of required length and of 600 to 750 mm height, and 24 mm Thickcompising of K- Value 58-60 (Suspension Grade) , Calcium carbonate and natural fibres (Wood Powder/rice husk/wheat husk) and Non toxic additives, made from single extrusion process, WPC foam board with having minimum density 650 Kg/cbm and WPC frame having minimum density 780 Kg/cbm having a good screw holding capacity (Screw withdrawal strength of 2000 (Face) & 1100N (Edge), Minimum comprosing of 50 N/mm2, Modulus of elasticity 850 N/mm2 and resistance of speed of flame of Class A Category with property of being termite/ borer free water/ moisture proof and fire resistance. For WPC railing WPC Jalli to be fixed with WPC frame of size 75 x 50 mmwith necessary supporting length at vertical as well as horizontal at wall frames to be fixed with 75 x 75 mm GI L or SS Cleats to support vertcal frame length including demolition of existing RCC Jallii with frame complete all as specified and directed. Note:- The said item shall be fixed over boundary wall/ roof tops and in any other position as required on site. |
| 55 | S&F 10 mm thick toughenedfrosted glass door shutters of size area exc 1.50 Sqm but not exc 3 Sqm, including necessary floor spring hydraulically regulated, other side fixed on pivot CP fittings and fixtures, CP handles 300 mm long, CP locking arrangement, necessary cutting & holes moulding and fixed including engraving, emblem and lattering not exc 200 mm complete as per directed by Engr-in-Charge. |
| 56 | S&F in Repair of 4 mm thickAluminium Composite panel cladding of approvedquality and colour as approved by GE,fixing in MS frame at any height and including MS frame of size not exc 0.36 sqm (used in rect angular tubes of size 50.8mmx 25.4mm x 2.9mm thick or square tubes 38mm x38mm x 2.9 mm thick are used in frame) and filling the joints with all weather siliconsealant including all mouldings, cuttings, etc complete all as specified and directed. |
| 57 | Demolition of reinforced Concrete of any description and in any position not otherwise specifically provided for completed as directed. |
| 58 | M&L for RCC Nominal Mix Type B1 (1:2:4)( 20 mm graded stone aggregates)Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the likecomplete all as specified and directed. |
| 59 | Formwork (rough finished ) Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed. |
| 60 | Formwork (rough finished )Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed. |
| 61 | M&L mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping ends and binding with and incl mild steel wire ( annealed ) not less than 0.90 mm dia or securing with clips . |
| 62 | Ditto items No 61 but 5 mm dia and over upto and including 10 mm dia in stirrups . |
| 63 | S & F in repairs Vitreous china floor mounted WC( Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover, flushing cistern, with P or S trapwith all fitting and fixturecomplete all as specified and as directed. |
| 64 | S & F in repair Vitreous China wash down water closet pan (pedestal pattern) of size 580 mm white with ‘P’ or ‘S” trap, any pattern including Seat Cover (excluding flushing cistern and flush pipe) complete all as specified and as directed. |
| 65 | S&F in repair PVC connection 15mm bore with PTMT nuts of length 600mm complete all as specified and directed. |
| 66 | S&F in repairs, health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube andABS wall hook including making connection and fixed in position complete in all respect as specfifiedand directed by Engr-in-Charge. |
| 67 | S&F in replacement for CP toilet paper holder fixing to wall with ss screw compete all as specified and directed. |
| 68 | S&F insheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long. |
| 69 | S&F in repair white Wash Basin with full Pedestal fo size 560 x 415 x 820 mm complete all as specified and directed. |
| 70 | S&F 15mm bore brass CP WHB mixer swan neck type for mixing hot & cold, elbow operated water screwed down for iron pipe and fixed complete. |
| 71 | S & F in repair looking mirror 450 mm x 600 mm bevelled edge mirror or selected quality glass, mounted in PVC moulded frame and fixed to wooden plugs with chromium plated brass screws and cup washers complete. |
| 72 | S&F in repair Stainless steel sink 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 73 | S&F in repairs Kitchen sink mixerofcast copper alloy , fancy type, chromium plated, and mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. |
| 74 | S&Fin repairs wall mixer 3-in-1 systemwith provision for both hand shower and overhead shower complete with 115 mm long bend pipe, connecting legs wall flange(excludingshowers)of cast copper alloy , fancy type, chromium plated, and mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed. |
| 75 | S & Fin repair 100/110 mm dia PVC floor trap , with Stainless steel floor waterGrating withcockroachtrap100 mm to 125 mm dia with or without hole for waste pipe including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed. |
| 76 | S&F15 mm bore angle stop valves cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed withr iron pipe of union. |
| 77 | Dismantling water tanks including ball valve and all other connection cap exc 500 ltr but n.exc 1000 ltr and removing from site complete all as specified & directed by Engg in Charge. |
| 78 | S&F Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position including minor repairing to iron pipe for making connections all as specified in SSR Part In any position white in colour 1000 ltr capacity complete all as specified. |
| 79 | Taking up or down 25mm bore steel tubingand connections, including cleaning for refixing or removal to store |
| 80 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store |
| 81 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store |
| 82 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings with outer dia 25mm on walls/ceiling or laying in floors complete all as specified and as directed. |
| 83 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings with outer dia 20mm on walls/ceiling or laying in floors complete all as specified and as directed. |
| 84 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings with outer dia 16mm on walls/ceiling or laying in floors complete all as specified and as directed. |
| 85 | S&F in repair CP Bib Cock 15mmlong body with flangecomplete all as specified and as directed. |
| 86 | S&F in repairCP Soap Dishincluding chromium plated brass screws and plastic cleats complete all as specified and as directed. |
| 87 | Dismantling of PVC pip & fitting of any description & position up to 100 mm dia complete all as specified & directed. |
| 88 | PVC (SWR) 75 mm borepipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. |
| 89 | S&F PVC (SWR) 75 mm bore pipe single socketed, in anylength with rubber ring jointes , laid in trenches or in floor complete all as specified and directed. |
| 90 | S&F PVC (SWR)110 bore pipe single socketed, in anylength with rubber ring jointes , laid in trenches or in floor complete all as specified and directed. |
| 91 | S&F PVC (SWR)110 bore pipe single socketed, in anylength with rubber ring jointes ,fixed to wall complete all as specified and directed. |
| 92 | S&F 75mm borePVC (SWR) vent cowl complete all as specified and directed. |
| 93 | S&F 110 x 75 mm PVC (SWR) reducers complete all as specified and directed. |
| 94 | S & F SS clamps heavy duty of 20 mmx 2 mm thick fixed by 8mm fastener for fixingPVC Pipe of 75 mm boreto wall or roof copletet all as specified and directed. |
| 95 | S&F 110 mmPVC (SWR) junction single, (Single T) equal or unequal with access door. |
| 96 | S&F75mmPVC (SWR) junction single, (Single T) equal or unequal with acces door. |
| 97 | S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 98 | S&F75 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 99 | Demolition and breaking up drain pipes (Salt glazed stoneware)/pvc set in cement mortar 150 mm internal dia of pipe complete all as specified and directed. |
| 100 | M&L for 150 mm nominal size (DWCPE) Double wall corrugaged poly ethylene pipe ((SNB) including all fixing accessories of fittings like socket/spigot joint with elastomeric sealing ring, rubberring, SILAID rubber lubricants required for laying of pipes, laid in trenches, complete all as specified and as directed. |
| 101 | M&L cement mortar concrete bed to drain pipes in PCC 1:3:6 type C-2 (using 40 mm graded crushed stone agg) incl packing under andagainst the sides of pipes after they are laid and tested in bores of pipe150mm dia complete all as specified and directed. |
| 102 | S&F 20 mm bore Brass Elbow for fixing of cpvc pipe complete all as specified and directed. |
| 103 | S&F 20 mm Brass Tee for fixing of cpvc pipe complete all as specified and directed. |
| 104 | S&F 20 mm Female Brass Threaded Adaptor (MTA/ MBTA) ) for fixing of cpvc pipe complete all as specified and directed. |
| 105 | S&F 20 mm Male Brass Threaded Adaptor (MTA/ MBTA) ) for fixing of cpvc pipe complete all as specified and directed. |
| 106 | Demolition of unreinforced cement concrete in ground floors and paving N exc 15cm thickness( below or above ground level)including disposal of all debris outside MoD land complete all as specified and directed. |
| 107 | M&L 75 mm thick PCC 1:3:6, type C-2, using (40mm graded stone aggregate) as in plinth protection and finished the surface even and smooth without using extra cement, laid in panel, including filling the joints with sand mixed with bitumen in 1:1 ratio complete all as specified and as directed. |
| 108 | S & F in repair vertical Roller venition blinds of special collection self adjusting system of louvers size 100 mm wide (as approved by GE) with aluminum top rail and PVC bottom, weight attached with 100 mm strip complete with chain all as specified and directed by Engr-in-Charge. |
| 109 | Taking down copper/aluminium point wiring (light, socket or power) complete, excluding fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc all as specified and as directed. |
| 110 | Taking down the existing Exhaust fan/ Ceiling fan of any make or any sweep from its position and refixing in position complete all as specified and as directed. |
| 111 | Taking down old and unserviceable sub main wiring and removing from the site and making good the disturbed surface complete all as specified and directed. |
| 112 | M&L for point wiring concealed type with 1.5 sq mm Nominal cross sectional area, single core, 1100 Volt grade, multi stranded, PVC insulated, unsheathed FRLS copper conductor cable and connected to common earth and earth dollywith suitable copper lugs and drawing into and including rigid non-metallic PVC Concealed conduit of 20mm dia or higher, medium grade complete with and including all PVC conduit accessories and modular metal flush box,modular white cover plate with frame, blanking plate etc suitable for upto required module etc complete and making good disturbed surfaces to match the existing for one light / bell / fan point controlled by one, one way switch 06 Amp, complete all as specified and as directed. |
| 113 | All as per item No. 112.00 here in before but for one three pin, 5 Amp, socket out let on same board completeall as specified and as directed. |
| 114 | All as per item No. 112.00 here in before but point wiring with 2.5 Sqmm,multistranded, copper conductor cable, for 15 Amps socket outlet on independent board with 2.5 Sqmm size earth conductor completeall as specified and as directed. |
| 115 | All as per item No. 112.00 here in before but point wiring with 4 Sqmm,multistranded, copper conductor cable,on independent board with 4 Sqmm size earth conductor completeall as specified and as directed. |
| 116 | S&F in repalacement sheet metal enclosure with socket plug top, single pole and neutral enclosure with a two pin earth plug and socket complete with one MCB of capacity 20 Amps , 240 Volts complete all as specified and directed. |
| 117 | S&F in replacement modular Socket, 6Amp, 2/3 Pin, combined, 2 modulecompleteall as specified and as directed. |
| 118 | S&F in replacement modular switch, 1 way, 6 Amp, 1 Module, completeall as specified and as directed. |
| 119 | S&F in replacement modular Socket, 16/6 Amp, 3/5 Pin, combined, 2 modulecompleteall as specified and as directed. |
| 120 | S&F in replacement modular switch, 1 way, 16 Amp, 1 Module, completeall as specified and as directed. |
| 121 | S&F in replacement Modular Bell push 6A 1 module all as specified and as directed. |
| 122 | S&F in replacement Buzzer, Ding Dong AC. 230 volts, single pole all as specified and as directed. |
| 123 | S&Fmodular blanking plate, 1 Module complete all as specified and as directed. |
| 124 | M&Lof sub main wiring with 2 runs of10 sqmm single core, PVC insulated & unsheathed cable 1100 Volts grade with multi stranded, copper conductor drawn through concealed conduit including PVC rigid conduit 25 mm medium grade as per ISS and one run of 06 sqmm sizeearth wire PVC insulated copper conductor complete all as specified and directed.(Note Two runs of 10 sqmm copper FRLS cable & one run of 10 sqmm copper cable in and including 25 mm PVC conduit medium grade will be measured as one unit. |
| 125 | M&L of sub main wiring with 2 runs of6 sqmm single core, PVC insulated & unsheathed cable 1100 Volts grade with multi stranded, copper conductor drawn through concealed conduit including PVC rigid conduit 25 mm medium grade as per ISS and one run of 06 sqmm sizeearth wire PVC insulated copper conductor complete all as specified and directed.(Note Two runs of 6 sqmm copper FRLS cable & one run of 06 sqmm copper cable in and including 25 mm PVC conduit medium grade will be measured as one unit. |
| 126 | S&F in replacement Ceiling rose, PVC/ polycarbonate, isolated body type, three terminal, 240 volt,fixed in position & connecting completeall as specified and as directed. |
| 127 | S&F in replacementBldgsecurity light fitting LED 25 Watt, highly efficient IP66 LED,high power having aluminium pressure die cast housing and PC cover in the front and high power lens for batwing light distribution withelectric connection with suitable size of PVC insulated copper wireincluding GI bracket 1.5 Mtr with clamps and bolts complete all as specified and directed. |
| 128 | Supply, fixing and connecting in replacement recessed mounting Ultra slim Round LED Down light 12 watt designed white colour,with excellent thermally managed aluminum pressure die cast housing with heat - dissipating fins for large surface area finished in epoxy powder coated , deliver high efficacy lightcomplete with all accessories all as specified and as directed. |
| 129 | Supply, fixing and connecting in replacement of Slim LED Batten 10 watt with Surface/Wall Mounted integrated LED 2 feet Fitting Polycarbonate housing and diffuser with viewing angle of 120 degree used to enhance the luman output Height suitable forWhite Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection up to2.5KV . Total system Lumen of 10W Led should be 1000 or above in Cool day Light(6500K), Power factor>0.9, CRI (Ra) >80, System with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed. |
| 130 | Supply, fixing and connecting in replacement of Slim LED Batten 20 watt with Surface/Wall Mounted integrated LED 4 feet FittingPolycarbonate housing and diffuser with viewing angle of 120 degree used to enhance the luman output Height suitable forWhite Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection up to2.5KV . Total system Lumen of 20W Led should be2000 or above in Cool day Light(6500K), Power factor>0.9, CRI (Ra) >80, System with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed. |
| 131 | Supply, fixing and connecting in replacement recessed mounting back- lit LED 2X2, 36 watttile in CRCA housing with full opal diffuser suitable for Armstrong/ Grid Ceilings Type, size 595X595mm (Nominal),High lumen efficacy LED with viewing angle of 120 degree used to enhance the luman output Height suitable forWhite Housing & Isolated Electronic Driver, with Output Short-circuit protection, Surge Voltage protection minimum 2.5KV, safety & performance test as per IS:15885 Total system Lumen not less than 3600, in Cool day Light (6500K), Power factor>0.95, CRI (Ra) >80 with Average life of 50000 Burning hours complete with all accessories as required complete all as specified and as directed. |
| 132 | S & F in replacement Heavy Duty Metallic Ventillation Fan300 mm sweep 240 Volt, 1325RPM , Air delivery 500 CMM connection with self closing louver frame flexible PVC copper wire from ceiling rose to exhaust fan including provn of opening of hole on brick wall and grouting nut and bolt of suitable size complete all as specified and directed. |
| 133 | S&F in replacement modular Fan step regulator, 120W - 2 module completeall as specified and as directed. |
| 134 | S&F in replacement load line, distribution board, double door type, VTPN 4 way, suitable for accomodating upto 125 Amps MCCB with incomming frame three pole, including 250 Amp copper bus bar, neutral link, blanking plates etc complete all as specified and as directed. |
| 135 | M&L Earthing complete with galvanised Iron earth plate eletrode 600x600x6mm thick, burried directly in ground (earth pit not less than 2.25mtrdeep below GL) with top edge of the plate not less than 1.5 metre below normal grond level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15cm all round the plate with using 4mm dia GI wire as earth wire electrode welded and revetted to earth plate at one end connected to main DBs of Building at another end GI earth wire encased in and including 15mmbore GI light grade pipe through upper end of earth plate upto main DB of bldg, with 20mm bore GI pipe light grade as water pipe from earth chamber to upperedge of earth plate, MS funnel with wire mesh fixed on water pipe including execvation earth work, Provn ofPCC pit in PCC 1:2:4 type B-1 chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type BI duly reinforeced with MS bars 8mm dia @ 150 mm centre to centre, both ways complete with lifting handle all as shown in electrical plate No 3 of SSR of part-I complete all as specified and as directed. |
| 136 | S & F in replacement for distribution board double door type, SPN, 16 way,completeincluding 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed. |
| 137 | S & F in replacement for distribution board double door type, SPN, 12 way,completeincluding 200 Amps rated bus bar, neutral link, blanking plates etc complete all as specified and directed. |
| 138 | S & F in replacement MCCB 415 V, 125Amps, 25 KA, 4 Pole complete all as specified and directed. |
| 139 | S & F in replacement MCB DP, 240 Volts, 63 Amps complete all as specified and directed. |
| 140 | S & F in replacement MCB SP, 240 Volts, 10 Amps complete all as specified and directed. |
| 141 | S & F in replacement MCB SP, 240 Volts, 16 Amps complete all as specified and directed. |
| 142 | S & F in replacement MCB SP, 240 Volts, 25 Amps complete all as specified and directed. |
| 143 | S & F in replacement MCB SP, 240 Volts, 63 Amps complete all as specified and directed. |
