Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete incl terrazo flooring (un-reinforced) in ground floor and paving not exceeding 15cm thick (below or above ground level)complete all as specified and as directed. |
| 2 | M&L for 75 mm thick cement concrete type D2 1:4:8 (using 40 mm graded stone agg) in sub base of flooring/ hard standing complete all as specified and as directed. |
| 3 | M&L for 25mm thick PCC 1:2:4 type B1 (20mm graded stone aggregate) in flooring, complete all as specified and as directed. |
| 4 | M&L for 75 mm thick cement concrete type C2 1:3:6 (using 40 mm graded stone agg) as in plinth protection and path laid in panels, not more than 3.0 mtr in length, laid to slope 1:30 incl forming joints 10mm wide and duly filled with mastic bitumen (01 part bitumen mixed with 03 parts of sand) surface, complete all as specified and as directed.(Note : The quoted rates are deemed to be inclusive of material against form work and joint fillings.) |
| 5 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed. |
| 6 | M&L for non skid ceramic coloured tiles, 7 to 8 mm thick (square / rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm,as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles, over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed. |
| 7 | M&L for glazed ceramic coloured tiles in vertical surface of size 350 X 250 x 7/ 450x300x7 mm thick, joint less type, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles, complete all as specified and as directed. |
| 8 | M&L forjoint free non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18 Sqm but n. exc 0.38 Sqm, in floor, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and as directed. |
| 9 | All as per item 8.00 here-in-above but on vertical surfaces such as skirting/dado over and including 10 mm thickrendering (backing coat) in CM (1:4), complete all as specified and as directed. |
| 10 | Dismantling stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar as in floors, aprons, etc. complete all as specified and as directed. |
| 11 | M&L for factory made machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with coloured pigment made of PVC moulded (or rubber mould) with vibrating system, with and including 50 mm thick sand cushioning, including plasteringin CM (1:3) to edges of paver block, complete all as specified and as directed.(Note : The cost of sand cushion and plastering to edges is included in quoted rate.) |
| 12 | M&L for machine cut kota stone slab flooring 18-20 mm thick, over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and mirror polishing over and including 15 mm thick screed bed in CM (1:4) complete all as specified and as directed.(Note: Kota stoneslab in steps (tread) shallbe provided in single piece with visible edges chamfered & provided with two grooves at front edges and cost for the same is included in the quoted rate.) |
| 13 | M & L for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 10 mm thick backing coatin CM 1:4 complete all as specified and as directed.Note: Kota stone in Step will be placed in single piece with groove lines at edge. |
| 14 | M&L 20 mm thick granite slab of any type , tabled rubbed, machine cut, duly grinding, polishing, moulding etc of all outer edges / sharp corners, duly fixed in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4), incl pointing in grey cement (1:2) using marble dust with admixture of pigment to match with the shade of slab, complete all as specified and as directed. |
| 15 | Dismantling timber scantling 40.0 sqcm and over in section in any position as in framed / unframed works such as roof purlins, rafters, fillets, ridges etc as in roof/ ceiling, complete all as specified and as directed. |
| 16 | M & L18/19 mm thick factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations, kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, including dismantling of old boarding, cupborad any description, fixed in any position including fittings, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges shall be paid separately) |
| 17 | M & L25 mm thick factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations, kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws,including dismantling of old boarding, cupborad any description, fixed in any position including fittings , all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges shall be paid separately) |
| 18 | Providing and fixing 2mm thick 18 to 25 mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in-charge. |
| 19 | S&F continuous (piano) hinges, mild steel bright finish in electro galvanized width of flat (when open) in 30mm, complete all as specified and as directed |
| 20 | S & F drawer/shutter handles, projection drop (50mm to 65mm) on screwed platey complete all as specified and as directed |
| 21 | S & F 100 mm aluminium anodise hasp and staple, safety type, aluminium anodisedwith hinge pin including bolt to hinge plate and fixed with screw complete all as specified and as directed |
| 22 | Supply & Fixstainless steel magnetic catcher fancy type for kitchen cabinet / drawer complete all as specified and as directed by Engineer-in-Charge. |
| 23 | S&F in repair Rubber bush (door seal) of 25mm wide fixedto door complete all as specified and as directed |
| 24 | Demolition of brick work built in cement mortar or lime mortar including all quoins, arches, pillars etc complete all as specified and as directed. |
| 25 | M&L for brick work with old size fly ash bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 26 | M&L forBrickwork with subclass ‘B’ burnt bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 27 | M&L for half brick thick wall with old size fly ash bricks, straight or curved on plan to any radius built in cement mortar 1:4, complete all as specified and as directed. |
| 28 | M&L for10 mm rendering thick in CM (1:6) on fair faces of brick work/concrete surfaces finished even & smooth (without using extra cement) including taking down cement plaster on brick or stone wall,dado and skirtingetc including racking out joints hacking for key scrubbing down with water etccomplete all as specified and as directed. |
| 29 | M&L for rendering 15mm thick in two coats (1st coat 10 mm thick in CM 1:6 & 2nd coat 5 mm thick in CM 1:4 with WPC) on fair faces of brick work/concrete surfaces, finished even & smooth (without using extra cement) including taking down cement plaster on brick or stone wall,dado and skirtingetc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. Note: WPC in 5 mm thick 2nd layer plaster measured and paid separately. |
| 30 | M&L for5 mm rendering thick in CM (1:3) on fair faces of concrete surfaces in ceiling finished even & smooth (without using extra cement) including taking down cement plaster on brick or stone wall,dado and skirtingetc including racking out joints hacking for key scrubbing down with water etccomplete all as specified and as directed. |
| 31 | M&L for10 mm rendering thick in CM (1:6) on fair faces of brick work/concrete surfaces finished even & smooth (without using extra cement), complete all as specified and as directed. |
| 32 | M&L for rendering 15mm thick in two coats (1st coat 10 mm thick in CM 1:6 & 2nd coat 5 mm thick in CM 1:4 with WPC ) on fair faces of brick work/concrete surfaces, finished even & smooth (without using extra cement), complete all as specified and as directed. Notes: WPC in 5 mm thick 2nd layerplaster measured and paid separately. |
| 33 | M&L for preparation of new plastered of wall surface and applying two coats of oil bound distemper, over a coat of chalk whitening primerover and incl a layer 3mm thick of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed. |
| 34 | M&L forpreparation of surfaces of wallsand applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint (weather proof)of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces. complete all as specified and as directed.Note : The contractor shall produce batch certificate & delivery challans directly from paint manufacturer to establish the authenticity of the material. The batch testing certificate shall be brought at the site along with paint manufacturer\"s drums with seal intact. |
| 35 | M&L for preparation of newly plastered surfaces and applying three coats of white wash on wall all as specified and directed. |
| 36 | M&L for preparation of newly plastered surfaces and applying two coats of white wash on ceiling all as specified and directed. |
| 37 | M&L for complete removal of existing treatment and preparation of surfaces of walls by scrapping/sand paper rubbing and finally washing with wateringand applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint (weather proof)of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces. complete all as specified and as directed.Note : The contractor shall produce batch certificate & delivery challans directly from paint manufacturer to establish the authenticity of the material. The batch testing certificate shall be brought at the site along with paint manufacturer\"s drums with seal intact. |
| 38 | M&L for complete removal ofexisting treatment and preparation of surfaces of walls by scrapping/sand paper rubbing and finally washing with watering preparation of newly plastered surfaces and applying three coats of white wash on ceiling all as specified and directed. |
| 39 | M&L for complete removal of existing treatment by brushing, washing, rubbing down, scraping from old treated surfaces of wall and applying two coat of oil bound distemper over a coat of chalk whitening primer, over a layer of (JK/Birla) 3.0 mm thick wall care putty to get smooth and level finish, complete all as specified and as directed. |
| 40 | M&L for complete removal ofexisting treatment and preparation of surfaces of ceiling by scrapping/sand paper rubbing and finally washing with watering preparation of newly plastered surfaces applying two coats of white wash on ceiling all as specified and directed. |
| 41 | M&L for preparation of old steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and as directed |
| 42 | Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but not exceeding 4 sqm each including cutting holes in brick/ stone wall built in cement / lime mortar, embedded portion exc half brick but n.exc one brick for inserting new hold fast and making good the disturbed portion/surfaces, in CM 1:3 complete all as specified and as directed. |
| 43 | All as per item here-in-above but not exc 1.5 sqm each |
| 44 | Taking down shutters of any description not exc 01 Sqm each, complete all as specified and as directed. |
| 45 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm (± 5 mm tolerence in dimension) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fastenersincl in this item of required dia and length complete all as specified and as per direction of Engineer-in-Charge. |
| 46 | S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed. |
| 47 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick prelaminatedcolour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 48 | S&F Factory made single 30 mm thick extruded WPC (Wood Polymer Composite) solid moulded flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 49 | S&F Factory made single 35 mm thick extruded WPC (Wood Polymer Composite) solid moulded flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as per direction of Engineer-In-Charge. |
| 50 | M&L 30mm thick factory made solid WPC (Wood plastic composit) moulded gauged door shutter with wire mesh in any number of division with brown wood grain texture, including stainless steel wire shall mesh be fixed with 15x15 Square tube in side rails with screwing 8x28 heat metal zink coated screws can be remove or fie again of the shall be as per manufacture instruction complete all as specified and complete all as specified and complete all as specified and as directed. |
| 51 | S &F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm prelaminatedcolour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed. |
| 52 | M&L for box type steel window with 80x40x1.25 mm MS tubular frame with side hung shutters ( double shutter for glass and gauze) without sash bars jointed together with and incl grill using12 mm square bar @ 10 cm C/C incl box type hinges with steel handle and steel pag stay complete glazing barsdoweled and welded complete all as specified as directed. Note:-(a)The 4.0 mm thick plain glass andwiremesh of 0.56 mm in nominal dia of wire andaverage width of aperture 1.18 mm are included in quoted rates. (b) Side hung Z-Section shutter shall be of size 20mm x 20mm x 25mm and 3 mm thick. |
| 53 | M&L for box type steel window with 80x40x1.25 mm MS tubular frame with side hung shutters ( double shutter for glass and gauze) without sash bars jointed together with and incl grill using12 mm square bar @ 10 cm C/C incl box type hinges with steel handle and steel pag stay complete glazing barsdoweled and welded complete all as specified as directed. Note:-(a)The 4.0 mm thick plain glass andwiremesh of 0.56 mm in nominal dia of wire andaverage width of aperture 1.18 mm are included in quoted rates. (b) Side hung Z-Section shutter shall be of size 20mm x 20mm x 25mm and 3 mm thick. |
| 54 | S&F of aluminium alloy anodized sliding door bolt 300mm (aldrop bolt) length with hasp staple and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixedcomplete all as specified and as directed |
| 55 | S&F of 100 mm size butt hinges, extruded aluminum alloy with galvanized mild steel pin type B-21anodized complete all as specified and as directed |
| 56 | S&F of 150mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and as directed. |
| 57 | S&F of 150mm aluminum handle cast type anodized complete all as specified and as directed. |
| 58 | S&F of mild steel ordinary rat tail rod pattern springs of size 300mm including roller and roller plate complete all as specified and as directed |
| 59 | S&F of 140 mm door stopper of aluminium body and tongue anodized with hard drawn steel spring fixed in floor complete all as specified and as directed. |
| 60 | S & F in repair stainless steel curtain rod 25mm dia steel pipe cutting into length as required at site with and incl SS end caps/lobs and SS wall mounting brackets, complete all as specified and as directed. |
| 61 | S & F in repair stainless steel rod 15mm dia steel pipe cutting into length as required at site with and incl SS end brackets, fixed in cupboard and similar works, complete all as specified and as directed. |
| 62 | S&F of ringfit PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall, including taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern complete all as specified and as directed. |
| 63 | S&F of PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors,including taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern complete all as specified and as directed. |
| 64 | S&F of Ringfit PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall, including taking down of eaves gutter and rain / waste water pipes including all fittings any size and patterncomplete all as specified and as directed. |
| 65 | S&F of PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, including taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern complete all as specified and as directed. |
| 66 | S&F 110 mm bore PVC (SWR) bends of any radius, complete all as specified and as directed. |
| 67 | S&F 75 mm bore PVC (SWR) bends of any radius, complete all as specified and as directed. |
| 68 | S&F 110 mm bore PVC (SWR) junction single (Single `T\") equal or unequal, complete all as specified and as directed. |
| 69 | S&F 75 mm bore PVC (SWR) junction single (Single `T\") equal or unequal, complete all as specified and as directed. |
| 70 | S&F PVC (SWR) vent cowl 75mm bore, jointing to waste pipe, complete all as specified and as directed. |
| 71 | S&F PVC(SWR) vent cowl 110mm bore, jointing to waste pipe, complete all as specified and as directed. |
| 72 | S&F PVC floor trap of 75 mm outlet, jointing to waste pipe, complete all as specified and as directed. |
| 73 | M & L for PVC (SWR) gully trap 110 mm, setting and jointing with solvent cement complete all as specified and as directed. |
| 74 | S & F 15 mm bore Galvanized Steel tubes, medium gradefixed to walls and ceilings or laid in floors, concealed or open incl cutting of grooves including taking up or down with connections and fittings all as specified and directed |
| 75 | S & F 20 mm bore Galvanized Steel tubes, medium gradefixed to walls and ceilings or laid in floors,concealed or open incl cutting of grooves including taking up or down with connections and fittings all as specified and directed |
| 76 | M&L for cutting chases, pinning in for concealed water tubing, not exc 10 cm girth and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc complete all as specified and as directed. |
| 77 | S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered white colour 500 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, with and incl disconnecting and dismantling the existing un-serviceable PVC/RCC water tank on top of roof/slab of bldgs, complete all as specified and as directed. |
| 78 | S&F of 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed. |
| 79 | S&F of 20 mm dia of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iorn pipe and fixed. (minium weight 20 mm-210 gms) etc, complete all as specified and as directed. |
| 80 | S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm |
| 81 | S&F in replacement of stainless steel kitchen plate rack made out of 1 mm thick sheet of size 765x920mm and 220mm deep, weight not less than 7 Kg, complete all as specified and as directed. |
| 82 | S&F in repair 600x450mm size and 4mm thick beveled edge looking mirror of selected quality glass, having PVC moulding/beading all around, mounted on 4mm thick PVC board, with and incl fixing accessories, complete all as specified and as directed. |
| 83 | S&F in replacement of pillar taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure,with long screwed shanks and fly-nuts, complete all as specified and as directed. |
| 84 | S&F in replacement of stop cock with long shank and cup (concealed type), 15mm dia with wall flange, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe / unions, complete all as specified and as directed. |
| 85 | S&F in replacement of overhead shower of dia 125 mm round shape single flow, ABS body chrome plated fancy type, with and incl swivel type shower arm of 20mm dia with wall flange made of cast copper alloy, chromium plated fancy type,complete all as specified and as directed. |
| 86 | S&F in replacement of long body bib cock, 15 mm dia with wall flange made of cast copper alloy, chromium plated,complete all as specified and as directed. |
| 87 | S&F in replacement of angular stop cock 15 mm dia with wall flange made of cast copper alloy, chromium plated type, complete all as specified and as directed. |
| 88 | S&F in repair SS grating of squre/round shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and incl fixing with CM to floor/nahani traps etc, complete all as specified and as directed. |
| 89 | S&F in replacement of towel rail 600 mm long D type between flange and wall bracket made of cast copper alloy, chromium plated, complete all as specified and as directed. |
| 90 | S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed. |
| 91 | S&F in replacement ofPVC multipurpose cabinet mirror with front openable door of overall size 350 x 450 mm, complete all as specified and as directed. |
| 92 | S&F in replacement of Brass CP connection 15mm dia and 45cm long with 2 Nos brass check nuts with washers for geyser, complete all as specified and as directed. |
| 93 | S&F in replacement of PVC waste pipe 32 mm dia 750 mm long with for wash hand basin or for kitchen sink, complete all as specified and as directed. |
| 94 | S&F in replacement of PVC connection 600 x 15mm dia PTMT (PVC), complete all as specified and as directed. |
| 95 | S&F in replacement of 10 ltr capacity PVC valve less symphonic action type flushing cistern, white, with inlet ball valve, float and handle with and including wall bracket, 32 mm dia PVC flush pipe and connected to squat pattern / pedestal pattern water closet, including all joints and making good to the wall & floor, complete all as specified and as directed. |
| 96 | S&F in replacement of 1st quality vitreous china squatting pan Orissa pattern of size 580x440 mm, white colour with integral foot rests water closet including flush pipe, P Trap and connecting conebut exluding flushing cistern, duly fixed in lime concrete bedding and making good of floor surface, complete all as specified and as directed. |
| 97 | S&F in replacement of 1st quality vitreous china wash hand basin, white flat/angle back, size 550x400mm, complete including necessary cutting for and pinning in ends of brackets) with and including wall brackets, PVC waste pipe of 750mm long, CP waste coupling of 32mm dia size,complete all as specified and as directed. |
| 98 | S&F in replacement of corner glass shelf 300 mm with Chromium plated bracket guard and railing and fixing accessories, complete all as specified and as directed. |
| 99 | Demolition of RCC Not exc 15cm thickness Roofs, floors (other than ground floors), beams staircases, landing, chajjas, Cover slab and similar suspended work |
| 100 | M&L for RCCM-20 (Nominal Mix) (20 mm stone agg) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as spd |
| 101 | M&L for mild steel deformed TMT bars 5 mm To 10mm dia (as in reinforcement) cut to length, bent to shape require including cranking, bending spirally for hooking for column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as spd and directed by engr in charge |
| 102 | M & L for rough finishformwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed. |
| 103 | Removing existing water proofing treatment by brushing with wire brush, cleaning of terracing by taking down cement concrete, existing plaster lime cova 80 to 100mm thick mud phuska/cement concrete/lime coba /brick layer etc, cleaning of all foreign material such as fungus mass dust etc, roughing surface of corner to roof by wire brush complete all as specified and as directed. |
| 104 | M&L of water proofing treatment to non-accessibleroof slabwith APP based modified polymeric membrane centre core 100mm micron HMHDPE outer film 20 micron each having thickness 3mm weight not less than 3kg/Sqm as per manufacturer’s instructions laidwith torch application complete all as specified and as directed by Engineer-in-Charge with following course of description below:-(a) 10 mm thick plaster in CM 1:4 with WPC (liquid water proofing compound @ 0.20 Ltr/bags(50 Kg Bag))will be applied over the roof slab (subjected to condition as mentioned in notes) . After the plaster is cured the roof will be tested for water tightness by ponding with water for seven days for any seepage is observed the rectification will be carried out by pressure grouting under the pressure of 5kg/sqcm using cement based grout. After the surface is repaired the slab will be tested for water tightness again before proceeding with further treatment. (b) the surface of roof, parapet and gutters, drain mouths, etc. over which waterproofing treatment is to be applied shall be cleaned of all foreign matter such as, fungus, moss, dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut around to tuck in the treatment. Concrete angle-fillets shall be provided at junctions between roofs and vertical faces of walls (parapet and other walls) around obstacles such as pipes, chimney stacks, etc. and other similar situation to ease up about corners.(c) Bitumious based primer confiorming to IS: 3384 @ 0.3 kg/Sqm to be applied on prepared surface, till the surface is propely impregnated. (d) After the application of approved bituminous primer the water proofing membrane shall be laid on the primed surface by torch application method as per manufacturer\"s instruction. The overlap while toching shall be 100mm in longitudinal direction and 100 mm in transverse direction. All overlap joints shall be sealed thoroughly by thermo fusing both the membrane layer and seling it with the help of hot trowel. The overlap joints shall be made as a monolithic layer.(e) All joints and changes in direction should be curved with cement mortar 1:3 mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane.(f) after apllication of APP membrane one coat of aluminium paint @ 0.20 Kg/Sqm over APP membrance will be appliedNote :The cost of all items i.e. from Sr No. (a) to Sr No.(f) are included in quoted rate and no separate payment will be done for the above except liquid WPC. |
| 105 | M&L for Cement concrete tiles 25cm x 25cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry with gray cement and no pigment in floors, roofs; cut and polished, over and including a layer of 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 106 | M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in padding levelling etc and roof kerbs,tank staging etc complete all as specified and as directed. |
| 107 | Demolition of cement concrete of any description and in any position of WC’s/Bathroom etc in sunken portion area above ground floor, removing demolished material completely and old waste pipe from sunken portion and cleaning the side/bottom surface of sunken floor with wire brush, complete all as specified and as directed. |
| 108 | M&LPCC 1:5:10 Type E2 using 40mm graded stone aggregate as in mass filling in two layer in sunken portion complete all as spd and directed |
| 109 | M&L for 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in padding levelling etc and roof kerbs with liquid water proofing solution finished even and fair with proper slope as prepatory works to water proofing treatment complete all as spd and directed by EIC.Note:-liquid water proofing solutionshall be provided in 150ml in 50 Kg of Cement by weight and cost of liquid water proofing solutionmeasured andpaid seperate itemcomplete all as specified and as directed. |
| 110 | M&L for 15mm thick plastering in CM 1:3 along the wall of toilet and bath mixed with 3 % WPC and finished even and smooth without using extra cement complete all as specified and as directed. |
| 111 | M&L forbitumen blown 80/100 grade applied hot, two coats to plasteredsurfaces of any description at the rate of 1.5 kg per sqm per coat complete all as specified and as directed. |
| 112 | M&L for Polythene film black 50 micron laid in floor complete all as specified and as directed. |
| 113 | M&Lfor 50mm dia G.Ipipe as in spoutto drain out ifany leakage occures in the sunken portion complete all as spd |
| 114 | Supply only integral liquid water proofing compound LW++, mixed in CM as per manufacturer instruction,complete all as specified and as directed. |
| 115 | Dismantling asbestos cement (corrugated or semicorrugate etc) sheetin roof covering, complete all as specified and as directed. |
| 116 | S&F of pre-painted 0.50mm thick Gavalume Aluminium Zinc coating GI based corrugated / semi corrugated / trapezoidal steel sheet of any colour having tensile strength 550 MPa and AZ 150 grade as in roof covering/cladding to walls, fixed with self tapping screws, complete all as specified and as directed. |
| 117 | S&F pre-painted Galvalume Aluminium Zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength 550 MPa and AZ 150 grade as in ridge of roof covering, fixed with self tapping screws, complete all as specified and as directed. |
| 118 | M&L for structural steel Fe-410-W(Gde-E-250) quality A for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified and as directed. |
| 119 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5 m depth, for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 sqm on plan and n.exc 1.5 m in dedpth and getting out hard/dense soil complete all as specified and as directed |
| 120 | M&L for Returning, filling in including spreading, levelling, watering and well ramming in layersnot exc 25 cm and getting in hard/densesoil complete all as specified and as directed. |
| 121 | M&L of removing excavated material nexc.50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed |
| 122 | M & L Reinforcement Cement concrete type B1 (1:2:4) using 20mm grades stone aggregate as in cover slab for draine & manholes etc. as directed incl use and waste of necessary form work complete all as specified and as directed. |
| 123 | M&L for cement concrete 1:2:4 type B1 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, copings, bond stones, bed plates for hold fast and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed. |
| 124 | S & F rolled mild steel in Fe 410-W (Gde-E- 250) quality-A as in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 125 | M&L DWCPE(SN8) 200 (OD)/175(ID)mm diameter Pipes laid on 150 mm thick bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional for depth of manhole 0.70m to 1.65m depth |
| 126 | Taking down carefully existing copper/aluminium point wiring (light,fan, socket or power) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, regulators, sockets, bell push and call bell wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc andmaking good the disturbed surfaces of walls, floors, ceiling etcwith cement plaster, putty and paint to match with the existing surface complete all as specified and as directed. |
| 127 | M&L for point wiring for Modular fittings complete with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of Modular cover plates with frames and 1.50 sq mm PVC insulated unsheathed stranded copper conductor (FRLS) cable for common earth and connecting to earth dolly, complete all as specified and as directed by Enrg-in-charge. (Note- rates of chasing/cutting & making goods shall be included in the unit rate) :- |
| 128 | One light point/ceiling fan/exhaust fan controlled by one switch |
| 129 | One Bell point controlled by one switch |
| 130 | One 6A socket point controlled by one switch on independent board |
| 131 | One 6A socket point controlled by one switch on same board |
| 132 | One light point controlled by two 2 - w a y s w i t c h e s, complete. |
| 133 | All as per srl item No 127 here-in-before but with 2.5 sq mmFRLS copper wire with 2.5 Sqmm FRLS copper earth wire for one 16 Amp socketpoint controlled by one 16 Amp switchon independent board. |
| 134 | Taking down submain wiring of any size any type and in any position metalic/non metallic PVCconduit of wooden batten complete all as specified and as directed. |
| 135 | M&L for submain wiring alongwith earth wire 2 runs x 6 sqmm + 1 run x 6 sqmm with FRLS insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit ISI Markedconforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc, complete all as specified and as directed by Engineer-in-Charge.Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length |
| 136 | S&F of Modularswitch1way6A,1 module 240V, 50Hz complete all as specified and as directed. |
| 137 | S&F Fan step regulator, 120W - 2 module, 240V, 50Hz ISI marked with valid CML complete all as specified and as directed. |
| 138 | S&F of Modular Socket,6A - 2/3 pin combined 2 module 240V, 50Hz complete all as specified and as directed. |
| 139 | S&F of Modularswitch1way16A,1 module 240V, 50Hz complete all as specified and as directed. |
| 140 | S&F of Modular Socket6A/16A - 2/3 pin combined 2 module 240V, 50Hz complete all as specified and as directed. |
| 141 | S&F of Modular switch 2 way 6A,1 module 240 V, 50 Hz complete all as specified and as directed. |
| 142 | S&Fof Modular blank plate 1 module complete all as specified and as directed. |
| 143 | S&Fangle holder, metal cased, bakelite body, 240 volts, ISI marked with valid CML complete all as specified and as directed. |
| 144 | S&FCeiling rose, three terminals, bakelite body, 240 volts, ISI marked with valid CML complete all as specified and directed. |
| 145 | S&F of Modular Bell Push , flush type, 6Amp, 1 module50Hz complete all as specified and as directed. |
| 146 | S&F electric bell of DINGDONG type,240 volts, ISI marked with valid CML single pole and making all necessary connections, complete all as specified and as directed. |
| 147 | Supply and fixVentilataing fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50HZ, RPM 1200, Copper winding of sweep 250 mm including connection with 1.5 sqmm, three core copper wire from ceiling rose to exhaust fan upto 1 mtr length including fixing on ventilator complete all as specified and as directed by Engr-In-Charge. |
| 148 | Taking down light fitting of any capacity and any sizeand in any position complete all as specified and as directed. |
| 149 | S&F LED Tube light fitting batten type 20W, 230W, efficiency 120 Lumens per watt, colour temperature6500k (Cool White), Power factor grater than 0.9, Polycarbonate body, CRI 80, IP Rating, IP 20, THDv with in 5 % and THDi (8-10%) and integrated Electronic driver complete with al accessories internally Pre-wired and including connecting with 3 Core twisted flexible copper conductor cable of suitable size from celling rose, complete all as specified and as directed.Notes:- (i) The rate of three core twisted flexible copper conductor cable of suitable size for connection is included in this item and noting shall be paid extra on this account.(ii) Warranty for replacement of each LED lite fitting shall not be less than 2 years from the date of purchase.(iii) Date of purchase shall be marked on each fixture with permanent marker for redeeming warranty benefits. |
| 150 | S&F LED Tube light fitting batten type 10W, 230W, efficiency 120 Lumens per watt, colour temperature6500k (Cool White), Power factor grater than 0.9, Polycarbonate body, CRI 80, IP Rating, IP 20, THDv with in 5 % and THDi (8-10%) complete with all accessories internally Pre-wired and including connecting Up with 3 Core twisted flexible copper conductor cable of suitable size from celling rose, complete all as specified and directed.Notes:- (i) The rate of three core twisted flexible copper conductor cable of suitable size for connection is included in this item and noting shall be paid extra on this account.(ii) Warranty for replacement of each LED lite fitting shall not be less than 2 years from the date of purchase.(iii) Date of purchase shall be marked on each fixture with permanent marker for redeeming warranty benefits. |
| 151 | Supply and fixLED bulkhead luminaire 10W in die-cast aluminium alloy/ PVC body heat resistant prismatic glass cover, with specially designed gasket for minimum IP 55 degree of protection complete all as specified and as directed by Engineer-in-Charge. |
| 152 | Supply and fixLED building security light fitting 35 watts, Luman efficacy of LED 140 lm/W, PF>0.95 THD<10%, colour temperature 6500K CRI > 7, system luman not less then 2600 lm, made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens with toughed glass having bottom separate driver compartment with IP 65 protection and impact resistant of IK 07 etc and all accessories previewed complete including mounting bracket of GI Pipe 40mm inner dia light grade of reqd length and shape including bending, forging or welding etc and suitable bolts and nuts with washers, including connecting with PVC insulated multistandered cooper flexible cable of size 0.5sqmm 3 core form celling rose to fitting complete all as specified and as directed. Notes:- (i) The rate of three core twisted flexible copper conductor cable of suitable size for connection is included in this item and noting shall be paid extra on this account.(ii) Warranty for replacement of each LED lite fitting shall not be less than 2 years from the date of purchase.(iii) Date of purchase shall be marked on each fixture with permanent marker for redeeming warranty benefits. |
| 153 | Supply and fixElectric Water Heater storage type, vertical, 25 Ltrs capacity, 5 Star rated, with heating element, PUF insulation, multifunction safety valve, adjustable knob for temperature setting and Strainless steel inner tank and outer body suitable for operating on 230V, 50 Hz, single phase AC supply including hot & cold water PVC connections and mounting on wall with suitable size & No. of anchor bolts complete all as specified and as directed. Note: Old and new Geyser as retrieved will be taken on Geyser ledger and should be submitted at the time of final bill. |
| 154 | Supply and fix modular MCB protected plug and socket board in sheet steel enclosure with 20A rated mini MCB and 20A rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board and making good with cement plaster, putty and paint to match with the existing surface complete all as specified and as directed by Engineer-in-Charge. |
| 155 | S&F of ceiling fans complete with blades, down rods, (with remote) and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM, Five star rated with brushless direct current motor (BLDC)including connection with 1.5 sqmm, three core copper wire from ceiling rose complete all as specified and as directed by Engineer-in-Charge. Note: Old and new Ceiling fan as retrieved will be taken on ceiling fan ledger and should be submitted at the time of final bill. |
| 156 | Supply and fix of exhaust fan with steel body 300mm sweep with blade , with louvers shutter, voltage 230V, 50HZ, RPM 1200, Copper winding including connection with 1.5 sqmm, three core copper wire from ceiling rose to exhaust fan upto 1 mtr length including fixing on ventilator complete all as specified and as directed by Engr-In-Charge.Note: Old and new exhaust fan as retrieved will be taken on exhaust fan ledger and should be submitted at the time of final bill. |
| 157 | Taking down unserviceavle VTPN/ TPN DB with MCB\"s of any make/capacity complete all as specified and as directed by Engr-in-Charge. |
| 158 | S&F of MCCB / MCB distribution board, Vertical TPN, 4 way, 415 V, 3 phase, AC with MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface complete all as specified and as directed.Note: MCCB / MCBs shall be measured and paid separately. |
| 159 | Taking down unserviceable Sheet metal box & MCB DB SPN with MCB\"s of any make/capacity complete all as specified and as directed by Engr-in-Charge. |
| 160 | Supply and fix MCB distribution board, SPN, 12way 230 Volt in sheet steel powder painted enclosure double door type withIP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface complete all as specified and as directed by Engineer-in-Charge.Note:MCBs shall be measured and paid separately. |
| 161 | S&Fof MCB 100A, 10 KA, TPN, 415 V, 50 Hz complete all as specified and as directed. |
| 162 | S&F MCB SPN 40-63 Amp, 240 V with breaking capacity 10 KA,\"C\" series complete all as specified and as directed. |
| 163 | S&F MCB SP 6-32 Amp, 240 V with breaking capacity 10 KA, \"C\" series complete all as specified and as directed. |
| 164 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall PVC sheathed, 35 sq mm 4 core ISI Marked as per IS 7098(Part 1) including connecting on LT panel based with suitable lugs, glands etc including taking down existing cable of any description complete all as specified and as directed. |
| 165 | Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etcfor protection of LT cable XLPE grade 1100 volts complete all as specified and as directed by Engineer-in-Charge. |
| 166 | Taking down old U/S earthing and M&L for Earthing complete with galvanised iron earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connecting to GI wire 4 dia mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth wire protected by 15mm dia GI pipe medium grade and connected to distribution board/earthing test point all as shown in electircal plate No. 3 of SSR Part-I(2009) and testing on completion complete all as specified and as directed. Note :- The unit rate quoted shall also include for excavation, earth work in any type of soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bras @ 150mm C/C both ways, GI funnel with watering pipe, wire mesh,protection pipe, earth wire upto 7.50m long complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub heading earthing, specified in SSR Part II. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
