|
| 1 | M&L cement concrete type B-2 1:2:4 using 40 mm graded stone aggregate as in foundation filling and like embedding posts complete all as specified and directed. |
| 2 | M/L rendering 15 mm thick on brickMasonry surface or other than fair surface of bricksurface,concrete surface in CM (1:4) to be finished even & fair without using extra cement complete all as specified and directed. |
| 3 | Supply and Fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roofcovering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 4 | Supply and Fix Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roofcovering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 5 | S&F for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors;posts, fixed with angle cleats or other connecting plates Fe 410 -W (GdeE- 250) quality A complete all as specified and directed. |
| 6 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-410-W(Gde E-250) quality Ball complete all as specified and directed. |
| 7 | M & L for preparation of new steel Surfaces and applying two coats of synthetic enamel paint over a coat of red oxide on surfacess of any discription, over 10cm in width or girth complete all as specified and directed. |
| 8 | Formwork to sides of Flat concrete bases surface of Rost/Pillars and similar work, vertical or to better and fair finished surfaces complete all as specified and directed. |
| 9 | Supply and fix uPVC box type rain water gutter pipes of width 160mm, depth 100mm, having thickness of minimum 3mm (4kg/sqcm guage) with added rib for extra strength, fixed in position with uPVC clamps and mild steel bands, straps, supports or stays, including uPVC gutter fittings like couplings,runningoutlet,corner / elbows (of desired degree), end drops, end caps, corner drop/elbow drop, leaf guard, etc all complete as specified and directed.Note:- Rates for uPVC fittings to be used like centre drop, end drop, elbow drop, MS bends, stays and straps etc to be deemed included with the quoted rates of the contractor. |
| 10 | Supply and fix uPVC square/rectangular/circular type rain water pipes of 90mm or above, having thickness of minimum 3mm (4kg/sqcm guage) fixed in position with uPVC clamps and mild steel bands, straps, supports or stays, including all uPVC fittings necessary like couplings, elbows, end caps,etc all complete as specified and directed.Note:- Rates for uPVC fittings to be used like centre drop, end drop, elbow drop, MS bends, stays and straps etc to be deemed included with the quoted rates of the contractor. |
| 11 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing) complete all as specified and directed. |
| 12 | M&L for Endura Industrial tiles or its equivalent 12 mm thick (square/rectangular) area of each tiles exceeding 0.09 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured to match including 20 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 13 | M&L cement concrete type B1 1:2:4 using 20mm graded stone aggregate 25mm thick as in flooring etc complete all as specified and directed. |
| 14 | Demolition of cement concrete in below or above ground floor and paving n.exc 15 cm thk (unreinforced) for plinth protection,sub base and foot path complete all as specified and directed. |
| 15 | Demolition of reinforced cement concrete inConcrete in ground floors andpavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 16 | M & L For RCC 1:2:4 Type B1, using 20mm graded aggregateSlabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the likeincluding demolition of old slab any description complete all as specified and directed. |
| 17 | S & F TMT bars 10 mm dia and over, cut to length, bend to shape incl cranking, hooping etc. and binding with ms wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 18 | Material and labour 3mm thick coloured cement mortar 1:2 over concrete floors for finish including polishing complete all as specified and directed. |
