|
| 1 | Removing existing water proofing treatment by brushing with wire brush, cleaning of terracing by taking down cement concrete, existing plaster lime coba 80 to 100mm thick mud phuska/cement concrete/lime coba etc, cleaning of all foreign material such as fungus mass dust etc, roughing surface of corner to roof by wire brush and removing material from site complete all as specified and as directed. |
| 2 | Demolition of cement concrete (unreinforced) in any description and in any position not other wise specifically provided for complete all as specified at site. |
| 3 | Demolition ofBrickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articlesl etc complete. |
| 4 | M&L old size brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and as directed. |
| 5 | Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc. |
| 6 | M&L for rendering 15mm thick on faces of brick work or concrete surfacesCM 1:6, and finishing the surface even and smooth without using extra cement completeall as specified and directed. |
| 7 | M&L rendering 5mm thick in cement mortar 1:4 on ceiling surface and finished even and smooth with out using extra cment |
| 8 | Taking down 15 mm bore steel tubing and connection including cleaning and refixing or removal to store etc complete. |
| 9 | Taking down 20 mm bore steel tubing and connection including cleaning and refixing or removal to store etc complete. |
| 10 | S&F 15 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete. |
| 11 | S&F 20 mm bore galvanised mild steel tubing of medium grade with all fittings & fixed complete to walls & ceiling or laid in trenches/floors etc complete. |
| 12 | Demolition of RCC water storage tank of size exc. 600x1200x1000 mm but n.exc 1200x1600x1500mm on roof, floor, staging complete and the scrap should be removing to distance of 50m where directed by EIC. |
| 13 | S&F 500 ltr in triple layer white colour ISO approved rotational moulded polyethylene cylindrical vertical with closed top water storage tank with tank adaptor at Inlet & outlet including 20mm ball valve hoisted and fixed in position on new or existing foundation complete all as specified and as directed. |
| 14 | S & F20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 15 | S&F in repairs vitreous china squatting pan \"ORISSA PATTERN\" size 580mm x 440mm \"white with integral foot rest (excluding flushing cistern and flush pipe ) with \"P\" or \"S\" trap, front or back inlet including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed |
| 16 | S&F in repair vitreous china wash handbasin, white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets 32mm dia brass waste coupling and including fixing of tap waste fitting and union complete all as specified and as directed. |
| 17 | Suppy only 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 18 | S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and as directed |
| 19 | S&F PVC connection 15mm dia with Brass nuts of length 450mm etc complete. |
| 20 | S&F brass CP mixer (Wall/Sink/Pillar) fency type 15mm dia bore mixing hot & cold water for wash hand basin screwed down for iron pipe and fixed. |
| 21 | S&F in repair of CP two way bib cock & angle cock, 15 mm dia with wall flange, ISI Marked, complete all as specified and as directed. |
| 22 | S&F in repair 15 mm bore angle cock long threadfancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete. |
| 23 | S&F in repair 125 mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing of steel pipe or union. |
| 24 | S&F in repair 15 mm bore bib taps long bodychromium plated fancy type, cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe or for unions and fixed 15 mm boreetc complete. |
| 25 | S&F in repair of CP health faucet with 8 mm dia, 1.5 mtr long flexible tube & wall hook, made of cast copper alloy, complete all as specified and as directed. |
| 26 | S&F in repair 600mm CP towel rail \"D\" type fixed to wall with CP brass screws complete all as specified and as directed. |
| 27 | Taking down and breaking up PVC drain pipes set in cement mortar in floors or wall in 110/75mm dia meter complete all as specified and as directed |
| 28 | S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with clamp out of 25x3mm flate Iron including bolts and nuts fixed with MS fastener 110mm bore complete all as specified and as directed |
| 29 | S&F PVC (SWR) bends any radius 110mm bore complete all as specified and as directed |
| 30 | S&F Cast iron Soil, waste and vent spun pipes , in any length with or without ears, with cement joints, fixed to wall 75mm bore including fixing of necessery clamp and taking down old PVC /CI/Concrete pipe. |
| 31 | S&F Cast iron Soil, waste and vent spun pipes , in any length with or without ears, with cement joints, fixed to wall 100mm bore including fixing of necessery clamp and taking down old PVC /CI/Concrete pipe. |
| 32 | S&F Cast iron bends any radious 75mm bore. |
| 33 | S&F Cast iron bends any radious 100mm bore. |
| 34 | S&F Cast iron branch pieces, single( equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 75mm bore of pipe. |
| 35 | S&F Cast iron branch pieces, single( equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches 100mm bore of pipe. |
| 36 | S&F 75mm bore CI floor trap. |
| 37 | S&F 100 mm bore CI floor trap. |
| 38 | S&F Cast iron cowl 100mm bore. |
| 39 | S&F MS powder coated peg set of Six fixing with wall complete all as specified and as directed |
| 40 | S&F in repairs sink with drainage board made up of stainless steel 1mm thick for kitchen or laboratory with plug washers and waste fittings including bedding in CM 1:3 into dwarf wall or cantilever brackets and connecting union to pipe over all size 915mm x 460mm, bowl size 410 x 330 x 160mm etc complete all as specified and as directed by Engineer-in-Charge |
| 41 | S&F wall mounted stainless steel Kitchen plate rack (utensils) over all size 750 x 900 X 250mm made with 0.63mm thick SS sheet including necessary stainless steel nuts and bolts complete all as specified and as directed. |
| 42 | M&L for complete removal of existing treament by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit and preparing surfaces of wall and applying Two or more coats on old surface of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over 1mm thick wall putty (for external suface) complete all as specified and as directed. |
| 43 | M&L for preparing old decorateed ceiling surface and applying one coat of OBD all as specified and as directed. |
| 44 | M&L for preparation of old treated surface and applying one coat of OBD over a coat of alkali resistant primer over one coat of putty on wall complete all as specified and as directed. |
| 45 | M&L for preparation new wooden surface of any description not otherwise described over 10 cm width or girth and applying two coat synthetic enamel paint over one coat of pink primer etc complete all as specified and as directed. |
| 46 | M&L, preparing for new steel surfaces and applying two coats of synthetic enamel paint over one coat of primer 10 cm width or girth complete all as specified and as directed. |
| 47 | Dismantling floor hearth wall tiling including cement mortar bedding but not backing removing serviceable meterial to store |
| 48 | M&L for coloured joint free ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurryand pointed in white or coloured cement to match to floor, over and including 15mm thick screed bed or bedding layer in cementy mortar 1:6,etc complete. |
| 49 | M&L non skid ceramic colour tiles 400x400 7 to 8 mm thick(square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in colour cement to match as in floor including 15mm thick cement mortar screed bed 1:4 complete all as specified and as directed |
| 50 | M&L for glazedcoloured ceramic tiles 300x600x7mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match the existing wall surfaces, over and incl 10mm thick rendering in cement mortar 1:4 etc complete. |
| 51 | Dismantling of stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floor,wall, aprons etc complete all as specified and as directed. |
| 52 | M&L for machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, over and including 15mm thick screed bed or bedding layer in cement mortar 1:6,etc complete. |
| 53 | M&L for 16-18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone including cutting andpolishing types over 15 mm thick in CM(1:6) etc complete. |
| 54 | M&L 35-40mm thick Rough dressed stone slab flooring, laid dry but jointed & pointed in CM(1:3) |
| 55 | Rounding to edges of stone slabs one edge, such as in stair steps, cooking platform, and other similar situations etc complete. |
| 56 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each etc complete. Note: Including cutting of hole as required at site for taking down and making good of disturbed portion with brick work of CM 1:6 or PCC 1:2:4. |
| 57 | -do- but exc 1.5 Sqm and n exc 4 sqm each. |
| 58 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to thestiles & rails with suitable PVC sheet beading, and joined together with solvent cementall as directed and specified by Engineer-in-Charge. |
| 59 | S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube etc complete. |
| 60 | S&F 125 mm x 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate ect including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4type B1 using 20mm graded stone aggregate complete all as specified and as directed.Note :- 10 mm deformed bar shall be provided in bottom & PCC will be provided in hollowframe in same rate. |
| 61 | S&F 105 mm x 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate ect including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4type B1 using 20mm graded stone aggregate complete all as specified and as directed.Note :- 10 mm deformed bar shall be provided in bottom & PCC will be provided in hollowframe in same rate. |
| 62 | S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete. |
| 63 | S&F 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a),divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete. |
| 64 | S&F butt hinges extruded aluminium alloy with galvanised mild steel hing pin, anodised and fixed, type C-21 100 mm size with PVC doors etc complete. |
| 65 | S&F butt hinges medium weight cold rolled, mild steel and fixed 75 mm size etc complete. |
| 66 | S&F aluminium anodised barrel tower bolts of extruded section and fixed fixed 200 mm long etc complete. |
| 67 | S&F aluminum handles cast type anodized 150 mm size etc complete. |
| 68 | S&F mild steel, 300 mm ordinary door spring including roller and roller plate etc complete. |
| 69 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy. |
| 70 | S&F 1.25 mm thick mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc complete all as specified and as directed |
| 71 | S&F of framed work as in doors or gates of angle or other section with gusset plates, rails,braces,etc.,complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of Fe-410-W (Gde-E-250). |
| 72 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. |
| 73 | S&F 2nd class hardwood Plain, solid, straight, chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints. |
| 74 | S&F 18/19mm thick WPC board, prelaminated both face with decorative choice laminations one side and other side balancing white, fixed with screws to timber frame work including beading on cutting /exposed edges, complete as in palmate boxes and kitchen cabinet and cupboard or in any type complete all as directed.Make : Rajshri /Black Cobra |
| 75 | S&F Hasp & staple safety type aluminium anodized with mild steel hing pin incl bolt to hing plate and fixed with screws 100mm size etc complete. |
| 76 | S&F Continuous (piano) hinges, mild steel bright finish electrogalvanised 20mm width of flap etc complete. |
| 77 | S&F 100 mm SS cupboard handle complete all as directed. |
| 78 | S&F soft closing hinges at 110 degree for kitchen cabinet shutters, Make- KAFF |
| 79 | M&L for 50 micron powder coated aluminium sliding window shutters (shutters to be slide in suitable track system) (three panel shutter ) fabricated out of section for outer frame having weight not less then 1.17kg/Rm, sliding window shutters (02 Nos glazed & 01 gauzed) formade of sectionsall roundhavingweight not less than 0.42 kg/Rm top rail , bottom rail and verticle styles and midlle rail of shutter having weight not less then 0.368 kg/Rm, including 3.5 mm thick plain selected quality glass stainless steel wire cloth 0.36 mm dia steel wire and apperture 1.40 mm including providingpowder coated aluminium handle , cleats and glazing clip special and suitable auto lock system , rubber gasket etc complete all as specified and as directed. |
| 80 | M&L for 50 micron powder coated aluminium glazed window shutters (One No glazed & One gauzed) side hung type, including fabricated out frame work of required size and frame having weight not less then 0.667kg/Rm without sash bars made of shutter sections weighing 0.55 kg/m including providingnecessary powder coated aluminium fittings joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type C-21 100mm long (2 no.) aluminiumhandle (1 no.) per shutter etc including 3.5 mm thick plain selected quality glass, stainless steel wire cloth 0.36 mm dia steel wire and apperture 1.40 mm and shutter providedetc complete and as directed. |
| 81 | M&L for 50 micron powder coated aluminium glazed ventilator fixed/openable type, without sash bars usingapproved powder coated aluminium sections weighing 0.55 kg/m etc including 3.5 mm thick selected quality figured glass complete all as specified and as directed. |
| 82 | S&F framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders ; framed balusters; walk ways; railings; framework of watertanks and similar work conforming to Fe 290. Gde-E-165. |
| 83 | M&L for Hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface |
| 84 | M&L for 75mm thick cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in plinth protection /path finished even and smooth without using extra cement complete all as specified and as directed. |
| 85 | Surface excavation n. exc 30cm deep and averaging 15cm deep and getting out in soft/loo-se soil. |
| 86 | M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in filling & mass concrete in poles, floor and sunken portion complete all as specified and as directed by Engineer -in-charge. |
| 87 | M&L for 60mm thick factory made (best locally available) chamfered edge cement concrete paver block of M-40 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU Mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; |
| 88 | M&L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed. |
| 89 | M&L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in copping or roof kerbs on roof chamfered on edge including troweling slightly complete all as specified and as directed. |
| 90 | M&L 10 mm thick rendering in cement mortar 1:3 on concrete surfaces when concrete is stilgreen finished even and fair including mixing of liqued water proofing compound as per manufacturer instruction etc complete all as specified and as directed. |
| 91 | M&L one coat of bituminous based primer conforming to IS-3384-1965 @ 0.3 Kg/Sqm to be applied on prepared surface, till the surface is properly impregnated. |
| 92 | S&F APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. |
| 93 | M&L for toping layer of precast machine pressed cement concrete tiles of size 25cm x 25cm x 22 mm thick conforming to IS : 1237-1980 shall be laid in neat cement slurry over and including 15 mm thick cement mortar screed in 1:4 and joints between the tiles to be filled with chemical like Tile grout or equilent complete all as specified and as directed. |
| 94 | M&L for rendering 15mm thick in cement mortar 1:3 incliding mixing of liqued water proofing compound as per manufacturer instructions surfaces finished even and smooth without using extra cement for sunken floor complete all as specified and as directed |
| 95 | M&L for applying two coats of spray/brush applied of Smart Care Ultron Liquid membrane of Asian pant Ltd or equivalent as approved by GE in proportions as per manufacturer instruction complete on surfaces floor and wall of sunken portion complete all as specified and as directed. |
| 96 | M&L for plain cement concrete 1:5:10 type D-2 (using 40mm graded stone aggregate / bricks bats) as in filling & mass concrete in poles, floor and sunken portion complete all as specified and as directed by Engineer -in-charge. |
| 97 | S&F Stainless steel curtain rod 25mm dia grading with fancy knob type ends and brackets complete all as specified and as directed by the Engineer-in-charge. |
| 98 | S&F of door seal 45 to 50 mm wide and 4-5 mm thick fixed to doors shutter with screws, complete all as specified and as directed. |
| 99 | S&F of Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 and all as directed by engineer in charge. |
| 100 | S&F Pre-painted galvatume aluminum zinc coating AZ-150, GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 101 | M& L for precast RCC Cover Slab, 1:2:4 type B 1 using 20 mm graded stone aggregate as in manhole cover slabs including necessary form work etc. set in CM 1:6 complete Note :- reinforcement shall be measured and paid separately. |
| 102 | S&F for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete, all specified and directed. |
| 103 | Demolition and breaking drain pipe (salt glazed stoneware) set in cement mortar including packing under and haunching against side of pipe for 150 mm Internal dia of pipe complete all as specified and as directed |
| 104 | Concrete bed to drain pipes 200 mm including packing under, and haunching againstthe sides of pipes after they are laid and tested; in cement concrete 1:4:8 complete all as specified and as directed |
| 105 | M&L Salt glazed stone ware (SGSW) grade \"A\" pipe 200mm bore laid and jointed on concrete bed complete including testing all as specified. |
| 106 | Excavation in trenches for fdn n.exc 1.5m wide and n.exc 1.5m in depth & getting out in soft /loose soil complete all as specified and as directed. |
| 107 | Excavationin trenches in soft/loose soil exc 1.5 mtr in depth for laying of pipe/ cables/ poles etc and getting out complete all as specified and as directed. |
| 108 | Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm complete all as specified and as directed |
| 109 | Removing excavated at a level n.exc 50m m above the starting point complete all as specified and as directed |
| 110 | M&L surface dressing nexc 15 cm deep, site clearance, to remove the bushes and making area workable complete all as specified and directed. |
| 111 | Excavation in post holes (or similar holes) each n. exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n. exc 50m and making good surface in soft/loose soil. |
| 112 | M &L for hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified & directed. |
| 113 | M&LBands, straps, supports or stays for rainwater, ventilating pipes, including bolts,if required: hooks (stay),heavy,for large gates; hook and pintle hinges: large hasps and staples |
| 114 | M&L cement concrete type C-1, 1:3:6 ,(using 20mm gradedstone aggregate) as in foundation, filling and mass concrete including form work for poles all as specified and as directed by Engr-in-Charge. |
| 115 | Supply only Chain link fencing incl line wires, any mesh, size and type to any standarards, rails straining bolts etc incl provn of binding wire. |
| 116 | Fixing only of Chain link fencing incl line wires, any mesh, size and type to any standarards, rails straining bolts etc incl provn of binding wire. |
| 117 | S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc as directed |
| 118 | S & F framed work such as grills, gratings, door etc with ends of bars shouldered and/riveted or forged into spikes; framed guard bars; barren iron doors; ladders; framed balusters,walk ways; railings and similar work incl cattle trap confirming to Fe.290.Gde-E-165. |
| 119 | Taking down carefully copper/ aluminium point wiring (light, fan, socket, or power) complete fitting such as switches, ceiling roses pendants, regulators, sockets, light fitting ceiling fan etc to be measured seperately ) removing materials for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperatly) and making good disturbed surface of walls floors etc all as specified and directed. Note-Responsibility after taking down fan/exhaust fan keep in safe custody of contractor and refix the same afterbefore completion of work the rate of same deemed to be included in the item quoated rate. |
| 120 | Taking down carefullyexisting wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size anycapacity fromboards completeall as specified and as directed. |
| 121 | Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed. |
| 122 | M & L for concealed modularpoint wiring complete with PVC insulated and unsheathed flame retardant low smoke and halogen ( FRLSH ) cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 20 mm dia, clip, with MS terminal boxes suitable for modular wiring (not less than 1.6mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dollywithmodular cover plate of suitable size of approved make and colour including 1.5 sqmm green multi stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed for the following :- |
| 123 | (a) One light point controlled by one switch |
| 124 | (b) one Fan/Exhaust point controlled by one switch & regulator. |
| 125 | (c) One 3/5 pin5 Amp socket outlet point controlled by one switch on independent board. |
| 126 | (d) One 3/5 pin5 Amp socket outlet point controlled by one switch on same board. |
| 127 | (e)one bell/buzzer point controlled by one switch |
| 128 | S&F modular socket 20 amp with MCB 20 Amp \"C\" type all specified and complete. (For geyser) |
| 129 | Description all as per item No 124 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLSH ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 2.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed. |
| 130 | S&F modular switch single pole one waycomplete all as specified and asdirected. |
| 131 | S&F modular bell push , piano type 6 amp SP one way |
| 132 | S&F modular socket outlet 2in1, 3 pin, 5 Amp 2 module complete all as specified and asdirected. |
| 133 | S&F modular switch 15 Amp single pole one way complete all as specified and asdirected. |
| 134 | S&F modular socket outlet2in1, 3 pin, 5 Amp and 15 Amp 2 module complete all as specified and asdirected. |
| 135 | S & F modular Fan Regulator electronic rotary, step type 240 Volt50 Hz,complete all as specified as directed. |
| 136 | S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittingscomplete all as specified as directed |
| 137 | S & F 9W/10W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. |
| 138 | S&F electric bell, AC 230 volt, single pole, ding dong type including bell push complete all as specified |
| 139 | S&F ceiling rose,surface POLYCARBONATE 63 x50mm three terminals completeall as specified and asdirected. |
| 140 | M&L, sub main wiringwith two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and includingnon metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and as directed.(NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chasesin wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface. |
| 141 | S&F TPN DB-DPX 125 MCCB DBs 4 way single door with provision for DPX 125 MCCB andas incomer and SP/TP MCBs as out going no of modules DPX 125+12, concealed Complete all as specified and as directed. Make:- ABB / Havells / HPL / Standard. |
| 142 | Supply and fix MCCB having breaking capacity of of 16 KA 415V, 4 pole having rating capacity of 63 Amp 100% ICU complete all as specified and as directed. |
| 143 | S&F sheet metal enclosure double doorconcealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar SPN DB 8 ways 240 V complete all as specified and as directed . |
| 144 | S&F MCB single pole and neutral 40 Amp/63 Amp 240 V ,10KA , \"C\" series, complete all as specified and as directed with copper lugs |
| 145 | S&F MCB single pole 6 to 32Amps 240 V,10KA, \"C\" series,complete all as specified and as directed |
| 146 | Supply and fixing22 W LED 6000k Decorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 28watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and as directed. |
| 147 | Supply and fix LED 35W building security light fitting,5700 K energy saving & environmental friendly long life versatile pressure die cast aluminiumIP 66.road way luminare with high power LEDs as light source and electronic driver suitable for pole dia 35 mm including 35 mm dia light grade tube bracket ,bend to shape 1.80 mtrlength with two nos of clamps of size 50mm x 6mm with nuts and bolts,washers etcincluding connection with 1.5sqmm threesinglecorePVC insulated and PVC sheathed cable stranded copper cable upto ceiling rose and fixing on walls/pole complete all as specified and as directed. Make:bajajcat part no BRLEP20WLEDWH or equivelent ofphilips/Havells /CG |
| 148 | Supply and laying or fixing or passing through HDPE pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel or strip and overall PVC sheathed, 25 sq mm 4 core ISI Marked as per IS 7098(Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc including taking down. complete all as specified and as directed. |
| 149 | Supply and Fixing Exhaust fans AC single phase 230/240V of size 300 mm sweep, 1250-1350 RPM with louvre complete including with all arrangement of making holes on wall, making good and finishing of disturbed surfaces matching with the existing surfaces, necessary fixing arrangement such as fastener bolts, nuts, washers etc, of appropriate size all as specified and as directed |
| 150 | S&F BLDC Ceiling fan complete with three aluminium blades down rod, snackel clamp, reel insulator, fan canopy split pin and accessories 230 V, 1200mm sweep with service value not less than 7.8, power consumption not more than 28 watt and minimum air delivery of 220 CMM, BEE 5 star rated, two core PVC insulated copper wire white sheathed of size 0.5 sqmm from fan connector to ceiling rose complete all as specified and as directed. NOTE:-(I) Writing MES no in 20mm letter size with black paint etc is deemed to be included in quoted rate. (ii) Old fan deposit in store yard. |
| 151 | Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etcfor protection of LT cable XLPE grade 1100 volts complete all as specified and as directed by Engineer-in-Charge. |
| 152 | Material and labour for Double wall corrugated HDPE pipe,PN-10 ISI marked of outer dia 90 mm, inner dia75 mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etcfor protection of LT cable XLPE grade 1100 volts including taking down of u/s existing HDPE pipes complete all as specified and directed by Engineer-in-Charge. |
| 153 | M&L pipe galvanised iron of size 50 mm dia, light grade ISI marked, complete with fittings laid in trenches/ fixed with poles etc as protection to cables including taking down of u/s existing GI pipes complete all as specified and as directed by Engineer in Charge |
| 154 | M&L for earthing completewith galvanisedsteelearth plateelectrode of size 600 mm x 600 mm x 6 mm thickweithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade)and watering pipe 20 mm bore GI pipe(light grade) andchamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg.50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and saltcomplete and earth leadconnected to earthing test point (up to main switches, DBs) completeall as specified &testing on completion. NOTE:-(I)item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii)PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra costof additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate. |
| 155 | Supply, erecting and fixing in true vertical position, steel tubular swaged pole (410 SP-31) 9.0 mtr long, complete with cast iron base plate, pole cap / finial taper plug, bolts, nuts and washers, welded reduced section and longitudinal weld throughout entire length of pole including 2 coats of black bituminous paint externally upto planting depth and remaining exterior portion of pole shall be provided withtwo coats of aluminium paint overone coat of red oxide primer and incl taking down existing old unserviceable poles complete all as specified and directed. (Numbering of the poles shall be done with synthetic enameled painted letter of shape & size as directed.) Note :- Excavation incl earth work and PCC foundation will be measured and paid separately. |
| 156 | S & F of GI brackets for street light fitting fabricated with GI tubing 32 mm dia for LED Street lights medium grade 1.2 mtr length and bending to angle of 120 degree incl mild steel flat iron clamp fabricated with mild steel flat iron 32 x 5 mm with nut, bolt & washers suitable for fixing of GI bracket including taking down of u/s existing GI bracket complete all as specified and directed. |
| 157 | S&F in replacement of new generation energy saving and environmental friendly long life LED street light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 70 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) with surge protected deviceincluding pvc coatedtwisted copper cable 1.5 sqmm 3 core through copper connectors from junction box (Pole box) to security lights complete all as specified and directed. Make - Bajaj/Havells/wipro/Benlo |
| 158 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete all as specified and as directed. |
