Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete of any description and in any position (un-reinforced) in ground floors and paving not exceeding 15cm thick (below or above GL) complete all as specified and as directed. Note: Demolished material through out of MoD Land rate included above item. |
| 2 | Dismantling floor, hearth or wall tilingof any description and in any positionincluding cement mortarbedding (but not backing) complete all as specified and as directed. |
| 3 | Dismantiling of stone slabs and tiles of any description or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and as directed. |
| 4 | M&L for vitrified, coloured and printed tiles oflight shade, 8 to 10 mm thick (Square / Rectangular ) polished area of each tiles not exceeding 0.36 sqm as in flooring over and including 15 mm thick cement screed in (1:6) CM set and jointed in neat cement slurryand pointed in white or coloured cement to match with the colour of tiles complete all as specified and as directed. |
| 5 | M&L for vitrified, coloured and printedtiles of width as directed and8 to 9 mm thick as in skirtingfixed over and including 10 mm thick cement screed in (1:4) CM set and jointed in neat cement slurryand pointed in white or coloured cement to match with the colour of tiles complete all as specified and as directed. |
| 6 | M&L for Non skid ceramic coloured tiles7 to 8 mm thick (Square or rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and including 15 mm thick cement screed in (1:6) CM set and jointed in neat cement slurryand pointed in white or coloured cement to match with the colour of tiles complete all as specified and as directed. |
| 7 | M&L for glazed cearmic tiles, coloured tiles 450x350x 7 to 8 mm thickon vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:4)completeall as specified and directed. |
| 8 | M&L for machine cut Kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing, over and including screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:6 ) complete all as specified and as directed. |
| 9 | M&L for machine cut kota stone slab 20 - 25 mm thick as in riser / steps, skirting, dado,cills and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing over and including 10 mm thick backing coat in CM (1:4) complete all as specified and as directed. |
| 10 | M&L for Granite slab18 to 20 mm thick machine cut, bedded and joined withcementand pointed with white cement (1:2) using marble dust with admixture of pigment to match over and including 20 mm thick screed bedCM (1:3) the shade of granite stone including cutting and polishing type as incill and jamb/skirting, steps cooking plateforms includigng rounding off the exposed edges and polishing all asspecified and directed. |
| 11 | M&L for PCC (1:3:6) Type C2using 40mm graded stone aggregate, 50mm thickas in plinth protection/floor finishes surface even and fair without using extra cement complete all as specified and as directed |
| 12 | Applying the non shrink high mechanical strength properties epoxy based mortar @ 5kg/RM on all corner joints of wall, chajja, facade any other similar places to prevent the capillary formation from wall to roof area; by three component system comprising of base, hardener and quartz filler havingER Base and Hardener with Quartz filler etc complete all as specified and as directed |
| 13 | Taking down of old roof treatment of any description including mud phushka, concrete padding, tiles, cement plaster from roof surfaces (of any thickness) etc including cleaning, brushing and watering to joints and grooves and throwing the same to a distance exc. 250 mtr and not exc 500 mtr from the roof etc complete all as specified and as directed. |
| 14 | M&L for Plain cementConcrete type B-0 1:2:4 ( 12.5 mm graded aggregate) 25mm thick average as in roof padding/ levelling finish even and smoothetc complete all as specified and as directed. |
| 15 | M&L for Providing cement concrete type B1 1:2:4 using 20 mm graded aggregate in roof kerbs or mud stops, rounded or chamfered on edges or water tank staging, coping etc finished even and smooth complete all as specified and as directed. |
| 16 | M & L for applying Smartcare Damp proof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. (i) Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof: water) and other coats to be applied undiluted. (ii) The undiluted 2nd & 3rd coatings needs to be reinforced with 40 GSM geotextile to be sandwiched between them. (iii) After that final 4th coating shall be applied.The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. Make: SmartCare Damp Proof of Asian Paints or equivalent in Berger and Nerolac.Notes:-(a) The work shall be executed through authorised applicator of manufacturer only.(b) Authrised Applicator shall be approved by GE before starting of work.(c) All materials shall be procured directly form manufacturer.(d) The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of GE. |
| 17 | Demolition of brick work /stone work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed. |
| 18 | M&L for Brick work with sub class B bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6).complete all as specified and as directed. |
| 19 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius inhalf brick thick walls built in cement mortar (1:4).complete all as specified and as directed. |
| 20 | M&L for PCC type B-1 (1:2:4) using 20mm graded stone aggregate as in coping, in lintels upto1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, staging, slightly rounded or chamfered on edges, angles, kerbs and throating in roof as directed complete all as specified and as directed by Engineer in charge. |
| 21 | Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed. Note: Demolished material through out of MoD Land rate included above item. |
| 22 | M&L for 12 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 23 | M&L for rendering 15mm thick in cement mortar 1:4on fair faces of brick work or concrete surfaces, mixed with water proofing compoundfinished even and smooth without using extra cementcomplete all as specified and as directed. Note : (i) The quoted rate is inclusive of necessary scaffolding works. (ii) WPC shall be measured and paid seperately. |
| 24 | M&L for 5mm thick rendering (1:3) on fair faces of brick work or concrete surfaces of ceiling/chajja/fascia etc finished even and smoth without using extre cement complete all as specified and as directed. |
| 25 | Supply only liquid water proofing compound @ 200 ml per 50 kg of cement. |
| 26 | M&L for preparation of new plastered surface of wall and applying two coats of oil bound distemper, over and incl a layer of2mm thick wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed. |
| 27 | M&L for preparation of new plastered surfaces of ceiling and applyingthree coats of white wash complete all as specified and as directed. |
| 28 | M&L for preparation of new plastered surfaces of wall and applyingtwo coats of cement base paint over a coat of primer complete, colour of paint as approved by Engr-in-charge, complete all as specified and as directed. |
| 29 | M&L for complete removal of existing treatment of plastered or unplastered surfaces walls andapplying two coat of oil bound distemper over a coat of 2mm thick wall care putty on walls complete all as specified and as directed by Engineer -in-Charge. |
| 30 | M&L for complete removal of existing treatment of plastered or unplastered surfaces of ceiling andapplying two coat of white wash complete all as specified and as directed by Engineer -in-Charge. |
| 31 | M&L for complete removal of existing treatment of plastered or unplastered surfaces of walls andapplying two coat of white wash complete all as specified and as directed by Engineer -in-Charge. |
| 32 | M&L for complete removal of existing treatmentof surfaces of walls of plastered or unplastered surfacesandapplying two coat of cement base paint complete all as specified and as directed by Engineer -in-Charge. |
| 33 | Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square metre each complete all as specified and as directed. |
| 34 | Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 sqm and not exc 4.00 sqm each complete all as specified and as directed. |
| 35 | Refixing in same opening including taking down shutters of any description exceeding 1.5 sqm and not exc 2.00 sqm each complete all as specified and as directed. Note :\"refixing\" includes taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc. |
| 36 | S&F Pressed steel frames 105x60mmfor doors with one or more rebates including necessary fixing lugs, hinges, lockstrike plate, etc. complete, as specified, supplied and fixed. |
| 37 | S&F Pressed steel frames 125x60mmfor doors with one or more rebates including necessary fixing lugs, hinges, lockstrike plate, etc. complete, as specified, supplied and fixed. |
| 38 | M&L for PCC 1:3:6 type C-0 (using 12.5 mm graded stone aggregate)for filling in hollow section of pressed steel frames and like complete all as specified and as directed. |
| 39 | S &F of 30mm thick Flush shutters, soild coreconstruction, with paticle board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 40 | S &F of 30mm thick Flush shutters, soild coreconstruction, with paticle board core and plywood face panels, commercial type, both faces are covered with decorative face veneer with lipping/frame to matchcomplete all as specified and as directed. |
| 41 | M & L for 35 mm thick glazed and skeleton factory made shutters of 2nd class Hard Wood, open rebated and prepare to receive glass, guage etc (without sash bars)but with edges of sash bars and framing moulded, fitted with moulded beads both sides for securing glass etc, size of members of shutters as specified complete all as specified and as directed. |
| 42 | S&F of solid PVC door frame of size50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specification & drawings complete all as specified and as directed. |
| 43 | All as per item No above but single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to matchwithprelam sheet complete all as specified and as directed. |
| 44 | S &F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 45 | All as per item No above but Single Side Prelam PVC sheet used instead of Plain colour PVC sheet and stile & rails having one side feathered edge and on other side 10mm 900 bent edge complete all as specified and as directed. |
| 46 | S & F of windows made of pre-painted steel (Base steel as per IS-513 of 0.58mm minimum thick \"D\" Quality galvanized as per IS-277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted as a polyster paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars / grills fly mesh shutter section should be of 20-40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap, Elixir or equivalent stay, handles 2 Nos of heavy-duty stainless steel pivot hinges be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and SS mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/ masonry wall by means of self-expanding, screws including 10mm sqaure guard bars with 6\" (152.4mm) pitch etc complete all as apecified and directed. Make : NCL ECO-4000 series windows. The quoted rate is inclusive of window, glass, SS wire mesh, grills and as specification as mentioned above. |
| 47 | M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 48 | M & L for Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 49 | S&F of Box type steel windows with side hung shutters (double shutters for glass and guaze) jointed together with an including grills using 10mm square bars @10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars dovetailed and welded incl filling of PCC 1:3:6 type C-0 (using 12.5 mm graded stone aggregate) in hollow section of frame complete all as specified and as directed. Note : Glass/guage shall be measured and paid separately under respective item. |
| 50 | S&F of Steel ventilator with top hung shutter including hinges, steel peg stay, complete |
| 51 | S&F of 3mm thickFigured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane, fixed to UPVC/aluminum or any kind of frame with and including suitablerubber beadingcomplete all as specified and as directed |
| 52 | S&F ofStainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete allas specified and directed. |
| 53 | M&L for two coats of DUCO spray paint of approved colour by compression machine to iron surfaces over a coat of red oxide primer of built in steel Almirah including loft inner & outer all sides inluding preparation of surfaces using mechanical means/hot air gun/sand blasting as directed by Engr-in-Charge for removal existing paint etc, removing dent, scrateches and including replacement of (all Stainless seel handles of grade 304 - 03, Godrej lock - 03 Nos, all SS hinges, SS hanger rod with hook-01 Nos) and including taking down of shutter and refixing after completion of repair/denting /replacement/painting work. (Size of steel almirah=1500 mmx1900 mm) complete all as specified and as directed. |
| 54 | M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 55 | M&L preperation of new wooden surface and applying two coat of synthetic enamel paint over a coat of pink primer onnew wooden surface any description not otherwise described over 10 cm width or girth and complete all as specified and as directed. |
| 56 | M&L for preparation of old steel surface by removing rust/existing old paint surfaces using sand paper/any other means completely of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed. |
| 57 | M&L preperation of old wooden surface by cleaning the surface free off grease, dust, etc and applying two coats of synthetic enamel paint over 10 cm width or girth and complete all as specified and as directed. |
| 58 | S&F in repairs 25mm dia stainless steelcurtain rod not less than 0.80mm thick including sufficient fixing SS brackets & decorative end Knobs, 10 Nos SS rings in one Rmtr (minium 2 Nos at every 1.50m length or for every separate piece of rod fixed) complete, design as specified and directed by Engr in Charge. |
| 59 | S&F of 100mm long Butt hinges, aluminium hinges complete all as specified and as directed |
| 60 | S&F of 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, medium weight complete all as specified and as directed. |
| 61 | S&F of 200mm long aluminium anodised, barrel tower bolt of extruded section and fixed complete all as specified and as directed. |
| 62 | S&F of aluminum handles cast type, anodized of 150 mm size complete all as specified and as directed. |
| 63 | S&F of aluminum handles cast type, anodized of 100 mm size complete all as specified and as directed. |
| 64 | S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed. |
| 65 | S&F of Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 66 | S&F of Brass peg set of Hat and coat hooks (minimum 6 hooks), solid body, 175mm to 250 mm including suitable wooden frame and fixed to wall with PVC plugs and screw, complete all as specified and as directed. |
| 67 | Dismantling boarding any description fixed with nails in any position (including cup board/ wardrobe shutters/shelves upto 25mm thick) complete. |
| 68 | S&F of 18 mm thickPVC Celuka ply of both side prelaminated and other side plain white colour fixed with SS screws/ sealant/ solvent cement /adehesive for cabinet boxex and shitters purpose including cutting , joining, fixing glass etc & marking goodcomplete, colour and pattern as specified and approved by Engr-in-Charge. Make : Rajshri/ Black Cobra/ Sintex/ Durplast/ Alex. Note : Glass for cabinets will be measured and paid seperately as supply only item. |
| 69 | S&F of 12 mm thickPVC Celuka ply of both side prelaminated and other side plain white colour fixed with SS screws/ sealant/ solvent cement /adehesive for cabinet boxex and shitters purpose including cutting , joining, fixing glass etc & marking goodcomplete, colour and pattern as specified and approved by Engr-in-Charge. Make : Rajshri/ Black Cobra/ Sintex/ Durplast/ Alex. Note : Glass for cabinets will be measured and paid seperately as supply only item. |
| 70 | Supply only 4.0mm thick sheet glass, selected quality in squares n. exc 0.5 sqm each pane for cabinets as menionted above. |
| 71 | S&F of stainless steel (SS 304 grade) perforated cutlery rack of length 20\" to 22\", width of 14\" to 16\" and height of 4\" to 6\" including supporting telescopic ball bearing channels of 10\" length on both sides of rack, complete all as specified and as directed. Make : Godrej/ Sleek/ Hettich/ Hafele/ Ebco |
| 72 | S&F of stainless steel (SS 304 grade) plate rack of length 20\" to 22\", width of 14\" to 16\" and height of 8\" including supporting telescopic ball bearing channels of 10\" length (payload capacity of 45kgs) on both sides of rack, complete all as specified and as directed. Make : Godrej/ Sleek/ Hettich/ Hafele/ Ebco |
| 73 | S&F of stainless steel (SS 304 grade) multipurpose container rack of length 20\" to 22\", width of 14\" to 16\" and height of 15\" to 18\" including supporting telescopic ball bearing channels of 10\" length (payload capacity of 45kgs) on both sides of rack, complete all as specified and as directed. Make : Godrej/ Sleek/ Hettich/ Hafele/ Ebco |
| 74 | S&F of modular soft close SS hinges of any degree opening, complete as specified and as directed by Engr-in-Charge. |
| 75 | S&F of modular stainless steel handle 200mm complete all as specified and as directed. Make : Godrej/ Sleek/ Hettich/ Hafele/ Ebco |
| 76 | S&F of modular stainless steel handle 150mm complete all as specified and as directed. Make : Godrej/ Sleek/ Hettich/ Hafele/ Ebco |
| 77 | S&F of aluminium anodised barrel tower bolts of extruded section of 100mm size, complete all as specified and as directed. |
| 78 | S&F of heavy duty Mild steel tee hinges, stove enamelled black, 150mm complete all as specified and as directed. |
| 79 | S&F of Mortice latch with two levers (vertical type), 100mm mild steel body and fixed complete all as specified and as directed. |
| 80 | S&F of heavy duty stainless steel magnatic door catcher and striking plate,including fixed with SS screw, complete all as specified and as directed. |
| 81 | S&F in repair plate rack of size 900mmx750mm made out of 1mm thick stainless steel sheet of 304 AISI grade of wire type / sheet patternsize and type as directedand approved by GE fixed to wall with necessary SS screws/plugs/brackets etc fitting arrangement complete all as specified and as directed. |
| 82 | S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratorywith plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 83 | Taking up or down steel tubing and connections including cleaning for refixing or removing to store of 15mm bore of pipe, complete all as specified. |
| 84 | Taking up or down steel tubing and connections including cleaning for refixing or removing to store of 20mm bore of pipe, complete all as specified. |
| 85 | Taking up or down steel tubing and connections including cleaning for refixing or removing to store of 25/ 32mm bore of pipe, complete all as specified. |
| 86 | Supply and laying of 20mm dia of bore CPVC pipe SDR-11 and plain CPVC SDR-11 fittings (ISI) marked, concealed or fixed to wall or laid in floors complete all as specified. |
| 87 | Supply and laying of 25mm dia of bore CPVC pipe SDR-11 and plain CPVC SDR-11 fittings (ISI) marked, concealed or fixed to wall or laid in floors complete all as specified. |
| 88 | Supply and laying of 32mm dia of bore CPVC pipe SDR-11 and plain CPVC SDR-11 fittings (ISI) marked, concealed or fixed to wall or laid in floors complete all as specified. |
| 89 | Supply and laying of 16mm dia of bore CPVC pipe SDR-11 and plain CPVC SDR-11 fittings (ISI) marked, concealed or fixed to wall or laid in floors complete all as specified. |
| 90 | Dismantling of water tanks exc 250 ltr and n.exc 500 ltr capacity and removing from site complete all as specified and as directed. |
| 91 | Dismantling of water tanks exc 500 ltr and n.exc 1000 ltr capacity and removing from site complete all as specified and as directed. |
| 92 | S&F Rotational moulded polyethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, triple layer in construction white in colour hoisted and fixed in position complete all as specified and as directed by Engr-in-Charge. |
| 93 | S&F Rotational moulded polyethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, triple layer in construction white in colour hoisted and fixed in position complete all as specified and as directed by Engr-in-Charge. |
| 94 | Disconnectin existing water tanks, setting aside (or lowering if requred) for repairs, cleaning etc and reconnecting and refixing in position capacity exc 500 and n exc. 1000 repairing etc measured separetly) |
| 95 | Disconnectin existing water tanks, setting aside (or lowering if requred) for repairs, cleaning etc and reconnecting and refixing in position capacity exc 250 and n exc. 500 ltr. (cleaning repairing etc measured separetly) |
| 96 | Cleaning and removing all scale and dirt etc. from tanks and from mouth of circulating pipes etc capacity of tank exc 250 ltrs but n.exc 500 Ltrs complete all as specified and as directed |
| 97 | Cleaning and removing all scale and dirt etc. from tanks and from mouth of circulating pipes etc capacity of tank exc 500 ltrs but n.exc 1000 Ltrs complete all as specified and as directed |
| 98 | S&F in repairs for 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed in 20mm dia pipe. (Minimum weight 15mm-142gms, 20mm-210gms, 25mm-455gms, 40mm-690gms) complete all as specified and as directed. |
| 99 | S&F for 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed in 20mm dia pipe. (Minimum weight 15mm-142gms, 20mm-210gms, 25mm-455gms, 40mm-690gms) complete all as specified and as directed. |
| 100 | S&F in repairs for gun metal globe/gate valve with iron wheel head screwed both ends for iron pipe of 20mm bore complete all as specified and as directed. |
| 101 | S&F in repairs for gun metal globe/gate valve with iron wheel head screwed both ends for iron pipe of 25mm bore complete all as specified and as directed. |
| 102 | S&F in repairs for vitreous china squatting pan, orissa pattern sise 580x440mm white with integral foot rest (excluding flushing cistern) including vitreous china ‘P’ or ‘S’ traps and connection to trap and to flushing pipe to complete and making good to floor, complete all as specified and as directed. |
| 103 | S&F in repair for PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float end handle handle including bracket complete of capacity 10 litres, complete all as specified and as directed. |
| 104 | Supply and fix in repairs flush pipe fixed to pedestal pan, incl all joints, of polythylene of low or high denisity or PVC 32 mm dia for low level cistern complete |
| 105 | S&F for in repairs 15mm angle cock chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered \"hot\" or Cold\" with long srewed shanks and flynuts, srewedfor iron pipe fixed and complete all as specified . |
| 106 | S&F in repairs for shower rose brass chromium plated without swivel joints, 100 mm in size including fixing to steel pipe complete all as specified and as directed fixedin repairs, complete all as specified and as directed. |
| 107 | S&F for in repairs 15mm, pillar taps fancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered \"hot\" or Cold\" with long srewed shanks and flynuts, srewedfor iron pipe complete all as specified . |
| 108 | S&F for in repairs looking mirror of bevelled edge of mounted stainless steel frame with selected quality glassfixed to wall with stainless steel screws complete all as specified and as directed. Make : PRAYAG/ PARRYWARE/CERA /HINDWARE/ JAQUAR |
| 109 | S&F in repairsFloor mounted one piece (Including Flushing Cistern) pedestal pattern water closet with soft closing seat cover and inbuilt flush tank(Make Jaquar Cat NoCNS-WHT-353SPPZ) Size (mm) 380 x 630 X 770 or similar PRAYAG/ PARRYWARE/CERA /HINDWARE/ JAQUAR |
| 110 | S&F for in repairs of vitreous china wash basin, white, flat back, size 550 x 400mmexcluding taps,waste, chain and plug andporcelainstopper but including cutting for and pinning in ends of and including brackets complete all as specified and as directed. Make : PRAYAG/ PARRYWARE/CERA /HINDWARE/ JAQUAR |
| 111 | S&F for in repairswaste couplingfittings , brass chromium plated for glazed ware sinks ,basins ,etc.with long screwed shanks and fly nuts ,flange end bedded in red lead cement and other fixed 32 mm dia bore complete all as specified. |
| 112 | S&F in repairs 32mm dia ribbed PVC waste drain pipe for WHB, urinal etc, strached length 90cm with PVC coupling socket complete all as specified and as directed |
| 113 | S&F in repair for 15mm dia PVC connection with PTMT nuts of length 450 mm, heavy duty, steel wire mesh coated complete all as specified and as directed. |
| 114 | S&F in repair for15mm dia PVC connection with PTMT nuts of length 600 mm, heavy duty, steel wire mesh coated complete all as specified and as directed. |
| 115 | S&F for in repairs mild steel Chromium plated grating 100 mm dia, fixed in repairs to Nahani traps, complete all as specified and as directed. |
| 116 | S&F for in repairs for 15 mm Stop valve cast copper alloy screwed down high pressure with CAPSTON HEAD handle chromium plated with long shank and cup (concealed type) screwed both ends for iron pipe 15mm bore or for unionscomplete all as specified and as directed. |
| 117 | S&F for in repairs for 15mm, bib tapFancy type long body chromium plated,cast copper alloy, with capston heads,scewed down high pressure, with or without lettered \"hot\" or Cold\" with long srewed shanks and flynuts, srewedfor iron pipe complete all as specified |
| 118 | S&F for in reairsPVC bath room cabinet mirror of Size 500mmx400 mm makePrayag Cat No 556or euivelent in other makecompleteall as specified and directed.by Engineer in charge. |
| 119 | S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12cm wide with chromium plated bracket and guard and railing 60cm long completed all as specified and directed |
| 120 | S&F in repairs corner glass shelf 300mm (with ABS Bracket ) complete all as specified and as directed. |
| 121 | S&F for in repairs Soap dish of CP fixed with pvc rawal plugs and screw, complete all as specified and as directed. |
| 122 | S&F for in repair brass cromium platedtubular towel rail D type 20mm dia and 60cm long complete all as specified and as directed. |
| 123 | S&F in repairs for shower rose brass chromium plated without swivel joints, 300x300 mm in size including shower arm sufficient length for fixing to steel pipe complete all as specified and as directed. Make : Cera/ Prayag/ Parryware/ Jaquar/ Hindware |
| 124 | S&F in repairs for wall mixer with Three in one pattern in of brass CP, 15mm dia with telephonic shower hose with hand shower complete all as specified and as directed. Make :Neptuneseries of Prayag or similar in PARRYWARE/CERA /JAQUAR/HINDWARE. |
| 125 | S&F in repairs Brass CP WHB mixer for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified. MAKE : Neptuneseries of Prayag or similar in PARRYWARE/CERA /JAQUAR/HINDWARE |
| 126 | S&F in repairs single lever Sink Mixer with Swinging Spout on Upper Side (wall Mounted Model) with connecting Legs & Wall Flangers for 15mm bore iron pipe complete all as specified. |
| 127 | S&F for in repairsHealth Faucet (ABS Body) mild steel chromium plated 15 mm diawith 1.25 meter PVC flexible bodypipe of CPincluding fixing bracket, complete all as specified and as directed. MAKE : Prayag or similar in PARRYWARE/CERA /JAQUAR/HINDWARE |
| 128 | S&F in repairs Toilet paper holder with flat recessed type stainless steel fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. |
| 129 | Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) of any description and in any position including all fittings, heads, shoes, bend, swan necks etc (measured overall as fixed along the centre line over fittings and accessories) complete all as specified |
| 130 | S&F for 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified |
| 131 | S&F for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified |
| 132 | S&F for 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified |
| 133 | S&F for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified |
| 134 | S&F for 110mm dia PVC (SWR) pipe bends any radious complete all as specified and as directed. |
| 135 | S&F for 75mm dia PVC (SWR) pipe bends any radious complete all as specified and as directed. |
| 136 | S&F for 110mm dia PVC (SWR) pipes junction single (single T/Y) equal or unequal any radious with access door complete all as specified. |
| 137 | S&F for SWR bends 75mm provided with access door complete all as specified. |
| 138 | S&F for 110mm dia PVC (SWR) vent cowl complete all as specified. |
| 139 | S&F Stack clamps made out of50 mm by 5 mm flat iron and 16 mm dia around iron stays including boltand nuts for securingends of stays to walls or roofs, bore pipe 100 mm dia pipe complete all as specified and as directed. |
| 140 | S&F Stack clamps made out of50 mm by 5 mm flat iron and 16 mm dia around iron stays including boltand nuts for securingends of stays to walls or roofs, bore pipe 75 mm dia pipe complete all as specified and as directed. |
| 141 | M&L for PVC (SWR) gully trap 125 /100plain with gratingincl. jointing with solvent cement as in repair, complete all as specified and as directed. |
| 142 | M&L for 75mm thick PCC (1:3:6) Type C2using 40mm graded stone aggregate as in plinth protection/hard standing and floor finishes surface even and fair without using extra cement complete all as specified and as directed |
| 143 | M&L for Forming Construction joint 30mm deepx10mm wide filled with sealing compound grade A complete all as specified and as directed. |
| 144 | M&L for 75mm thick PCC type B1 (1:2:4) (20mm graded aggregate) in floors complete |
| 145 | M&L for Priming surfaces and applying normal treatment (formoderate conditions) using glass fibre base bitumen felt, grade 2 in sunken floor surfaces complete all as specified and as directed. |
| 146 | M&L for 20 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface and mixed with WPC finished even and smooth without using extra cement complete. |
| 147 | M&L for applying bonding agent for bonding old to new concrete surface likes chajja/ beam/ceiling/facia etc by high performance modified Styene- Butadiene Rubber (SSR) base binder. Applying of binder is as 10 Sqm/ per lits etc complete all as specified and as directed. |
| 148 | M&L for applying 25 mm thick (average) repair mortar ready to use single component polymer modified repair mortar for repair of Rcc members likes beams, columns, chajja and facia/ ceiling, mortar having good compressive strength and shrikage resistance etc complete all as specified and as directed. |
| 149 | M&L for PCC type E2 (1:5:10) with 40mm graded brick aggregate as in filling of sunken floors complete all as specified and as directed. |
| 150 | Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and as directed. |
| 151 | Taking down ceilingfan of any sweep,removing blades, cleaning the fan completely of dust and dirt and Re-hanging the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including replacement of old unserviceable fan hook rubber pad, nut bolts and washers etc, complete all as specified and as directed by Engr-in-charge. |
| 152 | Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and as directed. |
| 153 | Taking down unserviceable Sheet metal box & MCB DB SPN with MCB\"s of any make/capacity, complete, all as specified and directed by Engr-In-Charge. |
| 154 | Taking down unserviceable TPN/VTPN DBwith MCB\"s of any make/capacity, complete, all as specified and directed by Engr-In-Charge. |
| 155 | Taking down the water heater (Geyser) storage type of any make25/50 Ltrs capacity. Dismantling carefully from its position fixed on walls, descaling the inner tank, flange assembly by applying descaling solution, reassembling the same, after replacement of defective parts and re-installing to their original locations or as directed, after commissioning and testing complete, all as directed by the Engr-in-charge. |
| 156 | M&L, concealed point wiring (Modular) with PVC insulated and unsheathedelectric cable 1100 volts grade single core FRLSH confirming to IS 694: 2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No)not less than 20 mm diawith all fitting and fixing accessories and1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxesfactory made for mounting switch, regulators etc with and including modular sheet cover (white) of required sizeISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint insidefor mounting switches. sockets etccomplete |
| 157 | One light point controlled by one switch. |
| 158 | One Ceiling fan point controlled by one switch. |
| 159 | One Exhaust fan point controlled by one switch. |
| 160 | One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch. |
| 161 | One 3 pin/5 pin switch socket outlet, 5 Amps on independent board. |
| 162 | One Bell point controlled by one way 5 Amp push button switch. |
| 163 | For one light pointcontrolled by 2- two way switch |
| 164 | Description all as per item No 156 here in before but point wiring with 2.5 sqmm FRLSH confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire. ONLY for power point |
| 165 | Description all as per item No 156 here in before but point wiring with 2.5 sqmm FRLSH confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire. For inverter |
| 166 | S&F Modular switch 1 way 6 A,1 module complete all as specified and as directed. |
| 167 | S&F Modular Socket, 6A - 2/3 pin combined 2 module,complete all as specified and as directed. |
| 168 | S&F Modular switch 1 way 16 A,1 module complete all as specified and as directed. |
| 169 | S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and as directed. |
| 170 | S&F Socket 25A - 2/3 pin combined 2 module complete all as specified and as directed. For Inverter |
| 171 | S&F Modular switch 2 way 6A, 1 module complete all as specified and as directed. |
| 172 | S&F modular bell push flush type, 5 Amps complete all as specified and as directed. |
| 173 | S&F of buzzer Ding Dong, AC, 230 Volts, single pole complete all as specified and as directed. |
| 174 | S&F Modular ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and as directed. |
| 175 | S&F modular electronic step rotary type fan regulator of two module capacity 120 Watt, 240 volts, AC 50Hz complete all as specified and as directed. |
| 176 | S&FLamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings ISI Marked complete. |
| 177 | S&F LED Lamp 09/10 watt with 5 star rating complete all as specified and as directed. |
| 178 | S&F LEDMirror tube light fitting09/10 watt ,4000k to 6500kcomplete. |
| 179 | S&F Decorative ultra slim LED Tubelight fitting of LEDwith extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt,4000k to 6500k as per requiredfitting , incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor forelectrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed. |
| 180 | S & F decorative surface mounted hexagonal bulk head Back-lit LED luminair comprising of high brightness LEDsIP 66 protection LED of 10 watt including reqdlength of 1.5 Sqmm PVC multistranded 03/02 core copper conductor for connection from ceiling rose to light fittings incl testing on completion all as specified and as directed. |
| 181 | M&L, sub main wiringwith four single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and includingnon metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and as directed. (NOTE: (i) four run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chasesin wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface. |
| 182 | M&L, sub main wiringwith two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 4 sqmm size drawn in and includingnon metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 20 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and as directed. (NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chasesin wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface. |
| 183 | Supply, install, commissioning and installation of distribution meter box indoor type, factory made out of CRCA sheet 2mm thick complete with inside, outside powder coated independed housing formeters with transperent glass & rubber gasket packing with suitable size copper single/ two core wire for each control, cable gland, with 200 Amp rated TPN aluminium busbar (for outgoing) duly insulated (including self insulated) maintaining proper space for each busbar and grouting panel in wall etc complete including self closing locking arrangement and comprising for following fittings (i) MCCB 4 pole, 160 Amps- 01 No (For incoming)(ii) Amp Meter (0-100 Amp)- 01 Nos (iii) Volts Meter (0-500 Volts )- 01 No(iv) Indicator Lamp set of three R,Y,B- 01 Set(v) ASS & VSS with CTs -02 Nos ( 01 Each) (vi) MCB TPN 63 Amps - 04 Nos (For outgoing),(vii) One SPN on for security light ckt(outgoing) (viii)Nutral bus bar link mounted on insulator (xi) Supply and fix 3 phase energy meteras space in distribution box- 04 Nos Note;- (i) Cable entry gland made of polycarbonate of appropriated size shall be provided in each cable / wire entry as per IS standered. (ii) All internal wiring inside the panel used for metring purpose shall be PVC insulated FRLSH, ISI marked of size not less than 1.5 Sqmm. |
| 184 | S&F MCB DB, sheet metal enclosures double door TPN 4 way with bus bar 415 volts 2 in 1 shutter type (METAL DOOR)type with blanking plates where required and IP 43 degree protection complete all as specified and as directed. |
| 185 | S&F, MCB TPN 63 Amps, 415 volts \"C\" series 16 KA ,including connection with suitable size copper lugs complete all as specified and as directed. |
| 186 | S&F MCB DB, sheet metal enclosures double door SPN 8 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR)type with blanking plates where required and IP 43 degree protection complete all as specified and as directed. |
| 187 | S&F MCB DB, sheet metal enclosures double door SPN 4 way with rated bus bar 240 volts 2 in 1 shutter type (METAL DOOR)type with blanking plates where required and IP 43 degree protection complete all as specified and as directed. |
| 188 | S&F, MCB SPN 40 to 63 Amps, 240 volts \"C\" series 16 KA ,including connection with suitable size copper lugs complete all as specified and as directed. |
| 189 | S&F, MCB SP 6 to 32 amp 240 volts, 40 Amps, \"C\" series 10 KA including connection with suitable size copper lugs.complete all as specified and as directed. |
| 190 | S & F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amp. |
| 191 | Supplying, laying, testing and commissioning of XLPE insulated screened PVC bedded galvanised steel strip or wire armured electric power cable(Heavy duty ) with aluminium conductor 1100 volts grade, cross sectional area size 50 Sqmm 3.5 Core. |
| 192 | Excavation in trenches n exc. 1.5 m wide and n\" exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed. |
| 193 | Returning, filling of excavated soil, including spreading leveling, watering and well ramming in layers, not exceeding 25cm complete all as specified and as directed. |
| 194 | Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5m above the starting point complete. |
| 195 | Sand filling in trenches with clean dry unwashed sand free from sharp particles, gently punning around the cables complete. |
| 196 | Supplying and laying un reinforced precast concrete cable coverClass LV, Type I, flat size 250mm x 150mm x 40mm complete all as specified and as directed. |
| 197 | Supply and fix cable jointing kit for 1.1 KVgrade cable for endjoint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4core XLPE, armoured, Al conductor cable of size 25 to 50 sqmm. |
| 198 | S&F tube \"Light\" grade galvanised with all fitting laid in trenches, fixed to wall and floor of 50 mm dia for cable protection complete all as specified and as directed. |
| 199 | M & L for GI pipe Med grade of 25 mm dia alongwith all fittings and fixtures complete laid in trenches incl taking down old unsv gi pipe all as specified and directed. |
| 200 | M & L for GI pipe Med grade of 20 mm dia alongwith all fittings and fixtures complete laid in trenches incl taking down old unsv gi pipe all as specified and directed. |
| 201 | S&F 25 mm Gate Valve cofiorming to IS 14846/2000,ISI Mark MS Spindle and iron wheel head with both ends flanged with new rubber gasket,bolts and nuts including dismantling of old u/s Gate valve fixed at any location of size 25 mmm dia all as specified and directed. |
| 202 | S&F 20 mm Gate Valve cofiorming to IS 14846/2000,ISI Mark MS Spindle and iron wheel head with both ends flanged with new rubber gasket,bolts and nuts including dismantling of old u/s Gate valve fixed at any location of size 20 mm dia all as specified and directed. |
| 203 | Supply and fix electric water heater, storage type glass lined enamel tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc all as specified and directed. |
| 204 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories,copper winding, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, 5 star rated with brushless direct current motor (BLDC) completion all as specified and directed. |
| 205 | Supply & fix exhaust fans,steel body, AC single phase 230 Volt of size 300 mm sweep copper winding with louvecompletion all as specified and directed. |
| 206 | Supply and fix exhaust fan(Fresh Air Fan) made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mmall as per specified and directed. |
| 207 | M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 sqmm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test. Testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc with & including adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded BT stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, internal surface of concrete shall be given 10mm thick plaster in CM 1:4, pre cast RCC (1:2:4)type B-1 (using 20mm graded BTstone aggregate) 40mm thick cover, reinforced with 8mm dia deformed or TMT bars 3 Nos both way with 12 mm dia round bar handle, GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI medium grade earth lead protection pipe including provn of earth test point made of 50 x 5 mm MS Flat in \"D\" shape 500 mm legth grouted in wall complete 01 x 6 mm multistrand PVC insulated copper conductor ( Green Colour) to be provided from test point to DB through 20 mm dia concealed non metallic conduit complete all as specified and as directed as per MES Schedule Part I & II. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
