|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 2 | (a) 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 3 | SH: Brick Work |
| 4 | Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation 7.5 in foundations and plinth in : |
| 5 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 6 | SH: STONE WORK |
| 7 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
| 8 | Granite stone slab colour black, Cherry/Ruby red |
| 9 | Area of slab upto 0.50 sqm |
| 10 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of stepsand dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 11 | SH: Wood work & PVC |
| 12 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 13 | 150x10 mm |
| 14 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 15 | 125 mm |
| 16 | SH: Flooring |
| 17 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm or any other size(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. |
| 18 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 19 | Size of Tile 600x600 mm |
| 20 | Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. |
| 21 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08%and conforming to IS: 15622, of approved brand & manufacturer in all colours and shade in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints(Payment for grouting of joints to be made separately). |
| 22 | Size of Tile 600x600 mm |
| 23 | Grouting the joints of wall tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade(0.10 kg of hardener and 0.20 kg of resin per kg), including filling/grouting and finishing complete as per direction of Engineer-in-charge. |
| 24 | Size of Tile 300x450 mm |
| 25 | Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4coarse sand) bedding in laying of floor tiles and jointing with grey cement slurry @ 3.3kg/sqm |
| 26 | SH:-Roofing |
| 27 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. |
| 28 | Coupler |
| 29 | 75mm |
| 30 | 110mm |
| 31 | Bend 87.5° |
| 32 | 75 mm bend |
| 33 | 110 mm bend |
| 34 | SH: Finishing |
| 35 | 12 mm cement plaster of mix : |
| 36 | 1:6 (1 cement: 6 fine sand) |
| 37 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 38 | 1:6 (1 cement: 6 fine sand) |
| 39 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. |
| 40 | New work (two or more coats) over and including water thinnable priming coat with cement primer. |
| 41 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 42 | Two or more coats on new work. |
| 43 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 44 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 45 | Old work (one or more coats) |
| 46 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 47 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 48 | One or more coats on old work. |
| 49 | French spirit polishing : |
| 50 | One or more coats on old work. |
| 51 | SH: Repairs to Building |
| 52 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. (a) With cement mortar 1:4 (1cement: 4 coarse sand). |
| 53 | SH: Dismantling and Demolishing |
| 54 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 55 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 56 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: |
| 57 | Of area 3 sq. metres and below |
| 58 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 59 | For thickness of tiles 10 mm to 25 mm |
| 60 | Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 61 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 62 | Disposal of building rubbish / malba unserviceable items including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 63 | Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: |
| 64 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge.(a) Internal Work- Concealed pipe |
| 65 | Sub-Head : Sanitary Installations |
| 66 | Providing and fixingEWC fixed wall mounted Water Closet modelLYS-WHT-6953BIUFSM of Jaquar or equivalent make with UF Soft Close Slim Seat Cover, Hinges, Dual Flush Cistern ofSize: 370x670x720 mm, S Trap- 300 mm Fitting, Fixing Accessories And Accessories Set, with manually controlled device (push button), conforming to IS : 7231, including cutting and making good the walls and floors wherever requiredall complete as per manufacturer specification. |
| 67 | Providing and fixing wall hung integrated wash basin of make Jaquar ONS-WHT-10801 of size 495x440x365mm , 32 mm C.P. brass waste ofmake jaquar ALD-727or equivalent standard pattern, and Bottle Trap of Jaquar make model No. ALD-CHR-769L300x190, and making good the walls wherever requireall complete as per the direction of Engineer-inCharge |
| 68 | Providing and fixing single lever CP brass basin mixer of make Jaquar model no. OPP-CHR-15011BPM as per the direction of Engineer-in-Charge. |
| 69 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 70 | Providing, layingandjointing PVC SWR Type \"B\" soil waste and vent pipesconforming to IS-13592 : 2013 , including jointing with seal ring conforming toIS-14735 : 1999,including jointing the pipes with appropriate adhesive as per the manufacturers specifications and testing of joints etc complete. |
| 71 | 110 mm dia. |
| 72 | 75mm dia |
| 73 | Providing & fixing CP brass health faucet ( hand shower plus connection pipe)for European seatof Jaquar make model ALD-CHR-573 or equivalent i/c extension nipple and CP tee as required to execute the connection all complete as per direction of Engineer-in-charge. |
| 74 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. |
| 75 | (a) 15 mm nominal dia |
| 76 | Providing and fixing shower rose of Jaquar make modle No. CHS CHR-1661 or equivalent make ans as per the direction of Engineer-in-Charge. |
| 77 | Providing and fixing shower arm of Jaquar make modle No. SHA-CHR-479L300S or equivalent make ans as per the direction of Engineer-in-Charge. |
| 78 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 79 | 100 mm inlet and 100 mm outlet |
| 80 | Sand Cast Iron S&S as per IS: 1729. |
| 81 | SH: Water Supply |
| 82 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anticorrosive bitumastic paint, cutting chases and making good the wall: |
| 83 | 15 mm dia nominal bore |
| 84 | 20 mm dia. nominal bore |
| 85 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : |
| 86 | 25 to 40 mm nominal bore |
| 87 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 88 | 45 cm length |
| 89 | 15 mm nominal bore |
| 90 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 91 | 15 mm nominal bore |
| 92 | 20 mm nominal bore |
| 93 | Providing and fixing C.P. brass bib cock of Jaquar make model No. CON-CHR-037KN of approved quality conforming to IS:8931: |
| 94 | 15 mm nominal bore. |
| 95 | Providing and fixing C.P. brass stop cock (Concealed)of make Jaquar ALD-083 concealed body, CHR-15083KPM upper body or equivalent. |
| 96 | Providing and fixingCP brass Angle Valve of make Jaquar model OPP-CHR-15053PM of approved quality conforming to IS:8931: |
| 97 | 15mm nominal bore |
| 98 | Providing and fixingstainless steel chromium plated jali with frame of dia 100mm all complete as per the direction of Engineer-in-Charge. |
| 99 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 100 | Providing and fixing toilet paper holder :(a) C.P. brass |
| 101 | Providing and fixing stainless steel Towel rail of 600mm length of heavy duty and as per the dierction of Engineer in Charge. |
| 102 | Providing and fixing stainless steel soap dish holder of heavy duty and as per the dierction of Engineer in Charge. |
| 103 | SH:- Aluminium Work |
| 104 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 105 | (a) For fixed portion |
| 106 | (i) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 107 | (b) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). |
| 108 | (i) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 109 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 110 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 111 | SH:- New Technologies & Material |
| 112 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with M.S hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. |
| 113 | (M.S hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variationin profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 114 | Frame size 45 x 70 mm |
| 115 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. |
| 116 | (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 117 | 30 mm thick |
| 118 | SH:MISC Work |
| 119 | Providing and fixing/ making provision of the following electrical works:-1 nos power point with switch, , 1 nos exhaust fan, along with conduits, wiring etc with cost of all labour and material included in the above operation and as per the direction of Engineer-in-Charge. |
| 120 | Credit Items |
| 121 | Old dismantled Flush doors with chokhats |
