Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified. |
| 2 | Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in any type of soil completeall as specified and directed. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil complete all as specified and as directed. |
| 4 | Removal of excavated soil to a distancenot exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 5 | M&L for Plain cement concrete 1:4:8 type D-2 by using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete, in flooring path, sub foundation etc, complete all as specified and as directed . |
| 6 | M&L for ATT treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. |
| 7 | M & L for ATT treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as directed. |
| 8 | M&L for ATT treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed. |
| 9 | M&L for ATT treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed. |
| 10 | M&L for ATT treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. |
| 11 | M&L for flat fair finished formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed |
| 12 | M & L RCC M-25 design mix (using 20mm graded aggregates) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete |
| 13 | M&L for Formwork to fair finished surfaces of concrete, square or rectangular, sides of pillars, posts, struts, piers, columns and stanchions complete all as specified. |
| 14 | M & L for RCC M-25 design mix (using 20mm graded stone aggregates) as in columns, pillars, piers, posts and struts and the likecomplete all as directed. |
| 15 | M&l for flat fair finished formwork to sides and soffits of floor or roof beams, beam haunchings, columns, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and directed |
| 16 | M&L RCC M-25 design mix (using 20mm graded aggregates) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as directed. |
| 17 | M&L for flat fair finished formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed |
| 18 | M&L for rough finished suface of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed |
| 19 | M&L RCC M-25 design mix (using 20 mm graded granite stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 20 | M&L for preparation of existing concrete surface applying two layers of thermocol 0.3C subsequently over a coat of absorption coat by mixing W51 water in 1:10 ratio and further water proofing coat by mixing thermocol WP51 plus cement in upto 1:1.5:1 by volume with power mixture and applying over the entire surface, application will be applied through authorised applicator all as specified and directed. |
| 21 | M&L for plain cement concrete 1:2:4 type B-0 (using 12.50mm graded stone agg) over roof for making good depression / undulation and as in roof kerbrounded or chamfered on edges to match the existing, complete all as specified and directed. |
| 22 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns hooking ends cutting bending and binding with mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and as directed. |
| 23 | All as per item No. 22 specified here-in-above, but of 6 to 8mm dia bars complete all as specified and as directed. |
| 24 | All as per item No. 22 specified here-in-above, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directed. |
| 25 | M & L for Precast cement concrete 1:3:6 type C1 (20mm graded aggregate) solid block masonry exc.10 cm in width and setting in cement mortar 1:4 completeall as specified and as directed. |
| 26 | M&L for squared rubble walling, Jodhpur type, regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and directed. |
| 27 | Extra over stone walling for hammer dressingto face stone & dressing of face beds & joints as specified of squared rubble walling Jodhpur type brought upto courses with maximum depression of face from straight edge held against the dressed surface n exc 20mm and dressing face beds and joints, complete all as specified and directed. |
| 28 | M & L for rendering 15mm thick in CM 1:6 on other than fair faces of solid PCC block surface or concrete surface finished even and smooth without using extra cement complete all as specified and directed. |
| 29 | M & L for rendering 15mm thick in CM 1:4 on other than fair faces of solid PCC block surface or concrete surface finished even and smooth with WPC without using extra cement complete all as specified and directed. |
| 30 | M&L for rendering 5mm thick on fair faces concrete surfaces in CM 1:3 and finished even and smooth in ceilings without using extra cement complete all as specified and directed. |
| 31 | M & L for keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 all as specified and directed. |
| 32 | M&L for earth filling under floors, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in soft/loose soil complete all as specified and as directed. |
| 33 | M&L for Moorum/red bajri (from approved source) filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specifed and directed. |
| 34 | M & L for hardcore of broken stone or boulders of gauge n exc 63mm deposited, spread, levelled in layers n exc 15cm thick, watered and rammed to a true surface completeall as specified and directed. |
| 35 | M&L for 100mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate), as in sub base to floor, incl well compacting & laid to levels etc, complete all as specified and directed. |
| 36 | M & L for 25mm thickPlain Cement Concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) in sub base, floors, pavings as under the layer of floor finish complete all as specified and directed. |
| 37 | M&L Machine cut kota stone slab 18-20 mm thick as in floor (size not less than 580mm x 580mm), treads, steps (single piece), machine cut, laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and including M&L 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 38 | M & L for mirror polished kota stone slab 18-20 mm thick, machine cut, in riser of steps (single piece), skirting, dado and pillar laid over cement and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including backing coat of 10mm thick in CM 1:3 complete all as specified and directed |
| 39 | M&L 15-18 mm thick Udaipur green marble stone, machine cut and mirror polished laid in flooring, best quality as per sample, over & including 15 mm thick screed bed in CM 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble (size of stone shall not be less than 580mm x 580mm) complete all as specified and directed. |
| 40 | M&L 18-20 mm thick granite stone (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platform & similar nature works, machine cut,best quality as per sample, over & including 15 mm thick screeding in CM1:4, including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & providing necessary holes for gas pipe / water supply pipes etc complete all as specified and as directed. |
| 41 | M&L for rounding to edges of stones slabs, such as in steps, cooking platform, and other similar situations etc, complete all as specified and as directed. |
| 42 | M&L for glazed coloured ceramic tiles area exc 0.13 sqm but not exc 0.18 sqm as per IS 13712 grade II(a) over and including 10mm thick backing coat in CM (1:3) set & jointed in neat cement slurry and pointed with coloured cement to match on the vertical surfaces as in dado/skirting (colour & pattern as approved by GE) complete all as specified and directed. |
| 43 | M & L for Vitrified Ceramic tiles dark shade double charged 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc including over 15 mm thick screed bed or bedding layer in CM (1:6) for laying in floors finishing complete all as specified and directed. |
| 44 | S&F for anodised aluminium snap grid frame work of 605 X 605 mm panel size of pre powder coated pre fabricated GI section including hangers for false ceiling along the Walls suspended with and including dismantling of existing false ceiling complete all as specified and directed. |
| 45 | M&L for exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as specifed and directed. |
| 46 | M&L for Framed work as in doors or gates of angle or other section, Fe 410-W (Gde E250) quality-A with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing completeall as specified and as directed. |
| 47 | S&F powder coated Anodised aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with aluminium section weighing 0.55Kg/m with one or more rebates or for sliding windows (2 track / 3 track), ventilators with louvers having suitable mechanism for tilting, U shaped fillets etc complete all as specified and directed. Note : Glass panes in louvers & stainless steel wirecloth shall be measured and paid for separately. |
| 48 | S&F powder coated anodised aluminium door / window / ventilator shutters (minimum thickness of powder coating 50 micron), aluminium section weighing minimum 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, 2 tower bolts, 1 mortice lock of vertical type brass 4 levers size 65mm and anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 49 | S&F pre powder coated aluminium decogrill all as per sample fixed to aluminium framework of windows & ventilators complete all as specified and directed. |
| 50 | S&F 5.5mm thick tinted plain/frosted/black glass exc 0.5mm sqm each pane complete fixed to aluminium frame work including rubber beading complete all as specified and directed. |
| 51 | M&L in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 52 | S&F in repairs Mortice lock latch with two levers (vertical type), mild steel body 100mm long and fixed complete all as specified and directed. |
| 53 | M&L in repairs for fabrication of pressed steel cupboard shutters using 1.00mm thick MS plain sheet & frame 1.25mm thick bent to shape incl two coats of synthetic enamel paint on internal surfaces & two coats of hammer tone finish on external surfaces along with locking arrangement, mortice lock, handle etc complete. (Taking down of existing cupboard / almirah included in the rates) |
| 54 | S&F in repairs old mortice lock from steel cupboard doors and fixing only of brass body mortice lock of size 50mm with a set of 2 keys, complete all as specified and directed. |
| 55 | S&F200 mm long Aluminium, anodised, barrel tower bolts of extruded sectioncomplete all as specified and directed. |
| 56 | S&F 75 mm long powder coated Aluminium handles fixed to windows, fabricated type, anodised complete all as specified and directed. |
| 57 | S&F 150 mm long extruded Aluminium alloy handles, fabricated type, anodisedcomplete all as specified and directed. |
| 58 | S&F 100mm size bright finished chromium plated steel handle of approved shape & design fixed with cadmium coated screws on the steel cupboard, kitchen cabinet shutters etc |
| 59 | S & F 100 mm long medium weight, cold rolled Stainless steel Butt hinges complete all as specified and directed. |
| 60 | S & F 100 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed. |
| 61 | S & F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified and directed. |
| 62 | S&F in repairs 50mm size best quality double / single door stopper of aluminium alloy body and tongue, anodised & hard rubber shoe as per sample complete all as specified and directed. |
| 63 | M&L for 7.5cm thick Sand stone slabs in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc. n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4 complete all as specified and directed. |
| 64 | M&L for laying 40-50mm thick machine cut sand stone slabs as in plinth protections laid over 20mm thick cement sand screed in CM 1:4 over 50mm thick PCC all as specified and directed incl filling the joints of sand stone slabs with neat cement mixed with pigment to match the shade of slabs complete all as specified and directed. |
| 65 | S&F of 18mm thick UV coating, HDHMR board exterior grade, including acrylic high gloss sheet of 3mm thick over HDHMR board, antifungal, moisture resistance, anti borer, as per IS 14587 for frame and shutter for kitchen cabinets/cupboards etc complete all as specified and directed. Note:-Sample as approved by GE |
| 66 | S&F of 18mm thick UV coating, MDF board exterior grade, both side laminated with any colour antifungal, moisture resistance, anti borer, as per IS 14587 for kitchen/cupboards shelfs fixing with 1st class hardwood lipping/beading etc complete all as specified and directed. Note:-Sample as approved by GE |
| 67 | S&F in repairs of partial overlay / fully overlay hydraulic self closing concealed hinges having size 103mm x 64mm finish of nickel/silver complete all as specified and directed. |
| 68 | S&F in repairs of stainless steel cabinet / drawers handle having a length of 250mm and shape complete all as specified and directed. |
| 69 | M & L for preparing new plastered surfaces of walls and applying two coat of Oil Bound distemper, white or tinted, over 2mm thick wall care putty over a coat of alkali resistant primer and complete all as specified and directed. Note: Use of all scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective equipments are deemed to be inclusive in rates. |
| 70 | M & L for preparing new plastered surfaces of ceilings and applying two coat of Oil Bound distemper over a coat of alkali resistant primer and complete all as specified and directed. |
| 71 | M&L for preparing newly plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and as directed. |
| 72 | S&F factory made box type windows (steel) (BWM) with side hung shutter as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete with glazing bars, dovetailed or welded, complete all as specified and as directed.Note : (i) Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same.(ii) Guard bar, Glass panes & wirecloth shall be measured and paid seperately. |
| 73 | All as per item No. 72.00 specified here-in-above, but without glazing bars complete all as specified and as directed. |
| 74 | S&F factory made box type windows (steel) (BWM) with side hung shutter withcooler opening as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete with glazing bars, dovetailed or welded, complete all as specified and as directed.Note : (i) Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same.(ii) Guard bar, Glass panes & wirecloth shall be measured and paid seperately. |
| 75 | All as per item No. 74.00 specified here-in-above, but without glazing bars complete all as specified and as directed. |
| 76 | S&F of Box type steel ventilator with top hung shutter including hinges with steel handle, and steel peg stay, complete with glazing bars, complete all as specified and as directed. |
| 77 | All as per item No. 76.00 here-in-above,but without glazing bars complete all as specified and as directed. |
| 78 | Suppy and fabrication of mild steel guard bars, grills, grating and similar work and welded to window frames, door frames (made up of angle), balcony railing conforming to Fe 290 Gde E-165 etc all as specified and directed. |
| 79 | S & F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm with necessary fitting on steel / wooden surface complete all as specified and directed. |
| 80 | S & F 3mm thick sheet glass, pin headed type and glazing with oil putty in squares not exc 0.5sqm in each pane complete all as specified and directed by Engr-in-charge. |
| 81 | M&L preparation of steel and steel base surfaces over 10 CM width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer completeall as specified and as directed. |
| 82 | S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercialtype on both sides, both faces is covered with decorative face veneer with lipping/frame to match completeall as specified and as directed. |
| 83 | M&L for 20-25mm thick Machine cut kota stone slab as in shelves (single piece) fixed in walls, shelves, partition, slab etclaid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing and polishing complete completeall as specified and as directed. |
| 84 | Supply only integral water poofing compound complete all as specified and directed. |
| 85 | Supply only integral water poofing compound complete all as specified and directed. |
| 86 | S&F in repairs decorative type curtain rod stainless steel finishofpipe 22 to 25 mm diawith best quality knob metal with double fitting type including stainless steel brackets (trade pattern) fixed to walls complete with two nos decorative stainless steel knobs (fincals round type with mirror optic finish) at each end , sample as approvedby GE, complete all as specified and as directed |
| 87 | M&L for 100mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate), as in sub base to floor, incl well compacting & laid to levels etc, complete all as specified and directed. |
| 88 | Supply and layingmachine pressed / factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layersof anti abrasive material of M-35 grade with any colour, design & pattern, & size/ shape, as approved by GE as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thicknessmade by table vibratory method using PU mould, laid in required colour & pattern over and including M&L 25mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. |
| 89 | Supply and laying machine / factory made kerb stone of M-25 grade, at or near ground level, cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed. |
| 90 | Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation etc or n exc 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed. |
| 91 | Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation etc or n exc 10 sqm on plan and getting out in hard/dense soil complete all as specified and directed. |
| 92 | M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including use and waste of necessary formwork complete all as specified and directed. |
| 93 | M&L for 40mm thick damp proof course in cement concrete type B0 1:2:4 to horizontal or vertical surfaces including necessary formwork complete all as specified and directed. |
| 94 | M&L for precast cement concrete 1:2:4, type B1 (Using 20 mm graded granite stone aggregate) in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 completeall as specified and as directed. |
| 95 | M & L for 30mm thickPlain Cement Concrete Type B0 1:2:4 (using 12.5 mm graded stone aggregate) in sub base, floors, pavings, finishing the surface even and rough complete all as specified and directed. |
| 96 | M & L for 75 mm thick PCC (1:3:6) type C2 using 20mm graded stone aggregate as in plinth protection finishing the surface even and smooth without using extra cement, including expansion joint every 3m and change in direction and joint filled with sealing compound Grade A complete all as specified and directed. |
| 97 | S&F machine made precast cement concrete kerb stone blocks using cement concrete1:3:6 type C1 (20mm graded stone aggregate) and set in CM 1:4 complete all as specified and directed. |
| 98 | S&F 28-30mm thick precast chequered tiles any shape rubberised finish lacquer coated with top 4-5mm with anti abrasive material all as per sample laid over 15mm thick cement sand screed bed in CM 1:4 finished even & rough to receive tiling jointing & pointed in neat cement mixed with pigment complete all as directed at site. |
| 99 | M&L Machine cut kota stone slab 20-25 mm thick as in floor (size not less than 580mm x 580mm), treads, steps (single piece), machine cut, laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and including M&L 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 100 | M&L for glazed coloured ceramic tiles area exc 450x350x7 / 350x250x7 to 8 mm thick as per IS 13712 grade II(a) over and including 10mm thick backing coat in CM (1:3) set & jointed in neat cement slurry and pointed with coloured cement to match on the vertical surfaces as in dado/skirting (colour & pattern as approved by GE) complete all as specified and directed. |
| 101 | M&L for non-skid coloured ceramic tiles joint free 7 to 8mm thick (Square/Rectangular)area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm in floors set and jointed in neat cement slurry and pointed incoloured cement to match including over 15 mm thick screed bed or bedding layers in CM (1:4) for laying in floors finishing ,complete all as specified and directed. |
| 102 | S&F 4mm thick pin headed figured glass in small widths as in louvers of ventilators complete all as specified and directed. |
| 103 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: (a)-For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(b)- M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately. |
| 104 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixingwith stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed. |
| 105 | S&F150 mm long Aluminium, anodised, barrel tower bolts of extruded sectioncomplete all as specified and directed. |
| 106 | S & F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified and directed. |
| 107 | M&L for three coats of white wash including preparation of new surfaces as on ceilings complete all as specified and as directed. |
| 108 | S&F counter type Vitreous china wash basin white/coloured size 630X450 mm including 15mm bore swan neck pillar taps cast copper alloy chromium plated fancy type, with capstan heads, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shank and fly nuts, screwed for iron pipe fixed with CP waste coupling 32mm and waste pipe complete all as specified and directed. |
| 109 | S&F Vitreous China wash down water closet pan European type pedestal pattern (excluding fixing bolts, flushing cistern and flush pipe), white with seat and cover including cast iron \"P\" or \"S\" trap, complete all as specified and as directed. |
| 110 | S&Fof 10 ltrs capacity PVC valve less, ISI Marked syphonic action type, flushing cistern, low level, with Anti Bacterial Knob, with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia and PVC connection 15mm size & 450 mm long, cistern colour shall be match WC colour, complete all as specified and as directed. |
| 111 | S&F toilet paper holder, vitreous china, box type coloured complete all as specified and as directed. |
| 112 | S & F CP Hand Shower (Health Faucet) with 8mm dia, 1.2 Mtr long flexible tube & wall hook with N.R.V (Back flow preventer), 15 mm dia complete all as specified and directed. |
| 113 | S&F Bevelled edge mirror of selected quality glass of any size fancy type frame, mounted on 6 mm thick AC building board or commercial plywood & fixed to wooden plugs with chromium plated brass screws and cup washersetc complete all as specified and directed. |
| 114 | S&F tubular towel rail brass chromium plated fancy type 20mm dia and 60 cm long fixed between flanges complete all as specified and directed. |
| 115 | S&F in corner glass shelf 300mm superior quality with CP tubular framing & brackets complete all as specified and directed. |
| 116 | S&F Soap dish, chromium plated, any type, as approved fixed with brass screws or embedded in wallcomplete all as specified and directed . |
| 117 | S&F PVC waste pipes of 40/32mm bore suitable for wash hand basins / urinals laid/fixed on walls or in floors etc complete all as specified and directed. |
| 118 | S&F PVC connections 15mmdia , 600mm long, withPTMT nuts& washers at both ends complete all as specified and directed. |
| 119 | S&F 15 mm bore long body bib cock with wall flange and aerator, brass chromium plated with fancy type and screwed down to 15 mm bore GI tubing or for brass ferrule complete all as specified and directed. |
| 120 | S&F 15 mm bore angle stop valve with wall flange, brass chromium plated, fancy type with long shank and cup, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 121 | S&F 15mm bore two way angular stop cock with wall flange, chromium plated brass, fancy type, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 122 | S&F 15mm bore stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed bothends for iron pipe or for unions and fixed complete all as specified and directed. |
| 123 | M&L of 110mm bore PVC (SWR) floor trap plain with grating and 300mm long outlet including jointing with cement concrete type B1 1:2:4 solvent cement, complete all as specified and directed. |
| 124 | M&L of 75mm PVC (SWR) floor trap plain with grating including jointing with solvent cement to waste pipe in cement concrete type B1 1:2:4 complete all as specified and directed. |
| 125 | M&L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified |
| 126 | S&F Rotational moulded polythene water storage tanks of 1000 ltrs capacity, white three layered (ISI marked) (Cylindrically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I with PTMT ball valve high pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms complete all as specified and as directed. |
| 127 | Supplying & laying of CPVC pipe SDR 11 having outer dia 25mm with plain CPVC SDR 11 fittings such as bends, elbows, unions and end pieces to receive the fittings, concealed in walls/ceiling or lay in floors, complete and fixed with solvent complete all as specified and as directed. |
| 128 | All as per item No.127 here in before but 20mm outer dia pipes complete all as specified and as directed. |
| 129 | S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laidin trenches or in floors of suitable size complete all as specified and as directed. |
| 130 | S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laidin trenches or in floors of suitable size complete all as specified and as directed . |
| 131 | S&F 75mm bore PVC (SWR) bends provided with access door complete all as specified and as directed |
| 132 | S&F of 110 mm bore (SWR)PVC bends any radius with access door, complete all as specified and directed. |
| 133 | S&F 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed. |
| 134 | S&F 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and as directed. |
| 135 | S&F 110mm PVC (SWR) WC connector with lip ring complete all as specified and as directed. |
| 136 | S&F 75 mm bore PVC vent cowl complete all as specified and directed. |
| 137 | M&L for connecting 40mm bore GI pipe from existing water supply line including necessary excavation, clamping making holes to existing pipeline complete all as specified and directed. |
| 138 | S&F 40mm bore steel water tubing, medium grade, galvanised, with all fittings for flush pipes, water supply pipes; laid in trenches / floors or fixed to walls and ceilings complete all as specified and directed. |
| 139 | S&F 25mm bore steel water tubing, medium grade, galvanised, with all fittings for flush pipes, water supply pipes; laid in trenches / floors or fixed to walls and ceilings complete all as specified and directed. |
| 140 | M&L for roughly squared stone lintels hammer dressed on face and soffits, hoisted, set and pointed in cement mortar 1:6complete, n exc 3m in length complete all as specified and directed. |
| 141 | M&L 150 mm dia Reinforced concrete pipes, class NP2 laid and jointed complete with collars drain pipes laid in trenches and jointed completeall as specified and as directed. |
| 142 | M&L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore completeall as specified and directed. |
| 143 | M&L for soakage wells, excavation in any type of soil, foundation in PCC 1:3:6, walls of honeycombed masonry with top ring of M25 concrete incl intercepting chamber and screen chamber made of brick/stone masonry in CM, RCC cover slabin M25/SRFC cover, interconnecting pipes of RCC/DWC complete filled with brick/stone bats of size 2.5m dia x 3.0m effective depth all as specified and directed. |
| 144 | M&L for neat cement slurry @ 3.00 Kg/Sqm and screed bed / bedding layer of 10mm thick in CM 1:3 mixed with water proofing compound as per manufacturer\"s instructions over the RCC roof slab for laying of water proofing treatment including providing the following as roof treatment complete all as specified and directed :(a) First Course : Applying a coat of bituminous primer @ 0.40 Litre/Sqm manufactured by same agency that of APP with a density 0.87 to 0.89 Kg/Litre at 25 degree celsius on prepared plastered surfaces.(b) Second course : Applying one coat of bonding material using blown type bitumen confirming to IS:702 grade 85/25 @ 1.20Kg/Sqm (c) Third course : Provide a layer of APP modified polymeric membrane centre core of 100mm micron HMHDPE, outer film 20 micron each, thickness 3.00mm having weight not less than 3.00Kg/Sqm using torch application method with minimum 10cm side lap and 15cm end lap complete. (d) Fourth Course : Applying one coat of bonding material using blown type bitumen confirming to IS:702 grade 85/25 @ 1.20Kg/Sqm (e) Fifth Course : 40mm thick plain cement concrete 1:2:4 (using 20mm stone crushed aggregate) as in roof padding, including WPC as per manufacturer instruction.Note : 1. A information tablet will be put up in the front side wall of the buildings where this work will be done. All building/ structure shall be provided with plaque (tablet) furnishing the information as per PS clause, in plaster engraving in and painted as directed by GE.2. WPC shall be measured and paid separately under respective item. |
| 145 | M&L for (concealed) point wiring complete with multistranded copper conductor 1.5 Sqmm PVC insulated unsheathed single core FRLS cable 1100 volt grade, confirming IS 694 & colour code in conduit system of wiring,drawn through in and includingnon-metalicPVC concealed (including Cutting Chases and make good the distrubed surfaces as per existing finishes) conduit of size 20 mm or med grade as required as site, totally concealed in walls / and surface on floors / ceiling or fixed on surface of walls / columns / beam / tie beam etc by means of saddles and clips etc incl all conduit accessories / fittings / junction boxes / inspection covers etc of heavy grade, ISI marked and sunk terminal boxes of CI or 16 SWG pressed steel housing, totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk / cup washers, for mounting of switches, sockets fan regulators etc incl 1.5 Sqmm FRLS PVC insulated, unsheathed flexible multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, suitable for One light/fan point controlled by one, one wayswitch, complete all as specified and directed.Note:- The rates of chase cutting on wall done concealed conduit & making good good the distrubed surfaces as per existing finishes and steel terminal boxes are included in the unit rates |
| 146 | All as per Sr. item No.145 here-in-above, but suitable for One socket outlet 3 pin, 5 Amps on independent board, controlled by one no 5 Amp switch complete all as specified and as directed. |
| 147 | All as per Sr. item No.145 here-in-above, but suitable forOne socket outlet 3 pin 5 amps on the same board controlled by one no 5 Amp switch complete all as specified and as directed. |
| 148 | All as per Sr. item No.145 here-in-above, but with using 2.5 Sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for independent 15 Amp point complete all as specified and as directed. |
| 149 | S&F Switch piano type, single pole, one way, 5/6 amps, 230 volts, complete all as specified and directed. |
| 150 | S&F Switch piano type, single pole, one way, 15/16 amps, 230 volts, complete all as specified and directed. |
| 151 | S&F socket outlet flush type 6 Amp 3/5 pin suitable for 6 Amp plug top 230 V incl dismantling of old unservicable socket of any make complete all as specified and directed. |
| 152 | S&F socket , 6 pin, 5/16 Amp, multipurpose shutter type, 230 Volts complete all as specified and directed. |
| 153 | S&F Ceiling rose, two to three terminals, bakelite body, 230 Volts complete all as specified and directed. |
| 154 | Supply and fixing LED lights fitting 1x 20W,4 ft long, T-5 batten fitting, designed linear sleek aesthetic PVC housing, PC cover ensures soft and glare free lighting wide angle of 120 degree, upto (110Lm/W) complete all as specified and as directed. |
| 155 | S&F bldg security LEDLight Luminaire of 35 Watts having IP 66 protection fitting made out of pressure die cast Aluminium housing with toughened glass with fixing of suitable size medium grade GI pipe and including drilling holes, nuts & bolts 2 coats of red oxide primer on GI pipe and fixing with wall security light on building wall connecting cable, complete all as specified and directed. |
| 156 | S&F in repairs 2\"x2\" energy efficient recess mounting 36 Watt LED lumainares fixing for POP/snapgrid ceiling housing including LED lamps other accessories and necessary electric connection complete all as specified and directed. |
| 157 | S&F Vertical Distribution Board, double door, suitable for \"A\" frame FP MCCB 100A made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP43 & IK09 protection, TPN 4 way, 415 Volts with bus bar rating 300 Amps, dust and vermin proof, suitable for incorporation of MCB\"s and MCCB etc and making all necessary connections, duly flush of wall surface complete all specified and directed. Note: MCCB and MCB will be measured and paid separately under respective items. |
| 158 | S&F MCCB, A frame, thermal adjustable magnetic setting, Ics=75% 16kA, 415V, 100 Amp, 4 pole MCCB with overload and short circuit protection complete all as specified and directed. |
| 159 | S&F sheet metal enclosures 240 Volts with suitable rated bus bar for double door IP-43 DB\"s suitable for one MCB SPN as incoming and 10 MCB SP as outgoing SPN 12 way complete all specified and directed. |
| 160 | S&F MCB, B type curve, 10kA, 40 to 63 Amp, SPN with over load and short circuit protection complete all specified and directed. |
| 161 | S&F MCB, B type curve, 10kA, 5 to 32 Amp, single pole with over load and short circuit protection complete all specified and directed. |
| 162 | M&L in repairs sub main wiring with PVC insulated and unsheathed 4 sqmm single core multistranded copper conductor cable passing through in and including PVC conduit, concealed on walls ISI marked and conduit accessories fixed concealed in wall, ceiling etc making good the distubed surface, incl 4 sqmm single core copper conductor cable PVC insulated and unsheathed as earth wire. Note : Two runs of cable 4 sqmm and one run of 4 sqmm along with conduit shall be measured as one unit length. |
| 163 | M&L Earthing complete with galvanised steel earth plate electrode 60 x x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel and connected to test point and earth dolly all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil PCC 1:3:6 type C1 in chamber, precast RCC 50mm thick in cement concrete 1:2:4 type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 mm dia with cast iron frame, funnel with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15mm bore medium grade GI protection pipe, test point etc complete all as specified and directed. Note : (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead. |
| 164 | Supply and install Air cooled split unit air conditioner electric driven, single phase of capacity 1.5 ton BEE 5 star rated with following specification : Cooling capacity - 7KW+2%, Electricity Input 230V/50Hz/Single phase, Coefficient of performance - 3.5(minimum), Max Ambient temperature - 480C+5%, Moisture removal rate - 2+10% Litre/hour, Air flow rate - 5.6Cmm(min), Noise level: Idoor unit - less than 45db, Outdoor unit with stand - less than 55db, Function modes - Auto/cool/fan/dry - shall have sleep and power saving modes. other features - Automated vertical swing for horizontal louvers - Antifreeze thermostat, Compressor - rotary type, Body surface finish : Powder coated/high quality paint finish, Air filtering unit : activated carbon cartridge, dust proof and anti bacteria, length of rubing - 15m or as per the installation requirement, LED handsert - LED display night glow, complete all as specified and directed. |
| 165 | S&F of sheet metal enclosure SPN with a two pin earth plug and socket with metal clad top and one MCB, SP 20 Amps capacity complete all as specified and directed. |
| 166 | Supply and fix Voltage stabilizer for automatic operation, single phase nautrally aircooled indoor type & designed for input variation between 170V to 250V with output voltage stabilized at 230 V with accuracy of +2.5% and of capacity 5KVA or current rating 15 Amp or above complete all as specified and directed. |
| 167 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep, min air delivery 210CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 168 | Supply, laying testing of LT UG XLPE in trenches / saddle clamping on wall (as per site requirement) through protection pipeinsulated, armoured, heavy duty electric cable, aluminium coductor, 1100 V grade, cross sectional area35 sqmm 3.5 core, complete all as directed by Engr-in-charge.Note : Earth work and brick work measured and paid separately |
| 169 | Supply and laying unreinforced Precast concrete cable cover, class LV, type 1,flat size 300 mm x 180 mm x 40mm, complete all as specified and directed. |
| 170 | Supply and laying of sand for sand cushioning for cable protection in trenches including punning down ofsand layer all as specified and directed. Note :- Punnedthickness shall only be measured and paid. |
| 171 | S&F GI tubing , light grade of 40mm bore with fittings as in road crossings for cable protection complete all as specified and as directed. |
| 172 | S&F advanced ESE lightening protection system for Bldg as per site requirement complete all as specified and directed. |
| 173 | S&F copper 20 x 3.15 mm with saddles and fixing screws, insulators rawal plugs etc for conductor for roof and fixed on wall upto test point all as specified. |
| 174 | S&F copper strip 32 x 6 mm fixed with saddles & fixing screws, PVC dash fastners, insulators fixed from test point to earth on walls or buried in ground/drawn into hume pipe. Note : Excavation & earthwork shall be measured and paid for separately under relevant item of schedule. |
| 175 | S&F single pointed air termination copper rod 12mm dia & 300mm long complete all as specified and directed. |
| 176 | M&L test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm of 6mm thickness drilled and screwed including 3 nos. 8mm dia 25mm long hexagonal head brass screws including box of size 90 x 90 x 90 mm made of 1.6mm plain sheet and screwed to wall for protection of test point complete all as specified and directed. |
| 177 | M&L for Earthing complete with chemical earthing with copper earth plate 90 x 60cm x 5mm & copper earth strip, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to copper earth strip 50x6 mm strip means of bolts, nuts, check nuts and washers of copper all as shown in electrical plate no 3 connected to earthing test point all as specified or indicated including testing on completion. Note : Rates are deemed to be included for necessary earthwork, earthpit with RCC cover of size 300x300x25mm etc complete all as specified and directed. |
| 178 | M&L for fixing heavy duty GI pipe (C class) of 50mm dia, ISI marked for hanging the ceiling fan in walls complete all as specified and directed. |
| 179 | S&F Ceiling rose, three terminals, PVC/Polycarbonate, isolated body, complete all as specified and directed. |
| 180 | S&F insulated Batton lamp holder metal cased body of brass with back plate suitable for batton fittings including 9 Watt LED lamps ISI marked |
| 181 | S&F Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230 V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed. |
| 182 | S&F distribution board in sheet metal with 200 Amps rated copper bus bar confirming to relevant IS SPN 4 way, Note : Rates are deemed to be included for flashing in wall concealed complete, making good and matching existing surface. |
| 183 | Supply, laying testing of LT UG XLPE in trenches / saddle clamping on wall (as per site requirement) through protection pipeinsulated, armoured, heavy duty electric cable, aluminium coductor, 1100 V grade, cross sectional area10 sqmm 2 core, complete all as directed by Engr-in-charge.Note : Earth work and brick work measured and paid separately |
| 184 | Note:- (i)Qty\"s have been clubbed from 2 Nos sanction Job\"s, whose details are encl as per appx (ii) The contract sum shall be arrived at after duducting amount of schedule of \"Credit\" from the Total quoted amount |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
