Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 20-02-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 27-02-2026 |
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames with shutters n.exc 1.5 sqm each (without taking off shutters from the frame) andall as directed. |
| 2 | Taking down chowkhats or frames with shutters exc 1.5 sqm but n.exc 4.00Sqm each(without taking off shutters from the frame) andall as directed. |
| 3 | S&F for Solid PVC Door Frame of size 50mm x 47mmmade out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 4 | S&F for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 5 | S&F 35mm thick, WPC, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etcwith rails and styles including cut and mitered beards for securing wire cloth etc,all as specified and directed. |
| 6 | S&F Factory made Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid decorative type door/window/ ceosetory windows & other frames / chowkat of size 65 x 125mm compressing of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100gms) fabricated with miter joints after applying PVC solvent cement and screwed with full boady threaded star headed SS screws having minimum density of 750 kg/cum and screwwithdrawal strength of 2200 N (Face) & 1100 N (Edge),minimum compressive strength 58 N/mm2, modulus ofelasticity 900 N/mm2 and resistance to spread of flameof Class A category with property of being termite/borerproof,water/ moisture proof and fire retardant and fixed in position with MS hold fast /Lugs/SS dash fastebers if required dia and length complete all as per direction of Engineer-in-Charge (MS holdfast /lugs or SS dash fasteners shall be paid separately) Note:- for WPC solid door/window frames. minus 5mm tolerance in dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and directed. |
| 7 | M&L Framed work as in such as grills gratings etc. with ends of bars shouldred and or rivited or forged into spikes guard bar, barried iron doors ladder framed balusters railing frame work for water tanks and similar works complete. |
| 8 | M&L for Powder coated coloured aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, rollers, snap beading, screws etc. powder coating thickness not less than 50 microns complete all as specifiedNote:- Window/Ventilator Frame shall be measured separately |
| 9 | S&F powder coated Aluminium frame for doors, windows, ventilators with one or more rebates including joint cleat for fixing etc complete all as specified. |
| 10 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mmthick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified.Factory made single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note:- stainless steel butt hinges and necessary S S screws shall be paid separately. |
| 11 | S&F SS hinges, 100mm sizecomplete all as specified and directed. |
| 12 | S&F SS butt hinges, 50mm size medium weight, cold rolled mild steel complete |
| 13 | S&F aluminium anodised barrel tower bolt 150mm long extruded section all as specified. |
| 14 | S&F aluminium anodised barrel tower bolt 100mm long extruded section all as specified. |
| 15 | S&F aluminium anodised aluminum handle 150mm long extruded section all as specified. |
| 16 | S&Fstainlesssteel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks/stainless steel wire staples all as specified. |
| 17 | S&Fin repairs stainlesssteel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks/stainless steel wire staples all as specified. |
| 18 | S&F Sheet glass 4.8mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane completeall as specified and directed. |
| 19 | S&F Sheet glass 4.8mm thick, ordinary quality & glazing with oil putty in square exc 0.5 sq.m in each pane completeall as specified and directed. |
| 20 | Dismantling of floor tiles, mozzac floor, hearth or wall tiling with cement mortar bedding, backingand dispose rubbish out off the premises complete all as specified and directed. |
| 21 | M&L for Vitrified ceramic light shade textured coloured tiles 10mm thick area of each tile not exceeding 0.36 sqmas in floors over 15mm thick screed bedin cement mortar 1:6 set and jointedin neat cement slurry and pointed in coloured cement. all as specified and directed |
| 22 | M&L for Vitrified ceramic light shade textured coloured tiles 10mm thick area of each tile not exceeding 0.36 sqmas in Vertical surfaces over 10mm thick backing coatin cement mortar 1:3 set and jointedin neat cement slurry and pointed in coloured cement. all as specified and directed |
| 23 | M&L for non skid ceramic coloured tiles 7 to 8mm thick area of each tile exceeding 0.06 sqmbut not exceeding 0.11 sqmas in floors over 15mm thick screed bedin cement mortar 1:6 set and jointedin neat cement slurry and pointed in coloured cement. all as specified and directed |
| 24 | M&Lglazed ceramic coloured tiles size 300 x 200 x 7mm/ 350 x 250 x 7mm / 450mm x300mm x 7mm thick in walls etc set and jointed in neat cement slurry and pointed in colour cement laid over 10mm thick backing coat in CM (1:3) complete all as specified and directed. |
| 25 | Supply only PD proof 101 LW(+) or Dr fixit or equalent integral water proofing compound |
| 26 | Dismantling of Stone slabs laided in any mortar complete all as specified and directed. |
| 27 | M&L for Granite (of any type) tiles 18 to 19mmthick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including screed bed 20mm thick in cemen tmortar 1:6completecomplete all as specified and directed. |
| 28 | M&L for providing Mirror polished kota sotne slab flooring 20-22mm thck over and including 15mm thick screed in Cement morter1:6 and jointed with grey cement slurry mixed with pigment including cutting and mirror polishing incl demolition all as spd and directed by Engr-in-charge |
| 29 | M&L for mirror polishedkota stone slab 20 to 22mmthick as in dado skirting over cement10mm thick backing coat in cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and directed. |
| 30 | S&F in repairs 1200 x 450 x 5.0mm thick looking mirror bevelled edge of selected quality glass with aluminium frame of channel alround mounted onAC building board or commercial ply woodand fixed to wooden plug with CP brassscrews, complete all as specified and directed. |
| 31 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 32 | S&F in repair fancy type chromium plated long body bib taps 15mm bore with crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed all as directed and specified |
| 33 | S&F in repair vitreous china wash hand basinwhite flat back of size 550x400mm including cutting for and pinning in ends of brackets, PVC flexible waste pipe 32mm dia,brass chromium plated waste fittings, and pedestal etc complete all as directed and spcified. |
| 34 | Supply only waste fittings brass chromium plated 40mm dia for wash hand basin completeall as specified and directed. |
| 35 | Supply only waste fittings brass chromium plated 32mm dia for wash hand basin completeall as specified and directed. |
| 36 | S&F in repair 20mm dia brass CP towel rail600mm long all as specified and directed by Engr in Charge |
| 37 | S&F in repairs 15mm bore PVC connection pipe of450mm size with 2 Nos brass check nuts with washers |
| 38 | S&F in repairs 1000 ltrs capacity three layer rotational molded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted ofand fixed in position including, dismantling existing water tanks etc all as specified and directed. |
| 39 | S&F in repairs 15mm bore Stop valves/Angular stop valves fancy type chromium plated, cast copper alloy, screwed down, high pressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed complete all as specified and directed. |
| 40 | S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratorywith plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 41 | S&F in repairs 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 42 | S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 43 | S&F in repairs 15mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 44 | M&L for Cutting chases, pinning in. making good to facings where required andpointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on stone walls complete all as specified and directed. |
| 45 | S&F for 15mm bore tubes medium grade galvanised with and including all GI fittings (such as bends, elbows, tees, connectors, short pieces, back nuts, unoins, caps and plug etc) and fixed complete to wall and ceiling or laid in/on floors complete including taking down old steel tubing complete all as specified and directed. |
| 46 | S&F for 20mm bore tubes medium grade galvanised with and including all GI fittings (such as bends, elbows, tees, connectors, short pieces, back nuts, unoins, caps and plug etc) and fixed complete to wall and ceiling or laid in/on floors complete including taking down old steel tubing complete all as specified and directed. |
| 47 | Demolition and breaking up drain pipesany size (Salt glazed ware, AC or Reinforced concrete/ PVC) set in cement mortar incl all fittings ucomplete all as specified. |
| 48 | Demolition and breaking up drain pipesany size (CI) set in cement mortar incl all fittings up to 4 floors height including necessary scafolding or mechanical arrangements by contractor complete all as specified. |
| 49 | S&F 110mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall or laid in floors complete all as specified. |
| 50 | S&F 100mm stack clamp out of 50mm by 5mm flat iron and 16mm dia around iron stamp and including bolts and securing ends of clamp to wall or roof. |
| 51 | S&F 100mm dia cast iron Floor trap complete all as specified |
| 52 | M&L for slat glazed stoneware gully traps square or round mounted type \"P\" 150x100mm complete all as specified and directed. |
| 53 | S&F for CP Grating complete all as specified and directed |
| 54 | Demolition of brickwork built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed. |
| 55 | M&L for brick works with fly ash bricks old sizestraight or curved on plain exc mean radius built in cement mortar 1:6 complete as directed. |
| 56 | M&L for Half Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius inhalf brick thick walls built in cement mortar 1:6 complete all as specified and directed. |
| 57 | Taking down of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/ slabs/ blankets any thickness, including cover fillets. complete all as specified. |
| 58 | Exposed metal frame ceiling with 6mm calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 x600mm and grid 6mm thickcomplete all as specified. (Frame work for ceiling shall be measured and paid separetly) |
| 59 | M&L for Anodised aluminium snap grid 605x605mm frame work for false ceiling all as specified Hangers 6mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 60 | Taking down/dismantling old particle board or any board kitchen cabinet with wardrobe including fillets and making good disturbed surfaces all assessary complete all as specified. |
| 61 | M&L for Modular kitchen & Wardrobe / cupboardwith 18mm thick one side decorative and other side balancing lamination factory pressed HDHMR Board levies of action Tesa and equivalent including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc with auto closing spring loaded hinges (hydraulic type) etcor sliding with track arrangement as directed including necessary accessories like stainless steel handle, Magnetic catch etc and steel baskets of required size mounted on suitable channels withball bearing to moving of baskets smoothly including all necessary fittings and fixture and8mm thick both sides PrelaminatedBSB (Both side balancing proper ) HDHMR of Action Tesa and equivalent as per IS:14587:1998 fixed including dismantling of existing complete all as specified. Note:-Kitchen accessories ie baskets, cutlery baskets will be measured and paid separately as supply only. |
| 62 | S&F in repairs Drappery curtain rods decorative type stainless steel 25mm nominal dia of approved quality including fixing oftwo number decorative brackets fixed in brick/concrete wall, Two number of latto on both ends of curtain rods complete all as specified and directed. |
| 63 | S&F for Stainless Steel Hinges 50mm long fixing to timber frame work including necessary cutting and Stainless steel screws complete all as specified and directed. |
| 64 | S&F 2nd class hard wood plain fillets square, rectangular or triangular in section of size exc 13 and n exc 25 Sqcm , wrought, secured with nails or brads to wall, column etc |
| 65 | S&F in magnetic catches with steel body ‘H’ type, fixed to shutter complete. |
| 66 | S & F in repair soft close heavy duty steel nickel plated telescopic drawer channel size 20 inch full extension load capacity 50 Kgs including fixing arrangement to drawer/ baskets etc completed all as specified and directed. |
| 67 | S&F 40mm dia and 75mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts, screw and washer of mild steel bright finished, complete all as specified. |
| 68 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as Specified. |
| 69 | M&L for Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 70 | M&L for preparation of new of previously untreated steel and Iron surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed. |
| 71 | Demolition of cement concrete of any description and in any position(unreinforced) in ground floors below or above ground level n.exc 15 cm thick and clearing rubbish from site all as directed and specified. |
| 72 | M&L for 40mm thick Cement concrete 1:4:8 type D-2 as in floor, sub base complete all as specified and directed |
| 73 | M & L 75mm thick Cement concrete 1:3:6 (40mm graded aggregate)in drainsand surface channels including necessary form work complete all as specified and directed. |
| 74 | M&L 75mm thick Cement concrete 1:3:6 (40mm graded aggregate)in flooring or plinth protection including surfaces to be finished even and smooth without using extra cement complete all as specified and directed. |
| 75 | M&L for extra firming fair finishes drain or channel 30cm inner grith in cement concrete using extra cement including forms moulds mitred stopped ends etc. complete all as specified and directed. |
| 76 | M&L fo vibro compacted precast concrete interlocking paver block any shape and size confirming to IS-15658 - 2006 of 60mm thickness M-35 grade with gray cement and pigment, complete all as specified and directed. |
| 77 | M&L for Chequered cementconcrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors laid over 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed |
| 78 | Taking down cement or cement lime plaster on brick or stone walls/ etc including raking out joints, hacking for key, scrubing down with water complete all as specified and directed. |
| 79 | M&L for rendering 15mm thickin cement mortor 1:4 on brick/ concrete surfaces with water proofing compound and finishing the surface even and fair without using extra cement complete all as specified directed. |
| 80 | M&L for rendering 10mm thick cement plaster in cement mortar (1:6) finished even & smooth withoutusing extra cement on brick/concrete surfaces complete all specified and directed. |
| 81 | M&L for prepration of new plastered surfaces of wall/ Ceiling and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/ Old surfaces.complete all as specified and directed. |
| 82 | M&L for preparing New plasteres surfaces Wall and applying of Birla/JK white wall care putty approx 2mm thickon Wall as per manufacturer\"s instruction on existingprepared surface and make the surface smooth by rubbing with sand papers etc and applying two coats of oil emulsion distemper overa coat of primer paint on Wall complete all as specified and directed. |
| 83 | M&L for Rendering 5mm thickwith water proofing compound incement mortar 1:3on fare faces of brick work or concrete surfaces and finished the surfaceeven and smooth without using extra cement in ceiling/ Chajjas complete all as specified. |
| 84 | M&L preparation new plastered surfaces of ceiling and applying three coats of white wash all as specified and directed. |
| 85 | Dismantling of plain or corrugated AC sheeting any guage thickness including nainital or similar pattern roof covering complete all as specified and directed. |
| 86 | S&F Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified. |
| 87 | S&F Pre-Painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified. |
| 88 | S&F steel work in tubler trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade st-240 all as specified and direcred. |
| 89 | M & L for Double action floor spring hydraulically regulated made up of minimum 1.25mm thick Aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed. |
| 90 | Dismantling of Brick tiles or terracing tiles, single layer on roofs. |
| 91 | Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof). |
| 92 | Cutting out cracks to V-section in existing roofs or terracing surfaces, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight),complete all as specified and as directed. |
| 93 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for inserting APP membrane, concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick wall. |
| 94 | M&L for providing cement concrete type 1:2:4 type B-0(12.5mm graded agg ) as in roof kerbs, Roof slab padding, or mud stops, filling of hold fasts and door frames, rounded or chamfered on edges complete all as specified. |
| 95 | M&L for 10mm thick Cement plaster on surfaces of concrete in CM 1:4 on roof surfaces (Over PCC Padding) with WPC (WPC shall be measured and paid separately) |
| 96 | Supply only of liquid water proofing compound complete all as specified and directed. |
| 97 | Providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/ vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge.Make: SmartCare Damp Proof of Asian Paints or equivalent in Berger and Nerolac.Notes:- (1) The work shall be executed through authorised applicator of manufacturer only. (2) Authrised Applicator shall be approved by GE before starting of work. (3) All materials shall be procured directly form manufacturer. (4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a periodof Eight yearsin favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer. |
| 98 | M&L preparation of new plastered surfacesand applyingtwo coats of colour wash on external surfaces of walls complete all as specified and directed. |
| 99 | M&L complete removalof existing surfaces and preparation of oldplastered surfacesand applying two coats of colour wash on external surfaces of walls complete all as specified and directed. |
| 100 | Surface excavation in soft/loose soil, not exceeding 30cm deep and averaging 15cm deep and getting out, complete all as specified. |
| 101 | Removing excavated material n. exc. 50m and depositing where directed at a level n. exc. 1.5m above the starting point. |
| 102 | M&L for Hardcore of gauge n exc. 63mm, broken stone or boulders deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 103 | M&L 100mm thick Plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate)as in sub base of Paver blocks complete all as specified and directed. |
| 104 | M&L 100mm thick Plain cement concrete 1:2:4 type B2 (using 40mm graded stone aggregate)as in sub base of Paver blocks complete all as specified and directed. |
| 105 | M&L 50mm thick Sand filling under floors or in foundations including watering and consolidationcomplete all as specified and directed. |
| 106 | S&F for factory made uPVC white colourThree track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45mm & sash 46 x 62mm both having wall thickness of 2.3 ± 0.2mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note:- (SER NO 3, 4 & 5) : For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 107 | S&F for factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50mm & sash 47 x 68mm both having wall thickness of 1.9 ± 0.2mm and single glass pane glazing bead of appropriate dimension (Area of window upto 0.75 sqm.) comprising of uPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casementhandles, G.I. fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately) |
| 108 | S&F for factory made uPVC white colour fixed glazed window/ventilator made of (small series)frame 47 x 50mm mullion 47 x 68mm both having wall thickness of 1.9 ± 0.2mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). |
| 109 | Taking down old unserviceable point wiring from existing conduit (light fan, socket or powder) complete such as switches, ceiling rose, pendent regulated and socket etc and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc complete |
| 110 | Taking down old unserviceable main switch DB SPN/TPN/MCB DB existing complete |
| 111 | M&L for point wiring with 1.5 Sq.mm (nominal size) single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLSH electrolytic copper conductor cable confirming to IS 694:2010 with andincluding continuous earth wire of size 1.5 Sqmm (nominal size) single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH electrolytic copper conductor cable and connected to earth dolly, colour coded as per IS 11353: 1985 drawn through and in rigid non-metallic PVC concealed conduit of 20mm dia (Nominal bore) or higher, medium grade confirming to IS 9537(Part 3): 1983 complete with and including all PVC conduit accessories and factory made not less than 1.2mm thick sunken modular flush sheet galvanized metal enclosure having zinc coating not less than 120 GSM confirming to IS 14772 : 2000 having op, bottom, side and back-wall knockouts for conduit entry from any direction, suitable modular cover plate with frame and making good of disturbed surfaces of wall/ceiling/floor etc complete all as specified in IS 732: 2019 for point controlled by one, one way switch 06 Amps, complete all as specified and directed. |
| 112 | One light point controlled by one, one way switch |
| 113 | One ceiling/ exhaust fan point controlled by one, one way switch |
| 114 | One socket outet point 5 amps on the independent board |
| 115 | One socket outet point 5 amps on the same board |
| 116 | All as per the description of serial Item No 111 above but point wiring with 2.5 Sqmm single core FRLS cables and earth continuity wire of 2.5 Sqmm single core FRLS cable for one 3 pin 15 Amps socket out let point controlled by one, one way switch on independent board complete all as specified and directed. |
| 117 | S&F modular switch, 06 Amps, single pole, one way, 230 volts, one module and IP 20 protection complete |
| 118 | S&F modular socket outlet 03 Pin, 06 Amps, 02 module with shutter complete |
| 119 | S&F modular switch, with indicator, 16 Amps, single pole, one way, 230 volts complete |
| 120 | S&F modular socket outlet 02 in 01, 03 pin,16 Amps, 02 module with shutter complete |
| 121 | Supply and fixing in replacement of lamp holder, 230 volt AC,PVC / Polycarbonate type with back plate suitable for batten fitting including 9W LED bulbinverter type upto 04 Hrs back up 6500 K complete all as specified & directed. |
| 122 | S&F ceiling rose surface type bakelite 65x50mm three terminal complete |
| 123 | S&F in repair surface/ceiling mounted LED panel type of size 2ft x 2ft, 36W, 230V, 5700K complete with driver full window glarefree opal diffuser LED panel with CRCA powder coated white housing complete with all accessories required for connection and making good the disturbed ceiling complete |
| 124 | S&F in replacement surface/wall mounting LED batten luminaire with following specifications :-(a) System Power : 20W(b) Length : 4ft(c) Housing : Epoxy powder coated white extruded aluminium channel(d) Diffuser : Milky white Polycarbonate(e) Rated Voltage : 240V(f) Safe operating Voltage : 140V to 270V(g) Rated Frequecy : 50 Hz(h) Power Factor : ≥ 0.95(j) THD : ≤ 10(k) Operating Temp : - 10 deg C to + 45 deg C(l) Lumen Efficacy of LED : ≥ 120 Lm/W(m) System Luminous Efficacy :≥ 100 Lm/W(n) CRI : ≥ 80 (o) CCT : 5700K(p) Driver : Integral SMPS based constant current type with short circuit , surge voltage protection upto 2.5 KV. (r) IP rating : 20(s) IK rating : 03 |
| 125 | Supply and Fixing in replacement of surface and wall mounted LED batten 10 watt 2 feet longextruded aluminium housing provided for efficient heat dessipation with polycarbonate diffusser and integrated electronic drivesuitable for mirror fittings, all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete all as specified and directed. |
| 126 | S&F in repair LED inverter type Bulkhead luminaire 10 watt of polycarbonate housing, Battery (Li-Ion type, MinimumNominal Capcity:5200mAh, Minimum Backup: 02 Hrs) and enclosed with acrylic diffuser IP-65 protection incl connection complete all as specified & directed |
| 127 | Supply and fixing of exhaust fan, steel body, AC, single phase, 230 V of size 300mm sweep with blades, frame & louver having 1400 RPM speed, 1600 CMH and taking down old exhaust fan and depositing to MES store yard and making good to the disturbed surfaces to match the existing completeall as specified and as directed. |
| 128 | S& F in replacement LED Inverter type bldg security light fitting complete with mounting bracket made out of light grade GI pipe 40mm bore 1.20 mtr long bend to shape including 02 Nos of 40x5mm FI clamps with GI bolt, nut, washer and 3-core copper cable connection from ceiling rose to light fitting. Specification of light fitting are as under :-(a) System Power : 35 W(b) Housing : Pressure die cast aluminium alloy having separete optical & control gear compartment, top opening, polyster powder coated after phosphochromate treatment (c) Optics : Polycarbonate UV stabilised with integrated lens(d) Light source : SMD LED module mounted on MCPCB(e) Rated Voltage : 240V(f) Safe operating Voltage : 140V to 270V(g) Rated Frequecy : 50 Hz(h) Power Factor : ≥ 0.95(j) THD : ≤ 10(k) Operating Temp : - 10 deg C to + 50 deg C(l) Lumen Efficacy of LED : ≥ 140 Lm/W(m) System Luminous Efficacy :≥ 100 Lm/W(n) CCT : 5700K(o) Driver : Inbuilt SMPS based constant current type with protections for output open / short circuit , phase to phase, over voltage & surge voltage upto 10KV.(p) IP rating : 66(q) IK rating : 07(r)Battery (Li-Ion type, MinimumNominal Capcity:5200mAh, Minimum Backup: 02 Hrs) complete. |
| 129 | M&L submain wiring with 2 run of 06 Sqmm (nominal area) FRLS PVC insulated, unsheathed and stranded copper conductor cable ISI marked drawn in to PVC conduit with and including independent 6 Sqmm (nominal area) FRLS PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB complete.Note:- Two run for neutral and phase and one run for continuous earth wire shall be measured as one run for payment purpose. |
| 130 | All as per the description of srl item No 125 above but with 4 sqmm and 4 sqmm as earth wire |
| 131 | S&F sheet metal enclosure distribution board, single pole and neutral, AC, 240 volts, 12 way, with 200 Amps rated copper bus bar and metal door with IP - 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing surface complete |
| 132 | S&F sheet metal enclosure distribution board triple pole and neutral (VTPN), AC, 440 volts, 04 ways with 200 Amps rated copper bus bar and metal door with IP 43 & IK 09 protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete all as specified and directed and comprising of the following:- (a) MCCB, 100 Amps, 04 pole, AC, 415 Volts of 16 KA breaking capacity complete - 01 No. (b) MCB, SPN/SP 63A, AC,240 volts - 12 Nos. |
| 133 | S&F (in replacement) MCB, SPN, AC, 230 volts of 63 Amps capacity \"C\" curve, 10 KA breaking capacity and making connections by using copper lugs complete |
| 134 | S&F (in replacement) 240 V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, in the MCB DB complete with connection testing and commissioning complete. |
| 135 | M&L (in replacement) for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick directly buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below the ground level connected to GI strip 25 x 4mm by means of bolts nuts check nuts and washers of galvanised iron at 2 points & GI pipe 40mm bore light grade for protection of earthing wire PCC chamber 1:3:6 (type C-1) using 20mm graded stone aggregate, watering pipe 20mm bore light grade,funnel with wire mesh, 50mm thick cover of RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm MS bars at 150mm centre to centre both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR part-I and including excavation & earth work & connecting the earthing point/equipment and testing complete |
| 136 | Supply & fixing ofindustrial type SPN enclosure with a two pin and earth plug and socket complete with and including MCB, SP, AC, 230 volts of 20 Amps, \"C\" curve 10 KA breaking capacity and flush to wall including all cuttings & chases etc in wall and making good to the disturbed surfaces to match the existing complete all as specified & directed. |
| 137 | Supply, Installation, Testing and Commissioning of 1200mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 220 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required including connecting up with twin core flat flexible copper conductor cable of suitable size with connector block to ceiling rose and deposit in E/M store yard complete all as specified and directed |
| 138 | Excavation in trenches not exc 1.5 Mtr wide and n.exc 1.5 mtr in depth, getting out in loose/soft soil for laying of cable complete all as specified & directed |
| 139 | Sand cushioning to under ground cable with a layer of sand 8 cm before laying the cable and 15cm after laying the cable (10 cm punned thickness above the top of the upper most cable, total 18 cm), complete all as specified and directed. |
| 140 | Sub class ‘B bricks, old size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning, with width equal to the length of the brick, complete all as specified and as directed |
| 141 | Removing surplus excavated soil to a distance n.exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above starting pointcomplete all as specified and directed |
| 142 | Returning, filling in, soil obtained from excavation including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed |
| 143 | Supply and laying in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor ofsize 50 sqmm 3.5 core nominal cross section complete Note:- Excavation & earth work, sand cushioning, bricks protection & GIpipe where required shall be measured & paid seperately. |
| 144 | Supply and fix electric water heater, storage type 25 ltrs capacity, BEE 5 star rated, vertical type with suitable size of fastner and incl provision and connecting up of SS braided pipe with adapter for inlet and outlet water connection, copper element corrosion resistance antiscaling magnesium anode having adustable knobe for temperature control and inner tank material of superior glass lined tank and outer body material ABS with high pressure with standing capacity upto 8 bar pressure having heating element 2 KW and minium two year warranty on product, minimum three years on heating element complete all as specified and as directed.(Note : Old/ unsv Geysers to be deposited in MES store) |
| 145 | Taking down old unsv fan of any type/size and depositing in AGE E/M store yard complete all as directed by Engr-in-Charge |
| 146 | Taking down old unsv submain wiring of any size and type complete all as specified and directed |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
