|
| 1 | Dismantling of asbestos cement ( corrugated or semicorrugated etc ) sheets in roof covering |
| 2 | Dismantling of unframed work timber scantling in fillets, rails, post rafters purlins etc under 40 sq cm in section |
| 3 | M & L mild steelrolled section as main and cross beams, hip and jack rafters, purlin where connected to common rafter and runinig rail and guids for sliding door cleats or other conneting plates Fe 410Gde 250 quality A complete all as specified and as directed. |
| 4 | S&Ffor Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and as directed |
| 5 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 6 | Dismantlingof wall ceiling boards (fiber pulp insulation ,etc) or insulation boards /slabs/blanket any thickness ,including cover fillets |
| 7 | Supply & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with DUNE (MICRO LOOK) EDGE TILES WITH ARMSTRONG XL 15 mm EXPOSED STEEL ANGLE. The tiles should have Humidity Resistance (RH) of 99%, NRC Upto 0.5, Light Reflectance >85%, Thermal Conductivity k = 0.052- 0.057 w/m K, Colour White, Fire Performance Class 0/Class1 (BS 476 Part 6&7) in module size of 600 X 600 X 16 mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 38-41%.The steel angle should be of “Armstrong” make with 15mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32, 27 and 27mm and a load carrying capacity of 7.5 Kgs/Sqm. The T Sections have a Galvanizing of 90 grams per Sqm & passed through 500 hrs of Salt test ,Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centre to centre copmlete all as specified and directed according to manufacturers instruction and Complete all as specified and as directed. |
| 8 | S&F 12 mmFibre insulation boards, ordinary type,. and fixed to timber frame work with nails/screw complete all as specified |
| 9 | Demolition of cement concrete(unreinforced)of any description and in any position not otherwise specifically provided for roof complete all as specified and directed. |
| 10 | M&L for 50 mm avg thick PCC padding in cement concrete type B0 (1:2:4) using 12.5 mm graded stone aggr mixed with WPCas per Manufactures instructionsfinished surface even and smooth without using extra cement for laying of WPT all as specified and directed. (WPC will be measured and paid separately). |
| 11 | M&L 10mm thick rendering on roof in CM 1:3 mixed with WPC as per manufacturer\"s instructions of cement for finished even and smooth without using extra cement over PCC surface forlaying APP membrane on roof(WPC will be measured and paid separately). |
| 12 | M&L for water Proofing treatment to roof slabs by applying one coat of bituminious/polymerized primer confirming to IS-3384 @ 0.40 Ltrs/Sqm, 3 mm thick APP modified polymeric membrane of weight of 3 kg/sqm with non-woven polyester reinforcement shall be laid over a coat of bitumen S-35 grade (30/40) applied @1.20Kg /Sqm (minimum) with minimum75 mm side overlaps and minimum 100 mm end overlaps, joints & overlaps shall be sealed by torch application and applying one coat of aluminium paint @ 0.11 Kg/Sqm over APP membrane complete all as specified and directed by Engr-In-Charge (Note: the primer and the membrane to be used shall be of the same manufacturer and to be applied by authorized applicator of OEM). |
| 13 | Supply only Internal water proofing compound (Liquid type) all as specified and directed. |
| 14 | M&L Cement concrete type B0 1:2:4 (12.50 mm graded stone aggregate) as in Coping, rounded or chamfered on edgescomplete all as specified and as directed. |
| 15 | Demolition of stone slabs and tiles of any description or thickness in floors & wall, laid bedded & pointed in any mortar. |
| 16 | Demolition of cement concrete (unreinforced) in ground floor and pavings n.exc.15 cm thickness (below or above ground level) and removing from site all as specified and directed. |
| 17 | M&L for 25mmthick PCC sub base in cement concrete type B0 (1:2:4) using 12.5 mm graded stone aggrfor laying tiles complete all as specified and as directed. |
| 18 | M&L fornon skid coloured ceramictile 7 to 8 mm thick area of each tileexceeding0.06 sqm but not exceeding 0.11 sqm , as in floors etc set over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes withCM 1:6 including necessary adhesive (Tile pattern and decoration may be as suggested by Engineer-in-charge) |
| 19 | M&L fornon skid coloured ceramictile 7 to 8 mm thick area of each tileexceeding0.18 sqm but not exceeding 0.38sqm , as in floors etc set over and including screed bed or bedding layer of mortar 15 mm thick for laying floor finishes withCM 1:6 including necessary adhesive (Tile pattern and decoration may be as suggested by Engineer-in-charge) |
| 20 | All as per item No 18 above but as in skirting etc set over and including 10 mm thick rendering withCM 1:4 including necessary adhesive (Tile pattern and decoration may be as suggested by Engineer-in-charge) |
| 21 | M & L for Glazed ceramic coloured walls tilesin vertical surfaces 300x450x 6mm to 7 mm thick set over and including10 mm thick rendering on vertical surface of wall or concrete surfacesin CM 1:4 to receive wall tiles including necessary adhesive (Tile pattern and decoration may be as suggested by Engineer-in-charge). |
| 22 | M & L for 75 mm thick PCC 1:3:6mix type C2 using 40mm graded stone aggregate as in paving finishing cone surface (plinth protection) even and smooth without using extra cement. |
| 23 | M&L Granite (of any type and colour) work (table rubbed and polished) 18 to 20mm thick in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to matchover15mm thich screed bed or bedding layer of mortarin Cement mortar1:4 complete all as specified and directed. |
| 24 | Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5sqm each |
| 25 | Taking downshutter from the frame) exc 1. Sq m but n.exc 2.00 Sq m each |
| 26 | Taking downshutter from the frame) and refixing in same position Exc 1. Sq m but n.exc 2.00 Sq m each |
| 27 | S & F 35mm thick 2nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc squares withsash bar of framing plain, chamfered or rounded, fitted with cut ,mitered andmoulded beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to chowkats. |
| 28 | M & L for preparing newwoodensurface of any description not otherwise described over 10cm width or girth and applyingtwo coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 29 | M & L for preparing newsteel surface of any description not otherwise described over 10cm width or girth and applyingtwo coats of synthetic enamel paint over a coat of red oxide primer. |
| 30 | S&Fsteel helical door spring 300mm ordinary rat tail rod pattern springs including roller plate complete all as specified and directed. |
| 31 | S&F of Powder coated aluminium frame (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 32 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 33 | S&F 4.00mm thick figuredglass, pin head typeand glazing with rubber beading or with glazing clips n exc 0.5, all as specified and directed. |
| 34 | S&Fstainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples. |
| 35 | S & F 150 mm Aluminiumhandles, febricatedtype anodised or fixing to door/cupboard/kitchen cabinet etc,completeall as specified and as directed. |
| 36 | M&L for 100mm butt hinges of stainless steel grade 202, 14 gauge thickness, medium weight of approved make fixed with pressed steel door frame/Angle iron frame/PVC door frame with screw complete all as specified and directed. |
| 37 | S & F200 mm long aluminium anodised barrel tower bolt fixed to wiremesh door and equivalent all as specified. |
| 38 | S&F floor door stopper of stainless steel and tongue, overall length of cover plate 140mm anodised with hard drawn steel spring, fixed in floors complete all as specified and directed. |
| 39 | S&F of 300 mm long aluminium anodised sliding door bolt with hasp and staple and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed. |
| 40 | S&F in repair 25mm dia stainless steel tubular curtain rodnot less than 0.90 mm thick andfency type socket fixing with brackets, stop, rollee etc co 1 mm thick mplete all as specified and directed.Note: design of socket shall be approved by GE/AGE at the time of execution) |
| 41 | Supply hoisting and fix 1000 ltrs rotational moulded polythene water storage water tanks three layered construction ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I duly ISI Marked, 20mm GI light grade over flow pipe approx length 1.5m long, 20mm GI medium grade pipe for wash out approx length 2.00 mduly plugged at one end shall be provided including dismantling the existing tank complete all as specified. |
| 42 | S & F in repair25mm dia bore gun-metal, globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed |
| 43 | S&F in20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe and fixed (min wt-142 gram) complete all as specified and directed. Make :Symet prayag |
| 44 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge. |
| 45 | S & F20 mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed |
| 46 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal out side MD land all as directed by Engr-in-Charge. |
| 47 | S & F25 mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed |
| 48 | S& F20 mmouter dia boreBrass Tee →(3/4 X ½)→ |
| 49 | S & F20 mm outer dia Male Brass Threaded Adaptor(MTA/ MBTA |
| 50 | S &F20mm outer diaFemale Brass Threaded Adaptor (FTA/ FBTA) |
| 51 | S & F25 mm outer dia Male Brass Threaded Adaptor(MTA/ MBTA |
| 52 | Taking up100 mm dia bore cast iron water mains (including all fittings), with spigot and socket ends and cement joints including burning out joints and recovering complete all as specified and as directed |
| 53 | S & F 110mm borePVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wallall as specified and as directed. |
| 54 | S&F110 bore PVC (SWR) junction single, (Single T) equal or unequal with oval access doors all as specified and as directed. |
| 55 | S & F 110mm PVC (SWR) WC connector with lip ring all as specified and as directed. |
| 56 | S & F 110mm PVC (SWR) WC connector bent type to fit WC outlet all as specified and as directed. |
| 57 | S & F75mm PVC (SWR) floor trap, plain with CP grating including jointing with solvent all as specified and as directed. |
| 58 | S& F in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed. |
| 59 | S & F stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays incliding bolts and nuts and securing ends of stays to walls and roofs for 110mm bore pipe all as specified and as directed |
| 60 | S & F 110mm PVC (SWR) vent cowl all as specified and as directed |
| 61 | S&F Vitreous China wash down water closet pan (Europion pattern), white (excluding fixing bolts, flushing cistern and flush pipe) squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor. complete all as specified and as directed. |
| 62 | S&F in repairs Plastic water closet seat cover, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 63 | S&F in repairs PVC flushing cistren low level, 10 ltr capacity with syphonic action type ball valve. Incl inlet ball valve,PVC band (flush pipe) 32mm complete all as specified. |
| 64 | S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever bracket and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified. |
| 65 | Supply & Fix in repairs stainless steel wall mounted plate rack of size 900x750X 220 mm and thickness of sheet not less than 0.50mm with provn for keeping plates and other crockeryfixed with screw and rawal plug etc on wall complete all as specified and as directed |
| 66 | S & Fin repairs under counter basin oval typeivory coloured size(550X400)mmand fixed in 18 mm thick polishedgraniteall as specified and as directed. Note: ( Granitetop shall be measured and paidfor separately). |
| 67 | S&F in repair Vitreous China squattinhg pan \"Orissa pattern size 580 x 440 mm white with integral foot rest and including conection to trap and fushing pipe etc complete completeall as specified and as directed. |
| 68 | S & F 32 mm dia stainless steel waste coupling for wash hand basin all as specified and directed. Make : Prayag or equivalant. |
| 69 | S&Fin repair 350x450mm size cabinet mirror rectangular shape with 4mm thickselected quality mirror and PTMT frame with openable door shutter with PTMT frame outside mirror as complete.Make : Prayag & equivalent. |
| 70 | S&F in repair CP soap dish fixed to wall with brass chromium plated screws complete all as specified and directed. |
| 71 | S & F in repairs 20mm dia brass chromium plated tubular towel rail 600mm long complete. |
| 72 | S&Fin repairglass shelf with chromium plated guard complete all as specified and directed. |
| 73 | S& F in repair 25 mm bore dia stop valves, cast copper alloy,but fancy Type, chromiumplated with longshankandcup (concealed type) screwed both ends forironpipe orforunions and fixed complete aa as specified |
| 74 | S & F in repairstop valves/Angle valve15mm bore fancy type chromium plated screwed both ends for iron pipe or for unions and fixed |
| 75 | S & F125mm dia chromium plated shower rose with swivel joints including fixing to steel pipe orGI union complete |
| 76 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 77 | S & Fin repair 15mm bore chromium plated fancy typetwo way bib tap long body, screwed down, high pressure for iron pipe or for brass ferrule |
| 78 | S & Fin repair 15mm bore chromium plated fancy typebib tap long body with nosel suitable forwashing machine, screwed down, high pressure for iron pipe or for brass ferrule |
| 79 | S&F in repairs 15mm bore central holewashhand basin brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed ( Make: Jaquar(cat part No SOL-6359or equivelent in ESS, Prayag (Cat Part -7814N) |
| 80 | S&Fin repair15mm dia bore wall mounting brasschromium plated wall mixerwith pops up hand showerfor mixing hot and cold water screwed down for iron pipe and fixedcomplete all as specified and as direcred.. |
| 81 | S & FPVC connections 15mm size with PTMT nuts of length 450mm |
| 82 | S & FPVC connections 15mm size with PTMT nuts of length 600mm |
| 83 | Demolition brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc, |
| 84 | M&L Brickwork with sub class ‘B’ bricks straight or curved on plan exc 6 mmean radius built in CM 1:6 |
| 85 | Taking down cement plaster on brick/concrete surface including racking out joints hacking for key scrubbing down with water etc. |
| 86 | M & L Rendering 10 mm thick onfair faces of brick work or concrete surfaces of wall in cement mortar 1:6 for finished even and smooth (without using extra cement) |
| 87 | M&L rendering 15mm thick on fair faces of brick work or concrete surfaces with CM (1:4) finished even and smooth by adding water proofing compound as per Manufactures instructions complete without using extra cement.(Note: WPC shall be measured & paid separately ) |
| 88 | M&L Rendering 5 mm thick onfair faces of brick work or concrete sur-faces of ceiling in cement mortar 1:3 for finished even and smooth (without using extra cement) |
| 89 | M & L for complete removal of existing treatement of walls by dust proof wall sanding machine/building walls grinding cleaning machine complete all as specified. |
| 90 | M & L for complete removal of existing treatement ofceiling by dust proof sanding machine/buildingrinding cleaning machinecomplete all as specified |
| 91 | M&L for Preparing new plaster surface applying a layer of 1mm wall care puty on wall andtwo coat of distemper oil emulsion over a coatofprimeron internal walls complete all as specified. |
| 92 | M&L for Preparing new plaster surface of wallapplying three coat of white wash on wall complete all as specified. |
| 93 | M & L prepration of surface on wall and applying Twocoats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces.. |
| 94 | M&L for Preparing new plaster surface apply three coat of white wash on ceiling complete all as specified. |
| 95 | M & L for preparing oldsteel surface of any description not otherwise described over 10cm width or girth and applyingtwo coats of synthetic enamel paint over a coat of red oxide primer. |
| 96 | M & L for preparing oldwoodensurface of any description not otherwise described over 10cm width or girth and applyingone coats of synthetic enamel paint |
| 97 | Demolition of RCC of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 98 | M&L RCC Type Bo 1:2:4(12.50 mm graded stone aggregate) as in slabs supported on walls beam and column in floors, roofs, landings , balconies, canopies, deck slabs and in shelvesetc |
| 99 | M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specifed and as directed. |
| 100 | M & Lfor use & waste of form work to soffits of suspended slab such as roof slab andcanopies or work n.exc. 200mm thick rough finished surface of concrete fleat. |
| 101 | S&F in repairs grating 150mmx150mm made out of stainless steel complete all as specified and directed. |
| 102 | Taking down point wiring and fitting and fixture and refixing in same postion complete all as specifed and as directed . |
