|
| 1 | Notes for Item No: 02 to Item No: 17(i) Work may be required to be carried out in various floors from ground floor to 4 th floor and terrace according to site conditions.(ii) Quoted rate shall be inclusive of Scaffoldings and safety equipments etc.Contractor to quote the rate considering the prevailing site conditions. |
| 2 | M&L for preparation of old decorated surfaces and applying one coat of white wash on walls complete all as specified and as directed. |
| 3 | All as per above item no. 1 but in ceiling surfaces. |
| 4 | M&L for preparation of old decorated plastered or unplastered wall surfaces and applying one coat of oil bound distemper white or tinted including filling of the holes/cracks with wall care putty and finished as required complete all as specified and directed. |
| 5 | M&L for preparation of old decorated surfaces and preparation of surfaces including filling of the holes/cracks on walls with plaster putty and applying two coats of oil bound distemper paint on walls complete all as specified and as directed . |
| 6 | M&L for preparation of old decorated surfaces including for peeling of old putty, scrubbing the surfaces to remove all the loose particles and applying 2 mm thick wall care putty,a coat of primer and applying two coats of oil bound distemper on walls complete all as specified and as directed. |
| 7 | M&L for preparation of oldpainted wooden surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 8 | M&L for preparation of old painted steel surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 9 | M&L for preparation of old decorated plastered surfaces of walls, chajjas, parapets by removing all dirt and loose materials,filling with crack sealing compound of approved make if neededand applying one coat of acrylic exterior paint over a coat of exterior grade primer (Brand Apcolite apex manufactured by Asian or equivalent with similar or superior specifications) |
| 10 | M&L for preparation of old decorated surfaces and applying one coat of plastic emulsion paint onwalls complete all as specified and as directed . |
| 11 | Taking down cement plaster of any description from walls including raking out joints, hacking for key, scrubbing down with water etc. and disposing off rubbish materials outside MD land all as directed. |
| 12 | M&L rendering 15 mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6, finishedeven and smooth without extra cement complete all as specified and directed. |
| 13 | M & L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer etc complete all as specified and directed. |
| 14 | M&L for rendering in CM 1:4, 20 mm thick in two coats (15 mm under coat plus 5mm finishing coat) on brick/concrete surfaces with water proofing compound at the rate of 3% by weight of cement in finishing coat and finishing the surface even and fair. (Note :- WPC will be measured and paid seperately). |
| 15 | Supply only integral waterproofing compound |
| 16 | M&L for preparation of newly plastered surfaces of walls, chajjas,parapets etc and applying two coats of acrylic exterior paint over a coat of exterior gradeprimer (Brand Apcolite Apex manufactured by Asian Paints or equivalent as approved by GE),as per the manufactures instructions and as directed. |
| 17 | M&L for Writing of building number in the format : Permenant buiding no and Quarter no on white backgound with black letters at height specified for letters or figures (block, roman, Italic or Indian) n exc 30 cm high etc complete all as specified and directed. The quoted rate shall include for necessary scaffolding and safety measures. |
| 18 | Dismantiling floor hearth/wall tiling/skirting/dado etc including cement mortar bedding (but not backing) and removing rubbish out off the premises all as specified and directed. |
| 19 | S&F for non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured to match coloured tiles over 20 mm screed bedding in cement mortar 1:4 complete all as specified and directed. |
| 20 | All as per item above but on vertical surfacessuch as skirting / dadosincluding 15 mm thick rendering in CM (1:4) as in backing coat complete all as specified and directed. |
| 21 | S&F for glazed ceramic coloured tiles 300x200x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 15 mm thick rendering in CM (1:4) as in backing coat complete all as specified and directed. |
| 22 | S&F for vitrified coloured tiles of 9-10 mm thick (square / rectangular) area of each tiles not exc 0.36 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured to match coloured tiles over 15 mm screed bedding in cement mortar 1:4 complete all as specified and directed. |
| 23 | All as per item above but on vertical surfacessuch as skirting / dadosincluding 15 mm thick rendering in CM (1:4) as in backing coat complete all as specified and directed. |
| 24 | M&L for cleaning of tile surfaces, preparing the surfaces with suitable priming agents and applying Transparent Waterproof Glue for Leakage, Epoxy Resin for Flooring, Crack Seal Agent Waterproofing for Roof Leakage Solution, Indoor, Outdoor Waterproof Adhesive Sealant suitable to arrest the water seepage from toilets/roof to lower floors after filling the tile joints with white cement all as directed. Make: Unity Brand, Tekcool, belanto or equivalent with similar specifications. |
| 25 | M&L for 25mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 10mm thick backing coat in CM 1:4 including demolition of old granite in any position |
| 26 | Notes for Item No: 27 to Item No: 100The items as mentioned from Item No: 25 to Item No: 98 are Day to Day maintenance items. Complaints againts these items are required to be attended on daily basis. In this regard, contractor is to nominate his authorized agent to collect daily complaints from concerned JE and get them rectified before end of the day. Contractor to keep in their store, the items required on daily basis to address the complaints by end of the day. If the contractor fails to comply to this condition, a recovery of 10% the amount of the particular item shall be levied from the bills payable to him. Contractor to consider this aspect before quoting the rates. |
| 27 | M & L for Resecuring or easing & adjusting without taking down shutters of any description exc 1.00 sqm not exc 2.00 sqm each complete all as specified and directed. |
| 28 | Taking down shutters onlyof any description exc. 1.00 Sqm not exc 2.00 Sqm each etc complete all as specified and as directed . |
| 29 | Taking down Chowkhats or frames not exc. 1.5sq. m each etc complete all as specified and as directed . |
| 30 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing all as specified and as directed. |
| 31 | S & F factory made solid panel PVC door shutter 30 mm thick (style) considting of frame made out of MS tubes for top & bottom rails, MS frames shall covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and both sides prelaminated PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling, of both sides prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading, and jointed together with solvent cment, styles and rails feathered at edges, supplying & fixing in the frame at site as per specification and drawing. |
| 32 | S&F 30mm thick Flush shutters,solid core construction,with block board core and plywood face panels,commercial type on both sides etc complete all as specified and as directed . |
| 33 | S&F 30 mm thick 2nd class hard woodglazed and skelton shutters openrebated and prepared to receive glass and gauze etc but divided into squares with plain ,chamfered or rounded, metred and rebated sash bars any numbersas specified in SSR part I section 8 , clause 8.24 (a) to fitted to chowkhats. |
| 34 | S&F aluminium anodised barrel tower bolt of extruded section 100 mm long fixed in any position etc complete all as specified and as directed. |
| 35 | S & F stainless steel butt hinges medium weight 100 mm size in any position all as specified and as directed. |
| 36 | S&F aluminium anodised barrel tower bolt of extruded section 200 mm long fixed in any position etc complete all as specified and as directed. |
| 37 | S&F extruded aluminium alloy handle fabricated type anodised 150 mm long fixed in any position etc complete all as specified and as directed . |
| 38 | Supply and fix 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding of extruded sections or cast aluminium alloy etc complete all as specified and as directed . |
| 39 | S&F aluminium alloy body and tongue, anodised Floor door stopper 150 mm long with hard drawn spring fixed in any position etc complete all as specified and as directed . |
| 40 | M&L for preparation of new wood surfaces of any description exc 10cm width or girthand applying two coats of synthethic enamel paint over a coat of pink primer etc complete all as specified and as directed. |
| 41 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed. |
| 42 | Hacking out old broken glass (any thickness, size quality or description from wooden/metal frames) glazed with putty or fixed with beads or screws etc complete all as specified and as directed. |
| 43 | S&F float glass 4.8 mm thick and area exc 0.5sqm each pane (cost of jhulla system included) fixed with rubber gaskets in sliding aluminium window shutters or with oil putty in wooden/steel windows etc complete all as specified and as directed. |
| 44 | S & F sheet glass4 mm thick pin headed /figured glassfixed with rubber gaskets in aluminium ventilators or fixing with oil putty in steel/wooden ventilators in square not exc 0.5 Sqm in each pane (cost of using Jhulla system is included) fixed at any position including all necessary fittings etc complete all as specified and as directed. |
| 45 | S & F in repair concealed type locks suitable for aluminium sliding windows of approved colour and pattern and fixed as directed etc complete all as specified and directed. |
| 46 | S & F in repairs Nylon ball bearings fixed to aluminium sliding windows of approved make and pattern etc complete all as specified and directed. |
| 47 | S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples on exisitng wooden beading etc complete all as specified and directed.(Note : The rate shall inculded Jhulla system) |
| 48 | S & F in repairs 20 mm dia Aluminium Powder coated curtain rods cut to lengths as required and fixed including brackets as directed etc complete. |
| 49 | S& F in repairs 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding of extruded sections or cast aluminium alloy etc complete all as specified and as directed. |
| 50 | S&F in repairs aluminium anodised barrel tower bolt of extruded section 100 mm long fixed in any position etc complete all as specified and as directed. |
| 51 | S&F in repairs aluminium anodised barrel tower bolt of extruded section 200 mm long fixed in any position etc complete all as specified and as directed. |
| 52 | S&F in repairs extruded aluminium alloy handle fabricated type anodised 100 mm long fixed in any position etc complete all as specified and as directed. |
| 53 | S&F in repairs extruded aluminium alloy handle fabricated type anodised 150 mm long fixed in any position etc complete all as specified and as directed. |
| 54 | S&F in repairs aluminium alloy body and tongue, anodised floor door stopper 150 mm long with hard drawn spring fixed in any position etc complete all as specified and as directed. |
| 55 | S & F in repairs 100 mm sizealuminium anodised hasp & staplesfixed with screws etc complete all as specified and as directed by. |
| 56 | S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished etc complete all as specified and as directed . |
| 57 | S&F in repair stainless steel chromium plated round knob door lock with all fittings etc complete all as specified and directed. |
| 58 | S&F in repairs standard size EWC white colour with P/S trap white coloured with and including PVC white colouredseat cover including alland connecting to flushing cistern complete all as specified and directed. |
| 59 | S&F in repairsvitreous china orissa pattern water closet white incolour with integral foot rest P/S trap and of size 580mmx440mm all as specified and as directed. |
| 60 | S&F in repair vitreous china WHB flat back size 550x400 mm& supply only pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes including cutting for and pinning in ends of CI brackets and making good wall or floor fitting to match existing complete all as specified and as directed. |
| 61 | S&F in repair vitreous china, 1st quality urinal half stall type, white, with and including brass chromium plated flush pin, 40mm dia brass CP waste coupling and 40mm dia PVC HDPE waste pipe with all other necessary fittings etc complete all as specified and directed. |
| 62 | S&F in repairs 10 ltr capacity low/high levelPVC flushing cistern with and including syphon assembly handle, ball valve, PVC inlet and out let pipe complete all as specified and directed. |
| 63 | S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm |
| 64 | S&F repair fancy type chromium plated brass (long body)bib tap 15mm complete at any position etc complete all as specified and as directed. |
| 65 | S&F in repair chromium plated brassbib tap 15mm complete at any position etc complete all as specified and as directed. |
| 66 | S&F in repair 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixedcomplete all as specified and directed. |
| 67 | S&F in repair 15 mm diapillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes etc complete all as specified and directed. |
| 68 | S&F in repairs 15mm size Stop Valveschromium plated screwed down high pressure with crutch or butterflyhandle screwed both ends etc complete all as specified and as directed . |
| 69 | S&F in repairs 15mm size concealed Stop Valveschromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends etc complete all as specified and as directed. |
| 70 | S&F in repairs 15 mm fancy type heavy weight chromium plated mixer valve with crutch or butterly handle, screwed down for iron pipe or brass ferrule and provision for overhead shower etc complete all as specified and directed.(Make: Prayag) |
| 71 | S&F in repairs Health Faucet with 1 meter CP flexible tube & hook and with all necessary fittings etc complete all as specified and directed. (Make: Prayag) |
| 72 | S&F in repairs 2 way bib cock double handle with flange and all necessary fittings all as specified and directed. (Make: Prayag) |
| 73 | S&F in repairs 450 x 600mm bevelled edged mirror of selected glass 5mm thick mounted on PVC back frame for hinging with chromium plated brass screws and cup washers complete all specified and directed. |
| 74 | S&F in repairs bevelled edged mirror of selected glass 5mm thick of any size and shape mounted on PVC back frame for hinging with chromium plated brass screws and cup washers complete all specified and directed. |
| 75 | S&F in repair D type towel rail 600mm long PTMT fixed with and including chromium plated brass screwes and wooden/plastic cleats complete all as specified and directed. |
| 76 | Supplying & Fixing in repair , stainless steel plate rack standard size 31X36X10 inch ,complete and fixing with rawl plug and steel screws , complete, all as specified and as directed .(Make : Prayag Cat No. P-348 or equivalent model in HINDWARE/SHAKTI/ Blue star |
| 77 | Supply and fix in repair PVC seat cover for EWC white in colour, solid body, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed. |
| 78 | S&F in repairs brass chromium plated shower rose 125mm size with or without swivel joints any size including fixing to steel pipe or union 15mm bore complete all specified and directed. |
| 79 | S&F in repairs bathroom shelf of PTMT fixing with and including chromium plated brass screws and wooden plastic cleats (minimum weight 300gms) to plastered/tiled walls etc complete all as specified. |
| 80 | S & F in repairs CP Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified. |
| 81 | S&F in repair standard quality stainless steel toilet paper holder omplete all as specified. |
| 82 | S&F in repairsgrating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and directed. |
| 83 | S&F in repairs waste coupling 32mm brass chromium plated ISI for WHB/sink complete all as specified and directed . |
| 84 | S&F in repairs waste coupling 40 mm dia brass CP for kitchen steel sink complete all as specified and directed. |
| 85 | S&F in repair white colour PVC drain pipe long socket waste pipe for wash basin / kitchen sink water outletcomplete all as specified and directed. (Make: Prayag) |
| 86 | Servicing of low level flushing cistern, sealing of flush pipe joints and making the cistern fuctional duly checking of alignment of its fittings and fixtures all as specified and directed . |
| 87 | M&L for unscrew and refix the bib tap, pillar tap, stop cock 15mm bore and replacing the wornout washers/spindle etc and making leak proof all as specifiedand directed. |
| 88 | Labour only for unscrewing of existing GI pipe 15 mm/20 mm externally fixed to wall including taking from wall at any height for removing air lock, any blockage, fixing any leakages and refixing in position and making leak proof joints complete all as specified and directed.(Note : The rate shall include Jhulla system with rope). |
| 89 | Taking down GI tubing and connection 15mm dia including cleaning of serviceable pipe for reuse and removal of unserviceable tube from work site all as directed. |
| 90 | S&F15 mm dia bore medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed. |
| 91 | Taking up or down 20 mm bore diaSteel Tubing and connecions fixed to wallsor laid in floors/ trenches etc complete all as specified and directed. |
| 92 | S&F 20mm dia bore medium grade galvanised steel tubing with all fittings fixed to walls, ceilings or laid under floors complete all as specified and directed. |
| 93 | S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed. (Make: Prayag) |
| 94 | S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.(Make: Prayag) |
| 95 | S&F in repairs PVC connections 15 mm size with PTMT nuts of length 750mm complete all as specified and directed.(Make: Prayag) |
| 96 | S&F in repairs Aluminium (extruded section) body Door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters of 851to 1000 mm in width and of weight between 60 to 80 Kgs. |
| 97 | S&F in repairDouble action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy dutyetc complete all as specified and directed . |
| 98 | S&F in repairs mortice lock vertical type of brass of size 100mm 4 lever fixed to aluminium door with complete fittings etc complete all as specified and directed |
| 99 | S&F in repairs 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 100 | S&F in repairs 25mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 101 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified and directed by Engineer -in-charge |
| 102 | M&L for Walling of random rubble, uncoursed well bonded, bedded and solidly hearted as built in Cement mortar 1:4 |
| 103 | M&L for Walling of random rubble, uncoursed well bonded, bedded and solidly hearted as built in Cement mortar 1:4, except stone, stones retrieved from relevant item above. |
| 104 | M&L for Keyed pointing to random or polygonal rubble, uncoursed or brought upto course in Cement mortat 1:4 |
| 105 | M&L for Providing, cement concrete type B-1, 1:2:4 (20mm graded aggregate) in copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 106 | M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc.Note: Where ever repairs to drains is directed to be carried, contractor to clean the drain from silt/debris/soil etc completely and removing them outside MoD land. The rate quoted against drain repair items shall deemed to include for cost of cleaning of drain and removal out side MoD land. Contractor to quote rate accordingly. |
| 107 | Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto for above item. |
| 108 | Demolition of reinforced cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed by Engineer -in-charge |
| 109 | M&L for Providing precast cement concrete type B1 1:2:4 (20mm graded aggregate) set in cement mortar 1:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces |
| 110 | M&L for TMT bars Fe 500 10mm dia and over cut to length bent to shape required including cranking hooking ends and binding with and including MS wire annealed not less than 0.9mm dia complete all as specified and directed. |
| 111 | M&L for Pre-cast cement concrete block masonry type C-1, 1:3:6 (20mm graded aggregate) set in cement mortar 1:4 with solid blocks, exc. 10 cm in width and setting in mortar, complete |
| 112 | Taking down cement or cement lime plaster, any description on brick or stone walls built in cement or cement lime mortar, etc. including raking out joints, hacking for key, scrubbing down with water, etc. |
| 113 | M&L for Rendering 10mm thick in Cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth (without using extra lime or cement) |
| 114 | Demolition of cement Concrete (unreinforced) in ground floors and pavings exc 15 cm thickness (above ground level) all as specified and directed by Engineer -in-charge |
| 115 | Demolition of Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc. |
| 116 | M&L for Hardcore of broken stone of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rammed to a true surface all as specified and directed by Engineer -in-charge |
| 117 | M&L for 100mm thick Cement concrete type B- 2, 1:3:6 (40mm graded aggregate) as in sub base to pavement. |
| 118 | M&L for 50mm thick Sand filling under floors or in foundations including watering and consolidation all as directed. |
| 119 | M&L for laying of Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade fixed with with grey cement and pigment |
| 120 | Labour only for laying of Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade fixed with with grey cement and pigment, blocks retrieved from demolition as per relevant Item above |
| 121 | M&L for laying of Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade fixed with with grey cement and pigment retrieved from demolition as per Item above |
| 122 | Labour only for laying of Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade fixed with with grey cement and pigment, blocks retrieved from demolition as per relevant Item above |
| 123 | M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm / 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors over Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes all as specified and directed. |
| 124 | M&L for 25mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 10mm thick backing coat in CM 1:4 including demolition of old granite in any position |
| 125 | M&L for Cement concrete work in pavement/ hard-standing of flexural strength 40kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less |
| 126 | Finishing surfaces of concrete pavement by brooming complete all as specified and directed. |
| 127 | M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade A complete |
| 128 | Providing and laying at or near ground level, factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. |
| 129 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 130 | M&L for Rolled mild steel grade Fe-410-W (Gde-E-250) quality- B in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) |
| 131 | S&F Steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W (Gde E-250) Quality `A\" complete including Dismantling wrought iron or mild steel work of any description all as specified and as directed by Engr-in-charge. |
| 132 | M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in hangar door /cladding to wall, height n.exc 15m, fixed with self tapping screws including dismantling old one complete all as specified and directed. |
| 133 | M&L for Mild steel Fe-410-W (Gde- E-250) quality-B in flat, round or square bars, in available lengths |
| 134 | M&L for Rolled mild steel grade Fe-410-W (Gde-E-250) quality- B in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 135 | M&L for preparation of new Surfaces of any description, over 10cm in width or girth,not otherwise described and applying one coat of Zinc chrome red oxide primer and two coats of synthetic enamel paint all as specified. |
| 136 | M&L for preparation of old treated Surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat synthetic enamel paint all as specified. |
| 137 | Dismantling of fencing wire mesh, any type |
| 138 | Supply only PVC coated Chain link MS galvanisd fencing, any size or type, to match with existing fencing. |
| 139 | Fixing only new chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire |
| 140 | Fixing of old chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire retrieved from dismantling as above |
| 141 | S&F in repairs Galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) |
| 142 | S&F in repairs, for galvanised mild steel concertina coil fencing with punched taperconcertina coil 600mm dia 10 meter openable length (total length 90m), having 50 rounds per 6meter length, spring core wire 2.5mm dia of high tensile strength of 165Kg/Sqmm with tape 0.52mm thick and weight 43.478gram/meter and fixing the same with existing angle iron frame with 6 horrizontal RBT (Rainforced barbed tape) wire, stud tied with GI stapleand GI clip to retain horrizontal including necessary bolts etc including all necessary scafolding like timbering, planking, struting and props etc complete all as specified and as directed. |
| 143 | Notes for Item 144 to 145: The complete job of the tank cleaning process will be as under:-(i)Mechanical removal of all remaining dirty water by high capacity submersible pump set.(ii)Removal of Sludge by vacuum operated pump.(iii)Cleaning of walls, ceiling and bottom of tank by any high pressure rotary jet 120 bar pressure.(iv)Removal of all dirty particles by industrials wet vacuum cleaner leaving the tank physically cleaned.(v)Contractor must clean and disinfect the water storage tank within 24 hours aftergiving the site by Engr-in-Charge to avoid the disturbance of water supply to the connected area.(vi)In case of any accident during the work in progress the contractor shall be fully responsibleto give necessary medical aids and also compensation to worker under relavant acts.(vii)No extra payment will be made for transportation of any machineries required for cleaning and disinfection the storage tank. |
| 144 | Cleaning of RCC under ground sump of capacity 10000 gallons after draining out water by using pump sets or any other equipment, cleaning the internal surfaces of walls, ceiling bottom etc including by using bleaching powder/liquid chlorine solution and removing the accumulated sludge, dirt, scales etc from bottom and disposal in low lying area of defence land where directed and washout the surfaces with clearwater completely including writing the relevant information like\"Cleaned on Date\", \"Due Date\" & \"Capacity of tanks\" with black paint on white back ground at visible place complete all as specified and directed. |
| 145 | Cleaning of RCCtank 5000 litres capacity after draining out water by using pump sets or any other equipment, cleaning the internal surfaces of walls, ceiling bottom etc including by using bleaching powder/liquid chlorine solution and removing the accumulated sludge, dirt, scalesetc from bottom and disposal in low lying area of defence landwhere directed and washout the surfaces with clear water completely including writing in neat letters the relevant information like\"Cleaned on Date\", \"Due Date\" & \"Capacity of tanks\" with black paint on white back ground at visible place complete all as specified and directed. |
| 146 | Disconnecting of existing rotational moulded polyethylene water storage tanks of cylindrical vertical with closed top type of capacity 250 to 500 litres from roof/top of buildings at any height and from PCC stagings including disconnecting of existing pipe line, ball valve,air pipe etc , setting aside or lowering for Cleaning of tanks by using bleaching powder/liquid chlorine solution and removing scale and dirt etc from tanks and from mouths of circulating pipes etc including writing information like \"Cleaned on Date\"and \"Due Date\" with black paint on white back ground at visible place, hoisting if required, reconnecting and re-fixing in position complete all as specified and directed. |
| 147 | All as per item No 111.00 above, but capacity of tank 1000 Litres |
| 148 | All as per item No 111.00 above, but capacity of tank 2000 Litres |
| 149 | All as per item No 111.00 above, but capacity of tank 3000 Litres |
| 150 | All as per item No 111.00 above, but capacity of tank 5000 Litres |
| 151 | Removing of old unserviceable water storage PVC tank of any typeafter disconnecting of existing pipe line, ball valve, air pipe etc and supply and fix rotational moulded polyethylene water storage tank 500 ltr capacity (cylindrical vertical with closed top) of three layerhoisted and fixed in position at any height including reconnetcing of pipe, ball valve, air pipe etc and testing complete all as specified and directed. |
| 152 | Removing of old unserviceable water storage PVC tank of any typeafter disconnecting of existing pipe line, ball valve, air pipe etc and supply and fix rotational moulded polyethylene water storage tank 1000 ltr capacity (cylindrical vertical with closed top) of three layerhoisted and fixed in position at any height including reconnetcing of pipe, ball valve, air pipe etc and testing complete all as specified and directed. |
| 153 | Removing of old unserviceable water storage PVC tank of any typeafter disconnecting of existing pipe line, ball valve, air pipe etc and supply and fix rotational moulded polyethylene water storage tank 2000 ltr capacity (cylindrical vertical with closed top) of three layerhoisted and fixed in position at any height including reconnetcing of pipe, ball valve, air pipe etc and testing complete all as specified and directed. |
| 154 | S&F in repairs 15mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed. |
| 155 | All as per item No.53 above, but 20mm dia. |
| 156 | All as per item No.53 above, but 25mm dia. |
| 157 | All as per item No.53 above, but 40mm dia. |
| 158 | Taking out existing unserviceable gate valves and supply and fix gun metal gate valve 40 mm diawith iron wheel head screwed both ends for iron pipes/fitting including necessary fittings like GI Tee,nipple etc complete all as specified and directed. |
| 159 | All as per item No.57 above, but 25mm dia. |
| 160 | All as per item No.57 above, but 20mm dia. |
| 161 | All as per item No.57 above, but 15mm dia. |
| 162 | S&F high quality un-breakable hinge type PVC water tank capacity 500-1000 litres, circular shape, weight not less than 500 grams any colouretc complete all as specified and directed. |
| 163 | All as per item No 61 above, but capacity 2000-3000 litres. |
| 164 | All as per item No.61 above, but capacity 5000 litres. |
| 165 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. As in window grill. |
| 166 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 167 | M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamal paint over a coat of red oxide primer. |
| 168 | Taking down GI tubing and connection 15mm dia including cleaning of serviceable pipe for reuse and removal of unserviceable tube from work site all as directed. |
| 169 | S&F15 mm dia bore medium grade galvanized steel tubing with all fittings fixed to walls, ceilings or laid under floors all as specified and directed. |
| 170 | Taking up or down 20 mm bore diaSteel Tubing and connecions fixed to wallsor laid in floors/ trenches etc complete all as specified and directed. |
| 171 | S&F 20mm dia bore medium grade galvanised steel tubing with all fittings fixed to walls, ceilings or laid under floors complete all as specified and directed. |
| 172 | S&F in repairs GI medium grade Tee40x15mm complete all as specified and directed. |
| 173 | S&F in repairs GI medium grade nipple 40mm bore of pipe complete all specified and directed. |
| 174 | S&F in repairs GI medium grade nipple 50mmbore of pipe complete all specified and directed. |
| 175 | S&F in repairs GI medium grade Unions 40mm bore of pipe complete all specified and directed. |
| 176 | S&F in repairs GI medium grade Unions for 25mm bore of pipe complete all specified and directed. |
| 177 | S&F in repairs GI medium grade Reducer 40x25 mm bore of pipe complete all specified and directed. |
| 178 | S&F in repairs GI medium grade Reducer 50x40 mm bore of pipe complete all specified and directed. |
| 179 | Cleaning/clearing blockage in traps of WC\"s, Floor traps, Nanhi traps, Gully traps, Bends (with or without door), T junctions (with or without door), Yjunctions (with or without door)etc in any position and making the sewer system (sewage and sullage) fully functional by suitable modern cleaning techniques etc complete.Note:- Each job shall be carried out in a day to day requirement basis as specified and directed by Engineer-in-charge. |
| 180 | Cleaning/clearing blockage in manholes of any description and size but depth not exceeding 1.80m from GL by suitable modern cleaning techniques etc complete.complete. Note:- Each job shall be carried out in a day to day requirement basis as specified and directed by Engineer-in-charge. |
| 181 | Cleaning/de-sludging of SWG/RCC Sewage lines of any dia not exc 250mm bore of pipe by usingsuitable modern cleaning techniques etc complete including disposal of any sludge/excreta/sullage/sewage in closed tanker and disposing the same to designated places as earmarked by the local bodies or disposing the same under own arrangement of contracotr complete.Note:- This job shall be carried out in a day to day requirement basis as specified and directed by Engineer-in-charge. |
| 182 | De-sludging/De-silting of 300 user septic tank including filter bed by bailing out fluid, decomposed materials sludge etc outside MD land complete all as directed by Engineer-in-charge.Note 1. Sludege/de-composed materials obtained from cleaning shall be removed outside MD land by mechanical sewage cleaning tanks and disposed off to designated places as ear marked by local bodies. Note 2. Rate inclusive of clearing away all grass vegetation, saplings shrubs and trees not exceeding 30cm girth upto 3 mtrs alround the septic tank and removing rubbish upto a distance 50mtrs outside the periphery area. |
| 183 | All as per item No.01, but 50 user septic tank |
| 184 | Cleaning/clearing blockage of soakge well at any depth and any widthfully functional by suitable material like loose filling broken bricks, sand , aggregateetc complete.Note:- Each job shall be carried out in a requirement basis as specified and directed by Engineer-in-charge. |
| 185 | M&L for loose filling with broken bricks in soakage pits, soakage wells . |
| 186 | M&L for precast factory made reinforced cement concretePCC 1:2:4 type B-1 (20 mm graded aggregate)as in manhole/drain cover slabs etc set in CM 1:4 including use and waste of formwork and finishing top surface of cover slab even and smooth using extra cement etc complete all as specified and directed. |
