|
| 1 | Supply of 1.5 sqmm ISI marked,FRLS PVC insulated,single core copper conductor cable |
| 2 | Supply of 2.5 sqmm ISI marked,FRLS PVC insulated,single core copper conductor cable |
| 3 | Supply of 4 sqmm ISI marked,FRLS PVC insulated,single core copper conductor cable |
| 4 | Supply of 6 sqmm ISI marked,FRLS PVC insulated,single core copper conductor cable |
| 5 | Supply of S P, 5/6 A, one way switch, piano type ISI marked |
| 6 | Supply of S P, 15/16 A, one way switch, piano type ISI marked |
| 7 | Supply, 3 pin 5/6 A socket outlet, piano type ISI marked |
| 8 | Supply, 6 pin 15/16 Asocket outlet, piano type ISI marked |
| 9 | Supply of call bell/buzzer, single phase |
| 10 | Supplyof 6A to32A ratings, SP MCB C Curve, 10 KA breakingcapacity |
| 11 | Supply of 63 A, 2 pole isolator |
| 12 | Supply of 40 A, 2 pole isolator |
| 13 | Supply of 40 A, rating, 2 pole RCCB, 30mA |
| 14 | Supply of 63 A, rating, 2 pole RCCB, 30mA |
| 15 | S.I.T.C of LED Tube type Luminaire 20W rating complete with polycarbonate housing batten integrated electronics driver prewired with high efficient LEDs with the following: (a) Total System wattage 20 watt +/- 5% (b) Luminous Efficacy Lumens/watt >=95 (c) power factor >= 0.95. |
| 16 | Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal (Aluminum alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for230 V, 50 Hz, single phase AC Ceiling Fan compliant to IS 374:2019 fan Supply, earthing etc. complete as req 1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) |
| 17 | Supplying,installation,Testing&CommissioningofFloodLight, powdercoatedpressuredie cast aluminum body with built in or separate driver as per the requirement with Driver efficiency >85%,Input voltage: Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95,IP-66,IK-10,CRI>80,undervoltageandovervoltageprotection, EMI-EMCasper CISPR-15,lenses for beam angle 30 deg120deg as per the application and the project requirement deg., suitable tilt able fitting, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumenmaintained tilllife ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K/ 5700°K/6000°K/6500°K(AsperANSIBin), SDCM(Standard Deviation Color Matching) <5, Maximumpowerconsumptionshouldnotmore than the specified rating and Fixture shall be ofrelevant BIS standardcompleteinallrespecti/cconnectionswith1.5sqmmFRLS,PVCinsulatedcopper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty.System lumen efficacy>135lm/Watt 1.17 DELHI SCHEDULE OF RATES (E&M) Volume-II 202515 output . LM79 & LM80 Test reportfromNABLlab foralltestingrequiredforLED fixtures as per BISshall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermalmanagement:heatsinkofaluminumhousing such that LED junction temperature shall not rise above 90°C). 70 W |
| 18 | Supplying,installation,Testing&CommissioningofFloodLight, powdercoatedpressuredie cast aluminum body with built in or separate driver as per the requirement with Driver efficiency >85%,Input voltage: Input voltage: 140-270 Volt AC, freq 50/60 hz, Operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95,IP-66,IK-10,CRI>80,undervoltageandovervoltageprotection, EMI-EMCasper CISPR-15,lenses for beam angle 30 deg120deg as per the application and the project requirement deg., suitable tilt able fitting, life time (LED,Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumenmaintained tilllife ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K/ 5700°K/6000°K/6500°K(AsperANSIBin), SDCM(Standard Deviation Color Matching) <5, Maximumpowerconsumptionshouldnotmore than the specified rating and Fixture shall be ofrelevant BIS standardcompleteinallrespecti/cconnectionswith1.5sqmmFRLS,PVCinsulatedcopper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty.System lumen efficacy>135lm/Watt 1.17 DELHI SCHEDULE OF RATES (E&M) Volume-II 202515 output . LM79 & LM80 Test reportfromNABLlab foralltestingrequiredforLED fixtures as per BISshall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermalmanagement:heatsinkofaluminumhousing such that LED junction temperature shall not rise above 90°C). 150 W |
| 19 | Supply of XLPE insulated PVC sheathed Al. Conductor ArmouredCable 1.1 KV grade conforming to IS-7098 of following size:-3.5C*35sqmm |
| 20 | Supply of XLPE insulated PVC sheathed Al. Conductor ArmouredCable 1.1 KV grade conforming to IS-7098 of following size:-3.5C*70sqmm |
| 21 | Suppy of following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100 Amp, 16 KA,TPMCCB |
| 22 | Supply of following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 125 A, 16 KA,TPMCCB |
| 23 | Supply offollowing rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 150 A, 16 KA,TPMCCB |
| 24 | Supply of following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubiclepanel board including drilling holes in cubicle panel, making connections, etc. as required. 200 A, 25 KA,TPMCCB |
| 25 | Providing labour for repair and maintenance of a lights E.I and Fans etc for repair of defective lamp ,cable ,wiring ,switchgear/MCB box etc .by providing following labour-Wiremans 1 Nos ,Beldars 01 nos in one shift on daily requirement basis per month as per terms and condition of the department. ( 1 nos.x30 daysx11 months= 330 shifts) |
